tillitis-key/hw/production_test/iceflasher.py

365 lines
11 KiB
Python
Executable File

#!/usr/bin/env python
"""IceFlasher, an iCE40 programming tool based on an RPi Pico"""
import struct
from typing import List, Any
import usb1 # type: ignore
# def processReceivedData(transfer):
# # print('got rx data',
# transfer.getStatus(),
# transfer.getActualLength())
#
# if transfer.getStatus() != usb1.TRANSFER_COMPLETED:
# # Transfer did not complete successfully, there is no
# # data to read. This example does not resubmit transfers
# # on errors. You may want to resubmit in some cases (timeout,
# # ...).
# return
# data = transfer.getBuffer()[:transfer.getActualLength()]
# # Process data...
# # Resubmit transfer once data is processed.
# transfer.submit()
class IceFlasher:
""" iCE40 programming tool based on an RPi Pico """
COMMAND_PIN_DIRECTION = 0x30
COMMAND_PULLUPS = 0x31
COMMAND_PIN_VALUES = 0x32
COMMAND_SPI_CONFIGURE = 0x40
COMMAND_SPI_XFER = 0x41
COMMAND_SPI_CLKOUT = 0x42
COMMAND_ADC_READ = 0x50
COMMAND_BOOTLOADER = 0xE0
SPI_MAX_TRANSFER_SIZE = 2048 - 8
def _check_for_old_firmware(self) -> bool:
for device in self.context.getDeviceList():
if device.getVendorID() == 0xcafe and device.getProductID() == 0x4004:
return True
if device.getVendorID() == 0xcafe and device.getProductID() == 0x4010:
return True
return False
def __init__(self) -> None:
self.transfer_list: List[Any] = []
# See: https://github.com/vpelletier/python-libusb1#usage
self.context = usb1.USBContext()
self.handle = self.context.openByVendorIDAndProductID(
0x1209,
0x8886,
skip_on_error=True,
)
if self.handle is None:
# Device not present, or user is not allowed to access
# device.
if self._check_for_old_firmware():
raise ValueError(
'Programmer with outdated firmware found- please update!')
else:
raise ValueError('Programmer not found')
# Check the device firmware version
bcd_device = self.handle.getDevice().getbcdDevice()
if bcd_device != 0x0200:
raise ValueError(
'Pico firmware version out of date- please upgrade')
self.handle.claimInterface(0)
self.cs_pin = -1
def __del__(self) -> None:
self.close()
def close(self) -> None:
""" Release the USB device handle """
self._wait_async()
if self.handle is not None:
self.handle.close()
self.handle = None
self.context.close()
self.context = None
def _wait_async(self) -> None:
# Wait until all submitted transfers can be cleared
while any(transfer.isSubmitted()
for transfer in self.transfer_list):
try:
self.context.handleEvents()
except usb1.USBErrorInterrupted:
pass
for transfer in reversed(self.transfer_list):
if transfer.getStatus() == \
usb1.TRANSFER_COMPLETED:
self.transfer_list.remove(transfer)
else:
print(
transfer.getStatus(),
usb1.TRANSFER_COMPLETED)
def _write(
self,
request_id: int,
data: bytes,
nonblocking: bool = False) -> None:
if nonblocking:
transfer = self.handle.getTransfer()
transfer.setControl(
# usb1.ENDPOINT_OUT | usb1.TYPE_VENDOR |
# usb1.RECIPIENT_DEVICE, #request type
0x40,
request_id, # request
0, # index
0,
data, # data
callback=None, # callback functiopn
user_data=None, # userdata
timeout=1000
)
transfer.submit()
self.transfer_list.append(transfer)
else:
self.handle.controlWrite(
0x40, request_id, 0, 0, data, timeout=100)
def _read(self, request_id: int, length: int) -> bytes:
# self._wait_async()
return self.handle.controlRead(
0xC0, request_id, 0, 0, length, timeout=100)
def gpio_set_direction(self, pin: int, direction: bool) -> None:
"""Set the direction of a single GPIO pin
Keyword arguments:
pin -- GPIO pin number
value -- True: Set pin as output, False: set pin as input
"""
msg = struct.pack('>II',
(1 << pin),
((1 if direction else 0) << pin),
)
self._write(self.COMMAND_PIN_DIRECTION, msg)
def gpio_set_pulls(
self,
pin: int,
pullup: bool,
pulldown: bool) -> None:
"""Configure the pullup/down resistors for a single GPIO pin
Keyword arguments:
pin -- GPIO pin number
pullup -- True: Enable pullup, False: Disable pullup
pulldown -- True: Enable pulldown, False: Disable pulldown
"""
msg = struct.pack('>III',
