Commit Graph

63 Commits

Author SHA1 Message Date
Brumi-2021
745574d3c4 Ak4951-ALC_base adding WM8731-boost OFF options 2022-09-28 22:42:33 +02:00
heurist1
318720f364 Removed all traces of the parameters on the POGSAG config message
Left in the message for the moment, because there are likely to be parameters needed at some point.
2021-10-22 18:11:50 +01:00
eried
57ed3ebb43 Merge branch 'pr/325' into next 2021-04-14 09:30:53 +02:00
DESKTOP-R56EVJP\Alex
f65852ff05 Rebased code from new eried repo commits. Changed to to reflect strijar implementation. Fixed previous issue with old ssb-am-tx ui_mictx code. 2021-03-21 20:21:50 -05:00
East2West
f15cf78101
Add APRS Receiving App 2021-03-11 22:27:19 -06:00
eried
1c9ccbc247 Rename m4txevent::assert and m0apptxevent::assert (adding "_event")
Copied from f6cdf6a722#
2020-08-19 09:43:04 +02:00
Erwin Ried
4aaac8545b
Pocsag improvements (#20)
* Update analog_audio_app.cpp (#353)

* Adding phase field (extracted from @jamesshao8 repo)
2020-05-09 13:13:21 +02:00
Erwin Ried
40531e9230
Ble receiver (#337)
* BLE app

* Update ui_navigation.cpp

Co-authored-by: Furrtek <furrtek@gmail.com>
2020-04-20 06:50:03 +02:00
Erwin Ried
d95bda65ce
Nrf24l01 demodulation (#338)
* NRF demodulation

* Update ui_navigation.cpp
2020-04-20 06:45:28 +02:00
furrtek
b11c3c94b6 Added tone key mix ratio in Settings -> Audio
Renamed Setup to Settings
Updated binary
2018-05-16 09:45:13 +01:00
furrtek
b29c1d9749 Finally found what was eating all the RAM :D
Re-enabled the tone key selector in Soundboard
Soundboard now uses OutputStream, like Replay
Constexpr'd a bunch of consts which were going to BSS section
Exiting an app now goes back to main menu
Cleaned up Message array
2018-05-15 23:35:30 +01:00
furrtek
7fd987a2b4 Added support for multiple sample rates in IQ record
Support for any sample rate <= 500k in IQ replay
Fixed bias-t power not activating in TX
Removed RSSI pitch output option (awful code)
Udated binary
2018-02-22 07:04:19 +00:00
furrtek
57c759627d Fixed mic tx not working the first time it was entered
Fixed SD card FAT wipe (buffer size too big)
Cleared some warnings from ADSB rx
Updated binary
2018-02-01 11:17:51 +00:00
furrtek
d77337dd77 Added CTCSS decoder in NFM RX
RSSI output is now pitch instead of PWM
Disabled RSSI output in WBFM mode
2017-11-28 08:52:04 +01:00
furrtek
1b93dd53e8 Tone generator class 2017-11-10 00:25:04 +00:00
furrtek
950bc2b1d2 AFSK RX works (only Bell202 for now)
AFSK RX always logs to file
Removed frequency and bw settings from modem setup view
Updated binary
Bugfix: Binary display shifted one bit
Bugfix: Frequency manager views freezing if SD card not present
Bugfix: Menuview blinking arrow not showing up at the right position
Bugfix: Freeze if console written to while it's hidden
Broken: LCR TX, needs UI update
2017-09-02 08:28:29 +01:00
furrtek
42439d1885 Started writing (copying...) AFSK RX
Encoders: removed bit duration setting (frame duration is more useful)
2017-08-29 09:42:04 +01:00
furrtek
58f113d153 "CW generator" and "Whistle" merged in "Signal generator"
Added wave shape selection and tone frequency auto-update
Converted color icons to B&W
2017-07-18 19:31:05 +01:00
furrtek
e2f0a03460 Using new CPLD data (fixes spectrum mirroring)
Scanner bugfix for wide ranges
Added squelch parameter for NFM receiver
Adjustment to Vumeter widget rendering
2017-06-11 09:50:29 +01:00
furrtek
90feadd9f5 POCSAG RX saves ignored address
Made AFSK code more generic (not tied to LCR)
Added modem presets and more options in AFSK setup
String-ized and simplified LCR UI code
Simplified AFSK baseband code, made to always work on 16bit words
2017-04-21 06:22:31 +01:00
furrtek
40b49e2072 POCSAG address filter now ignores alpha messages
Experimenting with FIFOs for replay...
2017-04-19 22:05:16 +01:00
furrtek
d59ee08f41 Whistle now works
Moved BW widget in txview
String-ized LCR and AFSK message generator
2017-04-18 12:55:49 +01:00
furrtek
fbc054ca75 Coaster pager address scan
Merged tone setups
2017-04-11 08:42:31 +01:00
furrtek
6a0bcb9cca SSTV transmit beta (320x256 24bpp Scottie 2 only) 2017-03-23 04:29:58 +00:00
furrtek
37cfcd392d Added DCS parity table and generator tool 2017-03-14 07:24:04 +00:00
furrtek
69b0ef9a40 Microphone tx is mostly working, Voice activation, PTT, CTCSS...
Transmit bandwidth bugfix
TX LED is now only lit when using rf amp
VU-meter widget
Added gain parameter for baseband audio TX
2017-03-13 04:09:21 +00:00
furrtek
4e8980e5d8 Finished jammer modes
Shaved off a few kBs by using the Labels widget
2017-02-13 05:35:13 +00:00
furrtek
dc7fcbc6c3 POCSAG TX (with fixed message for testing) 2017-02-07 17:48:17 +00:00
furrtek
8662ed4024 Close Call should be more accurate
Merged close call and wideband spectrum baseband processors
2017-02-01 08:53:26 +00:00
furrtek
064e097bc3 Symfield widget auto-inits
ADS-B emergency frame
2017-02-01 00:21:13 +00:00
furrtek
688a012443 Transmitter config widget
Frequency manager duplicate alert
Tone sets
2017-01-30 13:10:30 +00:00
furrtek
0642d633c3 Frequency manager empty file bugfix 2017-01-30 01:09:00 +00:00
furrtek
f0fbc356ad Jammer bugfix: now produces all the right channels 2017-01-17 14:27:37 +00:00
furrtek
7cb38f858e Udpdated jammer baseband code, should work again 2017-01-17 08:42:35 +00:00
furrtek
e4abcea9a3 Added bitrate option for POCSAG baseband, PWMRSSI frequency option
Split SD card wiper app
Cleanup for -Weffc++
2017-01-16 08:40:17 +00:00
furrtek
5e40669cbc Merge 'upstream/master' - At least it builds... 2017-01-16 03:45:44 +00:00
furrtek
6bcb7dc1b1 # This is a combination of 2 commits.
# The first commit's message is:

