qusal/salt/sys-audio

sys-audio

Audio operations in Qubes OS.

Table of Contents

• Description
• Installation
• Usage
  • Audio control
  • Client switched it's AudioVM
  • Client started before it's AudioVM
  • Client turned off with a device attached
  • How to use USB devices
  • How to use Bluetooth
    • How to make the Bluetooth icon appear in the system tray
    • How to attach the Bluetooth controller to the AudioVM persistently

Description

Creates the named disposable "disp-sys-audio" qube for providing audio operations such as microphone and speakers to and from qubes. By default, you can use the builtin stereo, JACK and USB , but if you want, you can install the necessary packages for bluetooth with the provided state.

Installation

• Top

sudo qubesctl top.enable sys-audio
sudo qubesctl --targets=tpl-sys-audio,dvm-sys-audio state.apply
sudo qubesctl top.disable sys-audio

• State

sudo qubesctl state.apply sys-audio.create
sudo qubesctl --skip-dom0 --targets=tpl-sys-audio state.apply sys-audio.install
sudo qubesctl --skip-dom0 --targets=dvm-sys-audio state.apply sys-audio.configure-dvm

If you want to autostart the AudioVM on boot, you may run:

sudo qubesctl state.apply sys-audio.autostart

If you need Bluetooth support, install the dependencies:

sudo qubesctl --skip-dom0 --targets=tpl-sys-audio state.apply sys-audio.install-bluetooth

Usage

Audio control

The qube disp-sys-audio will be used for audio capabilities for speakers and microphone, with builtin modules, Jack port or Bluetooth. You are be able to control the volume via the volume icon that appears on the system tray.

Audio control basics:

• Left click toggles the volume; and
• Scrolling the mouse from left to right changes the volume;

For more advanced features, right click the icon and click on Open Mixer or Prefences. For greater control, use the command amixer.

Client switched it's AudioVM

If the client has already started when you decided to switch the AudioVM, you will need to restart the client qube until upstream issue is fixed.

Client started before it's AudioVM

Audio will not automatically connect if the AudioVM starts after the client. To connect the client to audio server, restart the client's Pipewire service:

systemctl --user restart pipewire

Client turned off with a device attached

If you shutdown a client qube with a device attached, such as a microphone or speaker, normal operation to attach the device to the same or any other qube will fail. To be able to use the device again:

• Restart the AudioVM disp-sys-audio;
• Restart the audio client; and
• Attach the device to the audio client.

How to use USB devices

Please refer to the sys-usb formula instructions.

How to use Bluetooth

How to make the Bluetooth icon appear in the system tray

Note that the only way to autostart the Bluetooth icon (blueman-tray) in the system tray is to attach the Bluetooth controller persistently to the AudioVM.

If you don't do this, you will have to attach the Bluetooth controller manually to disp-sys-audio after it has started and also run blueman-tray.

How to attach the Bluetooth controller to the AudioVM persistently

If using Bluetooth, you probably want to have it persistently attached to the AudioVM. Bluetooth devices are held by the USB stack, thus you need to attach from your (disp-)sys-usb to the disp-sys-audio.

Note that if you attach the device persistently, the AudioVM will not be able to start without first starting the backend holding the USB stack. You can move the controller from the USB qube to the Audio qube, but this would decrease your system security.

First, start the qube holding the USB stack:

qvm-start disp-sys-usb

Identify you Bluetooth controller:

qvm-usb list disp-sys-usb

If you haven't identified the device, run lsusb in the USB stack server:

qvm-run -p disp-sys-usb -- lsusb

Permanently attach the Bluetooth controller to the AudioVM (change DEVID for the one you identified above):

qvm-usb attach --persistent disp-sys-audio disp-sys-usb:DEVID