From d3c8a82d12bd38f41d24a308f8b03768d7822dda Mon Sep 17 00:00:00 2001 From: xn0px90 Date: Wed, 14 Nov 2018 16:28:16 -0500 Subject: [PATCH] upgrade-28-to-29 --- .../templates/fedora/upgrade-28-to-29.md | 390 ++++++++++++++++++ 1 file changed, 390 insertions(+) create mode 100644 managing-os/templates/fedora/upgrade-28-to-29.md diff --git a/managing-os/templates/fedora/upgrade-28-to-29.md b/managing-os/templates/fedora/upgrade-28-to-29.md new file mode 100644 index 00000000..bec5dff8 --- /dev/null +++ b/managing-os/templates/fedora/upgrade-28-to-29.md @@ -0,0 +1,390 @@ +--- +layout: doc +title: Upgrading the Fedora 28 Template to Fedora 29 +permalink: /doc/template/fedora/upgrade-28-to-29/ +redirect_from: +- /doc/fedora-template-upgrade-28/ +- /en/doc/fedora-template-upgrade-28/ +- /doc/FedoraTemplateUpgrade28/ +- /wiki/FedoraTemplateUpgrade28/ +--- + +Upgrading the Fedora 28 Template to Fedora 29 +============================================= + +This page provides instructions for performing an in-place upgrade of an +installed Fedora 28 [TemplateVM] to Fedora 29. If you wish to install a new, +unmodified Fedora 29 template instead of upgrading a template that is already +installed in your system, please see the [Fedora TemplateVM] page instead. + +These instructions can also be used to upgrade a Fedora 26 TemplateVM to +Fedora 29. Simply start by cloning `fedora-26` instead of `fedora-28` in the +instructions below. + + +Important information regarding RPM Fusion repos +------------------------------------------------ + +If your RPM Fusion repositories are **disabled** when you upgrade a TemplateVM from Fedora 28 to 29, all RPM Fusion packages and RPM Fusion repo definitions will be removed from that TemplateVM. +If your RPM Fusion repositories are **enabled** when upgrading, all RPM Fusion packages and repo definitions will be retained and updated as expected. +For most users, this behavior should not cause a problem, since a TemplateVM in which the RPM Fusion repos are disabled is probably a TemplateVM in which you never wish to use them. +However, if you wish to have the RPM Fusion repo definitions after upgrading in a TemplateVM in which they are currently disabled, you may wish to temporarily enable them prior to upgrading or manually create, copy, or download them after upgrading. + + +Workaround for `python2-xcffib` upgrade error +--------------------------------------------- + +When attempting to upgrade from Fedora 26 or 28 to Fedora 29, you may encounter an error similar to this: + + Error: Transaction check error: + file /usr/lib/python2.7/site-packages/xcffib-0.5.1-py2.7.egg-info/PKG-INFO from install of python2-xcffib-0.5.1-5.fc29.noarch conflicts with file from package python-xcffib-0.5.1-1.fc26.noarch + file /usr/lib/python2.7/site-packages/xcffib/_ffi.pyc from install of python2-xcffib-0.5.1-5.fc29.noarch conflicts with file from package python-xcffib-0.5.1-1.fc26.noarch + file /usr/lib/python2.7/site-packages/xcffib/_ffi.pyo from install of python2-xcffib-0.5.1-5.fc29.noarch conflicts with file from package python-xcffib-0.5.1-1.fc26.noarch + file /usr/lib/python2.7/site-packages/xcffib/xinput.pyc from install of python2-xcffib-0.5.1-5.fc29.noarch conflicts with file from package python-xcffib-0.5.1-1.fc26.noarch + file /usr/lib/python2.7/site-packages/xcffib/xinput.pyo from install of python2-xcffib-0.5.1-5.fc29.noarch conflicts with file from package python-xcffib-0.5.1-1.fc26.noarch + +To work around this error: + +1. Upgrade while excluding the problematic packages by using `-x python2-xcffib -x qubes-gui-vm -x qubes-gui-agent`. +2. Upgrade `python2-xcffib` using `sudo dnf swap python-xcffib python2-xcffib`. + (This should automatically upgrade the other excluded packages too.) + + +Qubes 3.2 Instructions +---------------------- + +### Summary: Upgrading the Standard Fedora 28 Template to Fedora 29 ### + +**Note:** The prompt on each line indicates where each command should be entered +(`@dom0` or `@fedora-29`). + + [user@dom0 ~]$ qvm-clone fedora-28 fedora-29 + [user@dom0 ~]$ truncate -s 5GB /var/tmp/template-upgrade-cache.img + [user@dom0 ~]$ qvm-run -a fedora-29 