mirror of
https://github.com/nhammer514/textfiles-politics.git
synced 2024-12-26 07:49:37 -05:00
235 lines
11 KiB
Plaintext
235 lines
11 KiB
Plaintext
<conspiracyFile>/==\ \ / /==\ \ /== /<div>\
|
||
\/ \ The Resonant Gravity Field Coil
|
||
+==+ Systems Present: (or: how to manipulate reality
|
||
/\ \in a 530 square inch area)
|
||
===/ \=/ \=\==/=/ \ \<div>/
|
||
<div>
|
||
By (_>Shadow Hawk<_) Theory, concept, and Idea by: ?????????????????????
|
||
<div>
|
||
NOTICE: Within this file will be presented a potential method of altering
|
||
the spatiotemporal continuum as one desires. I take no responsibility for any
|
||
use or misuse of this information, whether harmful or otherwise. The effects
|
||
of this device, if used in a careless manner, can be EXTREMELY DANGEROUS.
|
||
<div>
|
||
Gravity Resonance? What is this nut talking about?????
|
||
<div>
|
||
You are probably thinking, "how can gravity possibly be resonant?" This is
|
||
a good question. As discovered by Thomas Townsend Brown, electricity is
|
||
directly related to gravity (see his U.S. patents 1974483, 3187206 in
|
||
particular.) If this is so, it is most likely a vectorial relationship (law of
|
||
opposites), and since there is already an electromagnetic vector (2
|
||
dimensional), a gravitational vector would be at 90 degrees to both the
|
||
magnetic and the electric vectors (since we are in a 3 dimensional space.) The
|
||
gravitational vector is like the "duration in time" of the electric and
|
||
magnetic vectors. There are also, in addition to scalar electric and magnetic
|
||
waves (see Bearden, Thomas E. "Toward a new electromagnetics: part IV: vectors
|
||
and mechanisms clarified. Tesla Book Co., Millbrae, California, 1983. This
|
||
work, however, fails to mention gravity waves, although it does mention
|
||
controlling gravity), there are also scalar gravitic waves (see Ford, L.H and
|
||
A. Vilenkin. "A gravitational analogue of the Aharanov-Bohm effect." Journal of
|
||
Physics A. Mathematical, Nuclear, and General. (Great Britan). 14(9), Sep.
|
||
1981. p. 2353-2357.)
|
||
<div>
|
||
Okay. So There are gravity waves. How can resonating them control reality?
|
||
<div>
|
||
All of the above has been proven; this is where basically theory comes in.
|
||
There has been much supposed experimental proof of these effects, however all
|
||
current research is, unfortuneatly, proprietary, and it is extremely hard to
|
||
come by anything helpful. The only good sources of information are some small
|
||
mail order book stores, and no one store has everything. One example of
|
||
publicized experimental proof is the information regarding the largely ignored
|
||
bierfield brown effect, whereby gravity can be nullified and even reversed due
|
||
to electric charge (see Thomas Townsend Brown, Above patents), and the book on
|
||
the philidelphia experiment (and NOT THE MOVIE! The movie was fiction, the book
|
||
is an attempt to analyze what little fact is known.) The true philidelphia
|
||
experiment, if it actually occured, used a navy ship degausser modified to act
|
||
as some type of resonant gravity vector coil.
|
||
The actual theory is that, since electricity can be "transmitt
|
||
d" through the ether through electric scalar and vector waves, and magnetic
|
||
energy through magnetic scalar and vector waves, why not gravitational scalar
|
||
and vector waves, if they do exist (law of opposites)? A gravity wave is the
|
||
emporal "shape" of the electric and magnetic vector (I hope this is a good
|
||
explanation!), and by changing this shape you are changing the mole
|
||
ular construction of the matter (or lack thereof) transmitting the waves
|
||
Also, since there are an infinite number of paralell, real universes (see
|
||
Hypernumbers II, by Charles Muses, January 1978 "Applied Mathematics and
|
||
Computation", and his introduction to Jerome Rothstein's "Communication,
|
||
Organization, and Science," The Falcon's Wing Press, Indian Hills, CO, 1958),
|
||
the gravity vector coil MAY allow the psychic (scalar electromagnetic brain
|
||
wave) postulation of reality through the G-vector. This could also be done with
|
||
a computer, but both are beyond the scope of this paper. I will now present the
|
||
plans for the construction of a simple G-vector coil. What you do with it from
|
||
here is up to you, show it to your physics teachers and have them look up the
|
||
references and watch their eyes pop as they find out the speed of light is NOT
|
||
constant.
