tillitis-key/hw/boards/mta1-usb-v1/mta1-usb-v1.kicad_prl
Matthew Mets e71d70008b
TK-1 and TP-1 PCBs (#52)
* Add kicad library for flat programming clip

* Add descriptions to part symbols

* Add extended values, manufacturer/distributor info to components in mta1

* Add new board entry for TK1

* Add TP1 programmer design

* Update MTA1-USB-V1 release files to match production

* Change SPI flash memory type to XT25F08BDFIGT-S
* Change touch sensor feedback cap to 1uF
* Add manufacturer, manufacturer part number, distributor, distributor part number

* Update component values for TK1 PCB

* Use specific part # for C8
* Change flash back to Winbond part, for easier sourcing
* Change C1 to 1pF

* Fixes for production programmer PCB

* Swap GND and 5V on J3
* Replace graphic logo with text
* Rename part to 'TP-1'

* TK-1 release

* Add dimensions for PCB
* Add layer stackup for PCB
* Change PCB component origin to match expanded board
* Change schematic title to 'TK-1', update release date

* mta1-usb-v1-programmer: Add corrected part numbers for OSFC production

* Q1, Q2, F1 part subsititutions
* add mfr/supplier info for all parts

* PCB library: add parts

* Rectangular footprint for TK-1 test pads
* BOM generation script used for TK-1 and TP-1 releases

* TP-1 release

* Schematic: Add manufacturer, supplier information for all parts
* Schematic: Update name and release date
* PCB: Add PCB fabrication information
* PCB: Correct pinouts on silkscreen

* PCB library: add 'screw' and 'foot' symbols

* Screw is a schematic-only part, for including mechanical screws in the
  BOM
* Foot is for self-adhesive rubber mounting feet that can be stuck to
  the bottom of a PCB

* TP-1 release: Add screws, feet to the BOM

* Pico library: Add footprint for RPi Pico w/solder paste

* TP-1 RevA release updates:

* Add fiducials in 3 corners (1mm exposed copper ring w/2mm soldermask opening)
* Add solder paste openings to Raspberry Pi Pico pads

* TK-1: RevA.1 release

* Add two fiducials to TK-1 board

* TP-1: Update fuse type to match actual part

* Make placement diagrams for TP-1, TK-1

* Update BC-1-xxx footprints to include placement outlines
* Update TP-1 PCB with new footprints, clean up top fab layer
* Take screenshots of top layers of both boards

* tk-1: fix placement footprints

* Add pin1 marking for ncp footprint
* Add refdes for w25q80 footprint
* Update board with new footprints, clear extraneous text on fab layer
2022-12-22 16:41:46 +01:00

76 lines
1.1 KiB
Plaintext

{
"board": {
"active_layer": 0,
"active_layer_preset": "",
"auto_track_width": false,
"hidden_nets": [],
"high_contrast_mode": 0,
"net_color_mode": 1,
"opacity": {
"pads": 1.0,
"tracks": 1.0,
"vias": 1.0,
"zones": 0.6
},
"ratsnest_display_mode": 0,
"selection_filter": {
"dimensions": true,
"footprints": true,
"graphics": true,
"keepouts": true,
"lockedItems": true,
"otherItems": true,
"pads": true,
"text": true,
"tracks": true,
"vias": true,
"zones": true
},
"visible_items": [
0,
1,
2,
3,
4,
5,
8,
9,
10,
11,
12,
13,
14,
15,
16,
17,
18,
19,
20,
21,
22,
23,
24,
25,
26,
27,
28,
29,
30,
32,
33,
34,
35,
36
],
"visible_layers": "001d020_ffffffff",
"zone_display_mode": 0
},
"meta": {
"filename": "mta1-usb-v1.kicad_prl",
"version": 3
},
"project": {
"files": []
}
}