mirror of
https://github.com/nhammer514/textfiles-politics.git
synced 2024-10-01 01:15:38 -04:00
49 lines
3.1 KiB
Plaintext
49 lines
3.1 KiB
Plaintext
<conspiracyFile>TESLA COIL THEORY
|
||
LINE VOLTAGE IS STEPPED UP BY THE HIGH-VOLTAGE TRANSFORMER TO A
|
||
MAGNITUDE SUFFICIENT TO CHARGE THE CAPACITOR AND FORCE THE SPARK GAP TO
|
||
BREAK DOWN. THIS ACTION IS REPEATED AT THE 60 HERTZ LINE FREQUENCY.
|
||
EFFICIENT ENERGY TRANSFER IS ENHANCED BY CHOOSING A CAPACITOR WHOSE
|
||
IMPEDANCE IS EQUAL TO THAT OF THE SECONDARY WINDING.
|
||
ESSENTIALLY, THE CAPACITOR AND TESLA COIL PRIMARY FORM ONE PAIR OF
|
||
TANK CIRCUTS: WHEN THE SPARK GAP ARCS, THE MOMENTARY SHORT CIRCUT
|
||
CREATED DUMPS THE CAPACITOR'S CHARGE INTO THE COIL'S PRIMARY. THE
|
||
RESULTING L-C CIRCUT RINGS AS THE CHARGE OSCILLATES BACK AND FORTH
|
||
BETWEEN THE CAPACITOR AND THE COIL. THE OSCILLATIONS DECREASE IN
|
||
AMPLITUDE AS THE CHARGE IS DISSIPATED BY RESISTANCE. THE RINGING
|
||
GENERATES WHAT IS REFFERRED TO AS A "DAMPED WAVE". THE NEXT HALF-CYCLE
|
||
OF 60-HZ RECHARGES THE CAPACITOR, STARTING THE PROCESS ANEW. A TRAIN OF
|
||
HI-FREQUENCY WAVES, SPACED AT 60-HZ INTERVALS, IS THE PRODUCT.
|
||
RESONANCE MUST BE ACHIEVED TO EFFECT RINGING: THIS DEMANDS THE
|
||
CAPACITOR AND PRIMARY HAVE THE SAME REACTANCE:
|
||
X(L) = X(C) THE CIRCUT RESISTANCE (CAPACITOR, COIL AND INTERMEDIATE
|
||
WIRING) LIMITS THE OVERALL EFFICIENCY OF THE TANK CIRCUT. EFFICIENCY IS
|
||
RATED IN TERMS OF "QUALITY FACTOR", REPRESENTED AS 'Q':
|
||
Q = W(L)/R = X(C)/R
|
||
INCREASING RESISTANCE REDUCES Q, THEREBY REDUCING EFFICIENCY. THE
|
||
EFFECT IS MINIMIZED BY WINDING THE PRIMARY WITH A FEW TURNS OF HEAVY
|
||
CONDUCTOR, WELL-SPACED, OVER A LARGE RADIUS FORM - THE LARGER THE
|
||
BETTER. THE CAPACITOR SIZE AND CONSTRUCTION ALSO BEAR UPON Q: THE
|
||
PHYSICAL SIZE AND AREA SHOULD BE MINIMIZED. THIS, HOWEVER, WORKS
|
||
AGAINST LARGE CAPACITANCE VALUES AND DICTATES THE COIL BE WOUND WITH
|
||
MORE TURNS. THE GOAL, THEN, IS TO ACHIEVE A WORKABLE RANGE OF COMPONENT
|
||
SPECIFICATIONS RATHER THAN TO STRIVE FOR OVERLY CLOSE TOLERANCES. COILS
|
||
OFTEN ARE WOUND WITH TAPPED PRIMARIES TO FACILITATE FINE TUNING.
|
||
THE SECONDARY COIL IS SITUATED BOTH ELECTRICALLY AND PHYSICALLY WITHIN
|
||
THE PRIMARY. THE SECONDARY AND ITS DISCHARGE ELECTRODE, GENERALLY A
|
||
SPHERE OR TOROID, MAKE UP THE SECOND TUNED CIRCUT. THE WINDING SUPPLIES
|
||
INDUCTANCE; THE CAPACITOR IS CREATED BY THE ELECTRODE AND THE (EARTH)
|
||
GROUND-PLANE. AIR IS THE DIELECTRIC. MOST TESLA COILS EMPLOY
|
||
SECONDARIES OF 1/4-WAVELENGTH AT THEIR OPERATING FREQUENCIES. THIS
|
||
ESTABLISHES A CONFIGURATION WITH MAXIMUM CURRENT AT ZERO VOLTAGE WITH
|
||
MINIMUM CURRENT AT THE ELECTRODE. THIS SITUATION PROVES TO BE
|
||
BENEFICIAL, IN THAT IT ENHANCES COUPLING WITH THE HIGH CURRENT PRIMARY,
|
||
AVOIDS ARCHING BETWEEN THE PRIMARY AND SECONDARY AND GENERATES THE
|
||
DESIRED HIGH VOLTAGE AT THE TOP END.
|
||
THE "OUDIN COIL IS A 1/2-WAVE VARIATION ON THE TESLA COIL. IT
|
||
POSSESSES THE ESSENTIAL TESLA COIL OPERATIONAL CHARACTERISTICS, BUT IT
|
||
EMPLOYS A HORIZONTALLY PLACED SECONDARY WITH DISCHARGE ELECTRODES AT
|
||
BOTH ENDS AND A PRIMARY AT THE CENTER. THE OUDIN PRIMARY SOMETIMES IS
|
||
MERELY A PAIR OF TAPS ON THE SECONDARY (AN AUTOTRANSFORMER). THE 1/2-
|
||
WAVE ARRANGEMENT AFFORDS A COIL WITH MAXIMUM DISCHARGE AT EACH END AND
|
||
A VIRTUAL GROUND AT THE MIDPOINT OF THE WINDING(S).
|
||
</conspiracyFile> |