* temp
* temp - 1
* next step note
* fix circuit dependency (to fix:can't read p.mem)
* fix circuit dependency (to fix:can't read p.mem)
* notes
* bitmap
* bitmap
* remove my stupid forward declearation
* clean up
* clean up
* level control
* clean up
* clean up
* clean up
* clean up
* format
* format
* format
* format
* format
* fix for comment advices
* fix for comment advices
* fix display issue in notepad app
* slightly increase performance...
* temp for grey_scale and high_constrast
* format
* note for cache implement
* fix for comment request
* fix for comment request
* Pad image to 1MB and add simple checksum
* Test code to verify firmware checksum
* Comment out unneeded zlib
* Add files via upload
* Print space remaining in ROM
* Append checksum to external apps too
* Check external app checksums when loading
* Is it 2024 already?!
* Validate firmware checksum before flashing
* Add files via upload
* Added flash error warning to nav screen
* Clang
* Replaced some hard-coded values with #defines
* Check FW checksum before USB serial flash too
* Add files via upload
- Recon repeat delay, range: from 0s to 254s, timer is played before each TX
- fixed missing '<' '>' around button names for DELETE and REMOVE name to indicate that they can also be used to skip in the list
- added missing pmem recon dump entries
* UI for Recon Repeater config
* persistent recon repeat settings
* record_view: added possibility to force keep the provided record filename
* working auto record to same file
* Recon TX
* added Repeater type
* adding yellow coloring on Repeater config+a modal, comments in the code
* default repeater values
* support for a sdcard speed option
* trying to link sdio_cclk_set from file
* changed io to IO in checkbox text
* changed order so high speed option is read after pmem is restored from sd
* test button
* took out unneeded comment
* force behavior of test button
---------
Co-authored-by: GullCode <gullradriel@hotmail.com>
* Add files via upload
* Add files via upload
* Add files via upload
* Add files via upload
* Clang
* Clang
* Tweak position of field on screen
* Reverted text on Write button per reviewer feedback
* Add files via upload
* Add files via upload
* Add files via upload
* Add files via upload
* Add files via upload
* Add files via upload
* Add files via upload
* Add files via upload
* WIP RadioState init
* TX/RX cleanup
* Update all apps using RadioState and setting modulation mode
* Set apps to use AM mode
* Don't push modulation update in RadioState.
* Support passing overrides to Audio and MicTX
* Support set_nearest on OptionsField, fix recon step
* Fix audio, typo
---------
Co-authored-by: kallanreed <kylereed@manzana.lan>
Co-authored-by: kallanreed <kallanreed@noreply.github.com>
* Added fn to indicate support for disabling speaker
* Support both mute & speaker disable icons
* Byte grouping for ui_config2_t bitmap
* Fix disabling AK speaker to take effect immediately
* added auto record checbox and functions (audio and raw)
* Changed baseband compile option from -O3 to -O2. Trying lower gave unexpeted and crashing results.
* added 650k SPEC bw
* fix hang if wait is -100
* fixing no SPEC support in scanner
* fix pmem -> make backup_ram_t data members volatile
plus add calculated crc to the pmem debug screen
* rename pmem debug menu to p.mem
As this is how its refered to in the wiki and other screens
* p.mem looked strange with capital P
---------
Co-authored-by: Eisenberger Tamas <e.tamas@iwstudio.hu>
* reset config when holding down select durring boot
it still need to be tripple checked if adc or control init really doesnt use any pmem
* one less magic number :)
* dual key action left+right for pmem reset
---------
Co-authored-by: Eisenberger Tamas <e.tamas@iwstudio.hu>
* moved pmem setting restore before top bar is loaded
* added a check pmem from sdcard function, replaced occurences, added a save to file on back button
* Added defines for flag file and dump file, changed test func name to should_use_sdcard_for_pmem, used file_exists, removed save and load pmem parameter
* changed a text to a more comprehesible one
* Support for 3 levels of rotary encoder sensitivity #965
Backend support; UI will still need to call set function to configure.
* Support for 3 levels of rotary encoder sensitivity #965
Backend support only. UI will still need to be changed to call the set_sensitivity() function to configure.
* Removed trailing space
* Deleted blank lines to see if format checker will be happier
* Simpler support for multiple levels of encoder sensitivity, for issue #965
Removed the convoluted code :-) and instead just using a 2-dimensional array to choose which transition map to use. For now I only have 2 (vs 3) levels enabled as well, to save code space and because high-sensitivity is very touchy.
* Simpler version of configurable encoder sensitivity, issue #965
* Formatting
* Formatting test for Clang
* Formatting test
* Formatting (removed helpful comment)
* Formatting test (remove commented-out code)
* Formatting & swapping medium/low so default mode=0
* Swapped medium/low so default mode=0
* Adding UI & PMEM support to make encoder dial sensitivity configurable, issue #965
* Adding UI & PMEM support to make encoder dial sensitivity configurable, issue #965
* Adding UI & PMEM support to make encoder dial sensitivity configurable, issue #965
* Adding UI & PMEM support to make encoder dial sensitivity configurable, issue #965
* Adding UI & PMEM support to make encoder dial sensitivity configurable, issue #965
* Adding UI & PMEM support to make encoder dial sensitivity configurable, issue #965
* Removed unneeded range check (trusting in pmem checksum)
* fix units for frequency offset. It was planned to be a uint32_t since a uint16_t is obviously too short
* took the uint32_t limitation for frequency offset in account
* Added HamItUp option to allow quick offset of the tuned frequency
* New HamItUp icon for top bar
* HamItUp checkbox status and frequency persistent settings in Settings/Radio
* Set usable defaults for Recon when PortaPack is not having a valid button battery installed
* fixed indentation
* fixed indentation
---------
Co-authored-by: GullCode <gullradriel@hotmail.com>
* Make default constructor for touch calibration
* Add persistent memory check value and access abstraction.
* Add persistent data_t default constructor with reasonable defaults.
* serial_format_t default constructor.
* Tidy up backlight timeout type.
* Add persistent data struct version/checking.
* Make range_t functions constexpr.
* Move ui_config and functions into class.
* Add backlight_config_t struct, separate enable and time settings.
