mirror of
https://github.com/eried/portapack-mayhem.git
synced 2024-12-21 05:34:24 -05:00
652 lines
32 KiB
C
Executable File
652 lines
32 KiB
C
Executable File
/*
|
|
ChibiOS/RT - Copyright (C) 2006-2013 Giovanni Di Sirio
|
|
|
|
Licensed under the Apache License, Version 2.0 (the "License");
|
|
you may not use this file except in compliance with the License.
|
|
You may obtain a copy of the License at
|
|
|
|
http://www.apache.org/licenses/LICENSE-2.0
|
|
|
|
Unless required by applicable law or agreed to in writing, software
|
|
distributed under the License is distributed on an "AS IS" BASIS,
|
|
WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
|
|
See the License for the specific language governing permissions and
|
|
limitations under the License.
|
|
*/
|
|
|
|
#ifndef _BOARD_H_
|
|
#define _BOARD_H_
|
|
|
|
/*
|
|
* Setup for Olimex STM32-P407 board.
|
|
* NOTE: Part of JTAG signals are used for other functions, this board can be
|
|
* used using SWD only.
|
|
*/
|
|
|
|
/*
|
|
* Board identifier.
|
|
*/
|
|
#define BOARD_OLIMEX_STM32_P407
|
|
#define BOARD_NAME "Olimex STM32-P407"
|
|
|
|
/*
|
|
* Ethernet PHY type.
|
|
*/
|
|
#define BOARD_PHY_ID MII_KS8721_ID
|
|
#define BOARD_PHY_RMII
|
|
|
|
/*
|
|
* Board frequencies.
|
|
* NOTE: The LSE crystal is not fitted by default on the board.
|
|
*/
|
|
#define STM32_LSECLK 32768
|
|
#define STM32_HSECLK 25000000
|
|
|
|
/*
|
|
* Board voltages.
|
|
* Required for performance limits calculation.
|
|
*/
|
|
#define STM32_VDD 330
|
|
|
|
/*
|
|
* MCU type as defined in the ST header.
|
|
*/
|
|
#define STM32F40_41xxx
|
|
|
|
/*
|
|
* IO pins assignments.
|
|
*/
|
|
#define GPIOA_BUTTON_WKUP 0
|
|
#define GPIOA_ETH_RMII_REF_CLK 1
|
|
#define GPIOA_ETH_RMII_MDIO 2
|
|
#define GPIOA_ETH_RMII_MDINT 3
|
|
#define GPIOA_DCMI_HSYNC 4
|
|
#define GPIOA_LCD_SCK 5
|
|
#define GPIOA_DCMI_PIXCLK 6
|
|
#define GPIOA_ETH_RMII_CRS_DV 7
|
|
#define GPIOA_MCO1 8
|
|
#define GPIOA_OTG_FS_VBUS 9
|
|
#define GPIOA_DCMI_D1 10
|
|
#define GPIOA_OTG_FS_DM 11
|
|
#define GPIOA_OTG_FS_DP 12
|
|
#define GPIOA_SWDIO 13
|
|
#define GPIOA_SWCLK 14
|
|
#define GPIOA_I2S3_WS 15
|
|
|
|
#define GPIOB_LCD_BL 0
|
|
#define GPIOB_BUZ 1
|
|
#define GPIOB_CAM_ENB 2
|
|
#define GPIOB_I2S3_CK 3
|
|
#define GPIOB_LCD_MISO 4
|
|
#define GPIOB_I2S3_SD 5
|
|
#define GPIOB_DCMI_D5 6
|
|
#define GPIOB_DCMI_VSYNC 7
|
|
#define GPIOB_CAN1_RX 8
|
|
#define GPIOB_CAN1_TX 9
|
|
#define GPIOB_USB_FS_FAULT 10
|
|
#define GPIOB_ETH_RMII_TX_EN 11
|
|
#define GPIOB_OTG_HS_ID 12
|
|
#define GPIOB_OTG_HS_VBUS 13
|
|
#define GPIOB_OTG_HS_DM 14
|
|
#define GPIOB_OTG_HS_DP 15
|
|
|
|
#define GPIOC_TRIM 0
|
|
#define GPIOC_ETH_RMII_MDC 1
|
|
#define GPIOC_USB_FS_VBUSON 2
|
|
#define GPIOC_LCD_MOSI 3
|
|
#define GPIOC_ETH_RMII_RXD0 4
|
|
#define GPIOC_ETH_RMII_RXD1 5
|
|
#define GPIOC_DCMI_D0_US6_TX 6
|
|
#define GPIOC_I2S3_MCK 7
|
|
#define GPIOC_DCMI_D2 8
|
|
#define GPIOC_DCMI_D3 9
|
|
#define GPIOC_SPI3_SCK 10
|
|
#define GPIOC_SPI3_MISO 11
|
|
#define GPIOC_SPI3_MOSI 12
|
|
#define GPIOC_SWITCH_TAMPER 13
|
|
#define GPIOC_OSC32_IN 14
|
|
#define GPIOC_OSC32_OUT 15
|
|
|
|
#define GPIOD_USELESS0 0
|
|
