TK-1 and TP-1 PCBs (#52)
* Add kicad library for flat programming clip
* Add descriptions to part symbols
* Add extended values, manufacturer/distributor info to components in mta1
* Add new board entry for TK1
* Add TP1 programmer design
* Update MTA1-USB-V1 release files to match production
* Change SPI flash memory type to XT25F08BDFIGT-S
* Change touch sensor feedback cap to 1uF
* Add manufacturer, manufacturer part number, distributor, distributor part number
* Update component values for TK1 PCB
* Use specific part # for C8
* Change flash back to Winbond part, for easier sourcing
* Change C1 to 1pF
* Fixes for production programmer PCB
* Swap GND and 5V on J3
* Replace graphic logo with text
* Rename part to 'TP-1'
* TK-1 release
* Add dimensions for PCB
* Add layer stackup for PCB
* Change PCB component origin to match expanded board
* Change schematic title to 'TK-1', update release date
* mta1-usb-v1-programmer: Add corrected part numbers for OSFC production
* Q1, Q2, F1 part subsititutions
* add mfr/supplier info for all parts
* PCB library: add parts
* Rectangular footprint for TK-1 test pads
* BOM generation script used for TK-1 and TP-1 releases
* TP-1 release
* Schematic: Add manufacturer, supplier information for all parts
* Schematic: Update name and release date
* PCB: Add PCB fabrication information
* PCB: Correct pinouts on silkscreen
* PCB library: add 'screw' and 'foot' symbols
* Screw is a schematic-only part, for including mechanical screws in the
BOM
* Foot is for self-adhesive rubber mounting feet that can be stuck to
the bottom of a PCB
* TP-1 release: Add screws, feet to the BOM
* Pico library: Add footprint for RPi Pico w/solder paste
* TP-1 RevA release updates:
* Add fiducials in 3 corners (1mm exposed copper ring w/2mm soldermask opening)
* Add solder paste openings to Raspberry Pi Pico pads
* TK-1: RevA.1 release
* Add two fiducials to TK-1 board
* TP-1: Update fuse type to match actual part
* Make placement diagrams for TP-1, TK-1
* Update BC-1-xxx footprints to include placement outlines
* Update TP-1 PCB with new footprints, clean up top fab layer
* Take screenshots of top layers of both boards
* tk-1: fix placement footprints
* Add pin1 marking for ncp footprint
* Add refdes for w25q80 footprint
* Update board with new footprints, clear extraneous text on fab layer
2022-12-22 16:41:46 +01:00
" Source: " , " C:\Users\matt\Other-Repos\tillitis-key1\hw\boards\tp1\tp1.kicad_sch "
" Date: " , " 11/16/2022 5:57:02 PM "
" Tool: " , " Eeschema (6.0.4) "
" Generator: " , " C:\Program Files\KiCad\6.0\bin\scripting\plugins/bom_csv_grouped_by_extended_value.py "
" Component Count: " , " 25 "
" Ref " , " Qnty " , " Value " , " Footprint " , " Description " , " Manufacturer " , " Manufacturer Part Number " , " Supplier " , " Supplier Part Number "
" F1 " , " 1 " , " 50mA " , " Fuse:Fuse_1206_3216Metric " , " Resettable fuse, polymeric positive temperature coefficient, small symbol " , " Littelfuse " , " 1206L005/60WR " , " Digikey " , " F8129TR-ND "
" FID1,FID2,FID3 " , " 3 " , " Fiducial " , " Fiducial:Fiducial_1mm_Mask2mm " , " Fiducial Marker " , " " , " " , " " , " "
" FOOT1,FOOT2,FOOT3,FOOT4 " , " 4 " , " Rubber Foot,8mm diameter x 2.8mm height, self-adhesive foot " , " " , " " , " 3M " , " SJ5076 " , " RS " , " 120-6041 "
2023-09-01 12:16:53 +02:00
" J3 " , " 1 " , " Spring pin strips 1R, 2P 2mm pitch " , " mta1:BC-1-208 " , " Spring pin, can use one 10P and cut " , " Mill-Max " , " 836-22-002-30-001101 " , " Mouser " , " 575-8362200230001101 "