|
||
<div>
|
||
Parts List
|
||
<div>
|
||
This, actually, is the hardest part. You will either have to spend a lot
|
||
of $$$ at a plastics company or have some good friends to get but one of the
|
||
parts needed, the others should be fairly easy.
|
||
Listed in order of availability
|
||
(2) 50 VDC (DC-10 MHZ preferred, but...) @ 10A, 50KV isolated power
|
||
supplies
|
||
(parts list for those:)
|
||
(2) 110 VAC to 48 VDC @ 10A Isolated stepdown transformers (500 watt)
|
||
(2) 100V PIV rectifier diode
|
||
Optional (2) Heatsinks for above
|
||
(2) 0-120 VAC @ 10A variacs (variable autotransformer)
|
||
(2) 80-100V @ 1000uF electrolytic capacitors
|
||
Optional (1 or 2) Case to hold it all in
|
||
(1) 25-100 KVDC (again, DC-10 MHZ preferred...) @ 100-400 uA (not necessarily variable) 50 kV isolated power supply
|
||
(parts list)
|
||
(1) 10-12 KV @ 20-30 mA neon sign transformer
|
||
(4) TV HV diodes - 12-14 KV PIV
|
||
(4) HV capacitors, 500-1000 pF @ 10 KV
|
||
(1) 0-120 VAC @ 10A variac (variable autotransformer)
|
||
(1) Case to put it all in
|
||
about 7500 feet of #16 Guage heavy Formvar magnetwire
|
||
alot (probably 5000 feet) of #20 or #22 magnetwire
|
||
some fiberglass tape
|
||
some plastic tape
|
||
TV HV corona dope
|
||
And, the clincher:
|
||
(1) Hollow plastic dia., about 30"-32" outside diameter, 24-26" inner
|
||
diameter, and about 4"-6" thick. It must be hollow, thermosetting plastic, with
|
||
supports for an internal coil of wire, and two holes for the wire to leave,
|
||
spaced to avoid electrical discharges. It must be boiling wax-tight,
|
||
preferrably with a gasket. And it should be openable, at least into 4 sections,
|
||
with screwholes (and gaskets if available.)
|
||
You also need enough of equal portions of Carnubura (sp), beeswax, and
|
||
paraffin wax to fill the inside.
|
||
<div>
|
||
Construction
|
||
<div>
|
||
(1) Wind a 28" (about, must center inside the hollow part of the plastic donut)
|
||
"hoop" coil of the #16 magnetwire. (see Illustration 1)
|
||
(2) Wrap first with fiberglass and then plastic tape, and then dip it in TV HV
|
||
corona dope. Allow to dry.
|
||
(3) Place the coil inside the hollow donut.
|
||
(4) Seal the donut, allowing an opening for the wax to be poured into.
|
||
(5) Pour the wax into the donut, leaving as little air space as possible.
|
||
(6) Seal the donut, adding any extra wax.
|
||
(7) Wrap approximately one layer of the #20 or #22 guage magnetwire over the
|
||
outside of the donut.
|
||
(8) Coat with HV corona dope.
|
||
(9) You are finished with the coil. It should look similar to illustration 2.
|
||
See illustration 3 for a cutaway view.
