Git-Mirrors/portapack-mayhem
1
0
Fork 0
mirror of https://github.com/eried/portapack-mayhem.git synced 2024-10-01 01:26:06 -04:00
Code Issues Packages Projects Releases Wiki Activity

Upstream merge to make new revision of PortaPack work (#206)

Browse Source 
* Power: Turn off additional peripheral clock branches.

* Update schematic with new symbol table and KiCad standard symbols.
Fix up wires.

* Schematic: Update power net labels.

* Schematic: Update footprint names to match library changes.

* Schematic: Update header vendor and part numbers.

* Schematic: Specify (arbitrary) value for PDN# net.

* Schematic: Remove fourth fiducial. Not standard practice, and was taking up valuable board space.

* Schematic: Add reference oscillator -- options for clipped sine or HCMOS output.

* Schematic: Update copyright year.

* Schematic: Remove CLKOUT to CPLD. It was a half-baked idea.

* Schematic: Add (experimental) GPS circuit.
Add note about charging circuit.
Update date and revision to match PCB.

* PCB: Update from schematic change: now revision 20180819.
Diff was extensive due to net renumbering...

* PCB: Fix GPS courtyard to accommodate crazy solder paste recommendation in integration manual.
PCB: Address DRC clearance violation between via and oscillator pad.

* PCB: Update copyright on drawing.

* Update schematic and PCB date and revision.

* gitignore: Sublime Text editor project/workspace files

* Power: Power up or power down peripheral clock at appropriate times, so firmware doesn't freeze...

* Clocking: Fix incorrect shift for CGU IDIVx_CTRL.PD field.

* LPC43xx: Add CGU IDIVx struct/union type.

* Power: Switch off unused IDIV dividers. Make note of active IDIVs and their use.

* HackRF Mode: Upgrade firmware to 2018.01.1 (API 1.02)

* MAX V CPLD: Refactor class to look more like Xilinx CoolRunner II CPLD class.

* MAX V CPLD: Add BYPASS, SAMPLE support.
Rename enter_isp -> enable, exit_isp -> disable.
Use SAMPLE at start of flash process, which somehow addresses the problem where CFM wouldn't load into SRAM (and become the active bitstream) after flashing.

* MAX V CPLD: Reverse verify data checking logic to make it a little faster.

* CPLD: After reprogramming flash, immediately clamp I/O signals, load to SRAM, and "execute" the new bitstream.

* Si5351: Refactor code, make one of the registers more type-safe.
Clock Manager: Track selected reference clock source for later use in user interface.

* Clock Manager: Add note about PPM only affecting Si5351C PLLA, which always runs from the HackRF 25MHz crystal.
It is assumed an external clock does not need adjustment, though I am open to being convinced otherwise...

* PPM UI: Show "EXT" when showing PPM adjustment and reference clock is external.

* CPLD: Add pins and logic for new PortaPack hardware feature(s).

* CPLD: Bitstream to support new hardware features.

* Clock Generator: Add a couple more setter methods for ClockControl registers.

* Clock Manager: Use shared MCU CLKIN clock control configuration constant.

* Clock Manager: Reduce MCU CLKIN driver current. 2mA should be plenty.

* Clock Manager: Remove redundant clock generator output enable.

* Bootstrap: Remove unnecessary ldscript hack to locate SPIFI mode change code in RAM.

* Bootstrap: Get CPU operating at max frequency as soon as possible.
Update SPIFI speed comment.
Make some more LPC43xx types into unions with uint32_t.

* Bootstrap: Explicitly configure IDIVB for SPIFI, despite LPC43xx bootloader setting it.

* Clock Manager: Init peripherals before CPLD reconfig. Do the clock generator setup after, so we can check presence of PortaPack reference clock with the help of the latest CPLD bitstream.

* Clock Manager: Reverse sense of conditional that determines crystal or non-crystal reference source. This is for an expected upcoming change where multiple external options can be differentiated.

* Bootstrap: Consolidate clock configuration, update SPIFI rate comment.

* Clock Manager: Use IDIVA for clock source for all peripherals, instead of PLL1. Should make switching easier going forward.
Don't use IRC as clock during initial clock manager configuration. Until we switch to GP_CLKIN, we should go flat out...

