portapack-mayhem/firmware/chibios/testhal/STM32F4xx/DMA_STORM/main.c

230 lines
6.9 KiB
C
Executable File

/*
ChibiOS/RT - Copyright (C) 2006-2013 Giovanni Di Sirio
Licensed under the Apache License, Version 2.0 (the "License");
you may not use this file except in compliance with the License.
You may obtain a copy of the License at
http://www.apache.org/licenses/LICENSE-2.0
Unless required by applicable law or agreed to in writing, software
distributed under the License is distributed on an "AS IS" BASIS,
WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
See the License for the specific language governing permissions and
limitations under the License.
*/
#include <string.h>
#include "ch.h"
#include "hal.h"
#define ADC_GRP2_NUM_CHANNELS 8
#define ADC_GRP2_BUF_DEPTH 16
static adcsample_t samples2[ADC_GRP2_NUM_CHANNELS * ADC_GRP2_BUF_DEPTH];
static void adccallback(ADCDriver *adcp, adcsample_t *buffer, size_t n) {
(void)adcp;
(void)buffer;
(void)n;
}
static void adcerrorcallback(ADCDriver *adcp, adcerror_t err) {
(void)adcp;
(void)err;
chSysHalt();
}
/*
* ADC conversion group.
* Mode: Continuous, 16 samples of 8 channels, SW triggered.
* Channels: IN11, IN12, IN11, IN12, IN11, IN12, Sensor, VRef.
*/
static const ADCConversionGroup adcgrpcfg2 = {
TRUE,
ADC_GRP2_NUM_CHANNELS,
adccallback,
adcerrorcallback,
0, /* CR1 */
ADC_CR2_SWSTART, /* CR2 */
ADC_SMPR1_SMP_AN12(ADC_SAMPLE_56) | ADC_SMPR1_SMP_AN11(ADC_SAMPLE_56) |
ADC_SMPR1_SMP_SENSOR(ADC_SAMPLE_144) | ADC_SMPR1_SMP_VREF(ADC_SAMPLE_144),
0, /* SMPR2 */
ADC_SQR1_NUM_CH(ADC_GRP2_NUM_CHANNELS),
ADC_SQR2_SQ8_N(ADC_CHANNEL_SENSOR) | ADC_SQR2_SQ7_N(ADC_CHANNEL_VREFINT),
ADC_SQR3_SQ6_N(ADC_CHANNEL_IN12) | ADC_SQR3_SQ5_N(ADC_CHANNEL_IN11) |
ADC_SQR3_SQ4_N(ADC_CHANNEL_IN12) | ADC_SQR3_SQ3_N(ADC_CHANNEL_IN11) |
ADC_SQR3_SQ2_N(ADC_CHANNEL_IN12) | ADC_SQR3_SQ1_N(ADC_CHANNEL_IN11)
};
/*
* Maximum speed SPI configuration (21MHz, CPHA=0, CPOL=0, MSb first).
*/
static const SPIConfig hs_spicfg = {
NULL,
GPIOB,
12,
0
};
static void tmo(void *p) {
(void)p;
chSysHalt();
}
/*
* SPI thread.
*/
static WORKING_AREA(waSPI1, 1024);
static WORKING_AREA(waSPI2, 1024);
static WORKING_AREA(waSPI3, 1024);
static msg_t spi_thread(void *p) {
unsigned i;
SPIDriver *spip = (SPIDriver *)p;
VirtualTimer vt;
uint8_t txbuf[256];
uint8_t rxbuf[256];
/* Prepare transmit pattern.*/
for (i = 0; i < sizeof(txbuf); i++)
txbuf[i] = (uint8_t)i;
/* Continuous transmission.*/
while (TRUE) {
/* Starts a VT working as watchdog to catch a malfunction in the SPI
driver.*/
chSysLock();
chVTSetI(&vt, MS2ST(10), tmo, NULL);
chSysUnlock();
spiExchange(spip, sizeof(txbuf), txbuf, rxbuf);
/* Stops the watchdog.*/
chSysLock();
if (chVTIsArmedI(&vt))
chVTResetI(&vt);
chSysUnlock();
}
}
/*
* This is a periodic thread that does absolutely nothing except flashing
* a LED.
*/
static WORKING_AREA(waThread1, 128);
static msg_t Thread1(void *arg) {
(void)arg;
chRegSetThreadName("blinker");
while (TRUE) {
palSetPad(GPIOD, GPIOD_LED3); /* Orange. */
chThdSleepMilliseconds(500);
palClearPad(GPIOD, GPIOD_LED3); /* Orange. */
chThdSleepMilliseconds(500);
}
}
/*
* Application entry point.