#define GPIOD_USELESS1 1
|
|
#define GPIOD_SPI3_CS 2
|
|
#define GPIOD_LCD_RST 3
|
|
#define GPIOD_USELESS4 4
|
|
#define GPIOD_USELESS5 5
|
|
#define GPIOD_LCD_CS 6
|
|
#define GPIOD_USELESS7 7
|
|
#define GPIOD_USART3_TX 8
|
|
#define GPIOD_USART3_RX 9
|
|
#define GPIOD_USELESS10 10
|
|
#define GPIOD_USART3_CTS 11
|
|
#define GPIOD_USART3_RTS 12
|
|
#define GPIOD_USB_HS_FAULT 13
|
|
#define GPIOD_USELESS14 14
|
|
#define GPIOD_USELESS15 15
|
|
|
|
#define GPIOE_0 0
|
|
#define GPIOE_1 1
|
|
#define GPIOE_TEMP_ALERT 2
|
|
#define GPIOE_USB_HS_VBUSON 3
|
|
#define GPIOE_4 4
|
|
#define GPIOE_5 5
|
|
#define GPIOE_6 6
|
|
#define GPIOE_7 7
|
|
#define GPIOE_8 8
|
|
#define GPIOE_9 9
|
|
#define GPIOE_10 10
|
|
#define GPIOE_11 11
|
|
#define GPIOE_12 12
|
|
#define GPIOE_13 13
|
|
#define GPIOE_14 14
|
|
#define GPIOE_15 15
|
|
|
|
#define GPIOF_0 0
|
|
#define GPIOF_1 1
|
|
#define GPIOF_2 2
|
|
#define GPIOF_3 3
|
|
#define GPIOF_4 4
|
|
#define GPIOF_5 5
|
|
#define GPIOF_STAT1 6
|
|
#define GPIOF_STAT2 7
|
|
#define GPIOF_STAT3 8
|
|
#define GPIOF_CAM_PWR 9
|
|
#define GPIOF_10 10
|
|
#define GPIOF_CAM_RS 11
|
|
#define GPIOF_12 12
|
|
#define GPIOF_13 13
|
|
#define GPIOF_14 14
|
|
#define GPIOF_15 15
|
|
|
|
#define GPIOG_0 0
|
|
#define GPIOG_1 1
|
|
#define GPIOG_2 2
|
|
#define GPIOG_3 3
|
|
#define GPIOG_4 4
|
|
#define GPIOG_5 5
|
|
#define GPIOG_RIGHT 6
|
|
#define GPIOG_UP 7
|
|
#define GPIOG_DOWN 8
|
|
#define GPIOG_USART6_RX 9
|
|
#define GPIOG_10 10
|
|
#define GPIOG_LEFT 11
|
|
#define GPIOG_12 12
|
|
#define GPIOG_ETH_RMII_TXD0 13
|
|
#define GPIOG_ETH_RMII_TXD1 14
|
|
#define GPIOG_CENT 15
|
|
|
|
#define GPIOH_OSC_IN 0
|
|
#define GPIOH_OSC_OUT 1
|
|
|
|
/*
|
|
* I/O ports initial setup, this configuration is established soon after reset
|
|
* in the initialization code.
|
|
* Please refer to the STM32 Reference Manual for details.
|
|
*/
|
|
#define PIN_MODE_INPUT(n) (0U << ((n) * 2))
|
|
#define PIN_MODE_OUTPUT(n) (1U << ((n) * 2))
|
|
#define PIN_MODE_ALTERNATE(n) (2U << ((n) * 2))
|
|
#define PIN_MODE_ANALOG(n) (3U << ((n) * 2))
|
|
#define PIN_OTYPE_PUSHPULL(n) (0U << (n))
|
|
#define PIN_OTYPE_OPENDRAIN(n) (1U << (n))
|
|
#define PIN_OSPEED_2M(n) (0U << ((n) * 2))
|
|
#define PIN_OSPEED_25M(n) (1U << ((n) * 2))
|
|
#define PIN_OSPEED_50M(n) (2U << ((n) * 2))
|
|
#define PIN_OSPEED_100M(n) (3U << ((n) * 2))
|
|
#define PIN_PUDR_FLOATING(n) (0U << ((n) * 2))
|
|
#define PIN_PUDR_PULLUP(n) (1U << ((n) * 2))
|
|
#define PIN_PUDR_PULLDOWN(n) (2U << ((n) * 2))
|
|
#define PIN_AFIO_AF(n, v) ((v##U) << ((n % 8) * 4))
|
|
|
|
/*
|
|
* Port A setup.
|
|
*
|
|
* PA0 - GPIOA_BUTTON_WKUP (input floating).
|
|
* PA1 - GPIOA_ETH_RMII_REF_CLK(alternate 11).
|
|
* PA2 - GPIOA_ETH_RMII_MDIO (alternate 11).
|
|
* PA3 - GPIOA_ETH_RMII_MDINT (input floating).
|
|
* PA4 - GPIOA_DCMI_HSYNC (input pull-up).
|
|
* PA5 - GPIOA_LCD_SCK (output push-pull).
|
|
* PA6 - GPIOA_DCMI_PIXCLK (input pull-up).
|
|
* PA7 - GPIOA_ETH_RMII_CRS_DV (alternate 11).
|
|
* PA8 - GPIOA_MCO1 (alternate 0).
|
|
* PA9 - GPIOA_OTG_FS_VBUS (input pull-up).
|
|
* PA10 - GPIOA_DCMI_D1 (input pull-up).
|
|
* PA11 - GPIOA_OTG_FS_DM (alternate 10).