* ChibiOS M0: Change default clock speed to 204MHz, since bootstrap now maxes out clock speed before starting M0 execution.

* PortaPack IO: Expose method to set reference oscillator enable pin.

* Pin configuration: Do SPIFI pin config with other pins, in preparation for eliminating separate bootloader.

* Pin configuration: Disable input buffers on pins that are never read.

* Revert "ChibiOS M0: Change default clock speed to 204MHz, since bootstrap now maxes out clock speed before starting M0 execution."

This reverts commit c0e2bb6cc4cc656769323bdbb8ee5a16d2d5bb03.

* Remove unused board files.

* Add LPC43xx functions.

* chibios: Replace code with per-peripheral structs defining clocks, interrupts, and reset bits.

* LPC43xx: Add MCPWM peripheral struct.

* clock generator: Use recommended PLL reset register value.

Datasheet recommends a value. AN619 is quiet on the topic, claims the low nibble is default 0b0000.

* GPIO: Tweak masking of SCU function.

I don't remember why I thought this was necessary...

* HAL: Explicitly turn on timer peripheral clocks used as systicks, during init.

* SCU: Add struct to hold pin configuration.

* PAL: Add functions to address The Glitch.

https://greatscottgadgets.com/2018/02-28-we-fixed-the-glitch/

* PAL/board: New IO initialization code

Declare initial state for SCU pin config, GPIOs. Apply initial state during PAL init. Perform VAA slow turn-on to address The Glitch.

* Merge M0 and M4 to eliminate need for bootstrap firmware

During _early_init, detect if we're running on the M4 or M0.
If M4: do M4-specific core initialization, reset peripherals, speed up SPIFI clock, start M0, go to sleep.
If M0: do all the other things.

* Pins: Miscellaneous SCU configuration tweaks.

* Little code clarity improvement.

* bootstrap: Remove, not necessary.

* Clock Manager: Large re-working to support external references.

* Fix merge conflicts
This commit is contained in:
Maescool 2019-01-11 07:56:21 +01:00 committed by Furrtek
parent bbb5dc3c12
commit 920b98f7c9
71 changed files with 9292 additions and 7067 deletions
Show Stats Download Patch File Download Diff File Expand all files Collapse all files

4
.gitignore vendored
View File

@ -57,6 +57,10 @@ CMakeFiles/
# Debugging
.gdbinit*
# Editor files
*.sublime-project
*.sublime-workspace
# Host OS turds
.DS_Store
/firmware/CMakeCache.txt

7
firmware/CMakeLists.txt
View File

@ -42,14 +42,13 @@ set(FIRMWARE_FILENAME ${FIRMWARE_NAME}.bin)
add_subdirectory(application)
add_subdirectory(baseband)
add_subdirectory(bootstrap)
# NOTE: Dependencies break if the .bin files aren't included in DEPENDS. WTF, CMake?
add_custom_command(
OUTPUT ${FIRMWARE_FILENAME}
COMMAND ${MAKE_SPI_IMAGE} ${bootstrap_BINARY_DIR}/bootstrap.bin ${baseband_BINARY_DIR}/baseband.img ${application_BINARY_DIR}/application.bin ${FIRMWARE_FILENAME}
DEPENDS bootstrap baseband application ${MAKE_SPI_IMAGE}
${bootstrap_BINARY_DIR}/bootstrap.bin ${baseband_BINARY_DIR}/baseband.img ${application_BINARY_DIR}/application.bin
COMMAND ${MAKE_SPI_IMAGE} ${application_BINARY_DIR}/application.bin ${baseband_BINARY_DIR}/baseband.img ${FIRMWARE_FILENAME}
DEPENDS baseband application ${MAKE_SPI_IMAGE}
${baseband_BINARY_DIR}/baseband.img ${application_BINARY_DIR}/application.bin
VERBATIM
)