Updated RDS transmitter: flags, PI and date/time

Merging baseband audio tone generators

Merging DTMF baseband with "tones" baseband

Added stealth transmit mode

App flash section bumped to 512k
RX and TX LEDs are now used
Play dead should work again, added login option
Morse frame gen. for letters and fox hunt codes
Merged EPAR with Xylos
Made EPAR use encoders for frame gen.
Moved OOK encoders data in encoders.hpp
Simplified about screen, ui_about_demo.* files are still there

BHT city DB, keywords removed

BHT cities DB, keywords removed

Update README.md

RDS radiotext and time group generators

# This is the 2nd commit message:

Update README.md
2016-12-24 11:52:11 +01:00
furrtek
d18b6d135d Restoring jammer and RDS functionalities, please wait...
Started work on frequency manager and numbers station simulator
2016-12-23 18:31:01 +01:00
furrtek
ef0feae62b Started work on ADS-B TX baseband processor 2016-12-23 18:31:01 +01:00
furrtek
8276e5e311 Added CTCSS in Soundboard 2016-09-23 23:08:54 +02:00
furrtek
bb29efeda6 Added Nuoptix DTMF sync transmit (Disney parades, light shows...)
Soundboard ignores stereo files
2016-09-23 17:34:50 +02:00
furrtek
808f99647e Soundboard: Arbitrary samplerate support for wave files
Screenshots
2016-08-26 09:54:17 +02:00
furrtek
02f0271553 Added basic POCSAG receiver
Added Yes/no modal screen (for future tx warnings)
2016-08-23 08:45:33 +02:00
furrtek
c2fbc0c8d5 AudioTX, fixed about screen and an LCR address list bug 2016-08-17 04:17:24 +02:00
furrtek
45a754645e Merge remote-tracking branch 'upstream/master'
# Conflicts:
#	firmware/application/bitmap.hpp
#	firmware/application/receiver_model.cpp
#	firmware/application/receiver_model.hpp
#	firmware/application/touch.hpp
#	firmware/application/ui_setup.cpp
#	firmware/baseband/proc_ais.hpp
#	firmware/baseband/proc_ert.hpp
#	firmware/bootstrap/CMakeLists.txt
#	firmware/common/portapack_persistent_memory.cpp
#	firmware/common/portapack_persistent_memory.hpp
2016-08-17 02:55:34 +02:00
furrtek
38e506a108 OOK transmit is mostly working, bit durations are wrong
Simplified messages carrying data (uses shared_memory instead)
Added SymField widget (bitfield, symbol field...)
Added some space for baseband code
BMP palette loading bugfix
2016-08-06 08:49:45 +02:00
furrtek
787f656500 Testing OOK TX baseband module 2016-08-03 08:53:50 +02:00
furrtek
1d697d2201 Added PWM RSSI output for NBFM and WFM 2016-07-28 05:25:33 +02:00
furrtek
e958b4bd7d Fixed LCR transmit and AFSK baseband module 2016-07-27 21:26:03 +02:00
furrtek
739956b42b Sync with Sharebrained's fw, only Xylos TX works for now 2016-07-27 03:03:40 +02:00