|
|
* PA12 - GPIOA_OTG_FS_DP (alternate 10).
|
|
* PA13 - GPIOA_SWDIO (alternate 0).
|
|
* PA14 - GPIOA_SWCLK (alternate 0, pull-down).
|
|
* PA15 - GPIOA_I2S3_WS (alternate 6).
|
|
*/
|
|
#define VAL_GPIOA_MODER (PIN_MODE_INPUT(GPIOA_BUTTON_WKUP) | \
|
|
PIN_MODE_ALTERNATE(GPIOA_ETH_RMII_REF_CLK) | \
|
|
PIN_MODE_ALTERNATE(GPIOA_ETH_RMII_MDIO) | \
|
|
PIN_MODE_INPUT(GPIOA_ETH_RMII_MDINT) | \
|
|
PIN_MODE_INPUT(GPIOA_DCMI_HSYNC) | \
|
|
PIN_MODE_OUTPUT(GPIOA_LCD_SCK) | \
|
|
PIN_MODE_INPUT(GPIOA_DCMI_PIXCLK) | \
|
|
PIN_MODE_ALTERNATE(GPIOA_ETH_RMII_CRS_DV) | \
|
|
PIN_MODE_ALTERNATE(GPIOA_MCO1) | \
|
|
PIN_MODE_INPUT(GPIOA_OTG_FS_VBUS) | \
|
|
PIN_MODE_INPUT(GPIOA_DCMI_D1) | \
|
|
PIN_MODE_ALTERNATE(GPIOA_OTG_FS_DM) | \
|
|
PIN_MODE_ALTERNATE(GPIOA_OTG_FS_DP) | \
|
|
PIN_MODE_ALTERNATE(GPIOA_SWDIO) | \
|
|
PIN_MODE_ALTERNATE(GPIOA_SWCLK) | \
|
|
PIN_MODE_ALTERNATE(GPIOA_I2S3_WS))
|
|
#define VAL_GPIOA_OTYPER 0x00000000
|
|
#define VAL_GPIOA_OSPEEDR 0xFFFFFFFF
|
|
#define VAL_GPIOA_PUPDR (PIN_PUDR_PULLUP(GPIOA_DCMI_HSYNC) | \
|
|
PIN_PUDR_PULLUP(GPIOA_DCMI_PIXCLK) | \
|
|
PIN_PUDR_PULLDOWN(GPIOA_OTG_FS_VBUS) | \
|
|
PIN_PUDR_PULLUP(GPIOA_DCMI_D1) | \
|
|
PIN_PUDR_PULLDOWN(GPIOA_SWCLK))
|
|
#define VAL_GPIOA_ODR 0xFFFFFFDF
|
|
#define VAL_GPIOA_AFRL (PIN_AFIO_AF(GPIOA_ETH_RMII_REF_CLK, 11) | \
|
|
PIN_AFIO_AF(GPIOA_ETH_RMII_MDIO, 11) | \
|
|
PIN_AFIO_AF(GPIOA_ETH_RMII_CRS_DV, 11))
|
|
#define VAL_GPIOA_AFRH (PIN_AFIO_AF(GPIOA_MCO1, 0) | \
|
|
PIN_AFIO_AF(GPIOA_OTG_FS_DM, 10) | \
|
|
PIN_AFIO_AF(GPIOA_OTG_FS_DP, 10) | \
|
|
PIN_AFIO_AF(GPIOA_SWDIO, 0) | \
|
|
PIN_AFIO_AF(GPIOA_SWCLK, 0) | \
|
|
PIN_AFIO_AF(GPIOA_I2S3_WS, 6))
|
|
|
|
/*
|
|
* Port B setup.
|
|
*
|
|
* PB0 - GPIOB_LCD_BL (output push-pull).
|
|
* PB1 - GPIOB_BUZ (output push-pull).
|
|
* PB2 - GPIOB_CAM_ENB (input floating).
|
|
* PB3 - GPIOB_I2S3_CK (alternate 6).
|
|
* PB4 - GPIOB_LCD_MISO (input floating).
|
|
* PB5 - GPIOB_I2S3_SD (alternate 6).
|
|
* PB6 - GPIOB_DCMI_D5 (input pull-up).
|
|
* PB7 - GPIOB_DCMI_VSYNC (input pull-up).
|
|
* PB8 - GPIOB_CAN1_RX (alternate 9).
|
|
* PB9 - GPIOB_CAN1_TX (alternate 9).
|
|
* PB10 - GPIOB_USB_FS_FAULT (input floating).
|
|
* PB11 - GPIOB_ETH_RMII_TX_EN (alternate 11).
|
|
* PB12 - GPIOB_OTG_HS_ID (alternate 12).
|
|
* PB13 - GPIOB_OTG_HS_VBUS (input pull-up).
|
|
* PB14 - GPIOB_OTG_HS_DM (alternate 12).
|
|
* PB15 - GPIOB_OTG_HS_DP (alternate 12).
