portapack-mayhem/firmware/application/receiver_model.cpp

/*
 * Copyright (C) 2014 Jared Boone, ShareBrained Technology, Inc.
 *
 * This file is part of PortaPack.
 *
 * This program is free software; you can redistribute it and/or modify
 * it under the terms of the GNU General Public License as published by
 * the Free Software Foundation; either version 2, or (at your option)
 * any later version.
 *
 * This program is distributed in the hope that it will be useful,
 * but WITHOUT ANY WARRANTY; without even the implied warranty of
 * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
 * GNU General Public License for more details.
 *
 * You should have received a copy of the GNU General Public License
 * along with this program; see the file COPYING.  If not, write to
 * the Free Software Foundation, Inc., 51 Franklin Street,
 * Boston, MA 02110-1301, USA.
 */

#include "receiver_model.hpp"

#include "baseband_api.hpp"

#include "portapack_persistent_memory.hpp"
#include "hackrf_gpio.hpp"
#include "portapack.hpp"
using namespace hackrf::one;
using namespace portapack;

#include "radio.hpp"
#include "audio.hpp"

#include "dsp_fir_taps.hpp"
#include "dsp_iir.hpp"
#include "dsp_iir_config.hpp"

namespace {

static constexpr std::array<baseband::AMConfig, 5> am_configs { {	// we config here all the non COMMON  parameters to each AM modulation type in RX.
	{ taps_9k0_decim_2, taps_9k0_dsb_channel, AMConfigureMessage::Modulation::DSB },		// AM DSB-C  BW 9khz  (+-4k5)	commercial EU bandwidth .
	{ taps_6k0_decim_2, taps_6k0_dsb_channel, AMConfigureMessage::Modulation::DSB },		// AM DSB-C  BW 6khz  (+-3k0)	narrow AM , ham equipments.
	{ taps_6k0_decim_2, taps_2k8_usb_channel, AMConfigureMessage::Modulation::SSB },		// SSB USB   BW 2K8   (+ 2K8)
	{ taps_6k0_decim_2, taps_2k8_lsb_channel, AMConfigureMessage::Modulation::SSB },		// SSB LSB   BW 2K8   (- 2K8)
	{ taps_6k0_decim_2, taps_0k7_usb_channel, AMConfigureMessage::Modulation::SSB },		// SSB USB   BW 0K7   (+ 0K7)  used to get audio tone from CW Morse, assuming tx shifted +700hz aprox 
} };

static constexpr std::array<baseband::NBFMConfig, 3> nbfm_configs { {
	{ taps_4k25_decim_0, taps_4k25_decim_1, taps_4k25_channel, 2500 },
	{ taps_11k0_decim_0, taps_11k0_decim_1, taps_11k0_channel, 2500 },
	{ taps_16k0_decim_0, taps_16k0_decim_1, taps_16k0_channel, 5000 },
} };

static constexpr std::array<baseband::WFMConfig, 1> wfm_configs { {
	{ },
} };

} /* namespace */

rf::Frequency ReceiverModel::tuning_frequency() const {
	return persistent_memory::tuned_frequency();
}

void ReceiverModel::set_tuning_frequency(rf::Frequency f) {
	persistent_memory::set_tuned_frequency(f);
	update_tuning_frequency();
}

rf::Frequency ReceiverModel::frequency_step() const {
	return frequency_step_;
}

void ReceiverModel::set_frequency_step(rf::Frequency f) {
	frequency_step_ = f;
}

void ReceiverModel::set_antenna_bias() {
	update_antenna_bias();
}

bool ReceiverModel::rf_amp() const {
	return rf_amp_;
}

void ReceiverModel::set_rf_amp(bool enabled) {
	rf_amp_ = enabled;
	update_rf_amp();
}

int32_t ReceiverModel::lna() const {
	return lna_gain_db_;
}

void ReceiverModel::set_lna(int32_t v_db) {
	lna_gain_db_ = v_db;
	update_lna();
}

uint32_t ReceiverModel::baseband_bandwidth() const {
	return baseband_bandwidth_;
}

void ReceiverModel::set_baseband_bandwidth(uint32_t v) {
	baseband_bandwidth_ = v;
	update_baseband_bandwidth();
}

int32_t ReceiverModel::vga() const {
	return vga_gain_db_;
}

void ReceiverModel::set_vga(int32_t v_db) {
	vga_gain_db_ = v_db;
	update_vga();
}

int32_t ReceiverModel::tx_gain() const {
	return tx_gain_db_;
}

void ReceiverModel::set_tx_gain(int32_t v_db) {
	tx_gain_db_ = v_db;
	update_tx_gain();
}

uint32_t ReceiverModel::sampling_rate() const {
	return sampling_rate_;
}

void ReceiverModel::set_sampling_rate(uint32_t v) {
	sampling_rate_ = v;
	update_sampling_rate();
}

