portapack-mayhem/firmware/application
euquiq 13ce56f7bf Added "RESOLUTION" parameter
Discord User jteich did some investigation (Thanks!) and helped me understanding this rather obscure parameter:

Internally, is called "TRIGGER", and is passed into the baseband when configuring the desired spectrum sample rate.

Please forgive me in advance if this explanation is not 100% correct. It's only my interpretation, based on my own observation and jteich's comments over Discord chat.

This trigger parameter apparently determines the amount of data over time used for calculating the signal's power inside each specttrum's bin, before considering it "done".

In short, if you lower this resolution value then the cascade will tend to be rendered a bit faster, while kind of blind to tiny signals.

On the other hand, a bigger value will help rendering and distinguishing different signals on the cascade.

Too big a value can easily clutter up the cascade. But then it may be a "blessing" when inspecting higher freuqencies -where hackrf is more deaf"

The default value of 32 is quite decent. But then, now you can experiment with it. Cheers
2020-10-26 23:43:35 -03:00
..
apps Added "RESOLUTION" parameter 2020-10-26 23:43:35 -03:00
bitmaps Removing more unnused files 2020-05-12 16:17:14 +02:00
hw PortaPack Sync, take 2 (#215) 2019-02-03 18:25:11 +00:00
protocols Finally found what was eating all the RAM :D 2018-05-15 23:35:30 +01:00
ui Merge branch 'v1.2' into add-heading-to-geomap 2020-08-15 15:52:53 +02:00
audio.cpp Mute and unmute audio 2020-06-08 01:22:58 +02:00
audio.hpp Mute and unmute audio 2020-06-08 01:22:58 +02:00
baseband_api.cpp Rename m4txevent::assert and m0apptxevent::assert (adding "_event") 2020-08-19 09:43:04 +02:00
baseband_api.hpp Pocsag improvements (#20) 2020-05-09 13:13:21 +02:00
bitmap.hpp Added interactive titlebar! 2020-08-01 21:55:09 -04:00
capture_thread.cpp
capture_thread.hpp
chconf.h
clock_manager.cpp UI Redesign for Portapack-Havoc (#268) 2019-10-29 22:53:54 +01:00
clock_manager.hpp PortaPack Sync, take 2 (#215) 2019-02-03 18:25:11 +00:00
CMakeLists.txt New "looking Glass" app 2020-10-21 13:21:34 -03:00
core_control.cpp
core_control.hpp
de_bruijn.cpp Started writing (copying...) AFSK RX 2017-08-29 09:42:04 +01:00
de_bruijn.hpp Started writing (copying...) AFSK RX 2017-08-29 09:42:04 +01:00
demofont.hpp
dirty_registers.hpp
emu_cc1101.cpp Added remaining buttons for TouchTunes remote 2017-09-24 20:05:42 +01:00
event_m0.cpp Do not turn off backlight, while typing 2020-05-09 16:23:22 +02:00
event_m0.hpp PortaPack Sync, take 2 (#215) 2019-02-03 18:25:11 +00:00
ffconf.h FatFs: Update to release R0.12c. 2017-05-03 12:43:45 +01:00
file.cpp Added back scanning in BHT TX 2018-01-09 21:12:19 +00:00
file.hpp Added back scanning in BHT TX 2018-01-09 21:12:19 +00:00
freqman.cpp Bad emplace_back code position fix 2020-09-11 20:46:41 +02:00
freqman.hpp scanner-enhanced-version 2020-07-20 16:43:24 -03:00
halconf.h
io.hpp
io_file.cpp
io_file.hpp OutputStream (file M0 -> M4 radio) now works 2017-06-23 08:40:22 +01:00
io_wave.cpp Added wav file viewer 2017-10-15 15:53:40 +01:00
io_wave.hpp Application: Fix uninitalized fmt_pcm_t field warning 2018-08-05 15:07:12 -07:00
irq_controls.cpp PortaPack Sync, take 2 (#215) 2019-02-03 18:25:11 +00:00
