/* * Copyright (C) 2024 jLynx. * * This file is part of PortaPack. * * This program is free software; you can redistribute it and/or modify * it under the terms of the GNU General Public License as published by * the Free Software Foundation; either version 2, or (at your option) * any later version. * * This program is distributed in the hope that it will be useful, * but WITHOUT ANY WARRANTY; without even the implied warranty of * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the * GNU General Public License for more details. * * You should have received a copy of the GNU General Public License * along with this program; see the file COPYING. If not, write to * the Free Software Foundation, Inc., 51 Franklin Street, * Boston, MA 02110-1301, USA. */ #ifndef __MAX17055_H__ #define __MAX17055_H__ #include #include #include #include "battery.hpp" #include "i2c_pp.hpp" #define MAX17055_POR 0 #define MAX17055_IMin 1 #define MAX17055_IMax 2 #define MAX17055_VMin 3 #define MAX17055_VMax 4 #define MAX17055_TMin 5 #define MAX17055_TMax 6 #define MAX17055_SOC_Min 7 #define MAX17055_SOC_Max 8 #define MAX17055_SOC_Change 9 #define MAX17055_Bat_Status 10 #define MAX17055_Bat_Insert 11 #define MAX17055_Bat_Remove 12 // Design Parameters //---------------------------------------------- // Define Battery Capacity #ifndef __MAX17055_Design_Capacity__ #define __MAX17055_Design_Capacity__ BATTERY_DESIGN_CAP // Battery Capacity #endif // Define Gauge Resistor #ifndef __MAX17055_Resistor__ #define __MAX17055_Resistor__ 0.01 // Shunt Resistor #endif // Define Minimum Voltage #ifndef __MAX17055_Min_Voltage__ #define __MAX17055_Min_Voltage__ BATTERY_MIN_VOLTAGE / 1000.0 // Minimum Voltage #endif // Define Maximum Voltage #ifndef __MAX17055_Max_Voltage__ #define __MAX17055_Max_Voltage__ BATTERY_MAX_VOLTAGE / 1000.0 // Maximum Voltage #endif // Define Empty Voltage #ifndef __MAX17055_Empty_Voltage__ #define __MAX17055_Empty_Voltage__ BATTERY_MIN_VOLTAGE / 1000.0 // Empty Voltage #endif // Define Recovery Voltage #ifndef __MAX17055_Recovery_Voltage__ #define __MAX17055_Recovery_Voltage__ 3.1 // Recovery Voltage #endif // Define Maximum Current #ifndef __MAX17055_Max_Current__ #define __MAX17055_Max_Current__ 3.0 // Maximum Current #endif // Define Termination Current #ifndef __MAX17055_Termination_Current__ #define __MAX17055_Termination_Current__ 0.1 // Termination Current #endif // Define Minimum Temperature #ifndef __MAX17055_Min_Temperature__ #define __MAX17055_Min_Temperature__ -20 // Minimum Temperature #endif // Define Maximum Temperature #ifndef __MAX17055_Max_Temperature__ #define __MAX17055_Max_Temperature__ 60 // Maximum Temperature #endif // Define Battery Model #ifndef __MAX17055_Battery_Model__ #define __MAX17055_Battery_Model__ 0 // Battery Model #endif // Define Limits //---------------------------------------------- // Define Minimum SOC #ifndef __MAX17055_Min_SOC__ #define __MAX17055_Min_SOC__ 0 // Minimum SOC #endif // Define Maximum SOC #ifndef __MAX17055_Max_SOC__ #define __MAX17055_Max_SOC__ 100 // Maximum SOC #endif // Config1 (0x1D) Configuration //---------------------------------------------- // Enable alert on battery removal when the IC is mounted host side. // When Ber = 1, a battery-removal condition, as detected by the AIN pin voltage, triggers an alert. #ifndef MAX17055_Ber #define MAX17055_Ber 0 #endif // Enable alert on battery insertion when the IC is mounted host side. // When Bei = 1, a battery-insertion condition, as detected by the AIN pin voltage, triggers an alert. #ifndef MAX17055_Bei #define MAX17055_Bei 0 #endif // When Aen = 1, violation of any of the alert threshold register values // by temperature, voltage, or SOC triggers an alert. This bit // affects the ALRT pin operation only. The Smx, Smn, Tmx, // Tmn, Vmx, Vmn, Imx, and Imn bits of the Status register // (00h) are not disabled. #ifndef MAX17055_Aen #define MAX17055_Aen 1 #endif // This allows the host to control the bias of the thermistor switch or // enable fast detection of battery removal. Set FTHRM = 1 // to always enable the thermistor bias switch. With a standard 10kΩ thermistor, // this adds an additional ~200μA to the current drain of the circuit. #ifndef MAX17055_FTHRM #define MAX17055_FTHRM 0 #endif // Set to logic 1 to enable the automatic THRM output bias and AIN measurement. #ifndef MAX17055_ETHRM #define MAX17055_ETHRM 0 #endif // Set to logic 1 to force the device to enter shutdown mode if both // SDA and SCL are held low for more than timeout of the // ShdnTimer register. #ifndef MAX17055_COMMSH #define MAX17055_COMMSH 0 #endif // Write this bit to logic 1 to force a shutdown of the device after timeout of the ShdnTimer register (default 45s delay). #ifndef MAX17055_SHDN #define MAX17055_SHDN 0 #endif // When set to 1, the fuel gauge requires external temperature measurements to be // written from the host. When set to 0, the IC's own measurements as used as selected by Config.TSEL. #ifndef MAX17055_Tex #define MAX17055_Tex 0 #endif // Set to 1 and set