Commit Graph

11 Commits

Author SHA1 Message Date
Thomas Leonard
672c82c43c Combine Client_gateway and Firewall_uplink
Before, we used Client_gateway for the IP address of the firewall on the
client network and Firewall_uplink for its address on the uplink
network. However, Qubes 4 uses the same IP address for both, so we can't
separate these any longer, and there doesn't seem to be any advantage to
keeping them separate anyway.
2019-05-16 19:30:51 +01:00
Thomas Leonard
bb78a726e4 Mirage 3 support 2017-03-04 17:22:58 +00:00
Thomas Leonard
a7001a70d2 Allow clients to have any IP address
We previously assumed that Qubes would always give clients IP addresses
on a particular network. However, it is not required to do this and in
fact uses a different network for disposable VMs.

With this change:

- We no longer reject clients with unknown IP addresses
- The `Unknown_client` classification is gone; we have no way to tell
  the difference between a client that isn't connected and an external
  address.
- We now consider every client to be on a point-to-point link and do not
  answer ARP requests on behalf of other clients. Clients should assume
  their netmask is 255.255.255.255 (and ignore /qubes-netmask).

This is a partial fix for #9. It allows disposable VMs to connect to the
firewall but for some reason they don't process any frames we send them
(we get their ARP requests but they don't get our replies). Taking eth0
down in the disp VM, then bringing it back up (and re-adding the routes)
allows it to work.
2016-09-25 16:34:22 +01:00
Thomas Leonard
62aec06be9 Try to avoid running out of memory on NAT reset
Before, when resetting the NAT table to handle an out-of-memory
condition we tried to allocate the new table while still holding
the reference to the old one. It should be more reliable to drop
the old reference first.

Log showed:

    2016-01-31 19:33.47: INF [firewall] added NAT redirect 10.137.3.12:32860 -> 53:firewall:52517 -> 53:net-vm
    2016-01-31 19:33.52: WRN [firewall] Out_of_memory adding NAT rule. Dropping NAT table...
    --- End dump ---
    Fatal error: exception Out of memory
    Raised by primitive operation at file "hashtbl.ml", line 63, characters 52-70
    Called from file "router.ml", line 47, characters 11-30
    Called from file "src/core/lwt.ml", line 907, characters 20-24
    Mirage exiting with status 2
    Do_exit called!
2016-01-31 21:03:35 +00:00
Thomas Leonard
e05a92da50 Update to new Logs API
Note: this reintroduces mirage-qubes pin, as that uses Logs too.
2016-01-08 11:40:11 +00:00
Thomas Leonard
425ba26286 Reset NAT table if memory gets low 2016-01-02 15:50:05 +00:00
Thomas Leonard
2002126b8b Rationalised firewall rules syntax
Added explicit NAT target, allowing NAT even within client net and
making it clear that NAT is used externally.

Changed Redirect_to_netvm to NAT_to, and allow specifying any target
host.
2016-01-01 11:32:57 +00:00
Thomas Leonard
cd69ce5a86 Move NAT code to router and add DNS redirects 2015-12-30 19:34:04 +00:00
Thomas Leonard
5a2f6f7ce8 Minor cleanups 2015-12-30 14:32:59 +00:00
Thomas Leonard
9dc7d01896 Moved client networking to its own module
Renamed the old Client_net to Client_eth, as it just handles the
Ethernet layer.
2015-12-30 13:52:56 +00:00
Thomas Leonard
914b6bbbf6 Initial import 2015-12-30 11:07:17 +00:00