TK-1 and TP-1 PCBs (#52)
* Add kicad library for flat programming clip
* Add descriptions to part symbols
* Add extended values, manufacturer/distributor info to components in mta1
* Add new board entry for TK1
* Add TP1 programmer design
* Update MTA1-USB-V1 release files to match production
* Change SPI flash memory type to XT25F08BDFIGT-S
* Change touch sensor feedback cap to 1uF
* Add manufacturer, manufacturer part number, distributor, distributor part number
* Update component values for TK1 PCB
* Use specific part # for C8
* Change flash back to Winbond part, for easier sourcing
* Change C1 to 1pF
* Fixes for production programmer PCB
* Swap GND and 5V on J3
* Replace graphic logo with text
* Rename part to 'TP-1'
* TK-1 release
* Add dimensions for PCB
* Add layer stackup for PCB
* Change PCB component origin to match expanded board
* Change schematic title to 'TK-1', update release date
* mta1-usb-v1-programmer: Add corrected part numbers for OSFC production
* Q1, Q2, F1 part subsititutions
* add mfr/supplier info for all parts
* PCB library: add parts
* Rectangular footprint for TK-1 test pads
* BOM generation script used for TK-1 and TP-1 releases
* TP-1 release
* Schematic: Add manufacturer, supplier information for all parts
* Schematic: Update name and release date
* PCB: Add PCB fabrication information
* PCB: Correct pinouts on silkscreen
* PCB library: add 'screw' and 'foot' symbols
* Screw is a schematic-only part, for including mechanical screws in the
BOM
* Foot is for self-adhesive rubber mounting feet that can be stuck to
the bottom of a PCB
* TP-1 release: Add screws, feet to the BOM
* Pico library: Add footprint for RPi Pico w/solder paste
* TP-1 RevA release updates:
* Add fiducials in 3 corners (1mm exposed copper ring w/2mm soldermask opening)
* Add solder paste openings to Raspberry Pi Pico pads
* TK-1: RevA.1 release
* Add two fiducials to TK-1 board
* TP-1: Update fuse type to match actual part
* Make placement diagrams for TP-1, TK-1
* Update BC-1-xxx footprints to include placement outlines
* Update TP-1 PCB with new footprints, clean up top fab layer
* Take screenshots of top layers of both boards
* tk-1: fix placement footprints
* Add pin1 marking for ncp footprint
* Add refdes for w25q80 footprint
* Update board with new footprints, clear extraneous text on fab layer
2022-12-22 15:41:46 +00:00
"Source:","C:\Users\matt\Other-Repos\tillitis-key1\hw\boards\tp1\tp1.kicad_sch"
"Date:","11/16/2022 5:57:02 PM"
"Tool:","Eeschema (6.0.4)"
"Generator:","C:\Program Files\KiCad\6.0\bin\scripting\plugins/bom_csv_grouped_by_extended_value.py"
"Component Count:","25"
"Ref","Qnty","Value","Footprint","Description","Manufacturer","Manufacturer Part Number","Supplier","Supplier Part Number"
"F1","1","50mA","Fuse:Fuse_1206_3216Metric","Resettable fuse, polymeric positive temperature coefficient, small symbol","Littelfuse","1206L005/60WR","Digikey","F8129TR-ND"
"FID1,FID2,FID3","3","Fiducial","Fiducial:Fiducial_1mm_Mask2mm","Fiducial Marker","","","",""
"FOOT1,FOOT2,FOOT3,FOOT4","4","Rubber Foot,8mm diameter x 2.8mm height, self-adhesive foot","","","3M","SJ5076","RS","120-6041"
2023-09-01 10:16:53 +00:00
"J3","1","Spring pin strips 1R, 2P 2mm pitch","mta1:BC-1-208","Spring pin, can use one 10P and cut","Mill-Max","836-22-002-30-001101","Mouser","575-8362200230001101"
