Git-Mirrors/portapack-mayhem
1
0
Fork 0
mirror of https://github.com/eried/portapack-mayhem.git synced 2024-10-01 01:26:06 -04:00
Code Issues Packages Projects Releases Wiki Activity
909b00bdae
portapack-mayhem/firmware/application/apps/ui_mictx.cpp
Brumi-2021 c867f98117 Add Separated/common freq control in Mic App
2023-04-04 17:26:45 +02:00

668 lines
24 KiB
C++
Raw Blame History

This file contains ambiguous Unicode characters

This file contains Unicode characters that might be confused with other characters. If you think that this is intentional, you can safely ignore this warning. Use the Escape button to reveal them.

/*
* Copyright (C) 2015 Jared Boone, ShareBrained Technology, Inc.
* Copyright (C) 2016 Furrtek
*
* This file is part of PortaPack.
*
* This program is free software; you can redistribute it and/or modify
* it under the terms of the GNU General Public License as published by
* the Free Software Foundation; either version 2, or (at your option)
* any later version.
*
* This program is distributed in the hope that it will be useful,
* but WITHOUT ANY WARRANTY; without even the implied warranty of
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
* GNU General Public License for more details.
*
* You should have received a copy of the GNU General Public License
* along with this program; see the file COPYING. If not, write to
* the Free Software Foundation, Inc., 51 Franklin Street,
* Boston, MA 02110-1301, USA.
*/
#include "ui_mictx.hpp"
#include "baseband_api.hpp"
#include "audio.hpp"
#include "wm8731.hpp"
using wolfson::wm8731::WM8731;
#include "tonesets.hpp"
#include "portapack_hal.hpp"
#include "cpld_update.hpp"
#include "string_format.hpp"
#include "irq_controls.hpp"
#include <cstring>
using namespace tonekey;
using namespace portapack;
WM8731 audio_codec_wm8731 { i2c0, 0x1a };
namespace ui {
void MicTXView::focus() {
switch(focused_ui) {
case 0:
field_frequency.focus();
break;
case 1:
field_rxfrequency.focus();
break;
default:
field_va.focus();
break;
}
}
void MicTXView::update_vumeter() {
vumeter.set_value(audio_level);
}
void MicTXView::on_tx_progress(const bool done) {
// Roger beep played, stop transmitting
if (done)
set_tx(false);
}
void MicTXView::configure_baseband() {
baseband::set_audiotx_config(
sampling_rate / 20, // Update vu-meter at 20Hz
transmitting ? transmitter_model.channel_bandwidth() : 0,
mic_gain,
shift_bits_s16, // to be used in dsp_modulate
TONES_F2D(tone_key_frequency(tone_key_index), sampling_rate),
enable_am,
enable_dsb,
enable_usb,
enable_lsb
);
}
void MicTXView::set_tx(bool enable) {
if (enable) {
if (rx_enabled) //If audio RX is enabled
rxaudio(false); //Then turn off audio RX
transmitting = true;
configure_baseband();
transmitter_model.set_tuning_frequency(tx_frequency);
transmitter_model.set_tx_gain(tx_gain);
transmitter_model.set_rf_amp(rf_amp);
transmitter_model.enable();
portapack::pin_i2s0_rx_sda.mode(3); // This is already done in audio::init but gets changed by the CPLD overlay reprogramming
} else {
if (transmitting && rogerbeep_enabled) {
baseband::request_beep(); //Transmit the roger beep
transmitting = false; //And flag the end of the transmission so ...
