portapack-mayhem/firmware/baseband/Makefile
Jared Boone b82eff51dd Refactor of capture buffer management between cores.
Instead of copying data into and out of FIFO, passing buffer pointers between cores that are sized to match preferred/ideal SD card write size.
2016-05-10 14:12:37 -07:00

291 lines
8.2 KiB
Makefile
Executable File

#
# Copyright (C) 2014 Jared Boone, ShareBrained Technology, Inc.
#
# This file is part of PortaPack.
#
# This program is free software; you can redistribute it and/or modify
# it under the terms of the GNU General Public License as published by
# the Free Software Foundation; either version 2, or (at your option)
# any later version.
#
# This program is distributed in the hope that it will be useful,
# but WITHOUT ANY WARRANTY; without even the implied warranty of
# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
# GNU General Public License for more details.
#
# You should have received a copy of the GNU General Public License
# along with this program; see the file COPYING. If not, write to
# the Free Software Foundation, Inc., 51 Franklin Street,
# Boston, MA 02110-1301, USA.
#
##############################################################################
# Build global options
# NOTE: Can be overridden externally.
#
# Compiler options here.
ifeq ($(USE_OPT),)
USE_OPT = -mthumb \
-O3 -ggdb3 \
-ffunction-sections \
-fdata-sections \
-fno-builtin \
-falign-functions=16 \
-fno-math-errno \
--specs=nano.specs
#-fomit-frame-pointer
endif
# C specific options here (added to USE_OPT).
ifeq ($(USE_COPT),)
USE_COPT = -std=gnu99
endif
# C++ specific options here (added to USE_OPT).
ifeq ($(USE_CPPOPT),)
USE_CPPOPT = -std=c++11 -fno-rtti -fno-exceptions
endif
# Enable this if you want the linker to remove unused code and data
ifeq ($(USE_LINK_GC),)
USE_LINK_GC = yes
endif
# Linker extra options here.
ifeq ($(USE_LDOPT),)
USE_LDOPT =
endif
# Enable this if you want link time optimizations (LTO)
ifeq ($(USE_LTO),)
USE_LTO = no
endif
# If enabled, this option allows to compile the application in THUMB mode.
ifeq ($(USE_THUMB),)
USE_THUMB = yes
endif
# Enable this if you want to see the full log while compiling.
ifeq ($(USE_VERBOSE_COMPILE),)
USE_VERBOSE_COMPILE = no
endif
#
# Build global options
##############################################################################
##############################################################################
# Architecture or project specific options
#
# Enables the use of FPU on Cortex-M4 (no, softfp, hard).
ifeq ($(USE_FPU),)
USE_FPU = hard
endif
#
# Architecture or project specific options
##############################################################################
##############################################################################
# Project, sources and paths
#
# Define project name here
PROJECT = baseband
# Imported source files and paths
CHIBIOS = ../chibios
CHIBIOS_PORTAPACK = ../chibios-portapack
include $(CHIBIOS_PORTAPACK)/boards/GSG_HACKRF_ONE/board.mk
include $(CHIBIOS_PORTAPACK)/os/hal/platforms/LPC43xx_M4/platform.mk
include $(CHIBIOS)/os/hal/hal.mk
include $(CHIBIOS_PORTAPACK)/os/ports/GCC/ARMCMx/LPC43xx_M4/port.mk
include $(CHIBIOS)/os/kernel/kernel.mk
include $(CHIBIOS)/test/test.mk
# Define linker script file here
LDSCRIPT= $(PORTLD)/LPC43xx_M4.ld
# C sources that can be compiled in ARM or THUMB mode depending on the global
# setting.
CSRC = $(PORTSRC) \
$(KERNSRC) \
$(TESTSRC) \
$(HALSRC) \
$(PLATFORMSRC) \
$(BOARDSRC)
