--- layout: doc title: Emergency Backup Recovery (v4) permalink: /doc/backup-emergency-restore-v4/ redirect_from: - /en/doc/backup-emergency-restore-v4/ - /doc/BackupEmergencyRestoreV4/ --- Emergency Backup Recovery without Qubes (v4) ============================================ This page describes how to perform an emergency restore of a backup created on Qubes R4.X (which uses backup format version 4). The Qubes backup system has been designed with emergency disaster recovery in mind. No special Qubes-specific tools are required to access data backed up by Qubes. In the event a Qubes system is unavailable, you can access your data on any GNU/Linux system with the following procedure. Required `scrypt` Utility ------------------------- In Qubes 4.X, backups are encrypted and integrity-protected with [scrypt]. You will need a copy of this utility in order to access your data. Since `scrypt` is not pre-installed on every GNU/Linux system, it is strongly recommended that you store a copy of it with your backups. If your distribution has `scrypt` packaged (e.g., Debian), you can install the package in the standard way using your distribution's package manager. Otherwise, you'll need to obtain a compiled binary (instructions below) or compile the program from source yourself. (Don't forget to [verify signatures] first!) Note that versions of `scrypt` up to 1.2.0 (inclusive) do not support the `-P` option for easier scripting, which means you'll need to enter the passphrase for each file separately, instead of using `echo ... | scrypt`. Here are instructions for obtaining a compiled `scrypt` binary. This example uses an RPM-based system (Fedora), but the same general procedure should work on any GNU/Linux system. 1. If you're not on Qubes 4.X, [get and verify the Release 4 Signing Key]. 2. If you're not on Qubes 4.X, import the Release 4 Signing Key: [user@restore ~]$ sudo rpm --import qubes-release-4-signing-key.asc 3. Download the `scrypt` RPM: [user@restore ~]$ dnf download scrypt or, if that doesn't work: [user@restore ~]$ curl -O https://yum.qubes-os.org/r4.0/current/vm/fc28/rpm/scrypt-1.2.1-1.fc28.x86_64.rpm 4. Verify the signature on the `scrypt` RPM: [user@restore ~]$ rpm -K scrypt-*.rpm scrypt-*.rpm: digests signatures OK The message `digests signatures OK` means that both the digest (i.e., the output of a hash function) and PGP signature verification were successful. 5. Install `rpmdevtools`: [user@restore ~]$ sudo dnf install rpmdevtools 6. Extract the `scrypt` binary from the RPM: [user@restore ~]$ rpmdev-extract scrypt-*.rpm 7. (Optional) Create an alias for the new binary: [user@restore ~]$ alias scrypt="scrypt-*/usr/bin/scrypt" Emergency Recovery Instructions ------------------------------- **Note:** In the following example, the backup file is both *encrypted* and *compressed*. 1. Untar the main backup file. [user@restore ~]$ tar -i -xvf qubes-backup-2015-06-05T123456 backup-header backup-header.hmac qubes.xml.000.enc vm1/private.img.000.enc vm1/private.img.001.enc vm1/private.img.002.enc vm1/icon.png.000.enc vm1/firewall.xml.000.enc vm1/whitelisted-appmenus.list.000.enc dom0-home/dom0user.000.enc **Note:** Each VM in the backup file has its path listed in `qubes.xml.000.enc` (search for the `backup-path` property). You can extract only the files necessary for your VM (`vmX`) with `tar -i -xvf qubes-backup-2015-06-05T123456 backup-header backup-header.hmac vmX/`. 2. Set the backup passhprase environment variable. While this isn't strictly required, it will be handy later and will avoid saving the passphrase in the shell's history. [user@restore ~]$ read backup_pass 3. Verify the integrity of `backup-header`. For compatibility reasons, `backup-header.hmac` is an encrypted *and integrity protected* version of `backup-header`. [user@restore ~]$ set +H [user@restore ~]$ echo "backup-header!$backup_pass" |\ scrypt dec -P backup-header.hmac backup-header.verified && \ diff -qs backup-header backup-header.verified Files backup-header and backup-header.verified are identical **Note:** If this command fails, it may be that the backup was tampered with or is in a different format. In the latter case, look inside `backup-header` at the `version` field. If it contains a value other than `version=4`, go to the instructions for that format version: - [Emergency Backup Recovery without Qubes (v2)] - [Emergency Backup Recovery without Qubes (v3)] 4. Read `backup-header`: [user@restore ~]$ cat backup-header version=4 encrypted=True compressed=True compression-filter=gzip backup_id=20161020T123455-1234 5. Set `backup_id` to the value in the last line of `backup-header`: [user@restore ~]$ backup_id=20161020T123455-1234 6. Verify the integrity of and decrypt the `private.img` file that houses your data. [user@restore ~]$ for f_enc in vm1/private.img.???.enc; do \ f_dec=${f_enc%.enc}; \ echo "$backup_id!$f_dec!$backup_pass" | scrypt dec -P $f_enc $f_dec || break; \ done **Note:** If this command fails, it is likely that the backup is corrupted or has been tampered with. 7. Decompress and untar the decrypted `private.img` file. [user@restore ~]$ cat vm1/private.img.??? | gzip -d | tar -xv vm1/private.img **Note:** If your backup was compressed with a program other than `gzip`, you must substitute the correct compression program. This information is contained in `backup-header` (see step 4). For example, if you used `bzip2`, then you should do this: [user@restore vm1]$ mv private.img.dec private.img.dec.bz2 [user@restore vm1]$ bunzip2 private.img.dec.bz2 8. Mount `private.img` and access your data. [user@restore vm1]$ sudo mkdir /mnt/img [user@restore vm1]$ sudo mount -o loop vm1/private.img /mnt/img/ [user@restore vm1]$ cat /mnt/img/home/user/your_data.txt This data has been successfully recovered! 9. Success! If you wish to recover data from more than one VM in your backup, simply repeat steps 6--8 for each additional VM. **Note:** You may wish to store a copy of these instructions with your Qubes backups in the event that you fail to recall the above procedure while this web page is inaccessible. All Qubes documentation, including this page, is available in plain text format in the following Git repository: https://github.com/QubesOS/qubes-doc.git [scrypt]: https://www.tarsnap.com/scrypt.html [verify signatures]: https://www.qubes-os.org/security/verifying-signatures [get and verify the Release 4 Signing Key]: https://www.qubes-os.org/security/verifying-signatures/#2-get-the-release-signing-key [Emergency Backup Recovery without Qubes (v2)]: https://www.qubes-os.org/doc/backup-emergency-restore-v2/ [Emergency Backup Recovery without Qubes (v3)]: https://www.qubes-os.org/doc/backup-emergency-restore-v3/