" J4 " , " 1 " , " Spring pin strips 1R, 7P 2mm pitch " , " mta1:BC-1-701 " , " Spring pin, can use one 10P and cut " , " Mill-Max " , " 836-22-007-30-001101 " , " Mouser " , " 575-8362200730001101 "
TK-1 and TP-1 PCBs (#52)
* Add kicad library for flat programming clip
* Add descriptions to part symbols
* Add extended values, manufacturer/distributor info to components in mta1
* Add new board entry for TK1
* Add TP1 programmer design
* Update MTA1-USB-V1 release files to match production
* Change SPI flash memory type to XT25F08BDFIGT-S
* Change touch sensor feedback cap to 1uF
* Add manufacturer, manufacturer part number, distributor, distributor part number
* Update component values for TK1 PCB
* Use specific part # for C8
* Change flash back to Winbond part, for easier sourcing
* Change C1 to 1pF
* Fixes for production programmer PCB
* Swap GND and 5V on J3
* Replace graphic logo with text
* Rename part to 'TP-1'
* TK-1 release
* Add dimensions for PCB
* Add layer stackup for PCB
* Change PCB component origin to match expanded board
* Change schematic title to 'TK-1', update release date
* mta1-usb-v1-programmer: Add corrected part numbers for OSFC production
* Q1, Q2, F1 part subsititutions
* add mfr/supplier info for all parts
* PCB library: add parts
* Rectangular footprint for TK-1 test pads
* BOM generation script used for TK-1 and TP-1 releases
* TP-1 release
* Schematic: Add manufacturer, supplier information for all parts
* Schematic: Update name and release date
* PCB: Add PCB fabrication information
* PCB: Correct pinouts on silkscreen
* PCB library: add 'screw' and 'foot' symbols
* Screw is a schematic-only part, for including mechanical screws in the
BOM
* Foot is for self-adhesive rubber mounting feet that can be stuck to
the bottom of a PCB
* TP-1 release: Add screws, feet to the BOM
* Pico library: Add footprint for RPi Pico w/solder paste
* TP-1 RevA release updates:
* Add fiducials in 3 corners (1mm exposed copper ring w/2mm soldermask opening)
* Add solder paste openings to Raspberry Pi Pico pads
* TK-1: RevA.1 release
* Add two fiducials to TK-1 board
* TP-1: Update fuse type to match actual part
* Make placement diagrams for TP-1, TK-1
* Update BC-1-xxx footprints to include placement outlines
* Update TP-1 PCB with new footprints, clean up top fab layer
* Take screenshots of top layers of both boards
* tk-1: fix placement footprints
* Add pin1 marking for ncp footprint
* Add refdes for w25q80 footprint
* Update board with new footprints, clear extraneous text on fab layer
2022-12-22 16:41:46 +01:00
" Q1 " , " 1 " , " AO3400A " , " Package_TO_SOT_SMD:SOT-23 " , " 30V Vds, 5.7A Id, N-Channel MOSFET, SOT-23 " , " Alpha & Omega " , " AO3400A " , " Digikey " , " 785-1000-2-ND "
" Q2 " , " 1 " , " AO3401A " , " Package_TO_SOT_SMD:SOT-23 " , " -4.0A Id, -30V Vds, P-Channel MOSFET, SOT-23 " , " Alpha & Omega " , " AO3401A " , " Digikey " , " 785-1001-2-ND "
" R7,R8 " , " 2 " , " 10K,1/16W,5% " , " mta1:ERJ2G(0402)_L " , " Resistor " , " Any/not critical " , " " , " " , " "
" R11,R12,R13,R14,R15,R16,R17 " , " 7 " , " 100R,1/16W,5% " , " mta1:ERJ2G(0402)_L " , " Resistor " , " Any/not critical " , " " , " " , " "
" SCREW1,SCREW2,SCREW3 " , " 3 " , " M3 Buttonhead Screw,M3x0.5mm buttonhead screw, stainless steel, 5mm length " , " " , " " , " " , " " , " McMaster-Carr " , " 94500A263 "
" U2 " , " 1 " , " Pico " , " MCU_RaspberryPi_and_Boards:RPi_Pico_SMD_reflow " , " " , " Raspberry Pi " , " SC0915 " , " Digikey " , " 2648-SC0915TR-ND "