} else { // (if roger beep was enabled, this will be executed after the beep ends transmitting.
transmitting = false;
configure_baseband();
transmitter_model.disable();
if (rx_enabled) //If audio RX is enabled and we've been transmitting
rxaudio(true); //Turn back on audio RX
}
}
}
void MicTXView::do_timing() {
if (va_enabled) {
if (!transmitting) {
// Attack
if (audio_level >= va_level) {
if ((attack_timer >> 8) >= attack_ms) {
decay_timer = 0;
attack_timer = 0;
set_tx(true);
} else {
attack_timer += lcd_frame_duration;
}
} else {
attack_timer = 0;
}
} else {
// Decay
if (audio_level < va_level) {
if ((decay_timer >> 8) >= decay_ms) {
decay_timer = 0;
attack_timer = 0;
set_tx(false);
} else {
decay_timer += lcd_frame_duration;
}
} else {
decay_timer = 0;
}
}
} else {
// Check for PTT release
const auto switches_state = get_switches_state();
if (!switches_state[4] && transmitting && !button_touch) // Select button
set_tx(false);
}
}
/* Hmmmm. Maybe useless now.
void MicTXView::on_tuning_frequency_changed(rf::Frequency f) {
transmitter_model.set_tuning_frequency(f);
//if ( rx_enabled )
receiver_model.set_tuning_frequency(f); //Update freq also for RX
}
*/
void MicTXView::rxaudio(bool is_on) {
if (is_on) {
audio::input::stop();
baseband::shutdown();
if (enable_am || enable_usb || enable_lsb || enable_dsb) { // "NFM/FM",0 ," WFM ",1 , " AM ",2, " USB ", 3, " LSB ",4, " DSB-SC", 5
baseband::run_image(portapack::spi_flash::image_tag_am_audio);
receiver_model.set_modulation(ReceiverModel::Mode::AMAudio); // that AM demodulation engine is common to all Amplitude mod : AM/USB/LSB/DSB (2,3,4,5)
if (options_mode.selected_index() < 5) // We will be called here with 2,3,4,5 . We treat here demod. filter 2,3,4; (excluding DSB-C case (5) it is treated more down).
receiver_model.set_am_configuration(options_mode.selected_index() - 1); // selecting proper filter(2,3,4). 2-1=1=>6k-AM(1) , 3-1=2=>+3k-USB(2), 4-1=3=>-3K-LSB(3),
}
else { // We are in NFM/FM or WFM (NFM BW:8k5 or 11k / FM BW 16k / WFM BW:200k)
if (enable_wfm) { // WFM , BW 200Khz aprox ,
baseband::run_image(portapack::spi_flash::image_tag_wfm_audio);
receiver_model.set_modulation(ReceiverModel::Mode::WidebandFMAudio);
receiver_model.set_wfm_configuration(0); // there are only 1 x config filters 200k WFM . (not like 8k5/11k/16k)
} else { // NFM BW:8k5 or 11k / FM BW 16k
baseband::run_image(portapack::spi_flash::image_tag_nfm_audio);
receiver_model.set_modulation(ReceiverModel::Mode::NarrowbandFMAudio); //
// receiver_model.set_nbfm_configuration(n); is called above , depending 8k5, 11k, 16k
}
}
receiver_model.set_sampling_rate(3072000);
receiver_model.set_baseband_bandwidth(1750000);
// receiver_model.set_tuning_frequency(field_frequency.value()); //probably this too can be commented out.
if (bool_same_F_tx_rx_enabled) // when stop TX ,define to which freq RX we return
receiver_model.set_tuning_frequency(tx_frequency); // Update freq also for RX = TX
else
receiver_model.set_tuning_frequency(rx_frequency); // Now with seperate freq controls!
receiver_model.set_lna(rx_lna);
receiver_model.set_vga(rx_vga);
receiver_model.set_rf_amp(rx_amp);
receiver_model.enable();
hackrf::cpld::load_sram_no_verify(); // to have a good RX without any ghost inside Mic App
audio::output::start();
} else { //These incredibly convoluted steps are required for the vumeter to reappear when stopping RX.
receiver_model.set_modulation(ReceiverModel::Mode::NarrowbandFMAudio); //This fixes something with AM RX...