365
firmware/application/clock_manager.cpp
View File

@ -21,6 +21,8 @@
#include "clock_manager.hpp"
#include "portapack_io.hpp"
#include "hackrf_hal.hpp"
using namespace hackrf::one;
@ -41,6 +43,7 @@ static constexpr uint32_t systick_load(const uint32_t clock_source_f) {
}
constexpr uint32_t clock_source_irc_f = 12000000;
constexpr uint32_t clock_source_pll1_boot_f = 96000000;
//constexpr uint32_t clock_source_gp_clkin = 20000000;
constexpr uint32_t clock_source_pll1_step_f = 100000000;
constexpr uint32_t clock_source_pll1_f = 200000000;
@ -54,8 +57,8 @@ constexpr uint32_t si5351_vco_f = 800000000;
constexpr uint32_t i2c0_bus_f = 400000;
constexpr uint32_t i2c0_high_period_ns = 900;
constexpr I2CClockConfig i2c_clock_config_400k_slow_clock {
.clock_source_f = clock_source_irc_f,
constexpr I2CClockConfig i2c_clock_config_400k_boot_clock {
.clock_source_f = clock_source_pll1_boot_f,
.bus_f = i2c0_bus_f,
.high_period_ns = i2c0_high_period_ns,
};
@ -66,9 +69,9 @@ constexpr I2CClockConfig i2c_clock_config_400k_fast_clock {
.high_period_ns = i2c0_high_period_ns,
};
constexpr I2CConfig i2c_config_slow_clock {
.high_count = i2c_clock_config_400k_slow_clock.i2c_high_count(),
.low_count = i2c_clock_config_400k_slow_clock.i2c_low_count(),
constexpr I2CConfig i2c_config_boot_clock {
.high_count = i2c_clock_config_400k_boot_clock.i2c_high_count(),
.low_count = i2c_clock_config_400k_boot_clock.i2c_low_count(),
};
constexpr I2CConfig i2c_config_fast_clock {
@ -214,79 +217,104 @@ static_assert(si5351_ms_int_mcu_clkin.f_out() == mcu_clkin_f, "MS int MCU CLKIN
using namespace si5351;
constexpr ClockControl::Type si5351_clock_control_ms_src_xtal = ClockControl::MS_SRC_PLLA;
constexpr ClockControl::Type si5351_clock_control_ms_src_clkin = ClockControl::MS_SRC_PLLB;
static constexpr ClockControl::MultiSynthSource get_reference_clock_generator_pll(const ClockManager::ReferenceSource reference_source) {
return (reference_source == ClockManager::ReferenceSource::Xtal)
? ClockControl::MultiSynthSource::PLLA
: ClockControl::MultiSynthSource::PLLB
;
}
constexpr ClockControls si5351_clock_control_common {
ClockControl::CLK_IDRV_6mA | ClockControl::CLK_SRC_MS_Self | ClockControl::CLK_INV_Normal | ClockControl::MS_INT_Fractional | ClockControl::CLK_PDN_Power_Off,
ClockControl::CLK_IDRV_6mA | ClockControl::CLK_SRC_MS_Group | ClockControl::CLK_INV_Invert | ClockControl::MS_INT_Integer | ClockControl::CLK_PDN_Power_Off,
ClockControl::CLK_IDRV_6mA | ClockControl::CLK_SRC_MS_Group | ClockControl::CLK_INV_Normal | ClockControl::MS_INT_Integer | ClockControl::CLK_PDN_Power_Off,
ClockControl::CLK_IDRV_8mA | ClockControl::CLK_SRC_MS_Self | ClockControl::CLK_INV_Normal | ClockControl::MS_INT_Integer | ClockControl::CLK_PDN_Power_Off,
ClockControl::CLK_IDRV_8mA | ClockControl::CLK_SRC_MS_Self | ClockControl::CLK_INV_Normal | ClockControl::MS_INT_Integer | ClockControl::CLK_PDN_Power_Off,
ClockControl::CLK_IDRV_6mA | ClockControl::CLK_SRC_MS_Self | ClockControl::CLK_INV_Normal | ClockControl::MS_INT_Integer | ClockControl::CLK_PDN_Power_Off,
ClockControl::CLK_IDRV_2mA | ClockControl::CLK_SRC_MS_Self | ClockControl::CLK_INV_Normal | ClockControl::MS_INT_Fractional | ClockControl::CLK_PDN_Power_Off,
ClockControl::CLK_IDRV_6mA | ClockControl::CLK_SRC_MS_Self | ClockControl::CLK_INV_Normal | ClockControl::MS_INT_Integer | ClockControl::CLK_PDN_Power_Off,