|
||
Illustration 1:
|
||
<div>
|
||
Top View Side View
|
||
__
|
||
<div>/--\ <div> 1000 turns #16 magnetwire <div> __//
|
||
__/
|
||
---\__/ --
|
||
<div>
|
||
Illustration 2:
|
||
<div>
|
||
Top View Side View
|
||
<div> /<div>\
|
||
\\// / / / \ \ \
|
||
\/ \/--- Outer Layer of #20 ---
|
||
- -or #22 magnetwire
|
||
/\ /\
|
||
//\\ \ \ \ / / /
|
||
--- \<div>/
|
||
<div>
|
||
Illustration 3:
|
||
<div>
|
||
Cutaway (side) View
|
||
<div>
|
||
/ / / / / // / / // / / / \ \ \ \\ \ \ \\ \ \ \ \
|
||
/ / / / / // / / / <div> \ \ \ \\ \ \ \ \
|
||
/ / / / / / <div>/<div>\<div> \ \ \ \ \
|
||
<div>/<div><div><div>\<div>
|
||
Plastic Donut ---<div><div><div>
|
||
(hidden by wire)<div><div><div>
|
||
<div>\<div> <-\ <div><div>/<div>
|
||
\ \ \ \ \ \ <div>\ \ === /<div> / / / / /
|
||
\ \ \ \ \ \\ \ \ \ ^ / / / // / / / /
|
||
\ \ \ \ \ \\ \ \ \\ \ \ \ / / / // / / // / / / /
|
||
<div> ^ <div>
|
||
Torodial Plastic "Donut"<div>^ \-The ='s represent the inner "hoop"
|
||
Outer later of #20 or #22 magnetwire/ coil of wire.
|
||
The *'s represent the wax misture-/
|
||
<div>
|
||
<div>
|
||
Building The Power Supplies
|
||
<div>
|
||
If you are unfamiliar with electronics, you may need some help with this
|
||
section, as I am only presenting the schematics. Here they are:
|
||
For both 50VDC power supplies:
|
||
<div>
|
||
/---\ /\
|
||
v 100V Piv 15A diode / \
|
||
_mmmmm_+__ <div>\__+<div>/0-15\__+
|
||
/ Variac )( /1000 uF @ 80 V \DC A/
|
||
=)<div> 110)(48 --- electrolytic \ /
|
||
\<div>)(<div> /-\ \/
|
||
120 VAC 110V to 48V \ -
|
||
Grounded Plug 10A Transformer \_+<div>-
|
||
(2) of theese are required. Note that
|
||
the stepdown transformer must be 50kv isolated.
|
||
<div>
|
||
For the 100 KVDC power supply:
|
||
<div>
|
||
/---\
|
||
v
|
||
_mmmmm_+__ <div>+<div>+<div>
|
||
/ Variac )( __ __ HV
|
||
=)<div> 110)(8-10KV / \ /14KV PIV /-\cap
|
||
\<div>)(<div>_ _v_ TV HV
|
||
120 VAC 100V to 8-10KV \ \ Diode +<div>+<div>
|
||
Grrounded Plug 100uA Transformer ^ \__+ __ \
|
||
800-1000 pf 10KV \ TV HV-^- \ /TV HV
|
||
capacitor \ diode/ \ -v-diode
|
||
\ -- __ /\
|
||
\<div>+ + HV /-\ / \
|
||
Note that all unmarked parts cap / 0- \
|
||
have the same value as their / +_/ 1000 \_
|
||
marked counterparts. +__+_ \ /
|
||
\ \ -^- \ uA /
|
||
HV cap / \ \ /
|
||
-- \/
|
||
\
|
||
\<div>/ TV HV
|
||
diode
|
||
<div>
|
||
<div>
|
||
Usage
|
||
<div>
|
||
To connect the power supplies to the coil, connect the wires leading out
|
||
of the donut (from the inner coil) to one 50 VDC power supply. The polarity, at
|
||
this stage, does not matter. Next, connect the leads from the outer coil to the
|
||
other 50 VDC power supply. Do NOT turn either of them on! Now, connect one of
|
||
the leads of the inner coil to one terminal of the 25-100 KV power supply, and connect one lead of the outer coil to the other terminal of the 25-100 KV power supply. Thats it!
