As of Qubes R2B3, these functions are integrated into the Qubes VM Manager GUI. There are also two command-line tools available which perform the same functions: [qvm-backup](/wiki/Dom0Tools/QvmBackup) and [qvm-backup-restore](/wiki/Dom0Tools/QvmBackupRestore).
1. In **Qubes VM Manager**, click **System** on the menu bar, then click **Backup VMs** in the dropdown list. This brings up the **Qubes Backup VMs** window.
1. Move the AppVMs which you desire to back up to the right-hand **Selected** column. AppVMs in the left-hand **Available** column will not be backed up.
> You must also specify a directory on the device or in the AppVM as a destination for your backup. For example, if you wish to send your backup to a the `~/backups` folder in the target AppVM, you would simply type `backups` in this field. This destination directory must already exist. If it does not exist, you must create it manually prior to backing up.
> **Note:** The supplied passphrase is used for **both** encryption/decryption and integrity verification. If you decide not to encrypt your backup (by unchecking the **Encrypt backup** box), the passphrase you supply will be used **only** for integrity verification. If you supply a passphrase but do not check the **Encrypt backup** box, your backup will **not** be encrypted!
1. In **Qubes VM Manager**, click **System** on the menu bar, then click **Restore VMs from backup** in the dropdown list. This brings up the **Qubes Restore VMs** window.
> You must also specify the directory in which the backup resides. If you followed the instructions in the previous section, "Creating a Backup," then your backup is most likely in the location you chose as the destination in step 3. For example, if you had chosen the `~/backups` directory of an AppVM as your destination in step 3, you would now select the same AppVM and again type `backups` into the **Backup directory** field.
> **Note:** After you have typed the directory location of the backup in the **Backup directory** field, click the ellipsis button `...` to the right of the field.
1. There are three options you may select when restoring from a backup:
1.**ignore missing**: If any of the AppVMs in your backup depended upon a NetVM, ProxyVM, or TemplateVM which is not present in (i.e., "missing from") the current system, checking this box will ignore the fact that they are missing and restore the AppVMs anyway.
2.**ignore username mismatch**: This option applies only to the restoration of dom0's home directory. If your backup was created on a Qubes system which had a different dom0 username than the dom0 username of the current system, then checking this box will ignore the mismatch between the two usernames and proceed to restore the home directory anyway.
3.**skip dom0**: If this box is checked, dom0's home directory will not be restored from your backup.
1. If your backup is encrypted, you must check the **Encrypted backup** box. If a passphrase was supplied during the creation of your backup (regardless of whether it is encrypted), then you must supply it here.
> **Note:** The passphrase which was supplied when the backup was created was used for **both** encryption/decryption and integrity verification. If the backup was not encrypted, the supplied passphrase is used only for integrity verification.
> **Note:** An AppVM cannot be restored from a backup if an AppVM with the same name already exists on the current system. You must first remove or change the name of any AppVM with the same name in order to restore such an AppVM.
1. When you are ready, click **Next**. Qubes will proceed to restore from your backup. Once the progress bar has completed, you may click **Finish**.
Emergency Backup Recovery without Qubes
---------------------------------------
The Qubes backup system was been designed with emergency disaster recovery in mind. No special Qubes-specific tools are required to access data backed up by Qubes. In the event a Qubes system is unavailable, you can access your data on any GNU/Linux system with the following procedure.
1. Untar the main backup file.
``` {.wiki}
[user@restore ~]$ cd backups
[user@restore backups]$ tar -i -xvf qubes-backup-2013-12-26-123456
qubes.xml.000
qubes.xml.000.hmac
vm1/private.img.000
vm1/private.img.000.hmac
vm1/icon.png.000
vm1/icon.png.000.hmac
vm1/firewall.xml.000
vm1/firewall.xml.000.hmac
vm1/whitelisted-appmenus.list.000
vm1/whitelisted-appmenus.list.000.hmac
dom0-home/dom0user.000
dom0-home/dom0user.000.hmac
```
1. Verify the integrity of the `private.img` file which houses your data.
> **Note:** The hash values should match. If they do not match, then the backup file may have been tampered with, or there may have been a storage error.
> **Note:** If your backup was encrypted with a cipher other than `aes-256-cbc`, you must replace it with the correct cipher command. Available ciphers commands can be found with `openssl --help`.
1. Untar the decrypted `private.img` file.
``` {.wiki}
[user@restore vm1]$ tar -M -xvf private.img.dec.000
vm1/private.img
```
**Note:** For multi-part files, a script is required:
1. Create a `new-volume-script`:
``` {.wiki}
#!/bin/sh
name=`expr $TAR_ARCHIVE : '\(.*\)\..*'`
suffix=`printf %03d $[ $TAR_VOLUME - 1 ]`
echo $name.$suffix >&$TAR_FD
```
2.`chmod +x new-volume-script`.
3.`tar --new-volume-script=./new-volume-script -xvf private.img.dec.000`. (The `--new-volume-script` option enables multi-volume untaring.)
1. Mount the private.img file and access your data.
In order to migrate your Qubes system from one physical machine to another, simply follow the backup procedure on the old machine, [install Qubes](/wiki/QubesDownloads) on the new machine, and follow the restoration procedure on the new machine. All of your settings and data will be preserved!
Troubleshooting and Technical Details
-------------------------------------
- For troubleshooting (especially if you encounter a bug or error message during the backup or restore process), please refer to [this thread](https://groups.google.com/d/topic/qubes-users/XfyJHSCD4_U/discussion).
- For the technical details of the backup system, please refer to [this thread](https://groups.google.com/d/topic/qubes-devel/TQr_QcXIVww/discussion).
