tillitis-key/hw/boards/tp1/tp1.kicad_pro
Matthew Mets e71d70008b
TK-1 and TP-1 PCBs (#52)
* Add kicad library for flat programming clip

* Add descriptions to part symbols

* Add extended values, manufacturer/distributor info to components in mta1

* Add new board entry for TK1

* Add TP1 programmer design

* Update MTA1-USB-V1 release files to match production

* Change SPI flash memory type to XT25F08BDFIGT-S
* Change touch sensor feedback cap to 1uF
* Add manufacturer, manufacturer part number, distributor, distributor part number

* Update component values for TK1 PCB

* Use specific part # for C8
* Change flash back to Winbond part, for easier sourcing
* Change C1 to 1pF

* Fixes for production programmer PCB

* Swap GND and 5V on J3
* Replace graphic logo with text
* Rename part to 'TP-1'

* TK-1 release

* Add dimensions for PCB
* Add layer stackup for PCB
* Change PCB component origin to match expanded board
* Change schematic title to 'TK-1', update release date

* mta1-usb-v1-programmer: Add corrected part numbers for OSFC production

* Q1, Q2, F1 part subsititutions
* add mfr/supplier info for all parts

* PCB library: add parts

* Rectangular footprint for TK-1 test pads
* BOM generation script used for TK-1 and TP-1 releases

* TP-1 release

* Schematic: Add manufacturer, supplier information for all parts
* Schematic: Update name and release date
* PCB: Add PCB fabrication information
* PCB: Correct pinouts on silkscreen

* PCB library: add 'screw' and 'foot' symbols

* Screw is a schematic-only part, for including mechanical screws in the
  BOM
* Foot is for self-adhesive rubber mounting feet that can be stuck to
  the bottom of a PCB

* TP-1 release: Add screws, feet to the BOM

* Pico library: Add footprint for RPi Pico w/solder paste

* TP-1 RevA release updates:

* Add fiducials in 3 corners (1mm exposed copper ring w/2mm soldermask opening)
* Add solder paste openings to Raspberry Pi Pico pads

* TK-1: RevA.1 release

* Add two fiducials to TK-1 board

* TP-1: Update fuse type to match actual part

* Make placement diagrams for TP-1, TK-1

* Update BC-1-xxx footprints to include placement outlines
* Update TP-1 PCB with new footprints, clean up top fab layer
* Take screenshots of top layers of both boards

* tk-1: fix placement footprints

* Add pin1 marking for ncp footprint
* Add refdes for w25q80 footprint
* Update board with new footprints, clear extraneous text on fab layer
2022-12-22 16:41:46 +01:00