receiver_model.disable();
baseband::shutdown();
baseband::run_image(portapack::spi_flash::image_tag_mic_tx);
audio::output::stop();
audio::input::start(ak4951_alc_and_wm8731_boost_GUI); // When detected AK4951 => set up ALC mode; when detected WM8731 => set up mic_boost ON/OFF.
portapack::pin_i2s0_rx_sda.mode(3);
configure_baseband();
}
}
void MicTXView::on_headphone_volume_changed(int32_t v) {
//if (rx_enabled) {
const auto new_volume = volume_t::decibel(v - 99) + audio::headphone::volume_range().max;
receiver_model.set_headphone_volume(new_volume);
//}
}
void MicTXView::set_ptt_visibility(bool v) {
tx_button.hidden(!v);
}
MicTXView::MicTXView(
NavigationView& nav
)
{
portapack::pin_i2s0_rx_sda.mode(3); // This is already done in audio::init but gets changed by the CPLD overlay reprogramming
baseband::run_image(portapack::spi_flash::image_tag_mic_tx);
if (audio::debug::codec_name() =="WM8731" ) {
add_children({
&labels_WM8731, // we have audio codec WM8731, same MIC menu as original.
&vumeter,
&options_gain, // MIC GAIN float factor on the GUI.
&options_wm8731_boost_mode,
// &check_va,
&field_va,
&field_va_level,
&field_va_attack,
&field_va_decay,
&field_bw,
&field_rfgain,
&field_rfamp,
&options_mode,
&field_frequency,
&options_tone_key,
&check_rogerbeep,
&check_common_freq_tx_rx, // added to handle common or separate freq- TX/RX
&check_rxactive,
&field_volume,
&field_rxbw,
&field_squelch,
&field_rxfrequency,
&field_rxlna,
&field_rxvga,
&field_rxamp,
&tx_button
});
} else {
add_children({
&labels_AK4951, // we have audio codec AK4951, enable Automatic Level Control
&vumeter,
&options_gain,
&options_ak4951_alc_mode,
// &check_va,
&field_va,
&field_va_level,
&field_va_attack,
&field_va_decay,
&field_bw,
&field_rfgain,
&field_rfamp,
&options_mode,
&field_frequency,
&options_tone_key,
&check_rogerbeep,
&check_common_freq_tx_rx, // added to handle common or separate freq- TX/RX
&check_rxactive,
&field_volume,
&field_rxbw,
&field_squelch,
&field_rxfrequency,
&field_rxlna,
&field_rxvga,
&field_rxamp,
&tx_button
});
}
tone_keys_populate(options_tone_key);
options_tone_key.on_change = [this](size_t i, int32_t) {
tone_key_index = i;
};
options_tone_key.set_selected_index(0);
options_gain.on_change = [this](size_t, int32_t v) {
mic_gain = v / 10.0;
configure_baseband();
};
options_gain.set_selected_index(1); // x1.0 preselected default.
if (audio::debug::codec_name() =="WM8731") {
options_wm8731_boost_mode.on_change = [this](size_t, int8_t v) {
switch(v) {
case 0: // +12 dB’s respect reference level orig fw 1.5.x fw FM : when +20dB's boost ON) and shift bits (>>8),
shift_bits_s16 = 6; // now mic-boost on (+20dBs) and shift bits (>>6), +20+12=32 dB’s (orig fw +20 dBs+ 0dBs)=> +12dB's respect ref.
break;
case 1: // +06 dB’s reference level , (when +20dB's boost ON)
shift_bits_s16 = 7; // now mic-boost on (+20dBs) and shift bits (>>7), +20+06=26 dB’s (orig fw +20 dBs+ 0dBs) => +06dB's respect ref.
break;
case 2:
shift_bits_s16 = 4; // +04 dB’s respect ref level , (when +20dB's boost OFF)
break; // now mic-boost off (+00dBs) shift bits (4) (+0+24dB's)=24 dBs => +04dB's respect ref.
case 3:
shift_bits_s16 = 5; // -02 dB’s respect ref level , (when +20dB's boost OFF)
break; // now mic-boost off (+00dBs) shift bits (5) (+0+18dB's)=18 dBs => -02dB's respect ref.
case 4:
shift_bits_s16 = 6; // -08 dB’s respect ref level , (when +20dB's boost OFF)
break; // now mic-boost off (+00dBs) shift bits (6) (+0+12dB's)=12 dBs => -08dB's respect ref.