# C++ sources that can be compiled in ARM or THUMB mode depending on the global
# setting.
CPPSRC = main.cpp \
message_queue.cpp \
event.cpp \
event_m4.cpp \
thread_wait.cpp \
gpdma.cpp \
baseband_dma.cpp \
baseband_sgpio.cpp \
portapack_shared_memory.cpp \
baseband_thread.cpp \
baseband_processor.cpp \
baseband_stats_collector.cpp \
dsp_decimate.cpp \
dsp_demodulate.cpp \
matched_filter.cpp \
proc_am_audio.cpp \
proc_nfm_audio.cpp \
spectrum_collector.cpp \
proc_wfm_audio.cpp \
proc_ais.cpp \
proc_wideband_spectrum.cpp \
proc_tpms.cpp \
proc_ert.cpp \
proc_capture.cpp \
stream_input.cpp \
dsp_squelch.cpp \
clock_recovery.cpp \
packet_builder.cpp \
dsp_fft.cpp \
dsp_fir_taps.cpp \
dsp_iir.cpp \
fxpt_atan2.cpp \
rssi.cpp \
rssi_dma.cpp \
rssi_thread.cpp \
audio_compressor.cpp \
audio_output.cpp \
audio_dma.cpp \
audio_stats_collector.cpp \
touch_dma.cpp \
../common/utility.cpp \
../common/chibios_cpp.cpp \
../common/debug.cpp \
../common/gcc.cpp
# C sources to be compiled in ARM mode regardless of the global setting.
# NOTE: Mixing ARM and THUMB mode enables the -mthumb-interwork compiler
# option that results in lower performance and larger code size.
ACSRC =
# C++ sources to be compiled in ARM mode regardless of the global setting.
# NOTE: Mixing ARM and THUMB mode enables the -mthumb-interwork compiler
# option that results in lower performance and larger code size.
ACPPSRC =
# C sources to be compiled in THUMB mode regardless of the global setting.
# NOTE: Mixing ARM and THUMB mode enables the -mthumb-interwork compiler
# option that results in lower performance and larger code size.
TCSRC =
# C sources to be compiled in THUMB mode regardless of the global setting.
# NOTE: Mixing ARM and THUMB mode enables the -mthumb-interwork compiler
# option that results in lower performance and larger code size.
TCPPSRC =
# List ASM source files here
ASMSRC = $(PORTASM)
INCDIR = ../common $(PORTINC) $(KERNINC) $(TESTINC) \
$(HALINC) $(PLATFORMINC) $(BOARDINC) \
$(CHIBIOS)/os/various
#
# Project, sources and paths
##############################################################################
##############################################################################
# Compiler settings
#
MCU = cortex-m4
#TRGT = arm-elf-
TRGT = arm-none-eabi-
CC = $(TRGT)gcc
CPPC = $(TRGT)g++
# Enable loading with g++ only if you need C++ runtime support.
# NOTE: You can use C++ even without C++ support if you are careful. C++
# runtime support makes code size explode.
#LD = $(TRGT)gcc
LD = $(TRGT)g++
CP = $(TRGT)objcopy
AS = $(TRGT)gcc -x assembler-with-cpp
OD = $(TRGT)objdump
SZ = $(TRGT)size
HEX = $(CP) -O ihex
BIN = $(CP) -O binary
# ARM-specific options here
AOPT =
# THUMB-specific options here
TOPT = -mthumb -DTHUMB
# Define C warning options here
CWARN = -Wall -Wextra -Wstrict-prototypes
# Define C++ warning options here
CPPWARN = -Wall -Wextra
#
# Compiler settings
##############################################################################
##############################################################################
# Start of default section
#
# List all default C defines here, like -D_DEBUG=1
# TODO: Switch -DCRT0_INIT_DATA depending on load from RAM or SPIFI?
# NOTE: _RANDOM_TCC to kill a GCC 4.9.3 error with std::max argument types
DDEFS = -DLPC43XX -DLPC43XX_M4 -D__NEWLIB__ -DHACKRF_ONE \
-DTOOLCHAIN_GCC -DTOOLCHAIN_GCC_ARM -D_RANDOM_TCC=0 \
-DGIT_REVISION=\"$(GIT_REVISION)\"
# List all default ASM defines here, like -D_DEBUG=1
DADEFS =
# List all default directories to look for include files here
DINCDIR =
# List the default directory to look for the libraries here
DLIBDIR =
# List all default libraries here
DLIBS =
#
# End of default section
##############################################################################
##############################################################################
# Start of user section
#
# List all user C define here, like -D_DEBUG=1
UDEFS =
# Define ASM defines here
UADEFS =
# List all user directories here
UINCDIR =
# List the user directory to look for the libraries here
ULIBDIR =
# List all user libraries here
ULIBS =
#
# End of user defines
##############################################################################
RULESPATH = $(CHIBIOS)/os/ports/GCC/ARMCMx
include $(RULESPATH)/rules.mk