476 lines
12 KiB
Plaintext

{
"board": {
"design_settings": {
"defaults": {
"board_outline_line_width": 0.09999999999999999,
"copper_line_width": 0.19999999999999998,
"copper_text_italic": false,
"copper_text_size_h": 1.5,
"copper_text_size_v": 1.5,
"copper_text_thickness": 0.3,
"copper_text_upright": false,
"courtyard_line_width": 0.049999999999999996,
"dimension_precision": 4,
"dimension_units": 3,
"dimensions": {
"arrow_length": 1270000,
"extension_offset": 500000,
"keep_text_aligned": true,
"suppress_zeroes": false,
"text_position": 0,
"units_format": 1
},
"fab_line_width": 0.09999999999999999,
"fab_text_italic": false,
"fab_text_size_h": 1.0,
"fab_text_size_v": 1.0,
"fab_text_thickness": 0.15,
"fab_text_upright": false,
"other_line_width": 0.15,
"other_text_italic": false,
"other_text_size_h": 1.0,
"other_text_size_v": 1.0,
"other_text_thickness": 0.15,
"other_text_upright": false,
"pads": {
"drill": 0.762,
"height": 1.524,
"width": 1.524
},
"silk_line_width": 0.15,
"silk_text_italic": false,
"silk_text_size_h": 1.0,
"silk_text_size_v": 1.0,
"silk_text_thickness": 0.15,
"silk_text_upright": false,
"zones": {
"45_degree_only": false,
"min_clearance": 0.508
}
},
"diff_pair_dimensions": [
{
"gap": 0.0,
"via_gap": 0.0,
"width": 0.0
}
],
"drc_exclusions": [
"malformed_courtyard|129500000|49000000|90b5a430-ba57-43ad-a0e2-496170af0c4f|00000000-0000-0000-0000-000000000000",
"malformed_courtyard|151500000|101000000|90b5a430-ba57-43ad-a0e2-496170af0c4f|00000000-0000-0000-0000-000000000000",
"silk_over_copper|129517731|118230801|03cd9e72-64ed-4b6c-ba73-58ce597749fc|70341d2a-7d4a-4e85-828f-6f0009865ad8",
"silk_over_copper|131470096|118818179|03cd9e72-64ed-4b6c-ba73-58ce597749fc|70341d2a-7d4a-4e85-828f-6f0009865ad8",
"silk_over_copper|133000000|107570000|a0af37c1-9d94-4222-8d98-681c02a0f0e9|f05ba679-d23d-42b7-b001-03eb17c3bfb7",
"silk_over_copper|133000000|109570000|a0af37c1-9d94-4222-8d98-681c02a0f0e9|a280521c-c74b-4ecf-b9b4-213ba488c164",
"silk_over_copper|133000000|111570000|a0af37c1-9d94-4222-8d98-681c02a0f0e9|88ffbfb3-9878-483c-a550-aedc0a450e53",
"silk_over_copper|133000000|113570000|a0af37c1-9d94-4222-8d98-681c02a0f0e9|9c8b2f50-a3a6-4549-ab6a-bdef1068f086",
"silk_over_copper|133000000|115570000|a0af37c1-9d94-4222-8d98-681c02a0f0e9|f4f8a9fe-a440-43ec-b602-e6d151d14e34",
"silk_over_copper|133000000|117570000|a0af37c1-9d94-4222-8d98-681c02a0f0e9|2d43bc39-9b46-44ea-a11b-604cd85edb13",
"silk_over_copper|133000000|119570000|a0af37c1-9d94-4222-8d98-681c02a0f0e9|0efb60ab-968b-448c-bc7e-1a6ed5f5c35a",
"silk_over_copper|146880000|130930000|3b78f07d-b588-4f2a-b13d-6203a4505860|b8adbe77-8454-4855-9054-7713fdf3190a",
"silk_over_copper|146880000|132930000|3b78f07d-b588-4f2a-b13d-6203a4505860|5bfbfc49-7111-4b81-9ca8-3bd4ef9e5a8e",
"silk_over_copper|146900000|130930000|3b78f07d-b588-4f2a-b13d-6203a4505860|b8adbe77-8454-4855-9054-7713fdf3190a",
"silk_over_copper|150734199|109577156|43adeeda-45a9-49c0-9f1f-746f14391161|b2bf71ba-8702-49f6-9f79-f53c7401c9c8",
"silk_over_copper|151452581|129825000|6853a500-96d2-454b-9700-96a6e895d44c|aa6a93a9-29cd-4f09-b721-64a6aa5605f0",
"silk_over_copper|151650369|110527421|43adeeda-45a9-49c0-9f1f-746f14391161|b2bf71ba-8702-49f6-9f79-f53c7401c9c8"
],
"meta": {
"version": 2
},
"rule_severities": {
"annular_width": "error",
"clearance": "error",
"copper_edge_clearance": "error",
"courtyards_overlap": "error",
"diff_pair_gap_out_of_range": "error",
"diff_pair_uncoupled_length_too_long": "error",
"drill_out_of_range": "error",
"duplicate_footprints": "warning",
"extra_footprint": "warning",
"footprint_type_mismatch": "error",
"hole_clearance": "error",
"hole_near_hole": "error",
"invalid_outline": "error",
"item_on_disabled_layer": "error",
"items_not_allowed": "error",
"length_out_of_range": "error",
"malformed_courtyard": "error",
"microvia_drill_out_of_range": "error",
"missing_courtyard": "ignore",
"missing_footprint": "warning",
"net_conflict": "warning",
"npth_inside_courtyard": "ignore",
"padstack": "error",
"pth_inside_courtyard": "ignore",
"shorting_items": "error",
"silk_over_copper": "warning",
"silk_overlap": "ignore",
"skew_out_of_range": "error",
"through_hole_pad_without_hole": "error",
"too_many_vias": "error",
"track_dangling": "warning",
"track_width": "error",
"tracks_crossing": "error",
"unconnected_items": "error",
"unresolved_variable": "error",
"via_dangling": "warning",
"zone_has_empty_net": "error",
