portapack-mayhem/firmware/common/lcd_ili9341.cpp
2016-02-03 10:33:54 -08:00

361 lines
9.6 KiB
C++

/*
* Copyright (C) 2014 Jared Boone, ShareBrained Technology, Inc.
*
* This file is part of PortaPack.
*
* This program is free software; you can redistribute it and/or modify
* it under the terms of the GNU General Public License as published by
* the Free Software Foundation; either version 2, or (at your option)
* any later version.
*
* This program is distributed in the hope that it will be useful,
* but WITHOUT ANY WARRANTY; without even the implied warranty of
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
* GNU General Public License for more details.
*
* You should have received a copy of the GNU General Public License
* along with this program; see the file COPYING. If not, write to
* the Free Software Foundation, Inc., 51 Franklin Street,
* Boston, MA 02110-1301, USA.
*/
#include "lcd_ili9341.hpp"
#include "portapack_io.hpp"
using namespace portapack;
#include "utility.hpp"
#include "ch.h"
namespace lcd {
namespace {
void lcd_reset() {
io.lcd_reset_state(false);
chThdSleepMilliseconds(1);
io.lcd_reset_state(true);
chThdSleepMilliseconds(10);
io.lcd_reset_state(false);
chThdSleepMilliseconds(120);
}
void lcd_sleep_in() {
io.lcd_data_write_command_and_data(0x10, {});
chThdSleepMilliseconds(5);
}
void lcd_sleep_out() {
io.lcd_data_write_command_and_data(0x11, {});
chThdSleepMilliseconds(120);
}
void lcd_display_on() {
io.lcd_data_write_command_and_data(0x29, {});
}
void lcd_init() {
// LCDs are configured for IM[2:0] = 001
// 8080-I system, 16-bit parallel bus
//
// 0x3a: DBI[2:0] = 101
// MDT[1:0] = XX (if not in 18-bit mode, right?)
// Power control B
// 0
// PCEQ=1, DRV_ena=0, Power control=3
io.lcd_data_write_command_and_data(0xCF, { 0x00, 0xD9, 0x30 });
// Power on sequence control
io.lcd_data_write_command_and_data(0xED, { 0x64, 0x03, 0x12, 0x81 });
// Driver timing control A
io.lcd_data_write_command_and_data(0xE8, { 0x85, 0x10, 0x78 });
// Power control A
io.lcd_data_write_command_and_data(0xCB, { 0x39, 0x2C, 0x00, 0x34, 0x02 });
// Pump ratio control
io.lcd_data_write_command_and_data(0xF7, { 0x20 });
// Driver timing control B
io.lcd_data_write_command_and_data(0xEA, { 0x00, 0x00 });
io.lcd_data_write_command_and_data(0xB1, { 0x00, 0x1B });
// Blanking Porch Control
// VFP = 0b0000010 = 2 (number of HSYNC of vertical front porch)
// VBP = 0b0000010 = 2 (number of HSYNC of vertical back porch)
// HFP = 0b0001010 = 10 (number of DOTCLOCK of horizontal front porch)
// HBP = 0b0010100 = 20 (number of DOTCLOCK of horizontal back porch)
io.lcd_data_write_command_and_data(0xB5, { 0x02, 0x02, 0x0a, 0x14 });
// Display Function Control
// PT[1:0] = 0b10
// PTG[1:0] = 0b10
// ISC[3:0] = 0b0010 (scan cycle interval of gate driver: 5 frames)
// SM = 0 (gate driver pin arrangement in combination with GS)
// SS = 1 (source output scan direction S720 -> S1)
// GS = 0 (gate output scan direction G1 -> G320)
// REV = 1 (normally white)
// NL = 0b100111 (default)
// PCDIV = 0b000000 (default?)
io.lcd_data_write_command_and_data(0xB6, { 0x0A, 0xA2, 0x27, 0x00 });
// Power Control 1
//VRH[5:0]
io.lcd_data_write_command_and_data(0xC0, { 0x1B });
// Power Control 2
//SAP[2:0];BT[3:0]
io.lcd_data_write_command_and_data(0xC1, { 0x12 });
// VCOM Control 1
io.lcd_data_write_command_and_data(0xC5, { 0x32, 0x3C });
// VCOM Control 2
io.lcd_data_write_command_and_data(0xC7, { 0x9B });
// Memory Access Control
// Invert X and Y memory access order, so upper-left of
// screen is (0,0) when writing to display.