};
constexpr ClockControls si5351_clock_control_common { {
{ ClockControl::ClockCurrentDrive::_6mA, ClockControl::ClockSource::MS_Self, ClockControl::ClockInvert::Normal, get_reference_clock_generator_pll(ClockManager::ReferenceSource::Xtal), ClockControl::MultiSynthMode::Fractional, ClockControl::ClockPowerDown::Power_Off },
{ ClockControl::ClockCurrentDrive::_6mA, ClockControl::ClockSource::MS_Group, ClockControl::ClockInvert::Invert, get_reference_clock_generator_pll(ClockManager::ReferenceSource::Xtal), ClockControl::MultiSynthMode::Integer, ClockControl::ClockPowerDown::Power_Off },
{ ClockControl::ClockCurrentDrive::_6mA, ClockControl::ClockSource::MS_Group, ClockControl::ClockInvert::Normal, get_reference_clock_generator_pll(ClockManager::ReferenceSource::Xtal), ClockControl::MultiSynthMode::Integer, ClockControl::ClockPowerDown::Power_Off },
{ ClockControl::ClockCurrentDrive::_8mA, ClockControl::ClockSource::MS_Self, ClockControl::ClockInvert::Normal, get_reference_clock_generator_pll(ClockManager::ReferenceSource::Xtal), ClockControl::MultiSynthMode::Integer, ClockControl::ClockPowerDown::Power_Off },
{ ClockControl::ClockCurrentDrive::_8mA, ClockControl::ClockSource::MS_Self, ClockControl::ClockInvert::Normal, get_reference_clock_generator_pll(ClockManager::ReferenceSource::Xtal), ClockControl::MultiSynthMode::Integer, ClockControl::ClockPowerDown::Power_Off },
{ ClockControl::ClockCurrentDrive::_6mA, ClockControl::ClockSource::MS_Self, ClockControl::ClockInvert::Normal, get_reference_clock_generator_pll(ClockManager::ReferenceSource::Xtal), ClockControl::MultiSynthMode::Integer, ClockControl::ClockPowerDown::Power_Off },
{ ClockControl::ClockCurrentDrive::_2mA, ClockControl::ClockSource::MS_Self, ClockControl::ClockInvert::Normal, get_reference_clock_generator_pll(ClockManager::ReferenceSource::Xtal), ClockControl::MultiSynthMode::Fractional, ClockControl::ClockPowerDown::Power_Off },
{ ClockControl::ClockCurrentDrive::_2mA, ClockControl::ClockSource::MS_Self, ClockControl::ClockInvert::Normal, get_reference_clock_generator_pll(ClockManager::ReferenceSource::Xtal), ClockControl::MultiSynthMode::Integer, ClockControl::ClockPowerDown::Power_Off },
} };
constexpr ClockControls si5351_clock_control_xtal {
si5351_clock_control_common[0] | si5351_clock_control_ms_src_xtal,
si5351_clock_control_common[1] | si5351_clock_control_ms_src_xtal,
si5351_clock_control_common[2] | si5351_clock_control_ms_src_xtal,
si5351_clock_control_common[3] | si5351_clock_control_ms_src_xtal,
si5351_clock_control_common[4] | si5351_clock_control_ms_src_xtal,
si5351_clock_control_common[5] | si5351_clock_control_ms_src_xtal,
si5351_clock_control_common[6] | si5351_clock_control_ms_src_xtal,
si5351_clock_control_common[7] | si5351_clock_control_ms_src_xtal,
};
ClockManager::ReferenceSource ClockManager::get_reference_source() const {
return reference_source;
}
constexpr ClockControls si5351_clock_control_clkin {
si5351_clock_control_common[0] | si5351_clock_control_ms_src_clkin,
si5351_clock_control_common[1] | si5351_clock_control_ms_src_clkin,
si5351_clock_control_common[2] | si5351_clock_control_ms_src_clkin,
si5351_clock_control_common[3] | si5351_clock_control_ms_src_clkin,
si5351_clock_control_common[4] | si5351_clock_control_ms_src_clkin,
