Commit Graph

24 Commits

Author SHA1 Message Date
furrtek
3193c6ee99 Added bias-T status icon
Merged radio settings in one screen
2018-01-07 23:13:08 +00:00
furrtek
32ae059c44 Added workaround for the CPLD overlay issue in tx mode
Set back mic samplerate to 24kHz because 48kHz was poop :(
2017-11-09 22:25:37 +00:00
furrtek
69b0ef9a40 Microphone tx is mostly working, Voice activation, PTT, CTCSS...
Transmit bandwidth bugfix
TX LED is now only lit when using rf amp
VU-meter widget
Added gain parameter for baseband audio TX
2017-03-13 04:09:21 +00:00
furrtek
b10c88e271 POCSAG bitrate selection and logging toggle
Small checkboxes
2017-01-16 13:36:28 +00:00
furrtek
5e40669cbc Merge 'upstream/master' - At least it builds... 2017-01-16 03:45:44 +00:00
Jared Boone
77016b9a40 Rename CPLD "Q_INVERT" to signal to "INVERT".
Don't expose detail in name about how the task is accomplished.
2016-08-21 11:35:40 -07:00
Jared Boone
b0a3f680e5 CPLD: Remove decimation feature. 2016-08-21 11:31:37 -07:00
Jared Boone
1e39b7ea45 Expose TX gain in radio API. 2016-08-03 16:12:22 -07:00
furrtek
739956b42b Sync with Sharebrained's fw, only Xylos TX works for now 2016-07-27 03:03:40 +02:00
Jared Boone
3e2b6087c2 Tighten up radio API, stop leaking 1st/2nd IF instances. 2016-02-16 10:28:13 -08:00
Jared Boone
58864ebbe7 Remove extra #includes. 2016-02-10 20:19:27 -08:00
Jared Boone
49a89b9dee Single function to configure/enable radio. 2016-02-10 16:58:25 -08:00
Jared Boone
682c87e3ff Wrap baseband sampling rate function to radio:: function. 2016-02-05 16:36:36 -08:00
Jared Boone
10d4172d5c RF antenna bias voltage control API. 2016-01-23 11:30:00 -08:00
Jared Boone
0647f26707 Move SGPIO configuration and control to baseband firmware.
Addresses long-standing and annoying bug where SGPIO DMA channel would not disable -- and not configure cleanly next time it was needed. My theory is that the DMA channel couldn't disable until it got a request from the peripheral, and sometimes the peripheral was disabled before that last request.

Anyway, the baseband firmware should control the SGPIO, methinks, despite the impact on baseband code size.
2016-01-10 10:23:39 -08:00
Jared Boone
b38338efc0 Keep MAX2837 in standby so temperature can be read.
I think this won't significantly impact power consumption.
2015-12-17 20:59:21 -08:00
Jared Boone
c7d49eb190 Expose MAX2837 registers, show registers in debug view. 2015-12-13 11:50:06 -08:00
Jared Boone
5d9079f87f Stop streaming when changing baseband configuration.
Without, the baseband would get confused.
2015-08-27 14:07:15 -07:00
Jared Boone
8f326e2d8e Use PPB correction to adjust clock generator XTAL PLLA frequency.
Addresses issue #40.
2015-08-24 12:11:33 -07:00
Jared Boone
45d26abf10 Use correct memory region for persistent storage.
Turns out 0x10088000 - 0x10089fff is not the right place. It's 0x40041000, and is only 256 bytes!
Move PPM to correct place, change representation to PPB for finer control.
Reset PPB value to initial value if read value out of bounds.
Clip PPB value on write to permitted bounds.
Contributes to resolution of issue #11.
2015-08-04 10:03:18 -07:00
Jared Boone
1d16cd8aac Consolidate peripheral declarations. 2015-08-01 13:42:27 -07:00
Clayton Smith
3874c82d57 Store PPM in shared memory for now. 2015-07-29 14:26:40 -07:00
Clayton Smith
9dd41ed48d Add frequency correction (WIP). 2015-07-29 14:26:39 -07:00
Jared Boone
dc6fee8370 Initial firmware commit. 2015-07-08 08:39:24 -07:00