|
||
Now, the hard part. You will have to figure out some way of modulating the
|
||
fields. This could be done through stepper motor control of the variac, or
|
||
through the insertion of a probe coil (probably just a ferrite rod wrapped with
|
||
a few hundred turns of wire) into the center of the donut hole. This would
|
||
then be modulated with whatever electromagnetic signal you'd want to impress
|
||
upon the field. Through careful experimentation, you should be able to produce
|
||
some very interesting effects, such as extreme gravity, bending of metal within
|
||
the field, spontaneous materialization of ?, etc. Note that the purpose of the
|
||
wax is to act as a molten dielectric, so don't be surprised when it starts
|
||
boiling. Thats why the donut form must be made out of thermosetting (or any
|
||
kind that doesnt melt near the temperature of boiling wax) plastic.
|
||
Have phun, and don't do anything you wouldnt want perpetuated throughout
|
||
your subjective reality!
|
||
(_>Shadow Hawk<_)
|
||
<div>
|
||
Call theese fine boards:
|
||
|
||
Ripco (312)-528-5020
|
||
Wildfire Invitation Only
|
||
Pirate 80 (304)-744-2253
|
||
<div>
|
||
<EFBFBD><EFBFBD><EFBFBD><EFBFBD><EFBFBD><EFBFBD><EFBFBD><EFBFBD><EFBFBD><EFBFBD><EFBFBD><EFBFBD><EFBFBD><EFBFBD><EFBFBD><EFBFBD><EFBFBD><EFBFBD><EFBFBD><EFBFBD><EFBFBD><EFBFBD><EFBFBD><EFBFBD><EFBFBD><EFBFBD><EFBFBD><EFBFBD><EFBFBD><EFBFBD><EFBFBD><EFBFBD><EFBFBD><EFBFBD><EFBFBD><EFBFBD><EFBFBD><EFBFBD><EFBFBD><EFBFBD><EFBFBD><EFBFBD><EFBFBD><EFBFBD><EFBFBD><EFBFBD><EFBFBD><EFBFBD><EFBFBD><EFBFBD><EFBFBD><EFBFBD><EFBFBD><EFBFBD><EFBFBD><EFBFBD><EFBFBD><EFBFBD><EFBFBD><EFBFBD><EFBFBD><EFBFBD><EFBFBD><EFBFBD><EFBFBD><EFBFBD><EFBFBD><EFBFBD>
|
||
ݰ 10-22-89 The PIRATES' HOLLOW <20><>
|
||
ݰ Gfile Distribution Center / MASS Megs <20><>
|
||
ݰ 415/236/2371 RoR - Alucard 415/236/2371 <20><>
|
||
ݰ Sysops: Doctor Murdock ~ Sir Death ~ Dark Nite ~ Ratsnatcher <20><>
|
||
ݰShawn-Da-Lay Boy Production Inc. The Electric Pub : 415/236/4380<38><30>
|
||
ݰ<EFBFBD><EFBFBD><EFBFBD><EFBFBD> The Gates of Hell are open Night and Day; <20><><EFBFBD><EFBFBD><EFBFBD><EFBFBD>
|
||
ݱ<EFBFBD><EFBFBD> <20> Smooth is the Descent and Easy is the Way <20> <20><><EFBFBD><EFBFBD>
|
||
<EFBFBD><EFBFBD><EFBFBD><EFBFBD><EFBFBD><EFBFBD><EFBFBD><EFBFBD><EFBFBD><EFBFBD><EFBFBD><EFBFBD><EFBFBD><EFBFBD><EFBFBD><EFBFBD><EFBFBD><EFBFBD><EFBFBD><EFBFBD><EFBFBD><EFBFBD><EFBFBD><EFBFBD><EFBFBD><EFBFBD><EFBFBD><EFBFBD><EFBFBD><EFBFBD><EFBFBD><EFBFBD><EFBFBD><EFBFBD><EFBFBD><EFBFBD><EFBFBD><EFBFBD><EFBFBD><EFBFBD><EFBFBD><EFBFBD><EFBFBD><EFBFBD><EFBFBD><EFBFBD><EFBFBD><EFBFBD><EFBFBD><EFBFBD><EFBFBD><EFBFBD><EFBFBD><EFBFBD><EFBFBD><EFBFBD><EFBFBD><EFBFBD><EFBFBD><EFBFBD><EFBFBD><EFBFBD><EFBFBD><EFBFBD><EFBFBD><EFBFBD><EFBFBD><EFBFBD></conspiracyFile> |