diff --git a/firmware/common/max17055.cpp b/firmware/common/max17055.cpp
index 5829cbeb..de64fbf3 100644
--- a/firmware/common/max17055.cpp
+++ b/firmware/common/max17055.cpp
@@ -82,7 +82,7 @@ bool MAX17055::detect() {
 
     // Get Data from IC
     if (readMultipleRegister(0x00, _MAX17055_Data, 2, false)) {
-        if (((_MAX17055_Data[0] != 0x00) && (_MAX17055_Data[0] != 0x02)) || (_MAX17055_Data[1] != 0x00)) {
+        if (_MAX17055_Data[0] != 0x02) {
             // validate result, since i2c gives a bit of power to the ic, and sometimes it sets the init value.
             // this will return false when the ic is in init state (0x0002), but on the next iteration it'll give the good value
             if (detected_ == false) {
@@ -343,6 +343,60 @@ bool MAX17055::setDesignCapacity(const uint16_t _Capacity) {
     return _Result;
 }
 
+bool MAX17055::setFullCapRep(const uint16_t _Capacity) {
+    // Set Raw
+    uint16_t _Raw_Cap = (uint16_t)_Capacity * 2;
+
+    // Declare Default Data Array
+    uint8_t _Data[2];
+
+    // Set Data Low/High Byte
+    _Data[0] = ((_Raw_Cap & (uint16_t)0x00FF));
+    _Data[1] = ((_Raw_Cap & (uint16_t)0xFF00) >> 8);
+
+    // Set Register
+    bool _Result = writeMultipleRegister(0x10, _Data, 2);
+
+    // End Function
+    return _Result;
+}
+
+bool MAX17055::setFullCapNom(const uint16_t _Capacity) {
+    // Set Raw
+    uint16_t _Raw_Cap = (uint16_t)_Capacity * 2;
+
+    // Declare Default Data Array
+    uint8_t _Data[2];
+
+    // Set Data Low/High Byte
+    _Data[0] = ((_Raw_Cap & (uint16_t)0x00FF));
+    _Data[1] = ((_Raw_Cap & (uint16_t)0xFF00) >> 8);
+
+    // Set Register
+    bool _Result = writeMultipleRegister(0x23, _Data, 2);
+
+    // End Function
+    return _Result;
+}
+
+bool MAX17055::setRepCap(const uint16_t _Capacity) {
+    // Set Raw
+    uint16_t _Raw_Cap = (uint16_t)_Capacity * 2;
+
+    // Declare Default Data Array
+    uint8_t _Data[2];
+
+    // Set Data Low/High Byte
+    _Data[0] = ((_Raw_Cap & (uint16_t)0x00FF));
+    _Data[1] = ((_Raw_Cap & (uint16_t)0xFF00) >> 8);
+
+    // Set Register
+    bool _Result = writeMultipleRegister(0x05, _Data, 2);
+
+    // End Function
+    return _Result;
+}
+
 bool MAX17055::setMinSOC(uint8_t _Minimum_SOC) {
     // Define Data Variable
     uint8_t MAX17055_Current_Data[2];
diff --git a/firmware/common/max17055.hpp b/firmware/common/max17055.hpp
index ca6ee043..fc4ff97f 100644
--- a/firmware/common/max17055.hpp
+++ b/firmware/common/max17055.hpp
@@ -62,7 +62,7 @@
 
 // Define Maximum Voltage
 #ifndef __MAX17055_Max_Voltage__
-#define __MAX17055_Max_Voltage__ 4.175  // Maximum Voltage
+#define __MAX17055_Max_Voltage__ 4.17  // Maximum Voltage
 #endif
 
 // Define Empty Voltage
@@ -72,7 +72,7 @@
 
 // Define Recovery Voltage
 #ifndef __MAX17055_Recovery_Voltage__
-#define __MAX17055_Recovery_Voltage__ 3.7  // Recovery Voltage
+#define __MAX17055_Recovery_Voltage__ 3.1  // Recovery Voltage
 #endif
 
 // Define Maximum Current
@@ -105,12 +105,12 @@
 
 // Define Minimum SOC
 #ifndef __MAX17055_Min_SOC__
-#define __MAX17055_Min_SOC__ 20  // Minimum SOC
+#define __MAX17055_Min_SOC__ 0  // Minimum SOC
 #endif
 
 // Define Maximum SOC
 #ifndef __MAX17055_Max_SOC__
-#define __MAX17055_Max_SOC__ 90  // Maximum SOC
+#define __MAX17055_Max_SOC__ 100  // Maximum SOC
 #endif
 
 // Config1 (0x1D) Configuration
@@ -303,6 +303,9 @@ class MAX17055 {
     bool setMaxCurrent(uint16_t _Maximum_Current);
     bool setChargeTerminationCurrent(uint16_t _Charge_Termination_Current);
     bool setDesignCapacity(const uint16_t _Capacity);
+    bool setFullCapRep(const uint16_t _Capacity);
+    bool setFullCapNom(const uint16_t _Capacity);
+    bool setRepCap(const uint16_t _Capacity);
     bool setMinSOC(uint8_t _Minimum_SOC);
     bool setMaxSOC(uint8_t _Maximum_SOC);
     bool setMinTemperature(uint8_t _Minimum_Temperature);