ReceiverModel::Mode ReceiverModel::modulation() const {
	return mode_;
}

void ReceiverModel::set_modulation(const Mode v) {
	mode_ = v;
	update_modulation();
}

volume_t ReceiverModel::headphone_volume() const {
	return headphone_volume_;
}

void ReceiverModel::set_headphone_volume(volume_t v) {
	headphone_volume_ = v;
	update_headphone_volume();
}

uint8_t ReceiverModel::squelch_level() const {
	return squelch_level_;
}

void ReceiverModel::set_squelch_level(uint8_t v) {
	squelch_level_ = v;
	update_modulation();
}

void ReceiverModel::enable() {
	enabled_ = true;
	radio::set_direction(rf::Direction::Receive);
	update_tuning_frequency();
	update_antenna_bias();
	update_rf_amp();
	update_lna();
	update_vga();
	update_tx_gain();
	update_baseband_bandwidth();
	update_sampling_rate();
	update_modulation();
	
	// TODO: would challenge if this should belong to the
	// receiver_model namespace:
	update_headphone_volume();

	led_rx.on();
}

void ReceiverModel::disable() {
	enabled_ = false;
	radio::set_antenna_bias(false);

	// TODO: Responsibility for enabling/disabling the radio is muddy.
	// Some happens in ReceiverModel, some inside radio namespace.
	radio::disable();

	// TODO: we are doing this repeatedly in different levels of the
	// call stack. Keeping it for now, but there seem to be too many
	// redundant calls:
	led_rx.off();
}

int32_t ReceiverModel::tuning_offset() {
	if( (modulation() == Mode::SpectrumAnalysis) ) {
		return 0;
	} else {
		return -(sampling_rate() / 4);
	}
}

void ReceiverModel::update_tuning_frequency() {
	radio::set_tuning_frequency(persistent_memory::tuned_frequency() + tuning_offset());
}

void ReceiverModel::update_antenna_bias() {
	if (enabled_)
		radio::set_antenna_bias(portapack::get_antenna_bias());
}

void ReceiverModel::update_rf_amp() {
	radio::set_rf_amp(rf_amp_);
}

void ReceiverModel::update_lna() {
	radio::set_lna_gain(lna_gain_db_);
}

void ReceiverModel::update_baseband_bandwidth() {
	radio::set_baseband_filter_bandwidth(baseband_bandwidth_);
}

void ReceiverModel::update_vga() {
	radio::set_vga_gain(vga_gain_db_);
}

void ReceiverModel::update_tx_gain() {
	radio::set_tx_gain(tx_gain_db_);
}

void ReceiverModel::set_am_configuration(const size_t n) {
	if( n < am_configs.size() ) {
		am_config_index = n;
		update_modulation();
	}
}

void ReceiverModel::set_nbfm_configuration(const size_t n) {
	if( n < nbfm_configs.size() ) {
		nbfm_config_index = n;
		update_modulation();
	}
}

void ReceiverModel::set_wfm_configuration(const size_t n) {
	if( n < wfm_configs.size() ) {
		wfm_config_index = n;
		update_modulation();
	}
}

void ReceiverModel::update_sampling_rate() {
	// TODO: Move more low-level radio control stuff to M4. It'll enable tighter
	// synchronization for things like wideband (sweeping) spectrum analysis, and
	// protocols that need quick RX/TX turn-around.

	// Disabling baseband while changing sampling rates seems like a good idea...
	radio::set_baseband_rate(sampling_rate());
	update_tuning_frequency();
}

void ReceiverModel::update_headphone_volume() {
	// TODO: Manipulating audio codec here, and in ui_receiver.cpp. Good to do
	// both?

	audio::headphone::set_volume(headphone_volume_);
}

void ReceiverModel::update_modulation() {
	switch(modulation()) {
	default:
	case Mode::AMAudio:
		update_am_configuration();
		break;

	case Mode::NarrowbandFMAudio:
		update_nbfm_configuration();
		break;

	case Mode::WidebandFMAudio:
		update_wfm_configuration();
		break;

	case Mode::SpectrumAnalysis:
	case Mode::Capture:
		break;
	}
}

size_t ReceiverModel::am_configuration() const {
	return am_config_index;
}

void ReceiverModel::update_am_configuration() {
	am_configs[am_config_index].apply();
}

size_t ReceiverModel::nbfm_configuration() const {
	return nbfm_config_index;
}

void ReceiverModel::update_nbfm_configuration() {
	nbfm_configs[nbfm_config_index].apply(squelch_level_);
}

size_t ReceiverModel::wfm_configuration() const {
	return wfm_config_index;
}

void ReceiverModel::update_wfm_configuration() {
	wfm_configs[wfm_config_index].apply();
}

void ReceiverModel::set_configuration_without_init(const Mode new_mode, const rf::Frequency new_frequency_step, const size_t new_am_config_index, const size_t new_nbfm_config_index, const size_t new_wfm_config_index, uint8_t new_squelch_level) {
	mode_ = new_mode;
	frequency_step_ = new_frequency_step;
	am_config_index = new_am_config_index;
	nbfm_config_index = new_nbfm_config_index;
	wfm_config_index = new_wfm_config_index;
	squelch_level_ = new_squelch_level;
}