tillitis-key/hw/application_fpga/rtl/fw_ram.v

//======================================================================
//
// fw_ram.v
// --------
// A 512 x 32 RAM (2048 bytes) for use by the FW. The memory has
// support for mode based access control.
//
// Author: Joachim Strombergson
// Copyright (C) 2022 - Tillitis AB
// SPDX-License-Identifier: GPL-2.0-only
//
//======================================================================

`default_nettype none

module fw_ram(
	      input  wire          clk,
	      input  wire          reset_n,

	      input  wire          fw_app_mode,

              input  wire          cs,
	      input  wire [3 : 0]  we,
	      input  wire [8 : 0]  address,
	      input  wire [31 : 0] write_data,
	      output wire [31 : 0] read_data,
	      output wire          ready
             );


  //----------------------------------------------------------------
  // Registers and wires.
  //----------------------------------------------------------------
  reg [31 : 0] tmp_read_data;
  reg [31 : 0] mem_read_data0;
  reg [31 : 0] mem_read_data1;
  reg          ready_reg;
  reg          fw_app_cs;
  reg          bank0;
  reg          bank1;


  //----------------------------------------------------------------
  // Concurrent assignment of ports.
  //----------------------------------------------------------------
  assign read_data = tmp_read_data;
  assign ready     = ready_reg;
  assign fw_app_cs = cs && ~fw_app_mode;


  //----------------------------------------------------------------
  // Block RAM instances.
  //----------------------------------------------------------------
  SB_RAM40_4K fw_ram0_0(
			.RDATA(mem_read_data0[15 : 0]),
			.RADDR({3'h0, address[7 : 0]}),
			.RCLK(clk),
			.RCLKE(1'h1),
			.RE(fw_app_cs & bank0),
			.WADDR({3'h0, address[7 : 0]}),
			.WCLK(clk),
			.WCLKE(1'h1),
			.WDATA(write_data[15 : 0]),
			.WE((|we & fw_app_cs & bank0)),
			.MASK({{8{~we[1]}}, {8{~we[0]}}})
		       );

  SB_RAM40_4K fw_ram0_1(
			.RDATA(mem_read_data0[31 : 16]),
			.RADDR({3'h0, address[7 : 0]}),
			.RCLK(clk),
			.RCLKE(1'h1),
			.RE(fw_app_cs & bank0),
			.WADDR({3'h0, address[7 : 0]}),
			.WCLK(clk),
			.WCLKE(1'h1),
			.WDATA(write_data[31 : 16]),
			.WE((|we & fw_app_cs & bank0)),
			.MASK({{8{~we[3]}}, {8{~we[2]}}})
		       );


  SB_RAM40_4K fw_ram1_0(
			.RDATA(mem_read_data1[15 : 0]),
			.RADDR({3'h0, address[7 : 0]}),
			.RCLK(clk),
			.RCLKE(1'h1),
			.RE(fw_app_cs & bank1),
			.WADDR({3'h0, address[7 : 0]}),
			.WCLK(clk),
			.WCLKE(1'h1),
			.WDATA(write_data[15 : 0]),
			.WE((|we & fw_app_cs & bank1)),
			.MASK({{8{~we[1]}}, {8{~we[0]}}})
		       );

  SB_RAM40_4K fw_ram1_1(
		      .RDATA(mem_read_data1[31 : 16]),
		      .RADDR({3'h0, address[7 : 0]}),
		      .RCLK(clk),
		      .RCLKE(1'h1),
		      .RE(fw_app_cs & bank1),
		      .WADDR({3'h0, address[7 : 0]}),
		      .WCLK(clk),
		      .WCLKE(1'h1),
		      .WDATA(write_data[31 : 16]),
		      .WE((|we & fw_app_cs & bank1)),
		      .MASK({{8{~we[3]}}, {8{~we[2]}}})
		     );

  //----------------------------------------------------------------
  // reg_update
  //----------------------------------------------------------------
  always @(posedge clk)
    begin : reg_update
      if (!reset_n) begin
        ready_reg <= 1'h0;
      end
      else begin
        ready_reg <= cs;
      end
    end


  //----------------------------------------------------------------
  // rw_mux
  //----------------------------------------------------------------
  always @*
    begin : rw_mux;
      bank0         = 1'h0;
      bank1         = 1'h0;
      tmp_read_data = 32'h0;

      if (fw_app_cs) begin
	if (address[8]) begin
	  bank1 = 1'h1;
	  tmp_read_data = mem_read_data1;
	end
	else begin
	  bank0 = 1'h1;
	  tmp_read_data = mem_read_data0;
	end
      end
    end

endmodule // fw_ram

//======================================================================
// EOF fw_ram.v
//======================================================================