portapack-mayhem/firmware/chibios/boards/EA_LPCXPRESSO_LPC812/board.c

137 lines
3.5 KiB
C
Executable File

/*
ChibiOS/RT - Copyright (C) 2006-2013 Giovanni Di Sirio
Licensed under the Apache License, Version 2.0 (the "License");
you may not use this file except in compliance with the License.
You may obtain a copy of the License at
http://www.apache.org/licenses/LICENSE-2.0
Unless required by applicable law or agreed to in writing, software
distributed under the License is distributed on an "AS IS" BASIS,
WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
See the License for the specific language governing permissions and
limitations under the License.
*/
#include "ch.h"
#include "hal.h"
/**
* @brief PAL setup.
* @details Digital I/O ports static configuration as defined in @p board.h.
* This variable is used by the HAL when initializing the PAL driver.
*/
#if HAL_USE_PAL || defined(__DOXYGEN__)
const PALConfig pal_default_config = {VAL_GPIO0DATA, VAL_GPIO0DIR};
#endif
/*
* Early initialization code.
* This initialization must be performed just after stack setup and before
* any other initialization.
*/
void __early_init(void){
lpc8xx_clock_init();
}
/*
* Board-specific initialization code.
*/
void boardInit(void){
/* Enable clocks to IOCON & SWM */
LPC_SYSCON->SYSAHBCLKCTRL |= ((1<<18)|(1<<7));
#if defined VAL_PIO0_0
LPC_IOCON->PIO0_0 = PIN_RSVD|VAL_PIO0_0;
#endif
#if defined VAL_PIO0_1
LPC_IOCON->PIO0_1 = PIN_RSVD|VAL_PIO0_1;
#endif
#if defined VAL_PIO0_2
LPC_IOCON->PIO0_2 = PIN_RSVD|VAL_PIO0_2;
#endif
#if defined VAL_PIO0_3
LPC_IOCON->PIO0_3 = PIN_RSVD|VAL_PIO0_3;
#endif
#if defined VAL_PIO0_4
LPC_IOCON->PIO0_4 = PIN_RSVD|VAL_PIO0_4;
#endif
#if defined VAL_PIO0_5
LPC_IOCON->PIO0_5 = PIN_RSVD|VAL_PIO0_5;
#endif
#if defined VAL_PIO0_6
LPC_IOCON->PIO0_6 = PIN_RSVD|VAL_PIO0_6;
#endif
#if defined VAL_PIO0_7
LPC_IOCON->PIO0_7 = PIN_RSVD|VAL_PIO0_7;
#endif
#if defined VAL_PIO0_8
LPC_IOCON->PIO0_8 = PIN_RSVD|VAL_PIO0_8;
#endif
#if defined VAL_PIO0_9
LPC_IOCON->PIO0_9 = PIN_RSVD|VAL_PIO0_9;
#endif
#if defined VAL_PIO0_10
LPC_IOCON->PIO0_10 = PIN_RSVD|VAL_PIO0_10;
#endif
#if defined VAL_PIO0_11
LPC_IOCON->PIO0_11 = PIN_RSVD|VAL_PIO0_11;
#endif
#if defined VAL_PIO0_12
LPC_IOCON->PIO0_12 = PIN_RSVD|VAL_PIO0_12;
#endif
#if defined VAL_PIO0_13
LPC_IOCON->PIO0_13 = PIN_RSVD|VAL_PIO0_13;
#endif
#if defined VAL_PIO0_14
LPC_IOCON->PIO0_14 = PIN_RSVD|VAL_PIO0_14;
#endif
#if defined VAL_PIO0_15
LPC_IOCON->PIO0_15 = PIN_RSVD|VAL_PIO0_15;
#endif
#if defined VAL_PIO0_16
LPC_IOCON->PIO0_16 = PIN_RSVD|VAL_PIO0_16;
#endif
#if defined VAL_PIO0_17
LPC_IOCON->PIO0_17 = PIN_RSVD|VAL_PIO0_17;
#endif
#if defined VAL_PINASSIGN0
LPC_SWM->PINASSIGN0 = VAL_PINASSIGN0;
#endif
#if defined VAL_PINASSIGN1
LPC_SWM->PINASSIGN1 = VAL_PINASSIGN1;
#endif
#if defined VAL_PINASSIGN2
LPC_SWM->PINASSIGN2 = VAL_PINASSIGN2;
#endif
#if defined VAL_PINASSIGN3
LPC_SWM->PINASSIGN3 = VAL_PINASSIGN3;
#endif
#if defined VAL_PINASSIGN4
LPC_SWM->PINASSIGN4 = VAL_PINASSIGN4;
#endif
#if defined VAL_PINASSIGN5
LPC_SWM->PINASSIGN5 = VAL_PINASSIGN5;
#endif
#if defined VAL_PINASSIGN6
LPC_SWM->PINASSIGN6 = VAL_PINASSIGN6;
#endif
#if defined VAL_PINASSIGN7
LPC_SWM->PINASSIGN7 = VAL_PINASSIGN7;
#endif
#if defined VAL_PINASSIGN8
LPC_SWM->PINASSIGN8 = VAL_PINASSIGN8;
#endif
/* Disable clocks to IOCON & SWM */
LPC_SYSCON->SYSAHBCLKCTRL &= ~((1<<18)|(1<<7));
}