*/
int main(void) {
unsigned i;
static uint8_t patterns1[4096], patterns2[4096], buf1[4096], buf2[4096];
/* System initializations.
- HAL initialization, this also initializes the configured device drivers
and performs the board-specific initializations.
- Kernel initialization, the main() function becomes a thread and the
RTOS is active.*/
halInit();
chSysInit();
/* Creates the blinker thread.*/
chThdCreateStatic(waThread1, sizeof(waThread1), NORMALPRIO + 10,
Thread1, NULL);
/* Activates the ADC1 driver and the temperature sensor.*/
adcStart(&ADCD1, NULL);
adcSTM32EnableTSVREFE();
/* Starts an ADC continuous conversion.*/
adcStartConversion(&ADCD1, &adcgrpcfg2, samples2, ADC_GRP2_BUF_DEPTH);
/* Activating SPI drivers.*/
spiStart(&SPID1, &hs_spicfg);
spiStart(&SPID2, &hs_spicfg);
spiStart(&SPID3, &hs_spicfg);
/* Starting SPI threads instances.*/
chThdCreateStatic(waSPI1, sizeof(waSPI1), NORMALPRIO + 1, spi_thread, &SPID1);
chThdCreateStatic(waSPI2, sizeof(waSPI2), NORMALPRIO + 1, spi_thread, &SPID2);
chThdCreateStatic(waSPI3, sizeof(waSPI3), NORMALPRIO + 1, spi_thread, &SPID3);
/* Allocating two DMA2 streams for memory copy operations.*/
if (dmaStreamAllocate(STM32_DMA2_STREAM6, 0, NULL, NULL))
chSysHalt();
if (dmaStreamAllocate(STM32_DMA2_STREAM7, 0, NULL, NULL))
chSysHalt();
for (i = 0; i < sizeof (patterns1); i++)
patterns1[i] = (uint8_t)i;
for (i = 0; i < sizeof (patterns2); i++)
patterns2[i] = (uint8_t)(i ^ 0xAA);
/* Normal main() thread activity, it does continues memory copy operations
using 2 DMA streams at the lowest priority.*/
while (TRUE) {
VirtualTimer vt;
/* Starts a VT working as watchdog to catch a malfunction in the DMA
driver.*/
chSysLock();
chVTSetI(&vt, MS2ST(10), tmo, NULL);
chSysUnlock();
/* Copy pattern 1.*/
dmaStartMemCopy(STM32_DMA2_STREAM6,
STM32_DMA_CR_PL(0) | STM32_DMA_CR_PSIZE_BYTE |
STM32_DMA_CR_MSIZE_BYTE,
patterns1, buf1, sizeof (patterns1));
dmaStartMemCopy(STM32_DMA2_STREAM7,
STM32_DMA_CR_PL(0) | STM32_DMA_CR_PSIZE_BYTE |
STM32_DMA_CR_MSIZE_BYTE,
patterns1, buf2, sizeof (patterns1));
dmaWaitCompletion(STM32_DMA2_STREAM6);
dmaWaitCompletion(STM32_DMA2_STREAM7);
if (memcmp(patterns1, buf1, sizeof (patterns1)))
chSysHalt();
if (memcmp(patterns1, buf2, sizeof (patterns1)))
chSysHalt();
/* Copy pattern 2.*/
dmaStartMemCopy(STM32_DMA2_STREAM6,
STM32_DMA_CR_PL(0) | STM32_DMA_CR_PSIZE_BYTE |
STM32_DMA_CR_MSIZE_BYTE,
patterns2, buf1, sizeof (patterns2));
dmaStartMemCopy(STM32_DMA2_STREAM7,
STM32_DMA_CR_PL(0) | STM32_DMA_CR_PSIZE_BYTE |
STM32_DMA_CR_MSIZE_BYTE,
patterns2, buf2, sizeof (patterns2));
dmaWaitCompletion(STM32_DMA2_STREAM6);
dmaWaitCompletion(STM32_DMA2_STREAM7);
if (memcmp(patterns2, buf1, sizeof (patterns2)))
chSysHalt();
if (memcmp(patterns2, buf2, sizeof (patterns2)))
chSysHalt();
/* Stops the watchdog.*/
chSysLock();
if (chVTIsArmedI(&vt))
chVTResetI(&vt);
chSysUnlock();
chThdSleepMilliseconds(2);
}
return 0;
}