mirror of
https://github.com/eried/portapack-mayhem.git
synced 2024-12-21 21:45:04 -05:00
83b65ba6ce
* message on dev list change * dc detect * added sht3x sensor. * separete environment data from light * max17055 moved to i2c dev * sht fix, goterror detection fix * fix ext sensor app display for a lot of devices. * added bh1750 driver * autoscan on main view * added devlist mutex * better timing * fix h2 sw8 on poweron by usb
325 lines
10 KiB
C++
325 lines
10 KiB
C++
/*
|
|
* Copyright (C) 2024 jLynx.
|
|
*
|
|
* This file is part of PortaPack.
|
|
*
|
|
* This program is free software; you can redistribute it and/or modify
|
|
* it under the terms of the GNU General Public License as published by
|
|
* the Free Software Foundation; either version 2, or (at your option)
|
|
* any later version.
|
|
*
|
|
* This program is distributed in the hope that it will be useful,
|
|
* but WITHOUT ANY WARRANTY; without even the implied warranty of
|
|
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
|
|
* GNU General Public License for more details.
|
|
*
|
|
* You should have received a copy of the GNU General Public License
|
|
* along with this program; see the file COPYING. If not, write to
|
|
* the Free Software Foundation, Inc., 51 Franklin Street,
|
|
* Boston, MA 02110-1301, USA.
|
|
*/
|
|
|
|
#ifndef __MAX17055_H__
|
|
#define __MAX17055_H__
|
|
|
|
#include <cstdint>
|
|
#include <array>
|
|
#include <string>
|
|
#include "battery.hpp"
|
|
|
|
#include "i2cdevmanager.hpp"
|
|
|
|
#define MAX17055_POR 0
|
|
#define MAX17055_IMin 1
|
|
#define MAX17055_IMax 2
|
|
#define MAX17055_VMin 3
|
|
#define MAX17055_VMax 4
|
|
#define MAX17055_TMin 5
|
|
#define MAX17055_TMax 6
|
|
#define MAX17055_SOC_Min 7
|
|
#define MAX17055_SOC_Max 8
|
|
#define MAX17055_SOC_Change 9
|
|
#define MAX17055_Bat_Status 10
|
|
#define MAX17055_Bat_Insert 11
|
|
#define MAX17055_Bat_Remove 12
|
|
|
|
// Design Parameters
|
|
//----------------------------------------------
|
|
|
|
// Define Battery Capacity
|
|
#ifndef __MAX17055_Design_Capacity__
|
|
#define __MAX17055_Design_Capacity__ BATTERY_DESIGN_CAP // Battery Capacity
|
|
#endif
|
|
|
|
// Define Gauge Resistor
|
|
#ifndef __MAX17055_Resistor__
|
|
#define __MAX17055_Resistor__ 0.01 // Shunt Resistor
|
|
#endif
|
|
|
|
// Define Minimum Voltage
|
|
#ifndef __MAX17055_Min_Voltage__
|
|
#define __MAX17055_Min_Voltage__ BATTERY_MIN_VOLTAGE / 1000.0 // Minimum Voltage
|
|
#endif
|
|
|
|
// Define Maximum Voltage
|
|
#ifndef __MAX17055_Max_Voltage__
|
|
#define __MAX17055_Max_Voltage__ BATTERY_MAX_VOLTAGE / 1000.0 // Maximum Voltage
|
|
#endif
|
|
|
|
// Define Empty Voltage
|
|
#ifndef __MAX17055_Empty_Voltage__
|
|
#define __MAX17055_Empty_Voltage__ BATTERY_MIN_VOLTAGE / 1000.0 // Empty Voltage
|
|
#endif
|
|
|
|
// Define Recovery Voltage
|
|
#ifndef __MAX17055_Recovery_Voltage__
|
|
#define __MAX17055_Recovery_Voltage__ 3.1 // Recovery Voltage
|
|
#endif
|
|
|
|
// Define Maximum Current
|
|
#ifndef __MAX17055_Max_Current__
|
|
#define __MAX17055_Max_Current__ 3.0 // Maximum Current
|
|
#endif
|
|
|
|
// Define Termination Current
|
|
#ifndef __MAX17055_Termination_Current__
|
|
#define __MAX17055_Termination_Current__ 200 // Termination Current
|
|
#endif
|
|
|
|
// Define Minimum Temperature
|
|
#ifndef __MAX17055_Min_Temperature__
|
|
#define __MAX17055_Min_Temperature__ -20 // Minimum Temperature
|
|
#endif
|
|
|
|
// Define Maximum Temperature
|
|
#ifndef __MAX17055_Max_Temperature__
|
|
#define __MAX17055_Max_Temperature__ 60 // Maximum Temperature
|
|
#endif
|
|
|
|
// Define Battery Model
|
|
#ifndef __MAX17055_Battery_Model__
|
|
#define __MAX17055_Battery_Model__ 0 // Battery Model
|
|
#endif
|
|
|
|
// Define Limits
|
|
//----------------------------------------------
|
|
|
|
// Define Minimum SOC
|
|
#ifndef __MAX17055_Min_SOC__
|
|
#define __MAX17055_Min_SOC__ 0 // Minimum SOC
|
|
#endif
|
|
|
|
// Define Maximum SOC
|
|
#ifndef __MAX17055_Max_SOC__
|
|
#define __MAX17055_Max_SOC__ 100 // Maximum SOC
|
|
#endif
|
|
|
|
// Config1 (0x1D) Configuration
|
|
//----------------------------------------------
|
|
|
|
// Enable alert on battery removal when the IC is mounted host side.
