--- lang: en layout: doc permalink: /doc/hvm-troubleshooting/ ref: 232 title: HVM Troubleshooting --- ## HVM pauses on boot, followed by kernel error The HVM may pause on boot, showing a fixed cursor. After a while a series of warnings may be shown similar to this: ` BUG: soft lockup - CPU#0 stuck for 23s! [systemd-udevd:244] ` To fix this: 1. Kill the HVM. 1. Start the HVM 1. Press "e" at the grub screen to edit the boot parameters 1. Find the /vmlinuz line, and edit it to replace "rhgb" with "modprobe.blacklist=bochs_drm" 1. Press "Ctrl-x" to start the HVM If this solves the problem then you will want to make the change permanent: 1. Edit the file `/etc/default/grub`. 1. Find the line which starts: ~~~ GRUB_CMDLINE_LINUX= ~~~ 1. Remove this text from that line: ~~~ rhgb ~~~ 1. Add this text to that line: ~~~ modprobe.blacklist=bochs_drm ~~~ 1. Run this command: ~~~ grub2-mkconfig --output=/boot/grub2/grub.cfg ~~~ The HVM should now start normally. ## Can't start an OS in an HVM / "Probing EDD (edd=off to disable!... ok" message If you see a screen popup with SeaBios and 4 lines, last one being `Probing EDD (edd=off to disable!... ok`, then enter the following command from a `dom0` prompt: ```sh qvm-prefs kernel "" ``` ## HVM crashes when booting from ISO If your HVM crashes when trying to boot an ISO, first ensure that ` qvm-prefs kernel` is empty, as shown above. If this doesn't help, then disable memory balancing and set the minimum memory to 2GB. You can disable memory-balancing in the settings, under the “Advanced” tab. To give the VM a RAM of 2GB, open a terminal in `dom0` and enter: ```sh qvm-prefs memory 2000 ``` ## Attached devices in Windows HVM stop working on suspend/resume After the whole system gets suspended into S3 sleep and subsequently resumed, some attached devices may stop working. To know how to make the devices work, see [Suspend/resume Troubleshooting](/doc/suspend-resume-troubleshooting/#attached-devices-in-windows-hvm-stop-working-on-suspendresume).