mirror of
https://github.com/eried/portapack-mayhem.git
synced 2024-12-11 16:54:21 -05:00
197 lines
5.8 KiB
C
Executable File
197 lines
5.8 KiB
C
Executable File
/*
|
|
ChibiOS/RT - Copyright (C) 2006-2013 Giovanni Di Sirio
|
|
|
|
Licensed under the Apache License, Version 2.0 (the "License");
|
|
you may not use this file except in compliance with the License.
|
|
You may obtain a copy of the License at
|
|
|
|
http://www.apache.org/licenses/LICENSE-2.0
|
|
|
|
Unless required by applicable law or agreed to in writing, software
|
|
distributed under the License is distributed on an "AS IS" BASIS,
|
|
WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
|
|
See the License for the specific language governing permissions and
|
|
limitations under the License.
|
|
*/
|
|
|
|
#ifndef _BOARD_H_
|
|
#define _BOARD_H_
|
|
|
|
/*
|
|
* Setup for the Olimex STM32-LCD proto board.
|
|
*/
|
|
|
|
/*
|
|
* Board identifier.
|
|
*/
|
|
#define BOARD_OLIMEX_STM32_LCD
|
|
#define BOARD_NAME "Olimex STM32-LCD"
|
|
|
|
/*
|
|
* Board frequencies.
|
|
*/
|
|
#define STM32_LSECLK 32768
|
|
#define STM32_HSECLK 8000000
|
|
|
|
/*
|
|
* MCU type, supported types are defined in ./os/hal/platforms/hal_lld.h.
|
|
*/
|
|
#define STM32F10X_HD
|
|
|
|
/*
|
|
* IO pins assignments.
|
|
*/
|
|
#define GPIOA_SPI1NSS 4
|
|
|
|
#define GPIOB_SPI2NSS 12
|
|
|
|
#define GPIOA_USB_P 0
|
|
#define GPIOD_USB_DISC 2
|
|
|
|
#define GPIOE_TFT_RST 2
|
|
#define GPIOD_TFT_LIGHT 13
|
|
#define GPIOC_TFT_YD 0
|
|
#define GPIOC_TFT_YU 1
|
|
#define GPIOC_TFT_XL 2
|
|
#define GPIOC_TFT_XR 3
|
|
|
|
/*
|
|
* I/O ports initial setup, this configuration is established soon after reset
|
|
* in the initialization code.
|
|
*
|
|
* The digits have the following meaning:
|
|
* 0 - Analog input.
|
|
* 1 - Push Pull output 10MHz.
|
|
* 2 - Push Pull output 2MHz.
|
|
* 3 - Push Pull output 50MHz.
|
|
* 4 - Digital input.
|
|
* 5 - Open Drain output 10MHz.
|
|
* 6 - Open Drain output 2MHz.
|
|
* 7 - Open Drain output 50MHz.
|
|
* 8 - Digital input with PullUp or PullDown resistor depending on ODR.
|
|
* 9 - Alternate Push Pull output 10MHz.
|
|
* A - Alternate Push Pull output 2MHz.
|
|
* B - Alternate Push Pull output 50MHz.
|
|
* C - Reserved.
|
|
* D - Alternate Open Drain output 10MHz.
|
|
* E - Alternate Open Drain output 2MHz.
|
|
* F - Alternate Open Drain output 50MHz.
|
|
* Please refer to the STM32 Reference Manual for details.
|
|
*/
|
|
|
|
/*
|
|
* Port A setup.
|
|
* Everything input with pull-up except:
|
|
* PA0 - Normal input (USB P).
|
|
* PA2 - Alternate output (USART2 TX).
|
|
* PA3 - Normal input (USART2 RX).
|
|
* PA11 - Normal input (USB DM).
|
|
* PA12 - Normal input (USB DP).
|
|
*/
|
|
#define VAL_GPIOACRL 0x88884B84 /* PA7...PA0 */
|
|
#define VAL_GPIOACRH 0x88844888 /* PA15...PA8 */
|
|
#define VAL_GPIOAODR 0xFFFFFFFF
|
|
|
|
/*
|
|
* Port B setup.
|
|
* Everything input with pull-up except:
|
|
*/
|
|
#define VAL_GPIOBCRL 0x88888888 /* PB7...PB0 */
|
|
#define VAL_GPIOBCRH 0x88888888 /* PB15...PB8 */
|
|
#define VAL_GPIOBODR 0xFFFFFFFF
|
|
|
|
/*
|
|
* Port C setup.
|
|
* Everything input with pull-up except:
|
|
* PC0 - Analog Input (TP_YD).
|
|
* PC1 - Analog Input (TP_YU).
|
|
* PC2 - Analog Input (TP_XL).