|
|
*/
|
|
#define VAL_GPIOB_MODER (PIN_MODE_OUTPUT(GPIOB_LCD_BL) | \
|
|
PIN_MODE_OUTPUT(GPIOB_BUZ) | \
|
|
PIN_MODE_INPUT(GPIOB_CAM_ENB) | \
|
|
PIN_MODE_ALTERNATE(GPIOB_I2S3_CK) | \
|
|
PIN_MODE_INPUT(GPIOB_LCD_MISO) | \
|
|
PIN_MODE_ALTERNATE(GPIOB_I2S3_SD) | \
|
|
PIN_MODE_INPUT(GPIOB_DCMI_D5) | \
|
|
PIN_MODE_INPUT(GPIOB_DCMI_VSYNC) | \
|
|
PIN_MODE_ALTERNATE(GPIOB_CAN1_RX) | \
|
|
PIN_MODE_ALTERNATE(GPIOB_CAN1_TX) | \
|
|
PIN_MODE_INPUT(GPIOB_USB_FS_FAULT) | \
|
|
PIN_MODE_ALTERNATE(GPIOB_ETH_RMII_TX_EN) | \
|
|
PIN_MODE_ALTERNATE(GPIOB_OTG_HS_ID) | \
|
|
PIN_MODE_INPUT(GPIOB_OTG_HS_VBUS) | \
|
|
PIN_MODE_ALTERNATE(GPIOB_OTG_HS_DM) | \
|
|
PIN_MODE_ALTERNATE(GPIOB_OTG_HS_DP))
|
|
#define VAL_GPIOB_OTYPER 0x00000000
|
|
#define VAL_GPIOB_OSPEEDR 0xFFFFFFFF
|
|
#define VAL_GPIOB_PUPDR (PIN_PUDR_PULLUP(GPIOB_DCMI_D5) | \
|
|
PIN_PUDR_PULLUP(GPIOB_DCMI_VSYNC) | \
|
|
PIN_PUDR_PULLDOWN(GPIOB_OTG_HS_VBUS))
|
|
#define VAL_GPIOB_ODR 0xFFFFFFFC
|
|
#define VAL_GPIOB_AFRL (PIN_AFIO_AF(GPIOB_I2S3_CK, 6) | \
|
|
PIN_AFIO_AF(GPIOB_I2S3_SD, 6))
|
|
#define VAL_GPIOB_AFRH (PIN_AFIO_AF(GPIOB_CAN1_RX, 9) | \
|
|
PIN_AFIO_AF(GPIOB_CAN1_TX, 9) | \
|
|
PIN_AFIO_AF(GPIOB_ETH_RMII_TX_EN, 11) | \
|
|
PIN_AFIO_AF(GPIOB_OTG_HS_ID, 12) | \
|
|
PIN_AFIO_AF(GPIOB_OTG_HS_DM, 12) | \
|
|
PIN_AFIO_AF(GPIOB_OTG_HS_DP, 12))
|
|
|
|
/*
|
|
* Port C setup.
|
|
*
|
|
* PC0 - GPIOC_TRIM (input floating).
|
|
* PC1 - GPIOC_ETH_RMII_MDC (alternate 11).
|
|
* PC2 - GPIOC_USB_FS_VBUSON (output push-pull).
|
|
* PC3 - GPIOC_LCD_MOSI (output push-pull).
|
|
* PC4 - GPIOC_ETH_RMII_RXD0 (alternate 11).
|
|
* PC5 - GPIOC_ETH_RMII_RXD1 (alternate 11).
|
|
* PC6 - GPIOC_DCMI_D0_US6_TX (alternate 8).
|
|
* PC7 - GPIOC_I2S3_MCK (alternate 6).
|
|
* PC8 - GPIOC_DCMI_D2 (input pull-up).
|
|
* PC9 - GPIOC_DCMI_D3 (input pull-up).
|
|
* PC10 - GPIOC_SPI3_SCK (alternate 6).
|
|
* PC11 - GPIOC_SPI3_MISO (alternate 6).
|
|
* PC12 - GPIOC_SPI3_MOSI (alternate 6).
|
|
* PC13 - GPIOC_SWITCH_TAMPER (input floating).
|
|
* PC14 - GPIOC_OSC32_IN (input floating).
|
|
* PC15 - GPIOC_OSC32_OUT (input floating).
|
|
*/
|
|
#define VAL_GPIOC_MODER (PIN_MODE_INPUT(GPIOC_TRIM) | \
|
|
PIN_MODE_ALTERNATE(GPIOC_ETH_RMII_MDC) | \
|
|
PIN_MODE_OUTPUT(GPIOC_USB_FS_VBUSON) | \
|
|
PIN_MODE_OUTPUT(GPIOC_LCD_MOSI) | \
|
|
PIN_MODE_ALTERNATE(GPIOC_ETH_RMII_RXD0) | \
|
|
PIN_MODE_ALTERNATE(GPIOC_ETH_RMII_RXD1) | \
|
|
PIN_MODE_ALTERNATE(GPIOC_DCMI_D0_US6_TX) | \
|
|
PIN_MODE_ALTERNATE(GPIOC_I2S3_MCK) | \
|
|
PIN_MODE_INPUT(GPIOC_DCMI_D2) | \
|
|
PIN_MODE_INPUT(GPIOC_DCMI_D3) | \
|
|
PIN_MODE_ALTERNATE(GPIOC_SPI3_SCK) | \
|
|
PIN_MODE_ALTERNATE(GPIOC_SPI3_MISO) | \
|
|
PIN_MODE_ALTERNATE(GPIOC_SPI3_MOSI) | \
|
|
PIN_MODE_INPUT(GPIOC_SWITCH_TAMPER) | \
|
|
PIN_MODE_INPUT(GPIOC_OSC32_IN) | \
|
|
PIN_MODE_INPUT(GPIOC_OSC32_OUT))
|
|
#define VAL_GPIOC_OTYPER 0x00000000
|
|
#define VAL_GPIOC_OSPEEDR 0xFFFFFFFF
|
|
#define VAL_GPIOC_PUPDR (PIN_PUDR_PULLUP(GPIOC_DCMI_D2) | \
|
|
PIN_PUDR_PULLUP(GPIOC_DCMI_D3))
|
|
#define VAL_GPIOC_ODR 0xFFFFFFF3
|
|
#define VAL_GPIOC_AFRL (PIN_AFIO_AF(GPIOC_ETH_RMII_MDC, 11) | \
|
|
PIN_AFIO_AF(GPIOC_ETH_RMII_RXD0, 11) | \
|
|
PIN_AFIO_AF(GPIOC_ETH_RMII_RXD1, 11) | \
|
|
PIN_AFIO_AF(GPIOC_DCMI_D0_US6_TX, 8) | \
|
|
PIN_AFIO_AF(GPIOC_I2S3_MCK, 6))
|
|
#define VAL_GPIOC_AFRH (PIN_AFIO_AF(GPIOC_SPI3_SCK, 6) | \
|
|
PIN_AFIO_AF(GPIOC_SPI3_MISO, 6) | \
|
|
PIN_AFIO_AF(GPIOC_SPI3_MOSI, 6))
|
|
|
|
/*
|
|
* Port D setup.