gnome-terminal + [user@dom0 ~]$ qvm-block -A fedora-29 dom0:/var/tmp/template-upgrade-cache.img + [user@fedora-29 ~]$ sudo mkfs.ext4 /dev/xvdi + [user@fedora-29 ~]$ sudo mount /dev/xvdi /mnt/removable + [user@fedora-29 ~]$ sudo dnf clean all + [user@fedora-29 ~]$ sudo dnf --releasever=29 --setopt=cachedir=/mnt/removable --best --allowerasing -x python2-tornado distro-sync + + (Shut down TemplateVM by any normal means.) + + [user@dom0 ~]$ rm /var/tmp/template-upgrade-cache.img + [user@dom0 ~]$ qvm-trim-template fedora-29 + +(Optional cleanup: Switch everything over to the new template and delete the old +one. See instructions below for details.) + + +### Detailed: Upgrading the Standard Fedora 28 Template to Fedora 29 ### + +These instructions will show you how to upgrade the standard Fedora 28 +TemplateVM to Fedora 29. The same general procedure may be used to upgrade any +template based on the standard Fedora 28 template. + +**Note:** The command-line prompt on each line indicates where each command +should be entered (`@dom0` or `@fedora-29`). + + 1. Ensure the existing template is not running. + + [user@dom0 ~]$ qvm-shutdown fedora-28 + + 2. Clone the existing template and start a terminal in the new template. + + [user@dom0 ~]$ qvm-clone fedora-28 fedora-29 + [user@dom0 ~]$ qvm-run -a fedora-29 gnome-terminal + + 3. Attempt the upgrade process in the new template. + + [user@fedora-29 ~]$ sudo dnf clean all + [user@fedora-29 ~]$ sudo dnf --releasever=29 distro-sync --best --allowerasing + + **Note:** `dnf` might ask you to approve importing a new package signing + key. For example, you might see a prompt like this one: + + warning: /mnt/removable/updates-0b4cc238d1aa4ffe/packages/kernel-4.18.17-300.fc29.x86_64.rpm: Header V3 RSA/SHA256 Signature, key ID 429476b4: NOKEY + Importing GPG key 0x429476B4: + Userid : "Fedora 29 (29) " + Fingerprint: 5A03 B4DD 8254 ECA0 2FDA 1637 A20A A56B 4294 76B4 + From : /etc/pki/rpm-gpg/RPM-GPG-KEY-fedora-29-x86_64 + Is this ok [y/N]: y + + + This key was already checked when it was installed (notice that the "From" + line refers to a location on your local disk), so you can safely say yes to + this prompt. + + **Note:** If you encounter no errors, proceed to step 4. If you do encounter + errors, see the next two points first. + + * If `dnf` reports that you do not have enough free disk space to proceed + with the upgrade process, create an empty file in dom0 to use as a cache + and attach it to the template as a virtual disk. + + [user@dom0 ~]$ truncate -s 5GB /var/tmp/template-upgrade-cache.img + [user@dom0 ~]$ qvm-block -A fedora-29 dom0:/var/tmp/template-upgrade-cache.img + + Then reattempt the upgrade process, but this time use the virtual disk + as a cache. + + [user@fedora-29 ~]$ sudo mkfs.ext4 /dev/xvdi + [user@fedora-29 ~]$ sudo mount /dev/xvdi /mnt/removable + [user@fedora-29 ~]$ sudo dnf clean all + [user@fedora-29 ~]$ sudo dnf --releasever=29 --setopt=cachedir=/mnt/removable --best --allowerasing distro-sync + + If this attempt is successful, proceed to step 4. + + * `dnf` may complain: + + At least X MB more space needed on the / filesystem. + + In this case, one option is to [resize the TemplateVM's disk + image][resize-disk-image] before reattempting the upgrade process. + (See [Additional Information] below for other options.) + + 4. Check that you are on the correct (new) fedora release. + + [user@fedora-29 ~]$ cat /etc/fedora-release + + 5. Shut down the new TemplateVM (from the command-line or Qubes VM Manager). + + [user@dom0 ~]$ qvm-shutdown fedora-29 + + 6. Remove the cache file, if you created one. + + [user@dom0 ~]$ rm /var/tmp/template-upgrade-cache.img + + 7. Trim the new template (see [Compacting the Upgraded Template] for details + and other options). + + [user@dom0 ~]$ qvm-trim-template fedora-29 + + 8. (Recommended) [Switch everything that was set to the old template to the new + template.][switching-3.2] + + 9. (Optional) Remove the old template. (Make sure to type `fedora-28`, not + `fedora-29`.) + + [user@dom0 ~]$ sudo dnf remove qubes-template-fedora-28 + + +### Compacting the Upgraded Template ### + +Neither `fstrim` nor the `discard` mount option works on the TemplateVM's root +filesystem, so when a file is removed in the template, space is not freed in +dom0. This means that the template will use about twice as much space as is +really necessary after upgrading. + +You can use the `qvm-trim-template` tool: + + [user@dom0 ~]$ qvm-trim-template fedora-29 + + +### Upgrading StandaloneVMs ### + +The procedure for upgrading a StandaloneVM from Fedora 28 to Fedora 29 is the +same as for a TemplateVM, except that `qvm-trim-template` does not work on +StandaloneVMs. Instead, you should run the following command inside the +StandaloneVM in order to compact it: + + $ sudo fstrim -v -a + + +### Summary: Upgrading the Minimal Fedora 28 Template to Fedora 29 ### + +**Note:** The prompt on each line indicates where each command should be entered +(`@dom0` or `@fedora-29`). + + [user@dom0 ~]$ qvm-clone fedora-28-minimal fedora-29-minimal + [user@dom0 ~]$ qvm-run -u root -a fedora-29-minimal xterm + [root@fedora-29-minimal ~]# dnf clean all + [user@fedora-29-minimal ~]# dnf --releasever=29 --best --allowerasing distro-sync + + (Shut down TemplateVM by any normal means.) + + [user@dom0 ~]$ qvm-trim-template fedora-29-minimal + +(If you encounter insufficient space issues, you may need to use the methods +described for the standard template above.) + + +Qubes 4.0 Instructions +---------------------- + +### Summary: Upgrading the Standard Fedora 28 Template to Fedora 29 ### + +**Note:** The prompt on each line indicates where each command should be entered +(`@dom0` or `@fedora-29`). + + [user@dom0 ~]$ qvm-clone fedora-28 fedora-29 + [user@dom0 ~]$ truncate -s 5GB /var/tmp/template-upgrade-cache.img + [user@dom0 ~]$ qvm-run -a fedora-29 gnome-terminal + [user@dom0 ~]$ dev=$(sudo losetup -f --show /var/tmp/template-upgrade-cache.img) + [user@dom0 ~]$ qvm-block attach fedora-29 dom0:${dev##*/} + [user@fedora-29 ~]$ sudo mkfs.ext4 /dev/xvdi + [user@fedora-29 ~]$ sudo mount /dev/xvdi /mnt/removable + [user@fedora-29 ~]$ sudo dnf clean all + [user@fedora-29 ~]$ sudo dnf --releasever=29 --setopt=cachedir=/mnt/removable --best --allowerasing distro-sync + [user@fedora-29 ~]$ sudo fstrim -v / + + (Shut down TemplateVM by any normal means.) + + [user@dom0 ~]$ sudo losetup -d $dev + [user@dom0 ~]$ rm /var/tmp/template-upgrade-cache.img + +(Optional cleanup: Switch everything over to the new template and delete the old +one. See instructions below for details.) + + +### Detailed: Upgrading the Standard Fedora 28 Template to Fedora 29 ### + +These instructions will show you how to upgrade the standard Fedora 28 +TemplateVM to Fedora 29. The same general procedure may be used to upgrade any +template based on the standard Fedora 28 template. + +**Note:** The command-line prompt on each line indicates where each command +should be entered (`@dom0` or `@fedora-29`). + + 1. Ensure the existing template is not running. + + [user@dom0 ~]$ qvm-shutdown fedora-28 + + 2. Clone the existing template and start a terminal in the new template. + + [user@dom0 ~]$ qvm-clone fedora-28 fedora-29 + [user@dom0 ~]$ qvm-run -a fedora-29 gnome-terminal + + 3. Attempt the upgrade process in the new template. + + [user@fedora-29 ~]$ sudo dnf clean all + [user@fedora-29 ~]$ sudo dnf --releasever=29 distro-sync --best --allowerasing + + **Note:** `dnf` might ask you to approve importing a new package signing + key. For example, you might see a prompt like this one: + + warning: /mnt/removable/updates-0b4cc238d1aa4ffe/packages/kernel-4.18.17-300.fc29.x86_64.rpm: Header V3 RSA/SHA256 Signature, key ID 429476b4: NOKEY + Importing GPG key 0x429476B4: + Userid : "Fedora 29 (29) " + Fingerprint: 5A03 B4DD 8254 ECA0 2FDA 1637 A20A A56B 4294 76B4 + From : /etc/pki/rpm-gpg/RPM-GPG-KEY-fedora-29-x86_64 + Is this ok [y/N]: y + + This key was already checked when it was installed (notice that the "From" + line refers to a location on your local disk), so you can safely say yes to + this prompt. + + **Note:** If you encounter no errors, proceed to step 4. If you do encounter + errors, see the next two points first. + + * If `dnf` reports that you do not have enough free disk space to