"zones_intersect": "error"
},
"rules": {
"allow_blind_buried_vias": false,
"allow_microvias": false,
"max_error": 0.005,
"min_clearance": 0.0,
"min_copper_edge_clearance": 0.0,
"min_hole_clearance": 0.25,
"min_hole_to_hole": 0.25,
"min_microvia_diameter": 0.19999999999999998,
"min_microvia_drill": 0.09999999999999999,
"min_silk_clearance": 0.0,
"min_through_hole_diameter": 0.3,
"min_track_width": 0.19999999999999998,
"min_via_annular_width": 0.049999999999999996,
"min_via_diameter": 0.39999999999999997,
"solder_mask_clearance": 0.0,
"solder_mask_min_width": 0.0,
"use_height_for_length_calcs": true
},
"track_widths": [
0.0,
0.2
],
"via_dimensions": [
{
"diameter": 0.0,
"drill": 0.0
}
],
"zones_allow_external_fillets": false,
"zones_use_no_outline": true
},
"layer_presets": []
},
"boards": [],
"cvpcb": {
"equivalence_files": []
},
"erc": {
"erc_exclusions": [],
"meta": {
"version": 0
},
"pin_map": [
[
0,
0,
0,
0,
0,
0,
1,
0,
0,
0,
0,
2
],
[
0,
2,
0,
1,
0,
0,
1,
0,
2,
2,
2,
2
],
[
0,
0,
0,
0,
0,
0,
1,
0,
1,
0,
1,
2
],
[
0,
1,
0,
0,
0,
0,
1,
1,
2,
1,
1,
2
],
[
0,
0,
0,
0,
0,
0,
1,
0,
0,
0,
0,
2
],
[
0,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0,
2
],
[
1,
1,
1,
1,
1,
0,
1,
1,
1,
1,
1,
2
],
[
0,
0,
0,
1,
0,
0,
1,
0,
0,
0,
0,
2
],
[
0,
2,
1,
2,
0,
0,
1,
0,
2,
2,
2,
2
],
[
0,
2,
0,
1,
0,
0,
1,
0,
2,
0,
0,
2
],
[
0,
2,
1,
1,
0,
0,
1,
0,
2,
0,
0,
2
],
[
2,
2,
2,
2,
2,
2,
2,
2,
2,
2,
2,
2
]
],
"rule_severities": {
"bus_definition_conflict": "error",
"bus_entry_needed": "error",
"bus_label_syntax": "error",
"bus_to_bus_conflict": "error",
"bus_to_net_conflict": "error",
"different_unit_footprint": "error",
"different_unit_net": "error",
"duplicate_reference": "error",
"duplicate_sheet_names": "error",
"extra_units": "error",
"global_label_dangling": "warning",
"hier_label_mismatch": "error",
"label_dangling": "error",
"lib_symbol_issues": "warning",
"multiple_net_names": "warning",
"net_not_bus_member": "warning",
"no_connect_connected": "warning",
"no_connect_dangling": "warning",
"pin_not_connected": "error",
"pin_not_driven": "error",
"pin_to_pin": "warning",
"power_pin_not_driven": "error",
"similar_labels": "warning",
"unannotated": "error",
"unit_value_mismatch": "error",
"unresolved_variable": "error",
"wire_dangling": "error"
}
},
"libraries": {
"pinned_footprint_libs": [],
"pinned_symbol_libs": []
},
"meta": {
"filename": "tp1.kicad_pro",
"version": 1
},
"net_settings": {
"classes": [
{
"bus_width": 12.0,
"clearance": 0.2,
"diff_pair_gap": 0.25,
"diff_pair_via_gap": 0.25,
"diff_pair_width": 0.2,
"line_style": 0,
"microvia_diameter": 0.3,
"microvia_drill": 0.1,
"name": "Default",
"pcb_color": "rgba(0, 0, 0, 0.000)",
"schematic_color": "rgba(0, 0, 0, 0.000)",
"track_width": 0.25,
"via_diameter": 0.6,
"via_drill": 0.3,
"wire_width": 6.0
},
{
"bus_width": 12.0,
"clearance": 0.2,
"diff_pair_gap": 0.25,
"diff_pair_via_gap": 0.25,
"diff_pair_width": 0.2,
"line_style": 0,
"microvia_diameter": 0.3,
"microvia_drill": 0.1,
"name": "Power",
"nets": [
"+5V",
"/5V_DUT",
"/5V_FUSE",
"GND"
],
"pcb_color": "rgba(0, 0, 0, 0.000)",
"schematic_color": "rgba(0, 0, 0, 0.000)",
"track_width": 0.8,
"via_diameter": 0.6,
"via_drill": 0.3,
"wire_width": 6.0
}
],
"meta": {
"version": 2
},
"net_colors": null
},
"pcbnew": {
"last_paths": {
"gencad": "",
"idf": "",
"netlist": "",
"specctra_dsn": "",
"step": "tp1.step",
"vrml": ""
},
"page_layout_descr_file": ""
},
"schematic": {
"annotate_start_num": 0,
"drawing": {
"default_line_thickness": 6.0,
"default_text_size": 50.0,
"field_names": [],
"intersheets_ref_own_page": false,
"intersheets_ref_prefix": "",
"intersheets_ref_short": false,
"intersheets_ref_show": false,
"intersheets_ref_suffix": "",
"junction_size_choice": 3,
"label_size_ratio": 0.375,
"pin_symbol_size": 25.0,
"text_offset_ratio": 0.15
},
"legacy_lib_dir": "",
"legacy_lib_list": [],
"meta": {
"version": 1
},
"net_format_name": "",
"ngspice": {
"fix_include_paths": true,
"fix_passive_vals": false,
"meta": {
"version": 0
},
"model_mode": 0,
"workbook_filename": ""
},
"page_layout_descr_file": "C:\\Users\\matt\\Other-Repos\\tillitis-key1\\hw\\boards\\mta1-library\\CERN_OHL_S_drawing_sheet.kicad_wks",
"plot_directory": "",
"spice_adjust_passive_values": false,
"spice_external_command": "spice \"%I\"",
"subpart_first_id": 65,
"subpart_id_separator": 0
},
"sheets": [
[
"b5fbde6a-5a24-47bc-a5df-ebb462e219ef",
""
]
],
"text_variables": {}
}