ETHRM or FTHRM to 1 to enable temperature measurements selected by Config.TSel. #ifndef MAX17055_Ten #define MAX17055_Ten 1 #endif // Set to 1 to enable device shutdown when the IC is mounted host side and the battery is removed. #ifndef MAX17055_AINSH #define MAX17055_AINSH 0 #endif // When IS = 1, current alerts can only be cleared through software. When IS = 0, // current alerts are cleared automatically when the thresholdis no longer exceeded. #ifndef MAX17055_IS #define MAX17055_IS 0 #endif // When VS = 1, voltage alerts can only be cleared through software. When VS = 0, // voltage alerts are cleared automatically when the threshold is no longer exceeded. #ifndef MAX17055_VS #define MAX17055_VS 0 #endif // When TS = 1, temperature alerts can only be cleared through software. WhenTS = 0, // temperature alerts are cleared automatically whenthe threshold is no longer exceeded. #ifndef MAX17055_TS #define MAX17055_TS 0 #endif // When SS = 1, SOC alerts can only be cleared through software. When SS = 0, // SOC alerts are cleared automatically when the threshold is no longer exceeded. #ifndef MAX17055_SS #define MAX17055_SS 0 #endif // 0 to use internal die temperature. 1 to use temperature information from thermistor. // ETHRM bit should be set to 1 when TSel is 1. #ifndef MAX17055_TSel #define MAX17055_TSel 0 #endif // Config1 (0xBB) Configuration //---------------------------------------------- // Set to 1 to enable constant-power mode. If it is set to 0, // AtRate/AvgCurrent is used for (At)TTE/(At) QResidual/(At)AvSOC/(At)AvCap. #ifndef MAX17055_CPMode #define MAX17055_CPMode 0 #endif // Host sets this bit to 1 in order to initiate firmware to finish processing a newly loaded model. // Firmware clears this bit to zero to indicate that model loading is finished. #ifndef MAX17055_LDMDL #define MAX17055_LDMDL 0 #endif // Set this bit to 1 to enable temperature based alerts. // Write this bit to 0 to disable temperature alerts. This bit is set to 1 at power-up. #ifndef MAX17055_TAIrtEN #define MAX17055_TAIrtEN 1 #endif // Set this bit to 1 to enable alert output with the Status.dSOCi bit function. // Write this bit to 0 to disable alert output with the Status. dSOCi bit. This bit is set to 0 at power-up. #ifndef MAX17055_dSOCen #define MAX17055_dSOCen 0 #endif // When this bit is set to 0, Dynamic Power calculations are disabled and registers // MaxPeakPower/SusPeakPower/MPPCurrent/ SPPCurrent can be used as general purpose memory. #ifndef MAX17055_DPEn #define MAX17055_DPEn 0 #endif // When this bit is set to 0, AtRate calculations are disabled and registers // AtQResidual/AtTTE/AtAvSOC/AtAvCap can be used as general purpose memory. #ifndef MAX17055_AtRateEn #define MAX17055_AtRateEn 0 #endif namespace battery { namespace max17055 { using address_t = uint8_t; class MAX17055 { public: constexpr MAX17055(I2C& bus, const I2C::address_t bus_address) : bus(bus), bus_address(bus_address), detected_(false) {} void init(); bool detect(); bool isDetected() const { return detected_; } uint16_t readVoltage(); uint8_t readPercentage(); void getBatteryInfo(uint8_t& valid_mask, uint8_t& batteryPercentage, uint16_t& voltage, int32_t& current); uint16_t instantVoltage(void); uint16_t averageVoltage(void); uint16_t emptyVoltage(void); uint16_t recoveryVoltage(void); int32_t instantCurrent(void); int32_t averageCurrent(void); uint16_t stateOfCharge(void); uint16_t averageStateOfCharge(void); uint16_t instantCapacity(void); uint16_t designCapacity(void); uint16_t fullCapacity(void); uint16_t icTemperature(void); uint16_t timeToEmpty(void); uint16_t timeToFull(void); uint16_t batteryAge(void); uint16_t chargeCycle(void); bool statusControl(const uint8_t _Status); void statusClear(void); uint16_t chargeTerminationCurrent(void); uint16_t read_register(const uint8_t reg); bool write_register(const uint8_t reg, const uint16_t value); private: I2C& bus; const I2C::address_t bus_address; bool detected_ = false; bool readRegister(uint8_t reg, uint16_t& value); bool readMultipleRegister(uint8_t reg, uint8_t* data, uint8_t length, bool endTransmission); bool writeMultipleRegister(uint8_t reg, const uint8_t* data, uint8_t length); bool setEmptyVoltage(uint16_t _Empty_Voltage); bool setRecoveryVoltage(uint16_t _Recovery_Voltage); bool setMinVoltage(uint16_t _Minimum_Voltage); bool setMaxVoltage(uint16_t _Maximum_Voltage); bool setMaxCurrent(uint16_t _Maximum_Current); bool setChargeTerminationCurrent(uint16_t _Charge_Termination_Current); bool setDesignCapacity(const uint16_t _Capacity); bool setFullCapRep(const uint16_t _Capacity); bool setFullCapNom(const uint16_t _Capacity); bool setRepCap(const uint16_t _Capacity); bool setMinSOC(uint8_t _Minimum_SOC); bool setMaxSOC(uint8_t _Maximum_SOC); bool setMinTemperature(uint8_t _Minimum_Temperature); bool setMaxTemperature(uint8_t _Maximum_Temperature); bool setModelCfg(const uint8_t _Model_ID); bool setHibCFG(const uint16_t _Config); void config(void); }; } /* namespace max17055 */ } // namespace battery #endif /* __MAX17055_H__ */