proceed + with the upgrade process, create an empty file in dom0 to use as a cache + and attach it to the template as a virtual disk. + + [user@dom0 ~]$ truncate -s 5GB /var/tmp/template-upgrade-cache.img + [user@dom0 ~]$ dev=$(sudo losetup -f --show /var/tmp/template-upgrade-cache.img) + [user@dom0 ~]$ qvm-block attach fedora-29 dom0:${dev##*/} + + Then reattempt the upgrade process, but this time use the virtual disk + as a cache. + + [user@fedora-29 ~]$ sudo mkfs.ext4 /dev/xvdi + [user@fedora-29 ~]$ sudo mount /dev/xvdi /mnt/removable + [user@fedora-29 ~]$ sudo dnf clean all + [user@fedora-29 ~]$ sudo dnf --releasever=29 --setopt=cachedir=/mnt/removable --best --allowerasing distro-sync + + If this attempt is successful, proceed to step 4. + + * `dnf` may complain: + + At least X MB more space needed on the / filesystem. + + In this case, one option is to [resize the TemplateVM's disk + image][resize-disk-image] before reattempting the upgrade process. + (See [Additional Information] below for other options.) + + 4. Check that you are on the correct (new) fedora release. + + [user@fedora-29 ~]$ cat /etc/fedora-release + + 5. Trim the new template. + + [user@fedora-29 ~]$ sudo fstrim -v / + + 6. Shut down the new TemplateVM (from the command-line or Qubes VM Manager). + + [user@dom0 ~]$ qvm-shutdown fedora-29 + + 7. Remove the cache file, if you created one. + + [user@dom0 ~]$ sudo losetup -d $dev + [user@dom0 ~]$ rm /var/tmp/template-upgrade-cache.img + + 8. (Recommended) [Switch everything that was set to the old template to the new + template.][switching-4.0] + + 9. (Optional) Remove the old template. (Make sure to type `fedora-28`, not + `fedora-29`.) + + [user@dom0 ~]$ sudo dnf remove qubes-template-fedora-28 + + +### Upgrading StandaloneVMs ### + +The procedure for upgrading a StandaloneVM from Fedora 28 to Fedora 29 is the +same as for a TemplateVM. + + +### Summary: Upgrading the Minimal Fedora 28 Template to Fedora 29 ### + +**Note:** The prompt on each line indicates where each command should be entered +(`@dom0` or `@fedora-29`). + + [user@dom0 ~]$ qvm-clone fedora-28-minimal fedora-29-minimal + [user@dom0 ~]$ qvm-run -u root -a fedora-29-minimal xterm + [root@fedora-29-minimal ~]# dnf clean all + [user@fedora-29-minimal ~]# dnf --releasever=29 --best --allowerasing distro-sync + [user@fedora-29-minimal ~]# fstrim -v / + + (Shut down TemplateVM by any normal means.) + +(If you encounter insufficient space issues, you may need to use the methods +described for the standard template above.) + + +Additional Information +---------------------- + +As mentioned above, you may encounter the following `dnf` error: + + At least X MB more space needed on the / filesystem. + +In this case, you have several options: + + 1. [Increase the TemplateVM's disk image size][resize-disk-image]. + This is the solution mentioned in the main instructions above. + 2. Delete files in order to free up space. One way to do this is by + uninstalling packages. You may then reinstalling them again after you + finish the upgrade process, if desired). However, you may end up having to + increase the disk image size anyway (see previous option). + 3. Do the upgrade in parts, e.g., by using package groups. (First upgrade + `@core` packages, then the rest.) + 4. Do not perform an in-place upgrade. Instead, simply download and install a + new template package, then redo all desired template modifications. + + With regard to the last option, here are some useful messages from the + mailing list which also apply to TemplateVM management and migration in + general: + + * [Marek](https://groups.google.com/d/msg/qubes-users/mCXkxlACILQ/dS1jbLRP9n8J) + * [Jason M](https://groups.google.com/d/msg/qubes-users/mCXkxlACILQ/5PxDfI-RKAsJ) + + +[TemplateVM]: /doc/templates/ +[Fedora TemplateVM]: /doc/templates/fedora/ +[resize-disk-image]: /doc/resize-disk-image/ +[Additional Information]: #additional-information +[Compacting the Upgraded Template]: #compacting-the-upgraded-template +[switching-3.2]: /doc/templates/#how-to-switch-templates-32 +[switching-4.0]: /doc/templates/#how-to-switch-templates-40 +[DispVM]: /doc/dispvm/ +