|
|
*
|
|
* PD0 - GPIOD_USELESS0 (input pull-up).
|
|
* PD1 - GPIOD_USELESS1 (input pull-up).
|
|
* PD2 - GPIOD_SPI3_CS (output opendrain).
|
|
* PD3 - GPIOD_LCD_RST (output push-pull).
|
|
* PD4 - GPIOD_USELESS4 (input pull-up).
|
|
* PD5 - GPIOD_USELESS5 (input pull-up).
|
|
* PD6 - GPIOD_LCD_CS (output push-pull).
|
|
* PD7 - GPIOD_USELESS7 (input pull-up).
|
|
* PD8 - GPIOD_USART3_TX (alternate 8).
|
|
* PD9 - GPIOD_USART3_RX (alternate 8).
|
|
* PD10 - GPIOD_USELESS10 (input pull-up).
|
|
* PD11 - GPIOD_USART3_CTS (alternate 8).
|
|
* PD12 - GPIOD_USART3_RTS (alternate 8).
|
|
* PD13 - GPIOD_USB_HS_FAULT (input floating).
|
|
* PD14 - GPIOD_USELESS14 (input pull-up).
|
|
* PD15 - GPIOD_USELESS15 (input pull-up).
|
|
*/
|
|
#define VAL_GPIOD_MODER (PIN_MODE_INPUT(GPIOD_USELESS0) | \
|
|
PIN_MODE_INPUT(GPIOD_USELESS1) | \
|
|
PIN_MODE_OUTPUT(GPIOD_SPI3_CS) | \
|
|
PIN_MODE_OUTPUT(GPIOD_LCD_RST) | \
|
|
PIN_MODE_INPUT(GPIOD_USELESS4) | \
|
|
PIN_MODE_INPUT(GPIOD_USELESS5) | \
|
|
PIN_MODE_OUTPUT(GPIOD_LCD_CS) | \
|
|
PIN_MODE_INPUT(GPIOD_USELESS7) | \
|
|
PIN_MODE_ALTERNATE(GPIOD_USART3_TX) | \
|
|
PIN_MODE_ALTERNATE(GPIOD_USART3_RX) | \
|
|
PIN_MODE_INPUT(GPIOD_USELESS10) | \
|
|
PIN_MODE_ALTERNATE(GPIOD_USART3_CTS) | \
|
|
PIN_MODE_ALTERNATE(GPIOD_USART3_RTS) | \
|
|
PIN_MODE_INPUT(GPIOD_USB_HS_FAULT) | \
|
|
PIN_MODE_INPUT(GPIOD_USELESS14) | \
|
|
PIN_MODE_INPUT(GPIOD_USELESS15))
|
|
#define VAL_GPIOD_OTYPER PIN_OTYPE_OPENDRAIN(GPIOD_SPI3_CS)
|
|
#define VAL_GPIOD_OSPEEDR 0xFFFFFFFF
|
|
#define VAL_GPIOD_PUPDR (PIN_PUDR_PULLUP(GPIOD_USELESS0) | \
|
|
PIN_PUDR_PULLUP(GPIOD_USELESS1) | \
|
|
PIN_PUDR_PULLUP(GPIOD_USELESS4) | \
|
|
PIN_PUDR_PULLUP(GPIOD_USELESS5) | \
|
|
PIN_PUDR_PULLUP(GPIOD_USELESS7) | \
|
|
PIN_PUDR_PULLUP(GPIOD_USELESS10) | \
|
|
PIN_PUDR_PULLUP(GPIOD_USELESS14) | \
|
|
PIN_PUDR_PULLUP(GPIOD_USELESS15))
|
|
#define VAL_GPIOD_ODR 0xFFFFFFFF
|
|
#define VAL_GPIOD_AFRL 0x00000000
|
|
#define VAL_GPIOD_AFRH (PIN_AFIO_AF(GPIOD_USART3_TX, 7) | \
|
|
PIN_AFIO_AF(GPIOD_USART3_RX, 7) | \
|
|
PIN_AFIO_AF(GPIOD_USART3_CTS, 7) | \
|
|
PIN_AFIO_AF(GPIOD_USART3_RTS, 7))
|
|
|
|
/*
|
|
* Port E setup.
