Git-Mirrors/tillitis-key
1
0
Fork 0
mirror of https://github.com/tillitis/tillitis-key1.git synced 2024-10-01 01:45:38 -04:00
Code Issues Packages Projects Releases Wiki Activity

doc: update to refs to in-tree TP-1 firmware

Browse Source 
Signed-off-by: Daniel Lublin <daniel@lublin.se>
This commit is contained in:
Daniel Lublin 2023-04-20 11:35:09 +02:00 committed by dehanj
parent 65e3ea015d
commit ea7d64c29f
No known key found for this signature in database
GPG Key ID: 3707A9DBF4BB8F1A
2 changed files with 20 additions and 17 deletions
Show Stats Download Patch File Download Diff File Expand all files Collapse all files

37
doc/toolchain_setup.md
View File

@ -141,32 +141,32 @@ The circuit board designs were all created in [KiCad
## MTA1-USB-V1 and TP-1 programming board firmware
The programmer boards are running a custom firmware developed by
Blinkinlabs. The source code for this firnware is available on
Github: https://github.com/Blinkinlabs/ice40_flasher
There is also a pre built firmware binary available for the
programmer board:
https://github.com/Blinkinlabs/ice40_flasher/tree/main/bin
The TP-1 programming boards runs a custom firmware developed by
Blinkinlabs. Source code for this firmware can be found at
[hw/boards/tp1/firmware/](../hw/boards/tp1/firmware/). There is also a
pre-built firmware binary at
[hw/boards/tp1/firmware/bin/main.uf2](../hw/boards/tp1/firmware/bin/main.uf2).
To update the firmware on the programmer board, either build the file
"main.uf2", or download the pre built file to your host computer.
Then do the following:
`main.uf2` (more instructions below), or get the pre-built file to
your host computer. Then do the following:
1. Disconnect the programming board from the host computer
2. Press and hold the "BOOTSEL" button on the RPi2040 sub board on
the programming board
2. Press and hold the "BOOTSEL" button on the RPi2040 sub-board on the
programming board
3. Reconnect the programming board to the host computer
4. Release the "BOOTSEL" button after connecting the programming
board to the host. The board should now appear to the host as a
USB connected storage device
5. Open the storage device and drop the firmware file ("main.uf2")
into the storage device
4. Release the "BOOTSEL" button after connecting the programming board
to the host. The board should now appear to the host as a USB
connected storage device
5. Open the storage device and drop the firmware file `main.uf2` into
the storage device
The programmer will update its firmware with the file and restart
itself. After reboot the storage device will automatically be
disconnected.
### Building the TP-1 firmware
The firmware requires the Raspberry Pi Pico SDK:
cd ~
@ -174,10 +174,13 @@ The firmware requires the Raspberry Pi Pico SDK:
cd pico-sdk
git submodule update --init
Note that the Docker image places the pico-sdk directory in
Note that our container image places the pico-sdk directory in
/usr/local. For normal development, it is usually left in the
users home directory.
See
[hw/boards/tp1/firmware/README.md](../hw/boards/tp1/firmware/README.md)
for further instructions.
## CH552 USB to Serial firmware

BIN
hw/boards/tp1/firmware/bin/main.uf2 Normal file
View File

Binary file not shown.