(1 << pin),
((1 if pullup else 0) << pin),
((1 if pulldown else 0) << pin),
)
self._write(self.COMMAND_PULLUPS, msg)
def gpio_put(self, pin: int, val: bool) -> None:
"""Set the output level of a single GPIO pin
Keyword arguments:
pin -- GPIO pin number
val -- True: High, False: Low
"""
msg = struct.pack('>II',
1 << pin,
(1 if val else 0) << pin,
)
self._write(self.COMMAND_PIN_VALUES, msg)
def gpio_get_all(self) -> int:
"""Read the input levels of all GPIO pins"""
msg_in = self._read(self.COMMAND_PIN_VALUES, 4)
[gpio_states] = struct.unpack('>I', msg_in)
return gpio_states
def gpio_get(self, pin: int) -> bool:
"""Read the input level of a single GPIO pin
Keyword arguments:
pin -- GPIO pin number
"""
gpio_states = self.gpio_get_all()
return ((gpio_states >> pin) & 0x01) == 0x01
def spi_configure(
self,
sck_pin: int,
cs_pin: int,
mosi_pin: int,
miso_pin: int,
clock_speed: int) -> None:
"""Set the pins to use for SPI transfers
Keyword arguments:
sck_pin -- GPIO pin number to use as the SCK signal
cs_pin -- GPIO pin number to use as the CS signal
mosi_pin -- GPIO pin number to use as the MOSI signal
miso_pin -- GPIO pin number to use as the MISO signal
clock_speed -- SPI clock speed, in MHz
"""
header = struct.pack('>BBBBB',
sck_pin,
cs_pin,
mosi_pin,
miso_pin,
clock_speed)
msg = bytearray()
msg.extend(header)
self._write(self.COMMAND_SPI_CONFIGURE, msg)
self.cs_pin = cs_pin
def spi_write(
self,
buf: bytes,
toggle_cs: bool = True) -> None:
"""Write data to the SPI port
Keyword arguments:
buf -- Byte buffer to send.
toggle_cs -- (Optional) If true, toggle the CS line
"""
self._spi_xfer(buf, toggle_cs, False)
def spi_rxtx(
self,
buf: bytes,
toggle_cs: bool = True) -> bytes:
"""Bitbang a SPI transfer
Keyword arguments:
buf -- Byte buffer to send.
toggle_cs -- (Optional) If true, toggle the CS line
"""
return self._spi_xfer(buf, toggle_cs, True)
def _spi_xfer(
self,
buf: bytes,
toggle_cs: bool,
read_after_write: bool) -> bytes:
ret = bytearray()
if len(buf) <= self.SPI_MAX_TRANSFER_SIZE:
return self._spi_xfer_inner(
buf,
toggle_cs,
read_after_write)
if toggle_cs:
self.gpio_put(self.cs_pin, False)
for i in range(0, len(buf), self.SPI_MAX_TRANSFER_SIZE):
chunk = buf[i:i + self.SPI_MAX_TRANSFER_SIZE]
ret.extend(
self._spi_xfer_inner(
chunk,
False,
read_after_write))
if toggle_cs:
self.gpio_put(self.cs_pin, True)
return bytes(ret)
def _spi_xfer_inner(
self,
buf: bytes,
toggle_cs: bool,
read_after_write: bool) -> bytes:
"""Bitbang a SPI transfer using the specificed GPIO pins
Keyword arguments:
buf -- Byte buffer to send.
toggle_cs -- (Optional) If true, toggle the CS line
"""
if len(buf) > self.SPI_MAX_TRANSFER_SIZE:
raise ValueError(
'Message too large, '
+ f'size:{len(buf)} max:{self.SPI_MAX_TRANSFER_SIZE}')
header = struct.pack('>BI', toggle_cs, len(buf))
msg = bytearray()
msg.extend(header)
msg.extend(buf)
self._write(self.COMMAND_SPI_XFER, msg)
if not read_after_write:
return bytes()
msg_in = self._read(
self.COMMAND_SPI_XFER,
len(buf))
return msg_in
def spi_clk_out(self, byte_count: int) -> None:
"""Run the SPI clock without transferring data
This function is useful for SPI devices that need a clock to
advance their state machines.
Keyword arguments:
byte_count -- Number of bytes worth of clocks to send
"""
header = struct.pack('>I',
byte_count)
msg = bytearray()
msg.extend(header)
self._write(
self.COMMAND_SPI_CLKOUT,
msg)
def adc_read_all(self) -> tuple[float, float, float]:
"""Read the voltage values of ADC 0, 1, and 2
The firmware will read the values for each input multiple
times, and return averaged values for each input.
"""
msg_in = self._read(self.COMMAND_ADC_READ, 3 * 4)
[ch0, ch1, ch2] = struct.unpack('>III', msg_in)
return ch0 / 1000000, ch1 / 1000000, ch2 / 1000000
def bootloader(self) -> None:
"""Reset the programmer to bootloader mode
After the device is reset, it can be programmed using
picotool, or by copying a file to the uf2 drive.
"""
try:
self._write(self.COMMAND_BOOTLOADER, bytes())
except usb1.USBErrorIO:
pass