|
|
*
|
|
* PE0 - GPIOE_0 (input pull-up).
|
|
* PE1 - GPIOE_1 (input pull-up).
|
|
* PE2 - GPIOE_TEMP_ALERT (input floating).
|
|
* PE3 - GPIOE_USB_HS_VBUSON (output push-pull).
|
|
* PE4 - GPIOE_4 (input pull-up).
|
|
* PE5 - GPIOE_5 (input pull-up).
|
|
* PE6 - GPIOE_6 (input pull-up).
|
|
* PE7 - GPIOE_7 (input pull-up).
|
|
* PE8 - GPIOE_8 (input pull-up).
|
|
* PE9 - GPIOE_9 (input pull-up).
|
|
* PE10 - GPIOE_10 (input pull-up).
|
|
* PE11 - GPIOE_11 (input pull-up).
|
|
* PE12 - GPIOE_12 (input pull-up).
|
|
* PE13 - GPIOE_13 (input pull-up).
|
|
* PE14 - GPIOE_14 (input pull-up).
|
|
* PE15 - GPIOE_15 (input pull-up).
|
|
*/
|
|
#define VAL_GPIOE_MODER (PIN_MODE_INPUT(GPIOE_0) | \
|
|
PIN_MODE_INPUT(GPIOE_1) | \
|
|
PIN_MODE_INPUT(GPIOE_TEMP_ALERT) | \
|
|
PIN_MODE_OUTPUT(GPIOE_USB_HS_VBUSON) | \
|
|
PIN_MODE_INPUT(GPIOE_4) | \
|
|
PIN_MODE_INPUT(GPIOE_5) | \
|
|
PIN_MODE_INPUT(GPIOE_6) | \
|
|
PIN_MODE_INPUT(GPIOE_7) | \
|
|
PIN_MODE_INPUT(GPIOE_8) | \
|
|
PIN_MODE_INPUT(GPIOE_9) | \
|
|
PIN_MODE_INPUT(GPIOE_10) | \
|
|
PIN_MODE_INPUT(GPIOE_11) | \
|
|
PIN_MODE_INPUT(GPIOE_12) | \
|
|
PIN_MODE_INPUT(GPIOE_13) | \
|
|
PIN_MODE_INPUT(GPIOE_14) | \
|
|
PIN_MODE_INPUT(GPIOE_15))
|
|
#define VAL_GPIOE_OTYPER 0x00000000
|
|
#define VAL_GPIOE_OSPEEDR 0xFFFFFFFF
|
|
#define VAL_GPIOE_PUPDR (PIN_PUDR_PULLUP(GPIOE_0) | \
|
|
PIN_PUDR_PULLUP(GPIOE_1) | \
|
|
PIN_PUDR_PULLUP(GPIOE_4) | \
|
|
PIN_PUDR_PULLUP(GPIOE_5) | \
|
|
PIN_PUDR_PULLUP(GPIOE_6) | \
|
|
PIN_PUDR_PULLUP(GPIOE_7) | \
|
|
PIN_PUDR_PULLUP(GPIOE_8) | \
|
|
PIN_PUDR_PULLUP(GPIOE_9) | \
|
|
PIN_PUDR_PULLUP(GPIOE_10) | \
|
|
PIN_PUDR_PULLUP(GPIOE_11) | \
|
|
PIN_PUDR_PULLUP(GPIOE_12) | \
|
|
PIN_PUDR_PULLUP(GPIOE_13) | \
|
|
PIN_PUDR_PULLUP(GPIOE_14) | \
|
|
PIN_PUDR_PULLUP(GPIOE_15))
|
|
#define VAL_GPIOE_ODR 0xFFFFFFF7
|
|
#define VAL_GPIOE_AFRL 0x00000000
|
|
#define VAL_GPIOE_AFRH 0x00000000
|
|
|
|
/*
|
|
* Port F setup.
|
|
*
|
|
* PF0 - GPIOF_0 (input pull-up).
|
|
* PF1 - GPIOF_1 (input pull-up).
|
|
* PF2 - GPIOF_2 (input pull-up).
|
|
* PF3 - GPIOF_3 (input pull-up).
|
|
* PF4 - GPIOF_4 (input pull-up).
|
|
* PF5 - GPIOF_5 (input pull-up).
|
|
* PF6 - GPIOF_STAT1 (output push-pull).
|
|
* PF7 - GPIOF_STAT2 (output push-pull).
|
|
* PF8 - GPIOF_STAT3 (output push-pull).
|
|
* PF9 - GPIOF_CAM_PWR (output push-pull).
|
|
* PF10 - GPIOF_10 (input pull-up).
|
|
* PF11 - GPIOF_CAM_RS (output push-pull).
|
|
* PF12 - GPIOF_12 (input pull-up).
|
|
* PF13 - GPIOF_13 (input pull-up).
|
|
* PF14 - GPIOF_14 (input pull-up).
|
|
* PF15 - GPIOF_15 (input pull-up).
