tillitis-key/hw/application_fpga/fw/tk1_mem.h
Daniel Lublin 7eb4d0304b
fw: load app at the start of RAM
Since app is always loaded at the start of RAM, the TK1_APP_ADDR define
is no longer needed.

Signed-off-by: Daniel Lublin <daniel@lublin.se>
2023-03-14 10:25:03 +01:00

103 lines
4.2 KiB
C

/*
* QEMU RISC-V Board Compatible with Tillitis TK1 platform
*
* Copyright (c) 2022, 2023 Tillitis AB
* SPDX-License-Identifier: GPL-2.0-only
*/
// clang-format off
#ifndef TK1_MEM_H
#define TK1_MEM_H
// The canonical location of this file is:
// repo: https://github.com/tillitis/tillitis-key1
// path: /hw/application_fpga/fw/tk1_mem.h
// The contents are derived from the Verilog code. For use by QEMU model,
// firmware, and apps.
enum {
TK1_ROM_BASE = 0x00000000, // 0b00000000...
TK1_RAM_BASE = 0x40000000, // 0b01000000...
TK1_RAM_SIZE = 0x20000, // 128 KB
TK1_RESERVED_BASE = 0x80000000, // 0b10000000...
TK1_MMIO_BASE = 0xc0000000, // 0b11000000...
TK1_MMIO_SIZE = 0xffffffff - TK1_MMIO_BASE,
TK1_APP_MAX_SIZE = TK1_RAM_SIZE,
TK1_MMIO_TRNG_BASE = TK1_MMIO_BASE | 0x00000000,
TK1_MMIO_TIMER_BASE = TK1_MMIO_BASE | 0x01000000,
TK1_MMIO_UDS_BASE = TK1_MMIO_BASE | 0x02000000,
TK1_MMIO_UART_BASE = TK1_MMIO_BASE | 0x03000000,
TK1_MMIO_TOUCH_BASE = TK1_MMIO_BASE | 0x04000000,
TK1_MMIO_FW_RAM_BASE = TK1_MMIO_BASE | 0x10000000,
TK1_MMIO_FW_RAM_SIZE = 2048,
// This "core" only exists in QEMU
TK1_MMIO_QEMU_BASE = TK1_MMIO_BASE | 0x3e000000,
TK1_MMIO_TK1_BASE = TK1_MMIO_BASE | 0x3f000000, // 0xff000000
TK1_NAME0_SUFFIX = 0x00,
TK1_NAME1_SUFFIX = 0x04,
TK1_VERSION_SUFFIX = 0x08,
TK1_MMIO_TRNG_STATUS = TK1_MMIO_TRNG_BASE | 0x24,
TK1_MMIO_TRNG_STATUS_READY_BIT = 0,
TK1_MMIO_TRNG_ENTROPY = TK1_MMIO_TRNG_BASE | 0x80,
TK1_MMIO_TIMER_CTRL = TK1_MMIO_TIMER_BASE | 0x20,
TK1_MMIO_TIMER_CTRL_START_BIT = 0,
TK1_MMIO_TIMER_CTRL_STOP_BIT = 1,
TK1_MMIO_TIMER_STATUS = TK1_MMIO_TIMER_BASE | 0x24,
TK1_MMIO_TIMER_STATUS_RUNNING_BIT = 0,
TK1_MMIO_TIMER_PRESCALER = TK1_MMIO_TIMER_BASE | 0x28,
TK1_MMIO_TIMER_TIMER = TK1_MMIO_TIMER_BASE | 0x2c,
TK1_MMIO_UDS_FIRST = TK1_MMIO_UDS_BASE | 0x40,
TK1_MMIO_UDS_LAST = TK1_MMIO_UDS_BASE | 0x5c, // Address of last 32-bit word of UDS
TK1_MMIO_UART_BIT_RATE = TK1_MMIO_UART_BASE | 0x40,
TK1_MMIO_UART_DATA_BITS = TK1_MMIO_UART_BASE | 0x44,
TK1_MMIO_UART_STOP_BITS = TK1_MMIO_UART_BASE | 0x48,
TK1_MMIO_UART_RX_STATUS = TK1_MMIO_UART_BASE | 0x80,
TK1_MMIO_UART_RX_DATA = TK1_MMIO_UART_BASE | 0x84,
TK1_MMIO_UART_RX_BYTES = TK1_MMIO_UART_BASE | 0x88,
TK1_MMIO_UART_TX_STATUS = TK1_MMIO_UART_BASE | 0x100,
TK1_MMIO_UART_TX_DATA = TK1_MMIO_UART_BASE | 0x104,
TK1_MMIO_TOUCH_STATUS = TK1_MMIO_TOUCH_BASE | 0x24,
TK1_MMIO_TOUCH_STATUS_EVENT_BIT = 0,
// This will only ever exist in QEMU:
TK1_MMIO_QEMU_DEBUG = TK1_MMIO_QEMU_BASE | 0x1000,
TK1_MMIO_TK1_NAME0 = TK1_MMIO_TK1_BASE | TK1_NAME0_SUFFIX,
TK1_MMIO_TK1_NAME1 = TK1_MMIO_TK1_BASE | TK1_NAME1_SUFFIX,
TK1_MMIO_TK1_VERSION = TK1_MMIO_TK1_BASE | TK1_VERSION_SUFFIX,
TK1_MMIO_TK1_SWITCH_APP = TK1_MMIO_TK1_BASE | 0x20,
TK1_MMIO_TK1_LED = TK1_MMIO_TK1_BASE | 0x24,
TK1_MMIO_TK1_LED_R_BIT = 2,
TK1_MMIO_TK1_LED_G_BIT = 1,
TK1_MMIO_TK1_LED_B_BIT = 0,
TK1_MMIO_TK1_GPIO = TK1_MMIO_TK1_BASE | 0x28,
TK1_MMIO_TK1_GPIO1_BIT = 0,
TK1_MMIO_TK1_GPIO2_BIT = 1,
TK1_MMIO_TK1_GPIO3_BIT = 2,
TK1_MMIO_TK1_GPIO4_BIT = 3,
TK1_MMIO_TK1_APP_ADDR = TK1_MMIO_TK1_BASE | 0x30,
TK1_MMIO_TK1_APP_SIZE = TK1_MMIO_TK1_BASE | 0x34,
TK1_MMIO_TK1_BLAKE2S = TK1_MMIO_TK1_BASE | 0x40,
TK1_MMIO_TK1_CDI_FIRST = TK1_MMIO_TK1_BASE | 0x80,
TK1_MMIO_TK1_CDI_LAST = TK1_MMIO_TK1_BASE | 0x9c, // Address of last 32-bit word of CDI.
TK1_MMIO_TK1_UDI_FIRST = TK1_MMIO_TK1_BASE | 0xc0,
TK1_MMIO_TK1_UDI_LAST = TK1_MMIO_TK1_BASE | 0xc4, // Address of last 32-bit word of UDI.
TK1_MMIO_TK1_RAM_ASLR = TK1_MMIO_TK1_BASE | 0x100,
TK1_MMIO_TK1_RAM_SCRAMBLE = TK1_MMIO_TK1_BASE | 0x104,
TK1_MMIO_TK1_CPU_MON_CTRL = TK1_MMIO_TK1_BASE | 0x180,
TK1_MMIO_TK1_CPU_MON_FIRST = TK1_MMIO_TK1_BASE | 0x184,
TK1_MMIO_TK1_CPU_MON_LAST = TK1_MMIO_TK1_BASE | 0x188,
};
#endif