portapack-mayhem/firmware/chibios/demos/MSP430-MSP430x1611-GCC
2015-07-08 08:40:23 -07:00
..
chconf.h ChibiOS 2.6.8, until I can figure out where to get it from git. 2015-07-08 08:40:23 -07:00
halconf.h ChibiOS 2.6.8, until I can figure out where to get it from git. 2015-07-08 08:40:23 -07:00
main.c ChibiOS 2.6.8, until I can figure out where to get it from git. 2015-07-08 08:40:23 -07:00
Makefile ChibiOS 2.6.8, until I can figure out where to get it from git. 2015-07-08 08:40:23 -07:00
mcuconf.h ChibiOS 2.6.8, until I can figure out where to get it from git. 2015-07-08 08:40:23 -07:00
memory.x ChibiOS 2.6.8, until I can figure out where to get it from git. 2015-07-08 08:40:23 -07:00
msp430.x ChibiOS 2.6.8, until I can figure out where to get it from git. 2015-07-08 08:40:23 -07:00
periph.x ChibiOS 2.6.8, until I can figure out where to get it from git. 2015-07-08 08:40:23 -07:00
readme.txt ChibiOS 2.6.8, until I can figure out where to get it from git. 2015-07-08 08:40:23 -07:00

*****************************************************************************
** ChibiOS/RT port for Texas Instruments MSP430.                           **
*****************************************************************************

** TARGET **

The demo runs on an Olimex MSP430-P1611 board with a 8MHz xtal installed. In
order to execute the demo without an crystal you need to edit mcuconf.h
and change:
#define MSP430_USE_CLOCK            MSP430_CLOCK_SOURCE_XT2CLK
in:
#define MSP430_USE_CLOCK            MSP430_CLOCK_SOURCE_DCOCLK

** The Demo **

The demo flashes the board LED using a thread, by pressing the button located
on the board the test procedure is activated with output on the serial port
COM1 (USART0).

** Build Procedure **

The demo was built using the MSPGCC toolchain.

** Notes **

The demo requires include files from MSPGCC that are not part of the ChibiOS/RT
distribution, please install MSPGCC.

                         http://mspgcc.sourceforge.net/