Git-Mirrors/qubes-doc
1
0
Fork 0
mirror of https://github.com/QubesOS/qubes-doc.git synced 2024-12-29 09:16:22 -05:00
Code Issues Packages Projects Releases Wiki Activity

add efi=no-rs section

Browse Source
This commit is contained in:
awokd 2018-04-02 07:05:28 +00:00 committed by GitHub
parent da9a1b593f
commit 9319d000e2
No known key found for this signature in database
GPG Key ID: 4AEE18F83AFDEB23
1 changed files with 37 additions and 0 deletions
Show Stats Download Patch File Download Diff File Expand all files Collapse all files

37
troubleshooting/uefi-troubleshooting.md
View File

@ -143,3 +143,40 @@ Ctrl-Alt-F2), or booting from installation media in "Rescue a Qubes system" mode
efibootmgr -v -c -u -L Qubes -l /EFI/qubes/xen.efi -d /dev/sda -p 1 "placeholder /mapbs /noexitboot"
Installation freezes before getting to Anaconda
-----------------------------------------------
On some early, buggy UEFI implementations, you may need to disable EFI under Qubes completely.
This can sometimes be done by switching to legacy mode in your BIOS/UEFI configuration.
If that's not an option there, or legacy mode does not work either, you can try the following to add `efi=no-rs`.
1. Follow the [steps above](/doc/uefi-troubleshooting/#change-installer-kernel-parameters-in-uefi) to edit the `[qubes-verbose]` section of your installer's `xen.cfg`.
You want to modify the `efi=attr=uc` setting and comment out the `mapbs` and `noexitboot` lines.
The end result should look like this:
~~~
[qubes-verbose]
options=console=vga efi=no-rs
# noexitboot=1
# mapbs=1
kernel=vmlinuz inst.stage2=hd:LABEL=Qubes-R4.0-x86_64 i915.alpha_support=1
ramdisk=initrd.img
~~~
2. Boot the installer and continue to install as normal, until towards the end when you will receive a warning about being unable to create the EFI boot entry.
Click continue, but don't reboot the system at the end when prompted.
3. Go to `tty2` (Ctrl-Alt-F2).
4. Use your preferred text editor (`nano` works) to edit `/mnt/sysimage/boot/efi/EFI/qubes/xen.cfg`, adding the `efi=no-rs` option to the end of the `options=` line.
For example:
~~~
[4.14.18-1.pvops.qubes.x86_64]
options=loglvl=all dom0_mem=min:1024M dom0_mem=max:4096M iommu=no-igfx ucode=scan efi=no-rs
~~~
5. Execute the following commands:
~~~
cp -R /mnt/sysimage/boot/efi/EFI/qubes /mnt/sysimage/boot/efi/EFI/BOOT
mv /mnt/sysimage/boot/efi/EFI/BOOT/xen.efi /mnt/sysimage/boot/efi/EFI/BOOT/BOOTX64.efi
mv /mnt/sysimage/boot/efi/EFI/BOOT/xen.cfg /mnt/sysimage/boot/efi/EFI/BOOT/BOOTX64.cfg
~~~
6. Go back to `tty6` (Ctrl-Alt-F6) and click `Reboot`.
7. Continue with setting up default templates and logging in to Qubes.
Whenever there is a kernel or Xen update for Qubes, you will need to follow these [other steps above](/doc/uefi-troubleshooting/#boot-device-not-recognized-after-installing) because your system is using the fallback UEFI bootloader in `[...]/EFI/BOOT` instead of directly booting to the Qubes entry under `[...]/EFI/qubes`.