portapack-mayhem/firmware/chibios/testhal/STM32F4xx/CAN/main.c

128 lines
3.4 KiB
C
Executable File

/*
ChibiOS/RT - Copyright (C) 2006-2013 Giovanni Di Sirio
Licensed under the Apache License, Version 2.0 (the "License");
you may not use this file except in compliance with the License.
You may obtain a copy of the License at
http://www.apache.org/licenses/LICENSE-2.0
Unless required by applicable law or agreed to in writing, software
distributed under the License is distributed on an "AS IS" BASIS,
WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
See the License for the specific language governing permissions and
limitations under the License.
*/
#include "ch.h"
#include "hal.h"
struct can_instance {
CANDriver *canp;
uint32_t led;
};
static const struct can_instance can1 = {&CAND1, GPIOD_LED5};
static const struct can_instance can2 = {&CAND2, GPIOD_LED3};
/*
* Internal loopback mode, 500KBaud, automatic wakeup, automatic recover
* from abort mode.
* See section 22.7.7 on the STM32 reference manual.
*/
static const CANConfig cancfg = {
CAN_MCR_ABOM | CAN_MCR_AWUM | CAN_MCR_TXFP,
CAN_BTR_LBKM | CAN_BTR_SJW(0) | CAN_BTR_TS2(1) |
CAN_BTR_TS1(8) | CAN_BTR_BRP(6)
};
/*
* Receiver thread.
*/
static WORKING_AREA(can_rx1_wa, 256);
static WORKING_AREA(can_rx2_wa, 256);
static msg_t can_rx(void *p) {
struct can_instance *cip = p;
EventListener el;
CANRxFrame rxmsg;
(void)p;
chRegSetThreadName("receiver");
chEvtRegister(&cip->canp->rxfull_event, &el, 0);
while(!chThdShouldTerminate()) {
if (chEvtWaitAnyTimeout(ALL_EVENTS, MS2ST(100)) == 0)
continue;
while (canReceive(cip->canp, CAN_ANY_MAILBOX,
&rxmsg, TIME_IMMEDIATE) == RDY_OK) {
/* Process message.*/
palTogglePad(GPIOD, cip->led);
}
}
chEvtUnregister(&CAND1.rxfull_event, &el);
return 0;
}
/*
* Transmitter thread.
*/
static WORKING_AREA(can_tx_wa, 256);
static msg_t can_tx(void * p) {
CANTxFrame txmsg;
(void)p;
chRegSetThreadName("transmitter");
txmsg.IDE = CAN_IDE_EXT;
txmsg.EID = 0x01234567;
txmsg.RTR = CAN_RTR_DATA;
txmsg.DLC = 8;
txmsg.data32[0] = 0x55AA55AA;
txmsg.data32[1] = 0x00FF00FF;
while (!chThdShouldTerminate()) {
canTransmit(&CAND1, CAN_ANY_MAILBOX, &txmsg, MS2ST(100));
canTransmit(&CAND2, CAN_ANY_MAILBOX, &txmsg, MS2ST(100));
chThdSleepMilliseconds(500);
}
return 0;
}
/*
* Application entry point.
*/
int main(void) {
/*
* System initializations.
* - HAL initialization, this also initializes the configured device drivers
* and performs the board-specific initializations.
* - Kernel initialization, the main() function becomes a thread and the
* RTOS is active.
*/
halInit();
chSysInit();
/*
* Activates the CAN drivers 1 and 2.
*/
canStart(&CAND1, &cancfg);
canStart(&CAND2, &cancfg);
/*
* Starting the transmitter and receiver threads.
*/
chThdCreateStatic(can_rx1_wa, sizeof(can_rx1_wa), NORMALPRIO + 7,
can_rx, (void *)&can1);
chThdCreateStatic(can_rx2_wa, sizeof(can_rx2_wa), NORMALPRIO + 7,
can_rx, (void *)&can2);
chThdCreateStatic(can_tx_wa, sizeof(can_tx_wa), NORMALPRIO + 7,
can_tx, NULL);
/*
* Normal main() thread activity, in this demo it does nothing.
*/
while (TRUE) {
chThdSleepMilliseconds(500);
}
return 0;
}