Git-Mirrors/qubes-doc
1
0
Fork 0
mirror of https://github.com/QubesOS/qubes-doc.git synced 2024-10-01 01:25:40 -04:00
Code Issues Packages Projects Releases Wiki Activity

disk-trim 4.0 updates

Browse Source 
add introduction
relocate some existing content to introduction
add generic content
add 4.0 and 3.2.1 content
update 3.2 content
remove reference to WONTFIX bug
This commit is contained in:
awokd 2018-02-06 08:08:07 +00:00 committed by GitHub
parent 6f98eb4083
commit f74759eede
No known key found for this signature in database
GPG Key ID: 4AEE18F83AFDEB23
1 changed files with 74 additions and 10 deletions
Show Stats Download Patch File Download Diff File Expand all files Collapse all files

80
configuration/disk-trim.md
View File

@ -8,7 +8,70 @@ redirect_from:
- /wiki/DiskTRIM/
---
VMs have already TRIM enabled by default, but dom0 doesn't. There are some security implications (read for example [this article](https://asalor.blogspot.com/2011/08/trim-dm-crypt-problems.html)), but IMO not very serious.
Disk Trim
----------
Disk trimming is the procedure by which the operating system informs the underlying storage device of which storage blocks are no longer in use.
It does this by issuing an `ATA_TRIM` command for the block. This is also known as a `discard`.
In this way, the storage device can perform garbage collection of the unused blocks and internally prepare them for reuse. SSDs in general benefit from this, while HDDs do not.
In a Linux system running on bare metal, this is relatively straight-forward.
When instructed by the operating system, discards are issued by the file-system driver directly to the storage driver and then to the SSD.
In Qubes, this gets more complex due to virtualization, LUKS, and LVM (and thin pools on R4.0 and up).
If you run `fstrim --all` inside a TemplateVM, the `discard` can follow a path like:
OS -> File-system Driver -> Virtual Storage Driver -> Backend Storage Driver -> LVM Storage Driver -> LUKS Driver -> Physical Storage Driver -> Physical Storage Device
If discards are not supported at any one of those layers, it will not make it to the underlying physical device.
There are some security implications to permitting TRIM (read for example [this article](https://asalor.blogspot.com/2011/08/trim-dm-crypt-problems.html)), but in most cases not exploitable.
Configuration
----------
In all versions of Qubes, you may want to set up a periodic job in `dom0` to trim the disk.
This can be done from a terminal as root, by creating a `trim` file in `/etc/cron.daily` (or `/etc/cron.weekly`).
Add the following contents:
```
#!/bin/bash
/sbin/fstrim --all
```
And mark it as executable with `chmod 755 /etc/cron.daily/trim`.
**Note** Although discards can be issued on every delete by adding the `discard` mount option to `/etc/fstab`, this option can hurt performance so the above procedure is recommended instead.
If you are using Qubes with LVM, you may also want to set `issue_discards = 1` in `/etc/lvm/lvm.conf`.
Setting this option will permit LVM to issue discards to the SSD when logical volumes are shrunk or deleted.
This is relatively rare in R3.x, but more frequent in R4.x with disposable VMs.
To verify if discards are enabled you may use `dmsetup table` (confirm the line for your device mentions "discards") or just run `fstrim -av` (you should see a number of bytes trimmed).
See also version specific notes below.
R4.0
----------
TRIM support is enabled by default at all layers, including LUKS.
LVM Logical volumes are frequently deleted (every time a disposable VM is shut down, for example) so setting `issue_discards = 1` in `/etc/lvm/lvm.conf` is recommended if using an SSD.
R3.2.1
----------
TRIM support is enabled by default at all layers, including LUKS.
R3.2
----------
VMs have already TRIM enabled by default, but dom0 doesn't.
To enable TRIM in dom0 you need:
@ -21,18 +84,19 @@ To enable TRIM in dom0 you need:
2. Add entry to `/etc/crypttab` (replace luks-\<UUID\> with the device name and the \<UUID\> with UUID alone):
~~~
luks-<UUID> UUID=<UUID> none allow-discards
luks-<UUID> UUID=<UUID> none discard
~~~
3. Add `rd.luks.allow-discards=1` to kernel cmdline (`/etc/default/grub`, GRUB\_CMDLINE\_LINUX line)
4. Rebuild grub config (`grub2-mkconfig -o /boot/grub2/grub.cfg`)
5. Rebuild initrd **in hostonly mode**:
3. Add `rd.luks.options=discard` to kernel cmdline (follow either GRUB2 or EFI, not both):
* GRUB2: `/etc/default/grub`, `GRUB_CMDLINE_LINUX` line and
Rebuild grub config (`grub2-mkconfig -o /boot/grub2/grub.cfg`)
* EFI: `/boot/efi/EFI/qubes/xen.cfg`, `kernel=` line(s)
4. Rebuild initrd **in hostonly mode**:
~~~
dracut -H -f
~~~
6. Add "discard" option to `/etc/fstab` for root device
7. Reboot the system, verify that allow-discards is really enabled (`dmsetup table`)
5. Reboot the system and verify that discards are really enabled.
There is a [bug affecting allow-discards option](https://bugzilla.redhat.com/show_bug.cgi?id=890533), once it will be fixed, first two steps will be no longer needed.