si5351_clock_control_common[5] | si5351_clock_control_ms_src_clkin,
si5351_clock_control_common[6] | si5351_clock_control_ms_src_clkin,
si5351_clock_control_common[7] | si5351_clock_control_ms_src_clkin,
};
static void portapack_tcxo_enable() {
portapack::io.reference_oscillator(true);
void ClockManager::init() {
/* Delay >10ms at 96MHz clock speed for reference oscillator to start. */
/* Delay an additional 1ms (arbitrary) for the clock generator to detect a signal. */
volatile uint32_t delay = 240000 + 24000;
while(delay--);
}
static void portapack_tcxo_disable() {
portapack::io.reference_oscillator(false);
}
#include "hackrf_gpio.hpp"
using namespace hackrf::one;
void ClockManager::init_peripherals() {
/* Must be sure to run the M4 core from IRC when messing with the signal
* generator that sources the GP_CLKIN signal that drives the micro-
* controller's PLL1 input.
*/
/* When booting from SPIFI, PLL1 is already running at 96MHz. */
//run_from_irc();
/* When booting from SPIFI, PLL1 is already running at 288MHz. */
/* TODO: Refactor this blob, there's too much knowledge about post-boot
* state, which can change depending on where we're running from -- SPIFI
* or RAM or ???
*/
update_peripheral_clocks(cgu::CLK_SEL::IRC);
start_peripherals(cgu::CLK_SEL::IRC);
// PLL1 is running at 288 MHz upon bootstrap exit.
LPC_CGU->IDIVA_CTRL.word =
( 0 << 0) /* PD */
| ( 2 << 2) /* IDIV (/3) */
| ( 1 << 11) /* AUTOBLOCK */
| ( 9 << 24) /* PLL1 */
;
const auto clk_sel = cgu::CLK_SEL::IDIVA;
set_clock(LPC_CGU->BASE_M4_CLK, clk_sel);
set_clock(LPC_CGU->BASE_PERIPH_CLK, clk_sel);
set_clock(LPC_CGU->BASE_APB1_CLK, clk_sel);
set_clock(LPC_CGU->BASE_APB3_CLK, clk_sel);
set_clock(LPC_CGU->BASE_SDIO_CLK, clk_sel);
set_clock(LPC_CGU->BASE_SSP1_CLK, clk_sel);
// IDIVC should no longer be in use.
LPC_CGU->IDIVC_CTRL.PD = 1;
i2c0.start(i2c_config_boot_clock);
}
void ClockManager::init_clock_generator() {
clock_generator.reset();
clock_generator.set_crystal_internal_load_capacitance(CrystalInternalLoadCapacitance::XTAL_CL_8pF);
clock_generator.enable_fanout();
clock_generator.set_pll_input_sources(si5351_pll_input_sources);
const auto clkin_present = !clock_generator.clkin_loss_of_signal();
auto clkin_valid = false;
if( clkin_present ) {
// Measure Si5351B CLKIN frequency against LPC43xx IRC oscillator
set_gp_clkin_to_clkin_direct();
start_frequency_monitor_measurement(cgu::CLK_SEL::GP_CLKIN);
wait_For_frequency_monitor_measurement_done();
const auto clkin_frequency = get_frequency_monitor_measurement_in_hertz();
// CLKIN is required to be 10MHz. FREQ_MON measurement is accurate to 1.5%
// due to LPC43xx IRC oscillator precision.
clkin_valid = (clkin_frequency >= 9850000) && (clkin_frequency <= 10150000);
}
clock_generator.set_clock_control(
clkin_valid ? si5351_clock_control_clkin : si5351_clock_control_xtal
clock_generator_output_mcu_clkin,
si5351_clock_control_common[clock_generator_output_mcu_clkin].clk_src(ClockControl::ClockSource::CLKIN).clk_pdn(ClockControl::ClockPowerDown::Power_On)
);
clock_generator.enable_output(clock_generator_output_mcu_clkin);
const auto reference_source = choose_reference_source();
clock_generator.disable_output(clock_generator_output_mcu_clkin);
const auto ref_pll = get_reference_clock_generator_pll(reference_source);