|
|
// When Ber = 1, a battery-removal condition, as detected by the AIN pin voltage, triggers an alert.
|
|
#ifndef MAX17055_Ber
|
|
#define MAX17055_Ber 0
|
|
#endif
|
|
|
|
// Enable alert on battery insertion when the IC is mounted host side.
|
|
// When Bei = 1, a battery-insertion condition, as detected by the AIN pin voltage, triggers an alert.
|
|
#ifndef MAX17055_Bei
|
|
#define MAX17055_Bei 0
|
|
#endif
|
|
|
|
// When Aen = 1, violation of any of the alert threshold register values
|
|
// by temperature, voltage, or SOC triggers an alert. This bit
|
|
// affects the ALRT pin operation only. The Smx, Smn, Tmx,
|
|
// Tmn, Vmx, Vmn, Imx, and Imn bits of the Status register
|
|
// (00h) are not disabled.
|
|
#ifndef MAX17055_Aen
|
|
#define MAX17055_Aen 1
|
|
#endif
|
|
|
|
// This allows the host to control the bias of the thermistor switch or
|
|
// enable fast detection of battery removal. Set FTHRM = 1
|
|
// to always enable the thermistor bias switch. With a standard 10kΩ thermistor,
|
|
// this adds an additional ~200μA to the current drain of the circuit.
|
|
#ifndef MAX17055_FTHRM
|
|
#define MAX17055_FTHRM 0
|
|
#endif
|
|
|
|
// Set to logic 1 to enable the automatic THRM output bias and AIN measurement.
|
|
#ifndef MAX17055_ETHRM
|
|
#define MAX17055_ETHRM 0
|
|
#endif
|
|
|
|
// Set to logic 1 to force the device to enter shutdown mode if both
|
|
// SDA and SCL are held low for more than timeout of the
|
|
// ShdnTimer register.
|
|
#ifndef MAX17055_COMMSH
|
|
#define MAX17055_COMMSH 0
|
|
#endif
|
|
|
|
// Write this bit to logic 1 to force a shutdown of the device after timeout of the ShdnTimer register (default 45s delay).
|
|
#ifndef MAX17055_SHDN
|
|
#define MAX17055_SHDN 0
|
|
#endif
|
|
|
|
// When set to 1, the fuel gauge requires external temperature measurements to be
|
|
// written from the host. When set to 0, the IC's own measurements as used as selected by Config.TSEL.
|
|
#ifndef MAX17055_Tex
|
|
#define MAX17055_Tex 0
|
|
#endif
|
|
|
|
// Set to 1 and set ETHRM or FTHRM to 1 to enable temperature measurements selected by Config.TSel.
|
|
#ifndef MAX17055_Ten
|
|
#define MAX17055_Ten 1
|
|
#endif
|
|
|
|
// Set to 1 to enable device shutdown when the IC is mounted host side and the battery is removed.
|
|
#ifndef MAX17055_AINSH
|
|
#define MAX17055_AINSH 0
|
|
#endif
|
|
|
|
// When IS = 1, current alerts can only be cleared through software. When IS = 0,
|
|
// current alerts are cleared automatically when the thresholdis no longer exceeded.
|
|
#ifndef MAX17055_IS
|
|
#define MAX17055_IS 0
|
|
#endif
|
|
|
|
// When VS = 1, voltage alerts can only be cleared through software. When VS = 0,
|
|
// voltage alerts are cleared automatically when the threshold is no longer exceeded.
|
|
#ifndef MAX17055_VS
|
|
#define MAX17055_VS 0
|
|
#endif
|
|
|
|
// When TS = 1, temperature alerts can only be cleared through software. WhenTS = 0,
|
|
// temperature alerts are cleared automatically whenthe threshold is no longer exceeded.
|
|
#ifndef MAX17055_TS
|
|
#define MAX17055_TS 0
|
|
#endif
|
|
|
|
// When SS = 1, SOC alerts can only be cleared through software. When SS = 0,
|
|
// SOC alerts are cleared automatically when the threshold is no longer exceeded.
|
|
#ifndef MAX17055_SS
|
|
#define MAX17055_SS 0
|
|
#endif
|
|
|
|
// 0 to use internal die temperature. 1 to use temperature information from thermistor.
|
|
// ETHRM bit should be set to 1 when TSel is 1.
|
|
#ifndef MAX17055_TSel
|
|
#define MAX17055_TSel 0
|
|
#endif
|
|
|
|
// Config1 (0xBB) Configuration
|
|
//----------------------------------------------
|
|
|
|
// Set to 1 to enable constant-power mode. If it is set to 0,
|
|
// AtRate/AvgCurrent is used for (At)TTE/(At) QResidual/(At)AvSOC/(At)AvCap.