}
ak4951_alc_and_wm8731_boost_GUI = v; // 0,..4 WM8731_boost dB's options, (combination boost on/off , and effective gain in captured data >>x)
audio::input::start(ak4951_alc_and_wm8731_boost_GUI); // Detected (WM8731) , set up the proper wm_boost on/off , 0..4 (0,1) boost_on , (2,3,4) boost_0ff
configure_baseband(); // to update in real timme,sending msg , var-parameters >>shift_bits FM msg ,to audio_tx from M0 to M4 Proc -
};
options_wm8731_boost_mode.set_selected_index(3); // preset GUI index 3 as default WM -> -02 dB's .
} else {
shift_bits_s16 = 8; // Initialized default fixed >>8_FM for FM tx mod , shift audio data for AK4951 ,using top 8 bits s16 data (>>8)
options_ak4951_alc_mode.on_change = [this](size_t, int8_t v) {
ak4951_alc_and_wm8731_boost_GUI = v; // 0,..11, AK4951 Mic -Automatic volume Level Control options,
audio::input::start(ak4951_alc_and_wm8731_boost_GUI); // Detected (AK4951) ==> Set up proper ALC mode from 0..11 options
configure_baseband(); // sending fixed >>8_FM , var-parameters msg , to audiotx from this M0 to M4 process.
};
}
// options_ak4951_alc_mode.set_selected_index(0);
tx_frequency = transmitter_model.tuning_frequency();
field_frequency.set_value(transmitter_model.tuning_frequency());
field_frequency.set_step(receiver_model.frequency_step());
field_frequency.on_change = [this](rf::Frequency f) {
tx_frequency = f;
if(!rx_enabled) { // not activated receiver. just update freq TX
transmitter_model.set_tuning_frequency(f);
} else { // activated receiver.
if (bool_same_F_tx_rx_enabled) // user selected common freq- TX = RX
receiver_model.set_tuning_frequency(f); //Update common freq also for RX
}
};
field_frequency.on_edit = [this, &nav]() {
focused_ui = 0;
// TODO: Provide separate modal method/scheme?
auto new_view = nav.push<FrequencyKeypadView>(tx_frequency);
new_view->on_changed = [this](rf::Frequency f) {
tx_frequency = f;
if(!rx_enabled) {
transmitter_model.set_tuning_frequency(f);
} else {
if (bool_same_F_tx_rx_enabled)
receiver_model.set_tuning_frequency(f); //Update freq also for RX
}
this->field_frequency.set_value(f);
set_dirty();
};
};
field_bw.on_change = [this](uint32_t v) {
transmitter_model.set_channel_bandwidth(v * 1000);
};
field_bw.set_value(10); // pre-default first time, TX deviation FM for NFM / FM
tx_gain = transmitter_model.tx_gain();
field_rfgain.on_change = [this](int32_t v) {
tx_gain = v;
};
field_rfgain.set_value(tx_gain);
rf_amp = transmitter_model.rf_amp();
field_rfamp.on_change = [this](int32_t v) {
rf_amp = (bool)v;
};
field_rfamp.set_value(rf_amp ? 14 : 0);
options_mode.on_change = [this](size_t, int32_t v) { //{ "NFM/FM", 0 }, { " WFM ", 1 },{ "AM", 2 },{ "USB", 3 },{ "LSB", 4 },{ "DSB", 5 }
enable_am = false;
enable_usb = false;
enable_lsb = false;
enable_dsb = false;
enable_wfm = false;
using option_t = std::pair<std::string, int32_t>;
using options_t = std::vector<option_t>;
options_t rxbw; // Aux structure to change dynamically field_rxbw contents,
switch(v) {
case 0: //{ "FM", 0 }
enable_am = false;
enable_usb = false;
enable_lsb = false;
enable_dsb = false;
field_bw.set_value(10); // pre-default deviation FM for WFM
// field_bw.set_value(transmitter_model.channel_bandwidth() / 1000);
//if (rx_enabled)
rxaudio(rx_enabled); //Update now if we have RX audio on
options_tone_key.hidden(0); // we are in FM mode , we should have active the Key-tones & CTCSS option.
