Git-Mirrors/tillitis-key
1
0
Fork 0
mirror of https://github.com/tillitis/tillitis-key1.git synced 2025-01-02 11:26:21 -05:00
Code Issues Packages Projects Releases Wiki Activity
bbbe1e2f31
tillitis-key/hw/boards/mta1-usb-v1/ch552_fw/README.md

31 lines
864 B
Markdown
Raw Normal View History

Make initial public release
2022-09-19 02:51:11 -04:00
# CH552 USB-to-Serial firmware
## Toolchain setup
SDCC:
sudo apt install build-essential sdcc
chprog (for flashing the firmware to a device):
cd ~
Add (hardware) production tests for the TK-1 and TP-1 (#69) * ch552 firmware: add ch55x support files directly * Add sdcc compiler to docker image, for building CH552 firmware * Rework production test script * Add menu-based test runner * Rewrite production test flows as lists of individual tests * Add both production flows and manual tests to menu * Switch to using included binaries * production test: Update message format * test_txrx_touchpad: Retry if device communications fail * production test: put all binaries in binaries/ folder * binaries/top.bin: replace broken binary * flash_check: Check for explicit flash IDs * Document most test procedures * Test plan documentation * Sample udev rules * Production test: allow external references to be overridden * Remove outdated descriptions * Correct shebang * Update shebangs to comply with PEP 394 Change the python scripts to call python instead of python3, as this works cross platform. See: https://peps.python.org/pep-0394/#for-python-script-publishers * Move production test to higher-level directory * Clarify production test setup * Move USB C connector test to separate directory Co-authored-by: Michael Cardell Widerkrantz <mc@tillitis.se>
2023-01-11 10:33:01 -05:00
sudo apt install libusb-1.0-0-dev
Make initial public release
2022-09-19 02:51:11 -04:00
git clone https://github.com/ole00/chprog.git
cd chprog
Add (hardware) production tests for the TK-1 and TP-1 (#69) * ch552 firmware: add ch55x support files directly * Add sdcc compiler to docker image, for building CH552 firmware * Rework production test script * Add menu-based test runner * Rewrite production test flows as lists of individual tests * Add both production flows and manual tests to menu * Switch to using included binaries * production test: Update message format * test_txrx_touchpad: Retry if device communications fail * production test: put all binaries in binaries/ folder * binaries/top.bin: replace broken binary * flash_check: Check for explicit flash IDs * Document most test procedures * Test plan documentation * Sample udev rules * Production test: allow external references to be overridden * Remove outdated descriptions * Correct shebang * Update shebangs to comply with PEP 394 Change the python scripts to call python instead of python3, as this works cross platform. See: https://peps.python.org/pep-0394/#for-python-script-publishers * Move production test to higher-level directory * Clarify production test setup * Move USB C connector test to separate directory Co-authored-by: Michael Cardell Widerkrantz <mc@tillitis.se>
2023-01-11 10:33:01 -05:00
./build_linux.sh
sudo cp chprog /usr/local/bin
Make initial public release
2022-09-19 02:51:11 -04:00
## Usage
Build the firmware using a default serial number:
make
Flash the firmware to a device:
make flash_patched
## Re-programming the firmware
By design, once the USB to serial firmware is loaded onto the chip, there isn't an intended way to reflash it using only software. However, if 3.3V is applied to the D+ line through a 10K resistor during power-up, then the CH552 will enter bootloader mode, and a new firmware can be programmed onto the chip. Note that the CH552 flash is only guaranteed for a few hundred flash cycles.
Reference in New Issue Copy Permalink