tillitis-key/hw/boards/tp1/gerbers/tp1-PTH.drl

71 lines
1.2 KiB
Plaintext
Raw Normal View History

TK-1 and TP-1 PCBs (#52) * Add kicad library for flat programming clip * Add descriptions to part symbols * Add extended values, manufacturer/distributor info to components in mta1 * Add new board entry for TK1 * Add TP1 programmer design * Update MTA1-USB-V1 release files to match production * Change SPI flash memory type to XT25F08BDFIGT-S * Change touch sensor feedback cap to 1uF * Add manufacturer, manufacturer part number, distributor, distributor part number * Update component values for TK1 PCB * Use specific part # for C8 * Change flash back to Winbond part, for easier sourcing * Change C1 to 1pF * Fixes for production programmer PCB * Swap GND and 5V on J3 * Replace graphic logo with text * Rename part to 'TP-1' * TK-1 release * Add dimensions for PCB * Add layer stackup for PCB * Change PCB component origin to match expanded board * Change schematic title to 'TK-1', update release date * mta1-usb-v1-programmer: Add corrected part numbers for OSFC production * Q1, Q2, F1 part subsititutions * add mfr/supplier info for all parts * PCB library: add parts * Rectangular footprint for TK-1 test pads * BOM generation script used for TK-1 and TP-1 releases * TP-1 release * Schematic: Add manufacturer, supplier information for all parts * Schematic: Update name and release date * PCB: Add PCB fabrication information * PCB: Correct pinouts on silkscreen * PCB library: add 'screw' and 'foot' symbols * Screw is a schematic-only part, for including mechanical screws in the BOM * Foot is for self-adhesive rubber mounting feet that can be stuck to the bottom of a PCB * TP-1 release: Add screws, feet to the BOM * Pico library: Add footprint for RPi Pico w/solder paste * TP-1 RevA release updates: * Add fiducials in 3 corners (1mm exposed copper ring w/2mm soldermask opening) * Add solder paste openings to Raspberry Pi Pico pads * TK-1: RevA.1 release * Add two fiducials to TK-1 board * TP-1: Update fuse type to match actual part * Make placement diagrams for TP-1, TK-1 * Update BC-1-xxx footprints to include placement outlines * Update TP-1 PCB with new footprints, clean up top fab layer * Take screenshots of top layers of both boards * tk-1: fix placement footprints * Add pin1 marking for ncp footprint * Add refdes for w25q80 footprint * Update board with new footprints, clear extraneous text on fab layer
2022-12-22 10:41:46 -05:00
M48
; DRILL file {KiCad (6.0.4)} date Tue Nov 15 10:47:33 2022
; FORMAT={-:-/ absolute / inch / decimal}
; #@! TF.CreationDate,2022-11-15T10:47:33+01:00
; #@! TF.GenerationSoftware,Kicad,Pcbnew,(6.0.4)
; #@! TF.FileFunction,Plated,1,2,PTH
FMAT,2
INCH
; #@! TA.AperFunction,Plated,PTH,ViaDrill
T1C0.0118
; #@! TA.AperFunction,Plated,PTH,ComponentDrill
T2C0.0394
; #@! TA.AperFunction,Plated,PTH,ComponentDrill
T3C0.1260
%
G90
G05
T1
X4.6969Y-4.1024
X4.7Y-4.5472
X5.2008Y-4.2638
X5.5315Y-4.0236
X5.6594Y-5.2106
T2
X4.9803Y-2.0079
X4.9803Y-2.1079
X4.9803Y-2.2079
X4.9803Y-2.3079
X4.9803Y-2.4079
X4.9803Y-2.5079
X4.9803Y-2.6079
X4.9803Y-2.7079
X4.9803Y-2.8079
X4.9803Y-2.9079
X4.9803Y-3.0079
X4.9803Y-3.1079
X4.9803Y-3.2079
X4.9803Y-3.3079
X4.9803Y-3.4079
X4.9803Y-3.5079
X4.9803Y-3.6079
X4.9803Y-3.7079
X4.9803Y-3.8079
X4.9803Y-3.9079
X6.0827Y-2.0079
X6.0827Y-2.1079
X6.0827Y-2.2079
X6.0827Y-2.3079
X6.0827Y-2.4079
X6.0827Y-2.5079
X6.0827Y-2.6079
X6.0827Y-2.7079
X6.0827Y-2.8079
X6.0827Y-2.9079
X6.0827Y-3.0079
X6.0827Y-3.1079
X6.0827Y-3.2079
X6.0827Y-3.3079
X6.0827Y-3.4079
X6.0827Y-3.5079
X6.0827Y-3.6079
X6.0827Y-3.7079
X6.0827Y-3.8079
X6.0827Y-3.9079
T3
X5.1201Y-4.7244
X5.9035Y-4.3799
X5.9035Y-5.0689
T0
M30