Git-Mirrors/tillitis-key
1
0
Fork 0
mirror of https://github.com/tillitis/tillitis-key1.git synced 2024-10-01 01:45:38 -04:00
Code Issues Packages Projects Releases Wiki Activity

fpga: Add testcase for SPI access control

Browse Source 
Add testcase that checks that access control
      is enabled and disabled as expected.

Signed-off-by: Joachim Strömbergson <joachim@assured.se>
This commit is contained in:
Joachim Strömbergson 2024-07-09 14:05:17 +02:00 committed by Daniel Jobson
parent 4511096630
commit 5a5430d024
No known key found for this signature in database
GPG Key ID: 3707A9DBF4BB8F1A
1 changed files with 109 additions and 13 deletions
Show Stats Download Patch File Download Diff File Expand all files Collapse all files

122
hw/application_fpga/core/tk1/tb/tb_tk1.v
View File

@ -61,6 +61,7 @@ module tb_tk1();
localparam ADDR_SPI_EN = 8'h80;
localparam ADDR_SPI_XFER = 8'h81;
localparam ADDR_SPI_DATA = 8'h82;
localparam ADDR_SPI_CMD = 8'h83;
//----------------------------------------------------------------
@ -277,13 +278,13 @@ module tb_tk1();
tb_cpu_valid = 1'h0;
tb_cpu_trap = 1'h0;
tb_gpio1 = 1'h0;
tb_gpio2 = 1'h0;
tb_gpio1 = 1'h0;
tb_gpio2 = 1'h0;
tb_cs = 1'h0;
tb_we = 1'h0;
tb_address = 8'h0;
tb_write_data = 32'h0;
tb_cs = 1'h0;
tb_we = 1'h0;
tb_address = 8'h0;
tb_write_data = 32'h0;
end
endtask // init_sim
@ -298,8 +299,7 @@ module tb_tk1();
begin
if (DEBUG)
begin
$display("--- Writing 0x%08x to 0x%02x.", word, address);
$display("");
$display("--- Write word: 0x%08x to 0x%02x.", word, address);
end
tb_address = address;
@ -362,13 +362,11 @@ module tb_tk1();
if (DEBUG)
begin
if (read_data == expected) begin
$display("--- Reading 0x%08x from 0x%02x.", read_data, address);
$display("--- Read word: 0x%08x from 0x%02x.", read_data, address);
end else begin
$display("--- Error: Got 0x%08x when reading from 0x%02x, expected 0x%08x",
read_data, address, expected);
$display("--- Read word: Error. Got 0x%08x, expected 0x%08x", read_data, address, expected);
error_ctr = error_ctr + 1;
end
$display("");
end
end
endtask // read_check_word
@ -684,6 +682,13 @@ module tb_tk1();
tb_monitor = 0;
tb_spi_monitor = 0;
// We need to enable SPI access before testing.
dut.spi_access_ctrl_new = 1'h1;
dut.spi_access_ctrl_we = 1'h1;
#(CLK_PERIOD);
dut.spi_access_ctrl_new = 1'h0;
dut.spi_access_ctrl_we = 1'h0;
$display("");
$display("--- test10: Loopback in SPI Master started.");
@ -702,7 +707,7 @@ module tb_tk1();
end
$display("--- test10: Byte should have been sent.");
// 0x58 is the inverse of 0xa7.
// Read back data. 0x58 is the inverse of 0xa7.
#(2 * CLK_PERIOD);
read_check_word(ADDR_SPI_DATA, 32'h58);
write_word(ADDR_SPI_EN, 32'h0);
@ -716,6 +721,96 @@ module tb_tk1();
endtask // test10
//----------------------------------------------------------------
// test11()
// SPI access control test.
//----------------------------------------------------------------
task test11;
begin
tc_ctr = tc_ctr + 1;
$display("");
$display("--- test11: SPI access control started.");
// Start by resetting and check if access is enabled.
$display("--- test11: Check that SPI access is disabled after reset.");
reset_dut();
read_word(ADDR_SPI_XFER, 32'h0);
$display("");
// Set the SPI command adress API to an address in ROM space.
// Read it back to check that it has been set.
$display("--- test11: Set and read SPI command address.");
write_word(ADDR_SPI_CMD, 32'h0000dead);
read_word(ADDR_SPI_CMD, 32'h0000dead);
$display("");
// Simulate CPU instruction read from the SPI command adress.
// And check that access has been enabled.
$display("--- test11: Perform CPU instruction read from SPI command address.");
$display("--- test11: Then check that SPI access is enabled.");
tb_cpu_addr = 32'h0000dead;
tb_cpu_instr = 1'h1;
tb_cpu_valid = 1'h1;
#(CLK_PERIOD);
tb_cpu_instr = 1'h0;
tb_cpu_valid = 1'h0;
read_word(ADDR_SPI_XFER, 32'h1);
$display("");
// Simulate CPU instruction read from a RAM address.
// And check that access has been disabled.
$display("--- test11: Perform CPU instruction read from a RAM address.");
$display("--- test11: Then check that SPI access has been disabled.");
tb_cpu_addr = 32'h4000dead;
tb_cpu_instr = 1'h1;
tb_cpu_valid = 1'h1;
#(CLK_PERIOD);
tb_cpu_instr = 1'h0;
tb_cpu_valid = 1'h0;
read_word(ADDR_SPI_XFER, 32'h0);
$display("");
// Move the SPI command adress API to a new address in ROM space.
// Read it back to check that it has been set.
$display("--- test11: Set SPI command address to a new address and read again.");
write_word(ADDR_SPI_CMD, 32'h0000cafe);
read_word(ADDR_SPI_CMD, 32'h0000cafe);
$display("");
// Simulate CPU instruction read from the old SPI command adress.
// And check that access is still been disabled.
$display("--- test11: Perform CPU instruction read from old SPI command address.");
$display("--- test11: Then check that SPI access is still disabled.");
tb_cpu_addr = 32'h0000dead;
tb_cpu_instr = 1'h1;
tb_cpu_valid = 1'h1;
#(CLK_PERIOD);
tb_cpu_instr = 1'h0;
tb_cpu_valid = 1'h0;
read_word(ADDR_SPI_XFER, 32'h0);
$display("");
// Simulate CPU instruction read from the new SPI command adress.
// And check that access is now enabled.
$display("--- test11: Perform CPU instruction read from new SPI command address.");
$display("--- test11: Then check that SPI access is now enabled.");
tb_cpu_addr = 32'h0000cafe;
tb_cpu_instr = 1'h1;
tb_cpu_valid = 1'h1;
#(CLK_PERIOD);
tb_cpu_instr = 1'h0;
tb_cpu_valid = 1'h0;
read_word(ADDR_SPI_XFER, 32'h1);
$display("--- test11: completed.");
$display("");
end
endtask // test11
//----------------------------------------------------------------
// tk1_test
//----------------------------------------------------------------
@ -740,6 +835,7 @@ module tb_tk1();
test9();
test9();
test10();
test11();
display_test_result();
$display("");