mirror of
https://github.com/tillitis/tillitis-key1.git
synced 2025-05-09 01:15:02 -04:00
ch552: Reorganize file directory structure
- Move source files to separate directory. - Move include files to separate directory. - Add specific output direcory for intermediate files.
This commit is contained in:
Jonas Thörnblad
parent
8d8f4c7faf
commit
7de49d2021
11 changed files with 19 additions and 23 deletions
|
|
@ -1,261 +0,0 @@
|
|||
#ifndef __DEBUG_H__
|
||||
#define __DEBUG_H__
|
||||
|
||||
/* Debug */
|
||||
/* Provide printf subroutine and delay function */
|
||||
#pragma once
|
||||
|
||||
#include <stdint.h>
|
||||
|
||||
#include "ch554.h"
|
||||
|
||||
// UART1 baud rates
|
||||
// Setting Actual % error
|
||||
//Std 9600 9615.38 0.16%
|
||||
// 14400 14492.75 0.64%
|
||||
//Std 19200 19230.77 0.16%
|
||||
//Std 38400 38461.54 0.16%
|
||||
//Std 57600 58823.53 2.12%
|
||||
// 100000 100000 0.00%
|
||||
//Std 115200 111111.1 -3.55%
|
||||
// 128000 142857.14 11.61%
|
||||
//Std 230400 250000 8.51%
|
||||
// 250000 250000 0%
|
||||
// 256000 333333.33 30.21%
|
||||
//Std 460800 500000 8.51%
|
||||
//Std 500000 500000 0%
|
||||
//Std 576000
|
||||
//Std 921600
|
||||
//Std 1000000 1000000 0.00%
|
||||
|
||||
#ifndef UART0_BAUD
|
||||
#define UART0_BAUD 1000000
|
||||
#endif
|
||||
|
||||
#ifndef UART1_BAUD
|
||||
#define UART1_BAUD 500000
|
||||
#endif
|
||||
|
||||
void CfgFsys(void); // CH554 clock selection and configuration
|
||||
void mDelayuS(uint16_t n); // Delay in units of uS
|
||||
void mDelaymS(uint16_t n); // Delay in mS
|
||||
|
||||
// Set pin p1.4 and p1.5 to GPIO output mode.
|
||||
void gpio_init(void);
|
||||
void gpio_set(uint8_t pin);
|
||||
void gpio_unset(uint8_t pin);
|
||||
uint8_t gpio_get(uint8_t pin);
|
||||
|
||||
void gpio_init_p1_4_in(void);
|
||||
void gpio_init_p1_5_out(void);
|
||||
uint8_t gpio_p1_4_get(void);
|
||||
void gpio_p1_5_set(void);
|
||||
void gpio_p1_5_unset(void);
|
||||
|
||||
/*******************************************************************************
|
||||
* Function Name : CH554UART0Alter()
|
||||
* Description : Set the alternate pin mappings for UART0 (RX on P1.2, TX on P1.3)
|
||||
*******************************************************************************/
|
||||
inline void CH554UART0Alter()
|
||||
{
|
||||
PIN_FUNC |= bUART0_PIN_X; // RX on P1.2, TX on P1.3
|
||||
}
|
||||
|
||||
/*******************************************************************************
|
||||
* Function Name : mInitSTDIO()
|
||||
* Description : CH554 UART0 is initialized
|
||||
* T1 is used as the baud rate generator of UART0 by default
|
||||
* T2 can also be used as baud rate generator
|
||||
* RX on P3.0, TX on P3.1
|
||||
*******************************************************************************/
|
||||
inline void mInitSTDIO( )
|
||||
{
|
||||
uint32_t x;
|
||||
uint8_t x2;
|
||||
|
||||
SM0 = 0; // 8-bit data asynchronous communication
|
||||
SM1 = 1; // Variable baud rate, which is generated by timer T1 or T2
|
||||
|
||||
// With SM0=0 and SM1=1 we are now in UART0 Mode 1
|
||||
|
||||
SM2 = 0; // In Mode 1, SM2=0 gives that the Receive interrupt flag bit is set when receiving data and the reception is valid
|
||||
|
||||
// Use Timer1 as a baud rate generator
|
||||
RCLK = 0; // UART0 receive clock
|
||||
TCLK = 0; // UART0 transmit clock
