portapack-mayhem/firmware/chibios/testhal/SPC563Mxx/ADC/mcuconf.h

85 lines
3.6 KiB
C
Executable File

/*
SPC5 HAL - Copyright (C) 2013 STMicroelectronics
Licensed under the Apache License, Version 2.0 (the "License");
you may not use this file except in compliance with the License.
You may obtain a copy of the License at
http://www.apache.org/licenses/LICENSE-2.0
Unless required by applicable law or agreed to in writing, software
distributed under the License is distributed on an "AS IS" BASIS,
WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
See the License for the specific language governing permissions and
limitations under the License.
*/
/*
* SPC563Mxx drivers configuration.
* The following settings override the default settings present in
* the various device driver implementation headers.
* Note that the settings for each driver only have effect if the whole
* driver is enabled in halconf.h.
*
* IRQ priorities:
* 1...15 Lowest...Highest.
*/
#define SPC563Mxx_MCUCONF
/*
* HAL driver system settings.
*/
#define SPC5_NO_INIT FALSE
#define SPC5_CLK_BYPASS FALSE
#define SPC5_ALLOW_OVERCLOCK FALSE
#define SPC5_CLK_PREDIV_VALUE 2
#define SPC5_CLK_MFD_VALUE 80
#define SPC5_CLK_RFD SPC5_RFD_DIV4
#define SPC5_FLASH_BIUCR (BIUCR_BANK1_TOO | \
BIUCR_MASTER4_PREFETCH | \
BIUCR_MASTER0_PREFETCH | \
BIUCR_DPFEN | \
BIUCR_IPFEN | \
BIUCR_PFLIM_ON_MISS | \
BIUCR_BFEN)
/*
* ADC driver settings.
*/
#define SPC5_ADC_USE_ADC0_Q0 TRUE
#define SPC5_ADC_USE_ADC0_Q1 TRUE
#define SPC5_ADC_USE_ADC0_Q2 TRUE
#define SPC5_ADC_USE_ADC1_Q3 TRUE
#define SPC5_ADC_USE_ADC1_Q4 TRUE
#define SPC5_ADC_USE_ADC1_Q5 TRUE
#define SPC5_ADC_FIFO0_DMA_PRIO 12
#define SPC5_ADC_FIFO1_DMA_PRIO 12
#define SPC5_ADC_FIFO2_DMA_PRIO 12
#define SPC5_ADC_FIFO3_DMA_PRIO 12
#define SPC5_ADC_FIFO4_DMA_PRIO 12
#define SPC5_ADC_FIFO5_DMA_PRIO 12
#define SPC5_ADC_FIFO0_DMA_IRQ_PRIO 12
#define SPC5_ADC_FIFO1_DMA_IRQ_PRIO 12
#define SPC5_ADC_FIFO2_DMA_IRQ_PRIO 12
#define SPC5_ADC_FIFO3_DMA_IRQ_PRIO 12
#define SPC5_ADC_FIFO4_DMA_IRQ_PRIO 12
#define SPC5_ADC_FIFO5_DMA_IRQ_PRIO 12
#define SPC5_ADC_CR_CLK_PS ADC_CR_CLK_PS(5)
#define SPC5_ADC_PUDCR {ADC_PUDCR_NONE, \
ADC_PUDCR_NONE, \
ADC_PUDCR_NONE, \
ADC_PUDCR_NONE, \
ADC_PUDCR_NONE, \
ADC_PUDCR_NONE, \
ADC_PUDCR_NONE, \
ADC_PUDCR_NONE}
/*
* SERIAL driver system settings.
*/
#define SPC5_USE_ESCIA TRUE
#define SPC5_USE_ESCIB TRUE
#define SPC5_ESCIA_PRIORITY 8
#define SPC5_ESCIB_PRIORITY 8