io.lcd_data_write_command_and_data(0x36, {
(1 << 7) | // MY=1
(1 << 6) | // MX=1
(0 << 5) | // MV=0
(1 << 4) | // ML=1: reverse vertical refresh to simplify scrolling logic
(1 << 3) // BGR=1: For Kingtech LCD, BGR filter.
});
// COLMOD: Pixel Format Set
// DPI=101 (16 bits/pixel), DBI=101 (16 bits/pixel)
io.lcd_data_write_command_and_data(0x3A, { 0x55 });
//io.lcd_data_write_command_and_data(0xF6, { 0x01, 0x30 });
// WEMODE=1 (reset column and page number on overflow)
// MDT[1:0]
// EPF[1:0]=00 (use channel MSB for LSB)
// RIM=0 (If COLMOD[6:4]=101 (65k color), 16-bit RGB interface (1 transfer/pixel))
// RM=0 (system interface/VSYNC interface)
// DM[1:0]=00 (internal clock operation)
// ENDIAN=0 (doesn't matter with 16-bit interface)
io.lcd_data_write_command_and_data(0xF6, { 0x01, 0x30, 0x00 });
// 3Gamma Function Disable
io.lcd_data_write_command_and_data(0xF2, { 0x00 });
// Gamma curve selected
io.lcd_data_write_command_and_data(0x26, { 0x01 });
// Set Gamma
io.lcd_data_write_command_and_data(0xE0, {
0x0F, 0x1D, 0x19, 0x0E, 0x10, 0x07, 0x4C, 0x63,
0x3F, 0x03, 0x0D, 0x00, 0x26, 0x24, 0x04
});
// Set Gamma
io.lcd_data_write_command_and_data(0xE1, {
0x00, 0x1C, 0x1F, 0x02, 0x0F, 0x03, 0x35, 0x25,
0x47, 0x04, 0x0C, 0x0B, 0x29, 0x2F, 0x05
});
lcd_sleep_out();
lcd_display_on();
// Turn on Tearing Effect Line (TE) output signal.
io.lcd_data_write_command_and_data(0x35, { 0b00000000 });
}
void lcd_set(const uint_fast8_t command, const uint_fast16_t start, const uint_fast16_t end) {
io.lcd_data_write_command_and_data(command, {
static_cast<uint8_t>(start >> 8), static_cast<uint8_t>(start & 0xff),
static_cast<uint8_t>(end >> 8), static_cast<uint8_t>(end & 0xff)
});
}
void lcd_ramwr_start() {
io.lcd_data_write_command_and_data(0x2c, {});
}
void lcd_caset(const uint_fast16_t start_column, uint_fast16_t end_column) {
lcd_set(0x2a, start_column, end_column);
}
void lcd_paset(const uint_fast16_t start_page, const uint_fast16_t end_page) {
lcd_set(0x2b, start_page, end_page);
}
void lcd_start_ram_write(
const ui::Point p,
const ui::Size s
) {
lcd_caset(p.x, p.x + s.w - 1);
lcd_paset(p.y, p.y + s.h - 1);
lcd_ramwr_start();
}
void lcd_start_ram_write(
const ui::Rect& r
) {
lcd_start_ram_write(r.pos, r.size);
}
void lcd_vertical_scrolling_definition(
const uint_fast16_t top_fixed_area,
const uint_fast16_t vertical_scrolling_area,
const uint_fast16_t bottom_fixed_area
) {
io.lcd_data_write_command_and_data(0x33, {
static_cast<uint8_t>(top_fixed_area >> 8),
static_cast<uint8_t>(top_fixed_area & 0xff),
static_cast<uint8_t>(vertical_scrolling_area >> 8),
static_cast<uint8_t>(vertical_scrolling_area & 0xff),
static_cast<uint8_t>(bottom_fixed_area >> 8),
static_cast<uint8_t>(bottom_fixed_area & 0xff)
});
}
void lcd_vertical_scrolling_start_address(
const uint_fast16_t vertical_scrolling_pointer
) {
io.lcd_data_write_command_and_data(0x37, {
static_cast<uint8_t>(vertical_scrolling_pointer >> 8),
static_cast<uint8_t>(vertical_scrolling_pointer & 0xff)
});
}
}
void ILI9341::init() {