|
||||
|
||||
PCON |= SMOD; // Set Fast mode for UART0 baud rate communication
|
||||
x = 10 * FREQ_SYS / UART0_BAUD / 16; // If you change the main frequency, be careful not to overflow the value of x
|
||||
x2 = x % 10;
|
||||
x /= 10;
|
||||
if (x2 >= 5) {
|
||||
x++; // Rounding
|
||||
}
|
||||
TMOD = (TMOD & ~bT1_GATE & ~bT1_CT & ~MASK_T1_MOD) | bT1_M1; // Timer1 as 8-bit auto-reload timer
|
||||
T2MOD = T2MOD | bTMR_CLK | bT1_CLK; // Timer1 clock selection
|
||||
TH1 = 0-x; // 12MHz crystal oscillator, baud / 12 is the actual need to set the baud rate
|
||||
TR1 = 1; // Start timer 1
|
||||
TI = 1; // Enable transmit interrupt
|
||||
REN = 1; // UART0 receive enable
|
||||
ES = 1; // UART0 interrupt enable
|
||||
}
|
||||
|
||||
/*******************************************************************************
|
||||
* Function Name : CH554UART0RcvByte()
|
||||
* Description : CH554UART0 receives a byte
|
||||
* Return : SBUF
|
||||
*******************************************************************************/
|
||||
inline uint8_t CH554UART0RcvByte()
|
||||
{
|
||||
while (RI == 0)
|
||||
; // Wait for uart rx interrupt flag
|
||||
RI = 0;
|
||||
return SBUF;
|
||||
}
|
||||
|
||||
/*******************************************************************************
|
||||
* Function Name : CH554UART0SendByte(uint8_t SendDat)
|
||||
* Description : CH554UART0 sends a byte
|
||||
* Input : uint8_t SendDat; the data to be sent
|
||||
*******************************************************************************/
|
||||
inline void CH554UART0SendByte(uint8_t SendDat)
|
||||
{
|
||||
SBUF = SendDat;
|
||||
while (TI == 0)
|
||||
; // Wait for transmit to finish (TI == 1)
|
||||
TI = 0;
|
||||
}
|
||||
|
||||
/*******************************************************************************
|
||||
* Function Name : CH554UART1Alter()
|
||||
* Description : Set the alternate pin mappings for UART1 (RX on P3.4, TX on P3.2)
|
||||
*******************************************************************************/
|
||||
inline void CH554UART1Alter()
|
||||
{
|
||||
PIN_FUNC |= bUART1_PIN_X; // RX on P3.4, TX on P3.2
|
||||
}
|
||||
|
||||
/*******************************************************************************
|
||||
* Function Name : UART1Setup()
|
||||
* Description : CH554 serial port 1 initialization
|
||||
* RX on P1.6, TX on P1.7
|
||||
*
|
||||
*******************************************************************************/
|
||||
inline void UART1Setup()
|
||||
{
|
||||
U1SM0 = 0; // UART1 selects 8-bit data bit
|
||||
U1SMOD = 1; // Fast mode
|
||||
U1REN = 1; // Enable receiving
|
||||
uint32_t val = FREQ_SYS/16/UART1_BAUD; // Calculation for Fast mode
|
||||
SBAUD1 = 256 - val; // Calculation for Fast mode
|
||||
IE_UART1 = 1; // Enable UART1 interrupt
|
||||
IP_EX = bIP_UART1; // Serial port IRQ has high priority
|
||||
}
|
||||
|
||||
/*******************************************************************************
|
||||
* Function Name : UART1Clean()
|
||||
* Description : Read out spurious data
|
||||
*******************************************************************************/
|
||||
inline void UART1Clean()
|
||||
{
|
||||
uint8_t tmp;
|
||||
|
||||
while (U1RI) {
|
||||
tmp = SBUF1;
|
||||
U1RI = 0;
|
||||
}
|
||||
}
|
||||
|
||||
/*******************************************************************************