|
|
*/
|
|
#define VAL_GPIOF_MODER (PIN_MODE_INPUT(GPIOF_0) | \
|
|
PIN_MODE_INPUT(GPIOF_1) | \
|
|
PIN_MODE_INPUT(GPIOF_2) | \
|
|
PIN_MODE_INPUT(GPIOF_3) | \
|
|
PIN_MODE_INPUT(GPIOF_4) | \
|
|
PIN_MODE_INPUT(GPIOF_5) | \
|
|
PIN_MODE_OUTPUT(GPIOF_STAT1) | \
|
|
PIN_MODE_OUTPUT(GPIOF_STAT2) | \
|
|
PIN_MODE_OUTPUT(GPIOF_STAT3) | \
|
|
PIN_MODE_OUTPUT(GPIOF_CAM_PWR) | \
|
|
PIN_MODE_INPUT(GPIOF_10) | \
|
|
PIN_MODE_OUTPUT(GPIOF_CAM_RS) | \
|
|
PIN_MODE_INPUT(GPIOF_12) | \
|
|
PIN_MODE_INPUT(GPIOF_13) | \
|
|
PIN_MODE_INPUT(GPIOF_14) | \
|
|
PIN_MODE_INPUT(GPIOF_15))
|
|
#define VAL_GPIOF_OTYPER 0x00000000
|
|
#define VAL_GPIOF_OSPEEDR 0xFFFFFFFF
|
|
#define VAL_GPIOF_PUPDR (PIN_PUDR_PULLUP(GPIOF_0) | \
|
|
PIN_PUDR_PULLUP(GPIOF_1) | \
|
|
PIN_PUDR_PULLUP(GPIOF_2) | \
|
|
PIN_PUDR_PULLUP(GPIOF_3) | \
|
|
PIN_PUDR_PULLUP(GPIOF_4) | \
|
|
PIN_PUDR_PULLUP(GPIOF_5) | \
|
|
PIN_PUDR_PULLUP(GPIOF_10) | \
|
|
PIN_PUDR_PULLUP(GPIOF_12) | \
|
|
PIN_PUDR_PULLUP(GPIOF_13) | \
|
|
PIN_PUDR_PULLUP(GPIOF_14) | \
|
|
PIN_PUDR_PULLUP(GPIOF_15))
|
|
#define VAL_GPIOF_ODR 0xFFFFFC3F
|
|
#define VAL_GPIOF_AFRL 0x00000000
|
|
#define VAL_GPIOF_AFRH 0x00000000
|
|
|
|
/*
|
|
* Port G setup.
|
|
*
|
|
* PG0 - GPIOG_0 (input pull-up).
|
|
* PG1 - GPIOG_1 (input pull-up).
|
|
* PG2 - GPIOG_2 (input pull-up).
|
|
* PG3 - GPIOG_3 (input pull-up).
|
|
* PG4 - GPIOG_4 (input pull-up).
|
|
* PG5 - GPIOG_5 (input pull-up).
|
|
* PG6 - GPIOG_RIGHT (input floating).
|
|
* PG7 - GPIOG_UP (input floating).
|
|
* PG8 - GPIOG_DOWN (input floating).
|
|
* PG9 - GPIOG_USART6_RX (alternate 8).
|
|
* PG10 - GPIOG_10 (input pull-up).
|
|
* PG11 - GPIOG_LEFT (input floating).
|
|
* PG12 - GPIOG_12 (input pull-up).
|
|
* PG13 - GPIOG_ETH_RMII_TXD0 (alternate 11).
|
|
* PG14 - GPIOG_ETH_RMII_TXD1 (alternate 11).
|
|
* PG15 - GPIOG_CENT (input pull-up).
|
|
*/
|
|
#define VAL_GPIOG_MODER (PIN_MODE_INPUT(GPIOG_0) | \
|
|
PIN_MODE_INPUT(GPIOG_1) | \
|
|
PIN_MODE_INPUT(GPIOG_2) | \
|
|
PIN_MODE_INPUT(GPIOG_3) | \
|
|
PIN_MODE_INPUT(GPIOG_4) | \
|
|
PIN_MODE_INPUT(GPIOG_5) | \
|
|
PIN_MODE_INPUT(GPIOG_RIGHT) | \
|
|
PIN_MODE_INPUT(GPIOG_UP) | \
|
|
PIN_MODE_INPUT(GPIOG_DOWN) | \
|
|
PIN_MODE_ALTERNATE(GPIOG_USART6_RX) | \
|
|
PIN_MODE_INPUT(GPIOG_10) | \
|
|
PIN_MODE_INPUT(GPIOG_LEFT) | \
|
|
PIN_MODE_INPUT(GPIOG_12) | \
|
|
PIN_MODE_ALTERNATE(GPIOG_ETH_RMII_TXD0) | \
|
|
PIN_MODE_ALTERNATE(GPIOG_ETH_RMII_TXD1) | \
|
|
PIN_MODE_INPUT(GPIOG_CENT))
|
|
#define VAL_GPIOG_OTYPER 0x00000000
|
|
#define VAL_GPIOG_OSPEEDR 0xFFFFFFFF
|
|
#define VAL_GPIOG_PUPDR (PIN_PUDR_PULLUP(GPIOG_0) | \
|
|
PIN_PUDR_PULLUP(GPIOG_1) | \
|
|
PIN_PUDR_PULLUP(GPIOG_2) | \
|
|
PIN_PUDR_PULLUP(GPIOG_3) | \
|
|
PIN_PUDR_PULLUP(GPIOG_4) | \
|
|
PIN_PUDR_PULLUP(GPIOG_5) | \
|
|
PIN_PUDR_PULLUP(GPIOG_10) | \
|
|
PIN_PUDR_PULLUP(GPIOG_12))
|
|
#define VAL_GPIOG_ODR 0xFFFFFFFF
|
|
#define VAL_GPIOG_AFRL 0x00000000
|
|
#define VAL_GPIOG_AFRH (PIN_AFIO_AF(GPIOG_USART6_RX, 8) | \
|
|
PIN_AFIO_AF(GPIOG_ETH_RMII_TXD0, 11) | \
|
|
PIN_AFIO_AF(GPIOG_ETH_RMII_TXD1, 11))
|
|
|
|
/*
|
|
* Port H setup.
|
|
* All input with pull-up except:
|
|
* PH0 - GPIOH_OSC_IN (input floating).
|
|
* PH1 - GPIOH_OSC_OUT (input floating).
|
|
*/
|
|
#define VAL_GPIOH_MODER (PIN_MODE_INPUT(GPIOH_OSC_IN) | \
|
|
PIN_MODE_INPUT(GPIOH_OSC_OUT) | \
|
|
PIN_MODE_INPUT(2) | \
|
|
PIN_MODE_INPUT(3) | \
|
|
PIN_MODE_INPUT(4) | \
|
|
PIN_MODE_INPUT(5) | \
|
|
PIN_MODE_INPUT(6) | \
|
|
PIN_MODE_INPUT(7) | \
|
|
PIN_MODE_INPUT(8) | \
|
|
PIN_MODE_INPUT(9) | \
|
|
PIN_MODE_INPUT(10) | \
|
|
PIN_MODE_INPUT(11) | \
|
|
PIN_MODE_INPUT(12) | \
|
|
PIN_MODE_INPUT(13) | \
|
|
PIN_MODE_INPUT(14) | \
|
|
PIN_MODE_INPUT(15))
|
|
#define VAL_GPIOH_OTYPER 0x00000000
|
|
#define VAL_GPIOH_OSPEEDR 0xFFFFFFFF
|
|
#define VAL_GPIOH_PUPDR (PIN_PUDR_FLOATING(GPIOH_OSC_IN) | \
|
|
PIN_PUDR_FLOATING(GPIOH_OSC_OUT) | \
|
|
PIN_PUDR_PULLUP(2) | \
|
|
PIN_PUDR_PULLUP(3) | \
|
|
PIN_PUDR_PULLUP(4) | \
|
|
PIN_PUDR_PULLUP(5) | \
|
|
PIN_PUDR_PULLUP(6) | \
|
|
PIN_PUDR_PULLUP(7) | \
|
|
PIN_PUDR_PULLUP(8) | \
|
|
PIN_PUDR_PULLUP(9) | \
|
|
PIN_PUDR_PULLUP(10) | \
|
|
PIN_PUDR_PULLUP(11) | \
|
|
PIN_PUDR_PULLUP(12) | \
|
|
PIN_PUDR_PULLUP(13) | \
|
|
PIN_PUDR_PULLUP(14) | \
|
|
PIN_PUDR_PULLUP(15))
|
|
#define VAL_GPIOH_ODR 0xFFFFFFFF
|
|
#define VAL_GPIOH_AFRL 0x00000000
|
|
#define VAL_GPIOH_AFRH 0x00000000
|
|
|
|
/*
|
|
* Port I setup.
|
|
* All input with pull-up.
|
|
*/
|
|
#define VAL_GPIOI_MODER 0x00000000
|
|
#define VAL_GPIOI_OTYPER 0x00000000
|
|
#define VAL_GPIOI_OSPEEDR 0xFFFFFFFF
|
|
#define VAL_GPIOI_PUPDR (PIN_PUDR_PULLUP(0) | \
|
|
PIN_PUDR_PULLUP(1) | \
|
|
PIN_PUDR_PULLUP(2) | \
|
|
PIN_PUDR_PULLUP(3) | \
|
|
PIN_PUDR_PULLUP(4) | \
|
|
PIN_PUDR_PULLUP(5) | \
|
|
PIN_PUDR_PULLUP(6) | \
|
|
PIN_PUDR_PULLUP(7) | \
|
|
PIN_PUDR_PULLUP(8) | \
|
|
PIN_PUDR_PULLUP(9) | \
|
|
PIN_PUDR_PULLUP(10) | \
|
|
PIN_PUDR_PULLUP(11) | \
|
|
PIN_PUDR_PULLUP(12) | \
|
|
PIN_PUDR_PULLUP(13) | \
|
|
PIN_PUDR_PULLUP(14) | \
|
|
PIN_PUDR_PULLUP(15))
|
|
#define VAL_GPIOI_ODR 0xFFFFFFFF
|
|
#define VAL_GPIOI_AFRL 0x00000000
|
|
#define VAL_GPIOI_AFRH 0x00000000
|
|
|
|
#if !defined(_FROM_ASM_)
|
|
#ifdef __cplusplus
|
|
extern "C" {
|
|
#endif
|
|
void boardInit(void);
|
|
#ifdef __cplusplus
|
|
}
|
|
#endif
|
|
#endif /* _FROM_ASM_ */
|
|
|
|
#endif /* _BOARD_H_ */
|