* VMs used for development (dev environments often require a lot of specific packages and tools)
* VMs used for installing untrusted packages.
Normally, you install digitally signed software from Red Hat/Fedora repositories, and it's reasonable that such software has non malicious *installation* scripts (rpm pre/post scripts).
However, when you would like to install some packages from less trusted sources, or unsigned, then using a dedicated (untrusted) standalone VM might be a better way.
Meanwhile, a [Hardware-assisted Virtual Machine (HVM)](/doc/glossary/#hvm), also known as a "Fully-Virtualized Virtual Machine," utilizes the virtualization extensions of the host CPU.
These are typically contrasted with [Paravirtualized (PV)](/doc/glossary/#pv) VMs.
HVMs allow you to create qubes based on any OS for which you have an installation ISO, so you can easily have qubes running Windows, *BSD, or any Linux distribution.
You can also use HVMs to run "live" distros.
By default, every Qubes VM runs in [PVH](/doc/glossary/#pvhvm) mode (which has security advantages over both PV and HVM) except for those with attached PCI devices, which run in HVM mode.
See [here](https://blog.invisiblethings.org/2017/07/31/qubes-40-rc1.html) for a discussion of the switch from PV to HVM and [here](/news/2018/01/11/qsb-37/) for the announcement about the change to using PVH as default.
The StandaloneVM/TemplateVM distinction and the HVM/PV/PVH distinctions are orthogonal.
The former is about root filesystem inheritance, whereas the latter is about the virtualization mode.
In practice, however, it is most common for StandaloneVMs to be HVMs and for HVMs to be StandaloneVMs.
In fact, this is so common that [StandaloneHVMs](/doc/glossary/#standalonehvm) are typically just called "HVMs."
Hence, this page covers both topics.
## Creating a StandaloneVM
You can create a StandaloneVM in the Qube Manager by selecting the "Type" of "Standalone qube copied from a template" or "Empty standalone qube (install your own OS)."
For security reasons you should *never* copy untrusted data to dom0. Qubes doesn't provide any easy to use mechanism for copying files between qubes and Dom0 and generally tries to discourage such actions.
Just like standard paravirtualized AppVMs, the HVM qubes get fixed IP addresses centrally assigned by Qubes.
Normally Qubes agent scripts (or services on Windows) running within each AppVM are responsible for setting up networking within the VM according to the configuration created by Qubes (through [keys](/doc/vm-interface/#qubesdb) exposed by dom0 to the VM).
Such centrally managed networking infrastructure allows for [advanced networking configuration](https://blog.invisiblethings.org/2011/09/28/playing-with-qubes-networking-for-fun.html).
A generic HVM domain such as a standard Windows or Ubuntu installation, however, has no Qubes agent scripts running inside it initially and thus requires manual configuration of networking so that it matches the values assigned by Qubes for this qube.
Even though we do have a small DHCP server that runs inside HVM untrusted stub domain to make the manual network configuration unnecessary for many VMs, this won't work for most modern Linux distributions which contain Xen networking PV drivers (but not Qubes tools) which bypass the stub-domain networking (their net frontends connect directly to the net backend in the netvm).
Qubes allows HVMs to share a common root filesystem from a select TemplateVM (see [TemplateHVM](/doc/glossary/#templatehvm) and [TemplateBasedHVM](/doc/glossary/#templatebasedhvm)).
Set memory as appropriate, and install the OS into this template in the same way you would install it into a normal HVM -- please see instructions on [this page](/doc/hvm-create/).
Generally you should install in to the first "system" disk. (Resize it as needed before starting installation.)
You can then create a new qube using the new template.
If you use this Template as it is, then any HVMs that use it will effectively be DisposableVMs - all file system changes will be wiped when the HVM is closed down.
Please see [this page](/doc/windows-appvms/) for specific advice on installing and using Windows-based Templates.
Just like normal AppVMs, the HVM domains can also be cloned either using the command-line `qvm-clone` or via the Qube Manager's 'Clone VM' option in the right-click menu.
The cloned VM will get identical root and private images and will essentially be identical to the original VM except that it will get a different MAC address for the networking interface:
If for any reason you would like to make sure that the two VMs have the same MAC address, you can use `qvm-prefs` to set a fixed MAC address for the VM:
HVM domains (including Windows VMs) can be [assigned PCI devices](/doc/assigning-devices/) just like normal AppVMs.
E.g. one can assign one of the USB controllers to the Windows VM and should be able to use various devices that require Windows software, such as phones, electronic devices that are configured via FTDI, etc.
One problem at the moment however, is that after the whole system gets suspended into S3 sleep and subsequently resumed, some attached devices may stop working and should be restarted within the VM.
This can be achieved under a Windows HVM by opening the Device Manager, selecting the actual device (such as a USB controller), 'Disabling' the device, and then 'Enabling' the device again.
For example, Microsoft provides [free 90 day evaluation VirtualBox VMs for browser testing](https://developer.microsoft.com/en-us/microsoft-edge/tools/vms/).
