mirror of
https://github.com/tillitis/tillitis-key1.git
synced 2024-10-01 01:45:38 -04:00
e71d70008b
* Add kicad library for flat programming clip * Add descriptions to part symbols * Add extended values, manufacturer/distributor info to components in mta1 * Add new board entry for TK1 * Add TP1 programmer design * Update MTA1-USB-V1 release files to match production * Change SPI flash memory type to XT25F08BDFIGT-S * Change touch sensor feedback cap to 1uF * Add manufacturer, manufacturer part number, distributor, distributor part number * Update component values for TK1 PCB * Use specific part # for C8 * Change flash back to Winbond part, for easier sourcing * Change C1 to 1pF * Fixes for production programmer PCB * Swap GND and 5V on J3 * Replace graphic logo with text * Rename part to 'TP-1' * TK-1 release * Add dimensions for PCB * Add layer stackup for PCB * Change PCB component origin to match expanded board * Change schematic title to 'TK-1', update release date * mta1-usb-v1-programmer: Add corrected part numbers for OSFC production * Q1, Q2, F1 part subsititutions * add mfr/supplier info for all parts * PCB library: add parts * Rectangular footprint for TK-1 test pads * BOM generation script used for TK-1 and TP-1 releases * TP-1 release * Schematic: Add manufacturer, supplier information for all parts * Schematic: Update name and release date * PCB: Add PCB fabrication information * PCB: Correct pinouts on silkscreen * PCB library: add 'screw' and 'foot' symbols * Screw is a schematic-only part, for including mechanical screws in the BOM * Foot is for self-adhesive rubber mounting feet that can be stuck to the bottom of a PCB * TP-1 release: Add screws, feet to the BOM * Pico library: Add footprint for RPi Pico w/solder paste * TP-1 RevA release updates: * Add fiducials in 3 corners (1mm exposed copper ring w/2mm soldermask opening) * Add solder paste openings to Raspberry Pi Pico pads * TK-1: RevA.1 release * Add two fiducials to TK-1 board * TP-1: Update fuse type to match actual part * Make placement diagrams for TP-1, TK-1 * Update BC-1-xxx footprints to include placement outlines * Update TP-1 PCB with new footprints, clean up top fab layer * Take screenshots of top layers of both boards * tk-1: fix placement footprints * Add pin1 marking for ncp footprint * Add refdes for w25q80 footprint * Update board with new footprints, clear extraneous text on fab layer
27 lines
2.0 KiB
Plaintext
27 lines
2.0 KiB
Plaintext
### Module positions - created on Tue Nov 15 10:47:51 2022 ###
|
|
### Printed by Pcbnew version (6.0.4)
|
|
## Unit = mm, Angle = deg.
|
|
## Side : top
|
|
# Ref Val Package PosX PosY Rot Side
|
|
F1 50mA Fuse_1206_3216Metric 41.5000 79.5000 -90.0000 top
|
|
FID1 Fiducial Fiducial_1mm_Mask2mm 43.0000 2.0000 0.0000 top
|
|
FID2 Fiducial Fiducial_1mm_Mask2mm 2.0000 85.0000 0.0000 top
|
|
FID3 Fiducial Fiducial_1mm_Mask2mm 2.0000 2.0000 0.0000 top
|
|
J1 Conn_01x20 PinHeader_1x20_P2.54mm_Vertical 8.5000 85.0000 0.0000 top
|
|
J2 Conn_01x20 PinHeader_1x20_P2.54mm_Vertical 36.5000 85.0000 0.0000 top
|
|
J3 BC-1-208 BC-1-208 25.7500 4.7500 0.0000 top
|
|
J4 BC-1-701 BC-1-701 18.2500 21.7500 180.0000 top
|
|
Q1 AO3400A SOT-23 3.7000 21.5100 0.0000 top
|
|
Q2 AO3401A SOT-23 3.7000 17.7000 0.0000 top
|
|
R7 10K ERJ2G(0402)_L 1.3000 30.6000 -90.0000 top
|
|
R8 10K ERJ2G(0402)_L 2.5000 14.6000 -90.0000 top
|
|
R11 100R ERJ2G(0402)_L 4.2500 30.6000 90.0000 top
|
|
R12 100R ERJ2G(0402)_L 5.7500 30.6000 90.0000 top
|
|
R13 100R ERJ2G(0402)_L 7.2500 30.6000 90.0000 top
|
|
R14 100R ERJ2G(0402)_L 8.7500 30.6000 90.0000 top
|
|
R15 100R ERJ2G(0402)_L 10.2500 30.6000 90.0000 top
|
|
R16 100R ERJ2G(0402)_L 11.7500 30.6000 90.0000 top
|
|
R17 100R ERJ2G(0402)_L 2.7500 30.6000 -90.0000 top
|
|
U2 Pico RPi_Pico_SMD_reflow 22.5000 61.0000 0.0000 top
|
|
## End
|