rxbw.emplace_back(" NFM1:8k5 ", 0); // restore the original dynamic field_rxbw value.
rxbw.emplace_back(" NFM2:11k ", 1);
rxbw.emplace_back(" FM :16k ", 2);
field_rxbw.set_options(rxbw); // store that aux GUI option to the field_rxbw.
field_rxbw.hidden(0); // we are in FM mode, we need to allow the user set up of the RX NFM BW selection (8K5, 11K, 16K)
field_bw.hidden(0); // we are in FM mode, we need to allow FM deviation parameter , in non FM mode.
break;
case 1: //{ "WFM", 1 }
enable_am = false;
enable_usb = false;
enable_lsb = false;
enable_dsb = false;
enable_wfm = true;
field_bw.set_value(75); // pre-default deviation FM for WFM
// field_bw.set_value(transmitter_model.channel_bandwidth() / 1000);
//if (rx_enabled)
rxaudio(rx_enabled); //Update now if we have RX audio on
options_tone_key.hidden(0); // we are in WFM mode , we should have active the Key-tones & CTCSS option.
rxbw.emplace_back(" 200k-WFM ", 0); // locked a fixed option , to display it .
field_rxbw.set_options(rxbw); // store that aux GUI option to the field_rxbw.
field_rxbw.hidden(0); // we are in WFM mode, we need to show to the user the selected BW WFM filer .
field_bw.hidden(0); // we are in WFM mode, we need to allow WFM deviation parameter , in non FM mode.
break;
case 2: //{ "AM", 2 }
enable_am = true;
rxaudio(rx_enabled); //Update now if we have RX audio on
options_tone_key.set_selected_index(0); // we are NOT in FM mode , we reset the possible previous key-tones &CTCSS selection.
set_dirty(); // Refresh display
options_tone_key.hidden(1); // we hide that Key-tones & CTCSS input selecction, (no meaning in AM/DSB/SSB).
rxbw.emplace_back(" DSB1-9k ", 0); // we offer in AM DSB two audio BW 9k / 6k .
rxbw.emplace_back(" DSB2-6k ", 1);
field_rxbw.set_options(rxbw); // store that aux GUI option to the field_rxbw.
field_rxbw.hidden(0); // we show fixed RX AM BW 6Khz
field_bw.hidden(1); // we hide the FM TX deviation parameter , in non FM mode.
check_rogerbeep.hidden(0); // make visible again the "rogerbeep" selection.
break;
case 3: //{ "USB", 3 }
enable_usb = true;
rxaudio(rx_enabled); //Update now if we have RX audio on
check_rogerbeep.set_value(false); // reset the possible activation of roger beep, because it is not compatible with SSB , by now.
check_rogerbeep.hidden(1); // hide that roger beep selection.
rxbw.emplace_back(" USB+3k ", 0); // locked a fixed option , to display it .
field_rxbw.set_options(rxbw); // store that aux GUI option to the field_rxbw.
set_dirty(); // Refresh display
break;
case 4: //{ "LSB", 4 }
enable_lsb = true;
rxaudio(rx_enabled); //Update now if we have RX audio on
check_rogerbeep.set_value(false); // reset the possible activation of roger beep, because it is not compatible with SSB , by now.
check_rogerbeep.hidden(1); // hide that roger beep selection.