lcd_reset();
lcd_init();
io.lcd_backlight(1);
}
void ILI9341::shutdown() {
io.lcd_backlight(0);
lcd_reset();
}
void ILI9341::sleep() {
lcd_sleep_in();
}
void ILI9341::wake() {
lcd_sleep_out();
}
void ILI9341::fill_rectangle(ui::Rect r, const ui::Color c) {
const auto r_clipped = r.intersect(screen_rect());
if( !r_clipped.is_empty() ) {
lcd_start_ram_write(r_clipped);
size_t count = r_clipped.size.w * r_clipped.size.h;
io.lcd_write_pixels(c, count);
}
}
void ILI9341::fill_circle(
const ui::Point center,
const ui::Dim radius,
const ui::Color foreground,
const ui::Color background
) {
const uint32_t radius2 = radius * radius;
for(int32_t y=-radius; y<radius; y++) {
const int32_t y2 = y * y;
for(int32_t x=-radius; x<radius; x++) {
const int32_t x2 = x * x;
const uint32_t d2 = x2 + y2;
const bool inside = d2 < radius2;
const auto color = inside ? foreground : background;
draw_pixel({
static_cast<ui::Coord>(x + center.x),
static_cast<ui::Coord>(y + center.y)
}, color);
}
}
}
void ILI9341::draw_pixel(
const ui::Point p,
const ui::Color color
) {
if( screen_rect().contains(p) ) {
lcd_start_ram_write(p, { 1, 1 });
io.lcd_write_pixel(color);
}
}
void ILI9341::draw_pixels(
const ui::Rect r,
const ui::Color* const colors,
const size_t count
) {
/* TODO: Assert that rectangle width x height < count */
lcd_start_ram_write(r.pos, r.size);
io.lcd_write_pixels(colors, count);
}
void ILI9341::draw_bitmap(
const ui::Point p,
const ui::Size size,
const uint8_t* const pixels,
const ui::Color foreground,
const ui::Color background
) {
lcd_start_ram_write(p, size);
const size_t count = size.w * size.h;
for(size_t i=0; i<count; i++) {
const auto pixel = pixels[i >> 3] & (1U << (i & 0x7));
io.lcd_write_pixel(pixel ? foreground : background);
}
}
void ILI9341::draw_glyph(
const ui::Point p,
const ui::Glyph& glyph,
const ui::Color foreground,
const ui::Color background
) {
draw_bitmap(p, glyph.size(), glyph.pixels(), foreground, background);
}
void ILI9341::scroll_set_area(
const ui::Coord top_y,
const ui::Coord bottom_y
) {
scroll_state.top_area = top_y;
scroll_state.bottom_area = height() - bottom_y;
scroll_state.height = bottom_y - top_y;
lcd_vertical_scrolling_definition(scroll_state.top_area, scroll_state.height, scroll_state.bottom_area);
}
ui::Coord ILI9341::scroll_set_position(
const ui::Coord position
) {
scroll_state.current_position = position % scroll_state.height;
const uint_fast16_t address = scroll_state.top_area + scroll_state.current_position;
lcd_vertical_scrolling_start_address(address);
return address;
}
ui::Coord ILI9341::scroll(const int32_t delta) {
return scroll_set_position(scroll_state.current_position + scroll_state.height - delta);
}
ui::Coord ILI9341::scroll_area_y(const ui::Coord y) const {
const auto wrapped_y = (scroll_state.current_position + y) % scroll_state.height;
return wrapped_y + scroll_state.top_area;
}
void ILI9341::scroll_disable() {
lcd_vertical_scrolling_definition(0, height(), 0);
lcd_vertical_scrolling_start_address(0);
}
} /* namespace lcd */