Add new rosc based entropy source

hw/application_fpga/core/trng/rtl/figaro.v

@@ -46,17 +46,40 @@ module figaro(
   localparam CORE_NAME1        = 32'h726f2020; // "ro  "
   localparam CORE_VERSION      = 32'h00000001;
 
+  localparam SAMPLE_RATE       = 24'h0001000;
+
+
+  //----------------------------------------------------------------
+  // Registers.
+  //----------------------------------------------------------------
+  reg [23 : 0] sample_rate_ctr_reg;
+  reg [23 : 0] sample_rate_ctr_new;
+
+  reg [4 : 0]  bit_ctr_reg;
+  reg [4 : 0]  bit_ctr_new;
+  reg          bit_ctr_we;
+
+  reg [63 : 0] entropy_reg;
+  reg [63 : 0] entropy_new;
+  reg          entropy_we;
+
+  reg          ready_reg;
+  reg          ready_new;
+  reg          ready_we;
+  reg          ready_set;
+  reg          ready_rst;
+
 
   //----------------------------------------------------------------
   // Wires.
   //----------------------------------------------------------------
-  reg           core_read_entropy;
-  reg           core_set_sample_rate;
-  wire [31 : 0] core_entropy;
-  wire          core_ready;
   reg  [31 : 0] tmp_read_data;
   reg           tmp_ready;
 
+  /* verilator lint_off UNOPTFLAT */
+  wire [31 : 0] f;
+  /* verilator lint_on UNOPTFLAT */
+
 
   //----------------------------------------------------------------
   // Concurrent connectivity for ports etc.
@@ -66,17 +89,94 @@ module figaro(
 
 
   //----------------------------------------------------------------
-  // core instantiation.
+  // oscillators.
+  //
+  // 32 single inverters, each connect to itself.
   //----------------------------------------------------------------
-  figaro_core core(
+  genvar i;
-                   .clk(clk),
+  generate
-                   .reset_n(reset_n),
+    for(i = 0 ; i < 32 ; i = i + 1)
-                   .read_entropy(core_read_entropy),
+      begin: oscillators
-                   .set_sample_rate(core_set_sample_rate),
+	/* verilator lint_off PINMISSING */
-                   .sample_rate(write_data[23 : 0]),
+	(* keep *) SB_LUT4 #(.LUT_INIT(16'h1)) osc_inv (.I0(f[i]), .O(f[i]));
-                   .entropy(core_entropy),
+	/* verilator lint_off PINMISSING */
-                   .ready(core_ready)
+      end
-                  );
+  endgenerate
+
+
+  //---------------------------------------------------------------
+  // reg_update
+  //---------------------------------------------------------------
+  always @(posedge clk)
+     begin : reg_update
+       if (!reset_n) begin
+         sample_rate_ctr_reg <= 24'h0;
+	 bit_ctr_reg         <= 6'h0;
+	 entropy_reg         <= 64'h0;
+	 ready_reg           <= 1'h0;
+       end
+       else begin
+         sample_rate_ctr_reg <= sample_rate_ctr_new;
+
+         if (bit_ctr_we) begin
+           bit_ctr_reg <= bit_ctr_new;
+         end
+
+         if (entropy_we) begin
+           entropy_reg <= entropy_new;
+         end
+
+	 if (ready_we) begin
+	   ready_reg <= ready_new;
+	 end
+       end
+     end
+
+
+  //----------------------------------------------------------------
+  // ready_logic
+  //----------------------------------------------------------------
+  always @*
+    begin : ready_logic
+      ready_new = 1'h0;
+      ready_we  = 1'h0;
+
+      if (ready_set) begin
+	ready_new = 1'h1;
+	ready_we  = 1'h1;
+
+      end else if (ready_rst) begin
+	ready_new = 1'h0;
+	ready_we  = 1'h1;
+      end
+    end
+
+
+  //----------------------------------------------------------------
+  // entropy_logic
+  //----------------------------------------------------------------
+  always @*
+    begin : entropy_logic
+      bit_ctr_new = 6'h0;
+      bit_ctr_we  = 1'h0;
+      entropy_we  = 1'h0;
+      ready_set   = 1'h0;
+
+      entropy_new  = {entropy_reg[62 : 0], ^f};
+
+      sample_rate_ctr_new = sample_rate_ctr_reg + 1'h1;
+      if (sample_rate_ctr_reg == SAMPLE_RATE) begin
+	sample_rate_ctr_new = 24'h0;
+	entropy_we          = 1'h1;
+	bit_ctr_new         = bit_ctr_reg + 1'h1;
+	bit_ctr_we          = 1'h1;
+
+	if (bit_ctr_reg == 6'h3f) begin
+	  bit_ctr_new = 6'h0;
+	  ready_set   = 1'h1;
+	end
+      end
+    end
 
 
   //----------------------------------------------------------------
@@ -86,40 +186,24 @@ module figaro(
   //----------------------------------------------------------------
   always @*
     begin : api
-      core_read_entropy    = 1'h0;
+      reg [31 : 0] entropy;
-      core_set_sample_rate = 1'h0;
+
+      ready_rst     = 1'h0;
       tmp_read_data = 32'h0;
       tmp_ready     = 1'h0;
 
+      entropy = entropy_reg[63 : 32] ^ entropy_reg[31 : 0];
+
       if (cs) begin
 	tmp_ready = 1'h1;
-
+	if (!we) begin
-	if (we) begin
-	  if (address == ADDR_SAMPLE_RATE) begin
-	    core_set_sample_rate = 1'h1;
-          end
-	end
-
-	else begin
-	  if (address == ADDR_NAME0) begin
-	    tmp_read_data = CORE_NAME0;
-          end
-
-	  if (address == ADDR_NAME1) begin
-	    tmp_read_data = CORE_NAME1;
-	  end
-
-	  if (address == ADDR_VERSION) begin
-	    tmp_read_data = CORE_VERSION;
-	  end
-
           if (address == ADDR_STATUS) begin
-            tmp_read_data = {31'h0, core_ready};
+            tmp_read_data = {31'h0, ready_reg};
           end
 
           if (address == ADDR_ENTROPY) begin
-            tmp_read_data     = core_entropy;
+            tmp_read_data = entropy;
-            core_read_entropy = 1'h1;
+	    ready_rst     = 1'h1;
           end
 	end
       end