irq_controls.hpp PortaPack Sync, take 2 (#215) 2019-02-03 18:25:11 +00:00
irq_lcd_frame.cpp IRQ: Make handlers more independent of EventDispatcher. 2017-06-19 16:31:54 -07:00
irq_lcd_frame.hpp
irq_rtc.cpp IRQ: Make handlers more independent of EventDispatcher. 2017-06-19 16:31:54 -07:00
irq_rtc.hpp
log_file.cpp
log_file.hpp
main.cpp Added LGE app, nothing to see here 2019-02-06 17:34:53 +00:00
mcuconf.h Merge remote-tracking branch 'upstream/master' 2017-07-25 00:20:57 +01:00
portapack.cpp Speaker option for the H1 2020-06-08 01:23:44 +02:00
portapack.hpp Speaker option for the H1 2020-06-08 01:23:44 +02:00
radio.cpp Restored radio.cpp 2020-08-24 11:21:30 +08:00
radio.hpp CPLD: Remove decimation feature. 2016-08-21 11:31:37 -07:00
receiver_model.cpp Audio FIR filter for CW 2020-08-17 16:07:06 +03:00
receiver_model.hpp Bias-T now works in capture mode 2018-12-18 16:25:21 +00:00
recent_entries.cpp ADSB position decoding 2017-08-17 12:56:47 +01:00
recent_entries.hpp
replay_thread.cpp Finally found what was eating all the RAM :D 2018-05-15 23:35:30 +01:00
replay_thread.hpp Added loop option in Replay app 2017-12-11 04:14:54 +00:00
rf_path.cpp
rf_path.hpp
rfm69.cpp Added RFM69 helper 2019-05-05 00:43:36 +01:00
rfm69.hpp Added RFM69 helper 2019-05-05 00:43:36 +01:00
rtc_time.cpp
rtc_time.hpp
sd_card.cpp
sd_card.hpp
serializer.cpp Added remaining buttons for TouchTunes remote 2017-09-24 20:05:42 +01:00
serializer.hpp AFSK RX works (only Bell202 for now) 2017-09-02 08:28:29 +01:00
signal.hpp
spectrum_color_lut.cpp Analog tv app (#334) 2020-04-20 06:50:24 +02:00
spectrum_color_lut.hpp Analog tv app (#334) 2020-04-20 06:50:24 +02:00
string_format.cpp Merge branch 'pr/166' into Radiosonde-vaisala-add-temp-humidity-merge-conflicts-fix 2020-09-14 23:11:08 +02:00
string_format.hpp Radiosonde-vaisala-add-temp-humidity 2020-08-24 17:31:27 -03:00
temperature_logger.cpp
temperature_logger.hpp
tone_key.cpp Bias-T now works in capture mode 2018-12-18 16:25:21 +00:00
tone_key.hpp Added back frequency display for CTCSS 2017-12-06 13:20:51 +00:00
touch.cpp
touch.hpp
transmitter_model.cpp Added support for multiple sample rates in IQ record 2018-02-22 07:04:19 +00:00
transmitter_model.hpp Few improvements in ui_transmitter (#332) 2020-04-16 23:58:06 +02:00
tuning.cpp
tuning.hpp
ui_baseband_stats_view.cpp
ui_baseband_stats_view.hpp
ui_handwrite.cpp Merge remote-tracking branch 'upstream/master' 2017-06-21 03:25:27 +01:00
ui_handwrite.hpp Merge remote-tracking branch 'upstream/master' 2017-06-21 03:25:27 +01:00
ui_loadmodule.cpp
ui_loadmodule.hpp
ui_navigation.cpp New "looking Glass" app 2020-10-21 13:21:34 -03:00
ui_navigation.hpp Version bump 2020-09-25 03:34:51 +02:00
ui_playdead.cpp Added Bias-T toggle confirmation 2018-01-08 03:47:37 +00:00
ui_playdead.hpp Tones bugfix, numbers station voice files search 2017-03-22 03:21:06 +00:00
ui_record_view.cpp Fix for https://github.com/eried/portapack-mayhem/issues/35 Capture app hang on exit 2020-05-29 00:55:57 +02:00
ui_record_view.hpp Fix for https://github.com/eried/portapack-mayhem/issues/35 Capture app hang on exit 2020-05-29 00:55:57 +02:00
ui_sd_card_debug.cpp Debug sd card verbose by @gregoryfenton 2020-06-09 23:43:45 +02:00
ui_sd_card_debug.hpp
ui_sd_card_status_view.cpp
ui_sd_card_status_view.hpp
unistroke.hpp
ymdata.hpp