const ClockControls si5351_clock_control = ClockControls { {
si5351_clock_control_common[0].ms_src(ref_pll),
si5351_clock_control_common[1].ms_src(ref_pll),
si5351_clock_control_common[2].ms_src(ref_pll),
si5351_clock_control_common[3].ms_src(ref_pll),
si5351_clock_control_common[4].ms_src(ref_pll),
si5351_clock_control_common[5].ms_src(ref_pll),
si5351_clock_control_common[6].ms_src(ref_pll),
si5351_clock_control_common[7].ms_src(ref_pll),
} };
clock_generator.set_clock_control(si5351_clock_control);
clock_generator.write(si5351_pll_a_xtal_reg);
clock_generator.write(si5351_pll_b_clkin_reg);
@ -297,22 +325,65 @@ void ClockManager::init() {
clock_generator.write(si5351_ms_4_reg);
clock_generator.write(si5351_ms_5_reg);
clock_generator.write(si5351_ms6_7_off_mcu_clkin_reg);
clock_generator.reset_plls();
// Wait for both PLLs to lock.
// TODO: Disable the unused PLL?
while((clock_generator.device_status() & 0x60) != 0);
clock_generator.set_clock_control(
clock_generator_output_mcu_clkin,
si5351_clock_control_common[clock_generator_output_mcu_clkin].ms_src(ref_pll).clk_pdn(ClockControl::ClockPowerDown::Power_On)
);
clock_generator.enable_output(clock_generator_output_mcu_clkin);
set_m4_clock_to_pll1();
}
uint32_t ClockManager::measure_gp_clkin_frequency() {
// Measure Si5351B CLKIN frequency against LPC43xx IRC oscillator
start_frequency_monitor_measurement(cgu::CLK_SEL::GP_CLKIN);
wait_For_frequency_monitor_measurement_done();
return get_frequency_monitor_measurement_in_hertz();
}
ClockManager::ReferenceSource ClockManager::detect_reference_source() {
if( clock_generator.clkin_loss_of_signal() ) {
// No external reference. Turn on PortaPack reference (if present).
portapack_tcxo_enable();
if( clock_generator.clkin_loss_of_signal() ) {
// No PortaPack reference was detected. Choose the HackRF crystal as the reference.
return ReferenceSource::Xtal;
} else {
return ReferenceSource::PortaPack;
}
} else {
return ReferenceSource::External;
}
}
ClockManager::ReferenceSource ClockManager::choose_reference_source() {
const auto detected_reference = detect_reference_source();
if( (detected_reference == ReferenceSource::External) ||
(detected_reference == ReferenceSource::PortaPack) ) {
const auto frequency = measure_gp_clkin_frequency();
if( (frequency >= 9850000) && (frequency <= 10150000) ) {
return detected_reference;
}
}
portapack_tcxo_disable();
return ReferenceSource::Xtal;
}
void ClockManager::shutdown() {
run_from_irc();
// run_from_irc();
clock_generator.reset();
}
void ClockManager::run_from_irc() {
change_clock_configuration(cgu::CLK_SEL::IRC);
}
void ClockManager::run_at_full_speed() {
change_clock_configuration(cgu::CLK_SEL::PLL1);
}
void ClockManager::enable_codec_clocks() {
clock_generator.enable_clock(clock_generator_output_codec);
clock_generator.enable_clock(clock_generator_output_cpld);
@ -373,6 +444,10 @@ void ClockManager::set_sampling_frequency(const uint32_t frequency) {
}
void ClockManager::set_reference_ppb(const int32_t ppb) {
/* NOTE: This adjustment only affects PLLA, which is derived from the 25MHz crystal.
* It is assumed an external clock coming in to PLLB is sufficiently accurate as to not need adjustment.
* TODO: Revisit the above policy. It may be good to allow adjustment of the external reference too.
*/
constexpr uint32_t pll_multiplier = si5351_pll_xtal_25m.a;