|
|
#ifndef MAX17055_CPMode
|
|
#define MAX17055_CPMode 0
|
|
#endif
|
|
|
|
// Host sets this bit to 1 in order to initiate firmware to finish processing a newly loaded model.
|
|
// Firmware clears this bit to zero to indicate that model loading is finished.
|
|
#ifndef MAX17055_LDMDL
|
|
#define MAX17055_LDMDL 0
|
|
#endif
|
|
|
|
// Set this bit to 1 to enable temperature based alerts.
|
|
// Write this bit to 0 to disable temperature alerts. This bit is set to 1 at power-up.
|
|
#ifndef MAX17055_TAIrtEN
|
|
#define MAX17055_TAIrtEN 1
|
|
#endif
|
|
|
|
// Set this bit to 1 to enable alert output with the Status.dSOCi bit function.
|
|
// Write this bit to 0 to disable alert output with the Status. dSOCi bit. This bit is set to 0 at power-up.
|
|
#ifndef MAX17055_dSOCen
|
|
#define MAX17055_dSOCen 0
|
|
#endif
|
|
|
|
// When this bit is set to 0, Dynamic Power calculations are disabled and registers
|
|
// MaxPeakPower/SusPeakPower/MPPCurrent/ SPPCurrent can be used as general purpose memory.
|
|
#ifndef MAX17055_DPEn
|
|
#define MAX17055_DPEn 0
|
|
#endif
|
|
|
|
// When this bit is set to 0, AtRate calculations are disabled and registers
|
|
// AtQResidual/AtTTE/AtAvSOC/AtAvCap can be used as general purpose memory.
|
|
#ifndef MAX17055_AtRateEn
|
|
#define MAX17055_AtRateEn 0
|
|
#endif
|
|
|
|
namespace i2cdev {
|
|
|
|
using address_t = uint8_t;
|
|
|
|
class I2cDev_MAX17055 : public I2cDev {
|
|
public:
|
|
struct RegisterEntry {
|
|
const char* name;
|
|
uint8_t address;
|
|
const char* type;
|
|
float scalar;
|
|
bool is_signed;
|
|
const char* unit;
|
|
bool abbr_units;
|
|
int resolution;
|
|
bool is_user;
|
|
bool is_save_restore;
|
|
bool is_nv;
|
|
uint16_t por_data;
|
|
bool is_read_only;
|
|
};
|
|
static const RegisterEntry entries[];
|
|
static constexpr size_t entries_count = 144;
|
|
|
|
uint16_t read_register(const uint8_t reg);
|
|
bool write_register(const uint8_t reg, const uint16_t value);
|
|
|
|
bool init(uint8_t addr_) override;
|
|
void update() override;
|
|
bool detect();
|
|
|
|
void getBatteryInfo(uint8_t& valid_mask, uint8_t& batteryPercentage, uint16_t& voltage, int32_t& current);
|
|
bool reset_learned();
|
|
|
|
float getValue(const char* entityName);
|
|
uint16_t averageMVoltage(void);
|
|
int32_t instantCurrent(void);
|
|
uint16_t stateOfCharge(void);
|
|
|
|
private:
|
|
const RegisterEntry* findEntry(const char* name) const;
|
|
|
|
bool needsInitialization();
|
|
void partialInit();
|
|
|
|
bool statusControl(const uint8_t _Status);
|
|
bool statusClear();
|
|
|
|
bool full_reset_and_init();
|
|
bool soft_reset();
|
|
bool clear_por();
|
|
bool initialize_custom_parameters();
|
|
bool load_custom_parameters();
|
|
|
|
bool setEmptyVoltage(uint16_t _Empty_Voltage);
|
|
bool setRecoveryVoltage(uint16_t _Recovery_Voltage);
|
|
bool setMinVoltage(uint16_t _Minimum_Voltage);
|
|
bool setMaxVoltage(uint16_t _Maximum_Voltage);
|
|
bool setMaxCurrent(uint16_t _Maximum_Current);
|
|
bool setChargeTerminationCurrent(uint16_t _Charge_Termination_Current);
|
|
bool setDesignCapacity(const uint16_t _Capacity);
|
|
bool setFullCapRep(const uint16_t _Capacity);
|
|
bool setFullCapNom(const uint16_t _Capacity);
|
|
bool setRepCap(const uint16_t _Capacity);
|
|
bool setMinSOC(uint8_t _Minimum_SOC);
|
|
bool setMaxSOC(uint8_t _Maximum_SOC);
|
|
bool setMinTemperature(uint8_t _Minimum_Temperature);
|
|
bool setMaxTemperature(uint8_t _Maximum_Temperature);
|
|
bool setModelCfg(const uint8_t _Model_ID);
|
|
bool setHibCFG(const uint16_t _Config);
|
|
void config(void);
|
|
};
|
|
|
|
} /* namespace i2cdev */
|
|
#endif /* __MAX17055_H__ */ |