mirror of
https://github.com/eried/portapack-mayhem.git
synced 2024-12-28 00:39:44 -05:00
210ec9dd1b
Added a PRESETS.TXT file (inside /LOOKINGGLASS folder). Also optimized the way the spectrum signal is integrated into the cascade. Added provision for ranges lower than 240MHz but I am afraid that at this time it will not be advisable to lower ranges any more than 240MHz, since some artifacts and frequency running - moving out of place- occurs. I can only hope that someone with a better understanding of hackrf's inner code can fix this issue and perhaps enhance the scanning speed. I found some "original commenting" inside the code: // TODO: Move more low-level radio control stuff to M4. It'll enable tighter // synchronization for things like wideband (sweeping) spectrum analysis, and // protocols that need quick RX/TX turn-around. Which makes me think that there are things "missing" from the portapack side of the code, for allowing serious speed sweeping. So I am concluding that with current "portapack framework" this might be "the best possible thing". It is to be noted that the "new" internal sweep mode code is signed by: * Copyright 2016 Mike Walters, Dominic Spill * * This file is part of HackRF. Maybe Mike or Dominic can be contacted and hopefully lend a hand on enhancing this code.
11 lines
283 B
Plaintext
11 lines
283 B
Plaintext
# INI,END,DESCRIPTION
|
|
# (Freq range in MHz, min separation 240MHz)
|
|
# (Description up to 20 char)
|
|
# (fields comma delimiter)
|
|
260,500,315/433 MHz KEYFOBS
|
|
2320,2560,BL / WIFI 2.4GHz
|
|
5160,5900,WIFI 5GHz
|
|
10,7250,FULL RANGE
|
|
140,380,VHF MICS AND MARINE
|
|
390,420,RADIOSONDES
|
|
420,660,UHF MICS |