|
|
* PC3 - Analog Input (TP_XR).
|
|
* PC8 - Alternate PP 50M (SD_D0).
|
|
* PC9 - Alternate PP 50M (SD_D1).
|
|
* PC10 - Alternate PP 50M (SD_D2).
|
|
* PC11 - Alternate PP 50M (SD_D3).
|
|
* PC12 - Alternate PP 50M (SD_CLK).
|
|
* PC14 - Normal input (XTAL).
|
|
* PC15 - Normal input (XTAL).
|
|
*/
|
|
#define VAL_GPIOCCRL 0x88880000 /* PC7...PC0 */
|
|
#define VAL_GPIOCCRH 0x448BBBBB /* PC15...PC8 */
|
|
#define VAL_GPIOCODR 0xFFFFFFFF
|
|
|
|
/*
|
|
* Port D setup.
|
|
* Everything input with pull-up except:
|
|
* PD2 - Alternate PP 50M (SD_CMD)
|
|
* PD0 - Alternate PP 50M (FSMC_D2)
|
|
* PD1 - Alternate PP 50M (FSMC_D3)
|
|
* PD4 - Alternate PP 50M (TFT_RD)
|
|
* PD5 - Alternate PP 50M (TFT_WR)
|
|
* PD7 - Alternate PP 50M (TFT_CS)
|
|
* PD8 - Alternate PP 50M (FSMC_D13)
|
|
* PD9 - Alternate PP 50M (FSMC_D14)
|
|
* PD10 - Alternate PP 50M (FSMC_D15)
|
|
* PD14 - Alternate PP 50M (FSMC_D0)
|
|
* PD15 - Alternate PP 50M (FSMC_D1)
|
|
*/
|
|
#define VAL_GPIODCRL 0xBBBB8BBB /* PD7...PD0 */
|
|
#define VAL_GPIODCRH 0xBB388BBB /* PD15...PD8 */
|
|
#define VAL_GPIODODR 0xFFFFFFFF
|
|
|
|
/*
|
|
* Port E setup.
|
|
* Everything input with pull-up except:
|
|
* PE2 - Digital Output (TFT_RST)
|
|
* PE3 - Alternate PP 50M (TFT_RS)
|
|
* PE7 - Alternate PP 50M (FSMC_D4)
|
|
* PE8 - Alternate PP 50M (FSMC_D5)
|
|
* PE9 - Alternate PP 50M (FSMC_D6)
|
|
* PE10 - Alternate PP 50M (FSMC_D7)
|
|
* PE11 - Alternate PP 50M (FSMC_D8)
|
|
* PE12 - Alternate PP 50M (FSMC_D9)
|
|
* PE13 - Alternate PP 50M (FSMC_D10)
|
|
* PE14 - Alternate PP 50M (FSMC_D11)
|
|
* PE15 - Alternate PP 50M (FSMC_D12)
|
|
*/
|
|
#define VAL_GPIOECRL 0xB888B388 /* PE7...PE0 */
|
|
#define VAL_GPIOECRH 0xBBBBBBBB /* PE15...PE8 */
|
|
#define VAL_GPIOEODR 0xFFFFFFFF
|
|
|
|
/*
|
|
* Port F setup.
|
|
* Everything input with pull-up expect:
|
|
*/
|
|
#define VAL_GPIOFCRL 0x88888888 /* PF7...PF0 */
|
|
#define VAL_GPIOFCRH 0x88888888 /* PF15...PF8 */
|
|
#define VAL_GPIOFODR 0xFFFFFFFF
|
|
|
|
/*
|
|
* Port G setup.
|
|
* Everything input with pull-up expect:
|
|
*/
|
|
#define VAL_GPIOGCRL 0x88888888 /* PG7...PG0 */
|
|
#define VAL_GPIOGCRH 0x88888888 /* PG15...PG8 */
|
|
#define VAL_GPIOGODR 0xFFFFFFFF
|
|
|
|
/*
|
|
* USB bus activation macro, required by the USB driver.
|
|
*/
|
|
#define usb_lld_connect_bus(usbp) palClearPad(GPIOD, GPIOD_USB_DISC)
|
|
|
|
/*
|
|
* USB bus de-activation macro, required by the USB driver.
|
|
*/
|
|
#define usb_lld_disconnect_bus(usbp) palSetPad(GPIOD, GPIOD_USB_DISC)
|
|
|
|
#if !defined(_FROM_ASM_)
|
|
#ifdef __cplusplus
|
|
extern "C" {
|
|
#endif
|
|
void boardInit(void);
|
|
#ifdef __cplusplus
|
|
}
|
|
#endif
|
|
#endif /* _FROM_ASM_ */
|
|
|
|
#endif /* _BOARD_H_ */
|