Fix links

This commit is contained in:
Enjeck Cleopatra 2020-10-05 14:38:17 +01:00 committed by GitHub
parent afc2c29146
commit bd5ff1e36b
No known key found for this signature in database
GPG Key ID: 4AEE18F83AFDEB23

View File

@ -32,7 +32,7 @@ If you have an Nvidia card, see also [Nvidia Troubleshooting](/doc/nvidia-troubl
Some systems can freeze with the default UEFI install options.
You can try the following to remove `noexitboot` and `mapbs`.
1. Follow the [steps here](/doc/uefi-troubleshooting/#change-installer-kernel-parameters-in-uefi) to edit the `[qubes-verbose]` section of your installer's `BOOTX64.cfg`.
1. Follow the [steps here](/doc/uefi-troubleshooting/#successfully-installed-in-legacy-mode-but-had-to-change-some-kernel-parameters) to edit the `[qubes-verbose]` section of your installer's `BOOTX64.cfg`.
You want to comment out the `mapbs` and `noexitboot` lines.
The end result should look like this:
@ -63,7 +63,7 @@ This is also a good time to make permanent any other changes needed to get the i
If removing `noexitboot` and `mapbs` did not help, you can try changing the `options=console=` parameter to `none`. The detailed solution can be found in the comments of [this GitHub issue](https://github.com/QubesOS/qubes-issues/issues/5383)
1. Follow the [steps here](/doc/uefi-troubleshooting/#change-installer-kernel-parameters-in-uefi) to edit the `[qubes-verbose]` section of your installer's `BOOTX64.cfg`.
1. Follow the [steps here](/doc/uefi-troubleshooting/#successfully-installed-in-legacy-mode-but-had-to-change-some-kernel-parameters) to edit the `[qubes-verbose]` section of your installer's `BOOTX64.cfg`.
You want to change `options=console=vga` to `options=console=none`.
The end result should look like this:
@ -85,7 +85,7 @@ This can sometimes be done by switching to legacy mode in your BIOS/UEFI configu
If that's not an option there, or legacy mode does not work either, you can try the following to add `efi=no-rs`.
Consider this approach as a last resort, because it will make every Xen update a manual process.
1. Follow the [steps here](/doc/uefi-troubleshooting/#change-installer-kernel-parameters-in-uefi) to edit the `[qubes-verbose]` section of your installer's `xen.cfg`.
1. Follow the [steps here](/doc/uefi-troubleshooting/#successfully-installed-in-legacy-mode-but-had-to-change-some-kernel-parameters) to edit the `[qubes-verbose]` section of your installer's `xen.cfg`.
You want to modify the `efi=attr=uc` setting and comment out the `mapbs` and `noexitboot` lines.
The end result should look like this: