mirror of
https://github.com/eried/portapack-mayhem.git
synced 2024-10-01 01:26:06 -04:00
129 lines
3.6 KiB
C
Executable File
129 lines
3.6 KiB
C
Executable File
/*
|
|
ChibiOS/RT - Copyright (C) 2006-2013 Giovanni Di Sirio
|
|
|
|
Licensed under the Apache License, Version 2.0 (the "License");
|
|
you may not use this file except in compliance with the License.
|
|
You may obtain a copy of the License at
|
|
|
|
http://www.apache.org/licenses/LICENSE-2.0
|
|
|
|
Unless required by applicable law or agreed to in writing, software
|
|
distributed under the License is distributed on an "AS IS" BASIS,
|
|
WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
|
|
See the License for the specific language governing permissions and
|
|
limitations under the License.
|
|
*/
|
|
|
|
#ifndef _BOARD_H_
|
|
#define _BOARD_H_
|
|
|
|
/*
|
|
* Setup for the STMicroelectronics STM3210C-EVAL evaluation board.
|
|
*/
|
|
|
|
#define GPIOD_LED1 7
|
|
#define GPIOD_LED2 13
|
|
#define GPIOD_LED3 3
|
|
#define GPIOD_LED4 4
|
|
|
|
/*
|
|
* Board identifier.
|
|
*/
|
|
#define BOARD_ST_STM3210C_EVAL
|
|
#define BOARD_NAME "ST STM3210C-EVAL"
|
|
|
|
/*
|
|
* Board frequencies.
|
|
*/
|
|
#define STM32_LSECLK 32768
|
|
#define STM32_HSECLK 25000000
|
|
|
|
/*
|
|
* MCU type, supported types are defined in ./os/hal/platforms/hal_lld.h.
|
|
*/
|
|
#define STM32F10X_CL
|
|
|
|
/*
|
|
* IO pins assignments.
|
|
* *********************TO BE COMPLETED*********************
|
|
*/
|
|
|
|
/*
|
|
* I/O ports initial setup, this configuration is established soon after reset
|
|
* in the initialization code.
|
|
*
|
|
* The digits have the following meaning:
|
|
* 0 - Analog input.
|
|
* 1 - Push Pull output 10MHz.
|
|
* 2 - Push Pull output 2MHz.
|
|
* 3 - Push Pull output 50MHz.
|
|
* 4 - Digital input.
|
|
* 5 - Open Drain output 10MHz.
|
|
* 6 - Open Drain output 2MHz.
|
|
* 7 - Open Drain output 50MHz.
|
|
* 8 - Digital input with PullUp or PullDown resistor depending on ODR.
|
|
* 9 - Alternate Push Pull output 10MHz.
|
|
* A - Alternate Push Pull output 2MHz.
|
|
* B - Alternate Push Pull output 50MHz.
|
|
* C - Reserved.
|
|
* D - Alternate Open Drain output 10MHz.
|
|
* E - Alternate Open Drain output 2MHz.
|
|
* F - Alternate Open Drain output 50MHz.
|
|
* Please refer to the STM32 Reference Manual for details.
|
|
*/
|
|
|
|
/*
|
|
* Port A setup.
|
|
* Everything input except:
|
|
*/
|
|
#define VAL_GPIOACRL 0x44444444 /* PA7...PA0 */
|
|
#define VAL_GPIOACRH 0x44444444 /* PA15...PA8 */
|
|
#define VAL_GPIOAODR 0xFFFFFFFF
|
|
|
|
/*
|
|
* Port B setup.
|
|
* Everything input except:
|
|
*/
|
|
#define VAL_GPIOBCRL 0x44444444 /* PB7...PB0 */
|
|
#define VAL_GPIOBCRH 0x44444444 /* PB15...PB8 */
|
|
#define VAL_GPIOBODR 0xFFFFFFFF
|
|
|
|
/*
|
|
* Port C setup.
|
|
* Everything input except:
|
|
*/
|
|
#define VAL_GPIOCCRL 0x44444444 /* PC7...PC0 */
|
|
#define VAL_GPIOCCRH 0x44444444 /* PC15...PC8 */
|
|
#define VAL_GPIOCODR 0xFFFFFFFF
|
|
|
|
/*
|
|
* Port D setup.
|
|
* Everything input except:
|
|
* PD5 - USART2TX (remapped) AF PP Output
|
|
* PD6 - USART2RX (remapped) Digital Input
|
|
* PD7 - LED (LD1) PP Output
|
|
*/
|
|
#define VAL_GPIODCRL 0x34B33444 /* PD7...PD0 */
|
|
#define VAL_GPIODCRH 0x44344444 /* PD15...PD8 */
|
|
#define VAL_GPIODODR 0x0000DF67
|
|
|
|
/*
|
|
* Port E setup.
|
|
* Everything input except:
|
|
*/
|
|
#define VAL_GPIOECRL 0x44444444 /* PE7...PE0 */
|
|
#define VAL_GPIOECRH 0x44344444 /* PE15...PE8 */
|
|
#define VAL_GPIOEODR 0xFFFFFFFF
|
|
|
|
#if !defined(_FROM_ASM_)
|
|
#ifdef __cplusplus
|
|
extern "C" {
|
|
#endif
|
|
void boardInit(void);
|
|
#ifdef __cplusplus
|
|
}
|
|
#endif
|
|
#endif /* _FROM_ASM_ */
|
|
|
|
#endif /* _BOARD_H_ */
|