rxbw.emplace_back(" LSB-3k ", 0); // locked a fixed option , to display it .
field_rxbw.set_options(rxbw); // store that aux GUI option to the field_rxbw.
set_dirty(); // Refresh display
break;
case 5: //{ "DSB-SC", 5 }
enable_dsb = true;
rxaudio(rx_enabled); //Update now if we have RX audio on
check_rogerbeep.hidden(0); // make visible again the "rogerbeep" selection.
rxbw.emplace_back("SSB1:USB+3k", 0); // added dynamically two options (index 0,1) to that DSB-C case to the field_rxbw value.
rxbw.emplace_back("SSB2:LSB-3k", 1);
field_rxbw.set_options(rxbw); // store that aux GUI option to the field_rxbw.
break;
}
//configure_baseband();
};
/*
check_va.on_select = [this](Checkbox&, bool v) {
va_enabled = v;
text_ptt.hidden(v); //hide / show PTT text
check_rxactive.hidden(v); //hide / show the RX AUDIO
set_dirty(); //Refresh display
};
*/
field_va.set_selected_index(1);
field_va.on_change = [this](size_t, int32_t v) {
switch(v) {
case 0:
va_enabled = 0;
this->set_ptt_visibility(0);
check_rxactive.hidden(0);
ptt_enabled = 0;
break;
case 1:
va_enabled = 0;
this->set_ptt_visibility(1);
check_rxactive.hidden(0);
ptt_enabled = 1;
break;
case 2:
if (!rx_enabled) {
va_enabled = 1;
this->set_ptt_visibility(0);
check_rxactive.hidden(1);
ptt_enabled = 0;
} else {
field_va.set_selected_index(1);
}
break;
}
set_dirty();
};
check_rogerbeep.on_select = [this](Checkbox&, bool v) {
rogerbeep_enabled = v;
};
check_common_freq_tx_rx.on_select = [this](Checkbox&, bool v) {
bool_same_F_tx_rx_enabled = v;
field_rxfrequency.hidden(v); //Hide or show separated freq RX field . (When no hide user can enter down indep. freq for RX)
set_dirty(); //Refresh GUI interface
receiver_model.set_tuning_frequency(v ? tx_frequency : rx_frequency); // To go to the proper tuned freq. when toggling it
};
field_va_level.on_change = [this](int32_t v) {
va_level = v;
vumeter.set_mark(v);
};
field_va_level.set_value(40);
field_va_attack.on_change = [this](int32_t v) {
attack_ms = v;
};
field_va_attack.set_value(500);
field_va_decay.on_change = [this](int32_t v) {
decay_ms = v;
};
field_va_decay.set_value(1000);
check_rxactive.on_select = [this](Checkbox&, bool v) {
// vumeter.set_value(0); //Start with a clean vumeter
rx_enabled = v;
// check_va.hidden(v); //Hide or show voice activation
rxaudio(v); //Activate-Deactivate audio rx accordingly
set_dirty(); //Refresh interface
};
field_volume.set_value((receiver_model.headphone_volume() - audio::headphone::volume_range().max).decibel() + 99);
field_volume.on_change = [this](int32_t v) { this->on_headphone_volume_changed(v); };
field_rxbw.on_change = [this](size_t, int32_t v) {
if (!(enable_am || enable_usb || enable_lsb || enable_dsb || enable_wfm )) {
// In Previous fw versions, that nbfm_configuration(n) was done in any mode (FM/AM/SSB/DSB)...strictly speaking only need it in (NFM/FM)
receiver_model.set_nbfm_configuration(v ); // we are in NFM/FM case, we need to select proper NFM/FM RX channel filter , NFM BW 8K5(0), NFM BW 11K(1) , FM BW 16K (2)
}
else { // we are not in NFM/FM mode .(we could be in any of the rest : AM /USB/LSB/DSB-SC)
if (enable_am) { // we are in AM TX mode , we will allow both independent RX audio BW : AM 9K (9K00AE3 / AM 6K (6K00AE3). (In AM option v can be 0 (9k) , 1 (6k)