|
||||
* Function Name : CH554UART1RcvByte()
|
||||
* Description : CH554UART1 receives a byte
|
||||
* Return : SBUF
|
||||
*******************************************************************************/
|
||||
inline uint8_t CH554UART1RcvByte( )
|
||||
{
|
||||
while (U1RI == 0) // Query reception, interrupt mode is not required
|
||||
;
|
||||
U1RI = 0;
|
||||
return SBUF1;
|
||||
}
|
||||
|
||||
/*******************************************************************************
|
||||
* Function Name : CH554UART1SendByte(uint8_t SendDat)
|
||||
* Description : CH554UART1 sends a byte
|
||||
* Input : uint8_t SendDat; data to be sent
|
||||
*******************************************************************************/
|
||||
inline void CH554UART1SendByte(uint8_t SendDat)
|
||||
{
|
||||
while(gpio_p1_4_get() == 0)
|
||||
;
|
||||
SBUF1 = SendDat; // Query sending, the interrupt mode does not need the following two statements, but TI=0 is required before sending
|
||||
while (U1TI == 0)
|
||||
;
|
||||
U1TI = 0;
|
||||
}
|
||||
|
||||
/*******************************************************************************
|
||||
* Function Name : CH554UART1SendBuffer(uint8_t SendDat)
|
||||
* Description : CH554UART1 sends a complete buffer
|
||||
* Input : uint8_t *Buf; Data to be sent
|
||||
* Input : uint32_t Len; Length of data
|
||||
*******************************************************************************/
|
||||
inline void CH554UART1SendBuffer(uint8_t *Buf, uint32_t Len)
|
||||
{
|
||||
uint32_t Count = 0;
|
||||
while (Count < Len) {
|
||||
if (gpio_p1_4_get()) {
|
||||
SBUF1 = Buf[Count++];
|
||||
while (U1TI == 0)
|
||||
;
|
||||
U1TI = 0;
|
||||
}
|
||||
}
|
||||
}
|
||||
|
||||
#if SDCC < 370
|
||||
void putchar(char c);
|
||||
char getchar(void);
|
||||
#else
|
||||
int putchar(int c);
|
||||
int getchar(void);
|
||||
#endif
|
||||
|
||||
/*******************************************************************************
|
||||
* Function Name : CH554WDTModeSelect(uint8_t mode)
|
||||
* Description : CH554 watchdog mode selection
|
||||
* Input : uint8_t mode
|
||||
0 timer
|
||||
1 watchDog
|
||||
* Output : None
|
||||
* Return : None
|
||||
*******************************************************************************/
|
||||
inline void CH554WDTModeSelect(uint8_t mode)
|
||||
{
|
||||
SAFE_MOD = 0x55;
|
||||
SAFE_MOD = 0xaa; // Enter Safe Mode
|
||||
if (mode) {
|
||||
GLOBAL_CFG |= bWDOG_EN; // Start watchdog reset
|
||||
} else {
|
||||
GLOBAL_CFG &= ~bWDOG_EN; //Start watchdog only as a timer
|
||||
}
|
||||
SAFE_MOD = 0x00; // Exit safe Mode
|
||||
WDOG_COUNT = 0; // Watchdog assignment initial value
|
||||
}
|
||||
|
||||
/*******************************************************************************
|
||||
* Function Name : CH554WDTFeed(uint8_t tim)
|
||||
* Description : CH554 watchdog timer time setting
|
||||
* Input : uint8_t tim watchdog reset time setting
|
||||
|
||||
00H(6MHz)=2.8s
|
||||
80H(6MHz)=1.4s
|
||||
* Output : None
|
||||
* Return : None
|
||||
*******************************************************************************/
|
||||
inline void CH554WDTFeed(uint8_t tim)
|
||||
{
|
||||
WDOG_COUNT = tim; // Watchdog counter assignment
|
||||
}
|
||||
|
||||
#endif
|
||||
Loading…
Add table
Add a link
Reference in a new issue