"J4","1","Spring pin strips 1R, 7P 2mm pitch","mta1:BC-1-701","Spring pin, can use one 10P and cut","Mill-Max","836-22-007-30-001101","Mouser","575-8362200730001101"
TK-1 and TP-1 PCBs (#52)
* Add kicad library for flat programming clip
* Add descriptions to part symbols
* Add extended values, manufacturer/distributor info to components in mta1
* Add new board entry for TK1
* Add TP1 programmer design
* Update MTA1-USB-V1 release files to match production
* Change SPI flash memory type to XT25F08BDFIGT-S
* Change touch sensor feedback cap to 1uF
* Add manufacturer, manufacturer part number, distributor, distributor part number
* Update component values for TK1 PCB
* Use specific part # for C8
* Change flash back to Winbond part, for easier sourcing
* Change C1 to 1pF
* Fixes for production programmer PCB
* Swap GND and 5V on J3
* Replace graphic logo with text
* Rename part to 'TP-1'
* TK-1 release
* Add dimensions for PCB
* Add layer stackup for PCB
* Change PCB component origin to match expanded board
* Change schematic title to 'TK-1', update release date
* mta1-usb-v1-programmer: Add corrected part numbers for OSFC production
* Q1, Q2, F1 part subsititutions
* add mfr/supplier info for all parts
* PCB library: add parts
* Rectangular footprint for TK-1 test pads
* BOM generation script used for TK-1 and TP-1 releases
* TP-1 release
* Schematic: Add manufacturer, supplier information for all parts
* Schematic: Update name and release date
* PCB: Add PCB fabrication information
* PCB: Correct pinouts on silkscreen
* PCB library: add 'screw' and 'foot' symbols
* Screw is a schematic-only part, for including mechanical screws in the
BOM
* Foot is for self-adhesive rubber mounting feet that can be stuck to
the bottom of a PCB
* TP-1 release: Add screws, feet to the BOM
* Pico library: Add footprint for RPi Pico w/solder paste
* TP-1 RevA release updates:
* Add fiducials in 3 corners (1mm exposed copper ring w/2mm soldermask opening)
* Add solder paste openings to Raspberry Pi Pico pads
* TK-1: RevA.1 release
* Add two fiducials to TK-1 board
* TP-1: Update fuse type to match actual part
* Make placement diagrams for TP-1, TK-1
* Update BC-1-xxx footprints to include placement outlines
* Update TP-1 PCB with new footprints, clean up top fab layer
* Take screenshots of top layers of both boards
* tk-1: fix placement footprints
* Add pin1 marking for ncp footprint
* Add refdes for w25q80 footprint
* Update board with new footprints, clear extraneous text on fab layer
2022-12-22 15:41:46 +00:00
"Q1","1","AO3400A","Package_TO_SOT_SMD:SOT-23","30V Vds, 5.7A Id, N-Channel MOSFET, SOT-23","Alpha & Omega","AO3400A","Digikey","785-1000-2-ND"
"Q2","1","AO3401A","Package_TO_SOT_SMD:SOT-23","-4.0A Id, -30V Vds, P-Channel MOSFET, SOT-23","Alpha & Omega","AO3401A","Digikey","785-1001-2-ND"
"R7,R8","2","10K,1/16W,5%","mta1:ERJ2G(0402)_L","Resistor","Any/not critical","","",""
"R11,R12,R13,R14,R15,R16,R17","7","100R,1/16W,5%","mta1:ERJ2G(0402)_L","Resistor","Any/not critical","","",""
"SCREW1,SCREW2,SCREW3","3","M3 Buttonhead Screw,M3x0.5mm buttonhead screw, stainless steel, 5mm length","","","","","McMaster-Carr","94500A263"
"U2","1","Pico","MCU_RaspberryPi_and_Boards:RPi_Pico_SMD_reflow","","Raspberry Pi","SC0915","Digikey","2648-SC0915TR-ND"