receiver_model.set_am_configuration(v ); // we are in AM TX mode , we need to select proper AM full path config AM-9K filter. 0+0 =>AM-9K(0), 0+1=1 =>AM-6K(1),
}
if (enable_dsb) { // we are in DSB-SC in TX mode , we will allow both independent RX SSB demodulation (USB / LSB side band). in that submenu, v is 0 (SSB1 USB) or 1 (SSB2 LSB)
receiver_model.set_am_configuration(v +2 ); // we are in DSB-SC TX mode , we need to select proper SSB filter. 0+2 =>usb(2), 1+2=3 =>lsb(3),
}
}
};
field_squelch.on_change = [this](int32_t v) {
receiver_model.set_squelch_level(100 - v);
};
field_squelch.set_value(0);
receiver_model.set_squelch_level(0);
rx_frequency = receiver_model.tuning_frequency();
field_rxfrequency.set_value(rx_frequency);
field_rxfrequency.set_step(receiver_model.frequency_step());
field_rxfrequency.on_change = [this](rf::Frequency f) { // available when field rxfrequency not hidden => user selected separated freq RX/TX-
rx_frequency = f;
if(rx_enabled)
receiver_model.set_tuning_frequency(f);
};
field_rxfrequency.on_edit = [this, &nav]() { // available when field rxfrequency not hidden => user selected separated freq RX/TX-
focused_ui = 1;
// TODO: Provide separate modal method/scheme?
auto new_view = nav.push<FrequencyKeypadView>(rx_frequency);
new_view->on_changed = [this](rf::Frequency f) {
rx_frequency = f;
if(rx_enabled)
receiver_model.set_tuning_frequency(f);
this->field_rxfrequency.set_value(f);
set_dirty();
};
};
rx_lna = receiver_model.lna();
field_rxlna.on_change = [this](int32_t v) {
rx_lna = v;
if(rx_enabled)
receiver_model.set_lna(v);
};
field_rxlna.set_value(rx_lna);
rx_vga = receiver_model.vga();
field_rxvga.on_change = [this](int32_t v) {
rx_vga = v;
if(rx_enabled)
receiver_model.set_vga(v);
};
field_rxvga.set_value(rx_vga);
rx_amp = receiver_model.rf_amp();
field_rxamp.on_change = [this](int32_t v) {
rx_amp = v;
if(rx_enabled)
receiver_model.set_rf_amp(rx_amp);
};
field_rxamp.set_value(rx_amp);
tx_button.on_select = [this](Button&) {
if(ptt_enabled && !transmitting) {
set_tx(true);
}
};
tx_button.on_touch_release = [this](Button&) {
if(button_touch) {
button_touch = false;
set_tx(false);
}
};
tx_button.on_touch_press = [this](Button&) {
if(!transmitting) {
button_touch = true;
}
};
transmitter_model.set_sampling_rate(sampling_rate);
transmitter_model.set_baseband_bandwidth(1750000);
set_tx(false);
audio::set_rate(audio::Rate::Hz_24000);
audio::input::start(ak4951_alc_and_wm8731_boost_GUI); // When detected AK4951 => set up ALC mode; when detected WM8731 => set up mic_boost ON/OFF.
}
MicTXView::~MicTXView() {
audio::input::stop();
transmitter_model.set_tuning_frequency(tx_frequency); // Save Tx frequency instead of Rx. Or maybe we need some "System Wide" changes to seperate Tx and Rx frequency.
transmitter_model.disable();
if (rx_enabled) //Also turn off audio rx if enabled
rxaudio(false);
hackrf::cpld::load_sram_no_verify(); // to leave all RX ok, without ghost signal problem at the exit .
baseband::shutdown(); // better this function at the end, not load_sram() that sometimes produces hang up.
}
}
Reference in New Issue View Git Blame Copy Permalink