constexpr uint32_t denominator = 1000000 / pll_multiplier;
const uint32_t new_a = (ppb >= 0) ? pll_multiplier : (pll_multiplier - 1);
@ -389,59 +464,6 @@ void ClockManager::set_reference_ppb(const int32_t ppb) {
clock_generator.write(pll_a_reg);
}
void ClockManager::change_clock_configuration(const cgu::CLK_SEL clk_sel) {
/* If starting PLL1, turn on the clock feeding GP_CLKIN */
if( clk_sel == cgu::CLK_SEL::PLL1 ) {
enable_gp_clkin_source();
}
if( clk_sel == cgu::CLK_SEL::XTAL ) {
enable_xtal_oscillator();
}
stop_peripherals();
set_m4_clock_to_irc();
update_peripheral_clocks(clk_sel);
if( clk_sel == cgu::CLK_SEL::PLL1 ) {
set_m4_clock_to_pll1();
} else {
power_down_pll1();
}
start_peripherals(clk_sel);
if( clk_sel != cgu::CLK_SEL::XTAL ) {
disable_xtal_oscillator();
}
/* If not using PLL1, disable clock feeding GP_CLKIN */
if( clk_sel != cgu::CLK_SEL::PLL1 ) {
stop_audio_pll();
disable_gp_clkin_source();
}
}
void ClockManager::enable_gp_clkin_source() {
clock_generator.enable_clock(clock_generator_output_mcu_clkin);
clock_generator.enable_output(clock_generator_output_mcu_clkin);
}
void ClockManager::disable_gp_clkin_source() {
clock_generator.disable_clock(clock_generator_output_mcu_clkin);
clock_generator.disable_output(clock_generator_output_mcu_clkin);
}
void ClockManager::set_gp_clkin_to_clkin_direct() {
clock_generator.set_clock_control(
clock_generator_output_mcu_clkin,
{ ClockControl::CLK_IDRV_2mA | ClockControl::CLK_SRC_CLKIN | ClockControl::CLK_INV_Normal | ClockControl::MS_INT_Integer | ClockControl::CLK_PDN_Power_On }
);
enable_gp_clkin_source();
}
void ClockManager::start_frequency_monitor_measurement(const cgu::CLK_SEL clk_sel) {
// Measure a clock input for 480 cycles of the LPC43xx IRC.
LPC_CGU->FREQ_MON = LPC_CGU_FREQ_MON_Type {
@ -475,48 +497,94 @@ void ClockManager::disable_xtal_oscillator() {
LPC_CGU->XTAL_OSC_CTRL.ENABLE = 0;
}
void ClockManager::set_m4_clock_to_irc() {
/* Set M4 clock to safe default speed (~12MHz IRC) */
set_clock(LPC_CGU->BASE_M4_CLK, cgu::CLK_SEL::IRC);
systick_adjust_period(systick_count_irc);
//_clock_f = clock_source_irc_f;
halLPCSetSystemClock(clock_source_irc_f);
}
void ClockManager::set_m4_clock_to_pll1() {
/* Incantation from LPC43xx UM10503 section 12.2.1.1, to bring the M4
* core clock speed to the 110 - 204MHz range.
*/
/* Set M4 clock to safe default speed (~12MHz IRC) */
i2c0.stop();
// All other peripherals capable of running at 204 MHz.
LPC_CGU->IDIVA_CTRL.word =
( 0 << 0) /* PD */
| ( 0 << 2) /* IDIV (/1) */
| ( 1 << 11) /* AUTOBLOCK */
| ( 1 << 24) /* IRC */
;
systick_adjust_period(systick_count_irc);
halLPCSetSystemClock(clock_source_irc_f);
// SPIFI clock
LPC_CGU->IDIVB_CTRL.word =
( 0 << 0) /* PD */
| ( 0 << 2) /* IDIV (/1) */
| ( 1 << 11) /* AUTOBLOCK */
| ( 1 << 24) /* IRC */
;
/* Step into the 90-110MHz M4 clock range */
/* Fclkin = 40M
* /N=2 = 20M = PFDin
* Fcco = PFDin * (M=10) = 200M
* Fclk = Fcco / (2*(P=1)) = 100M
*/
cgu::pll1::ctrl({
.pd = 0,
.pd = 1,
.bypass = 0,
.fbsel = 0,
.direct = 0,
.psel = 0,
.autoblock = 1,
.nsel = 0,
.msel = 4,
.nsel = 1,
.msel = 9,
.clk_sel = cgu::CLK_SEL::GP_CLKIN,
});
cgu::pll1::enable();
while( !cgu::pll1::is_locked() );
/* Switch M4 clock to PLL1 running at intermediate rate */
set_clock(LPC_CGU->BASE_M4_CLK, cgu::CLK_SEL::PLL1);
// All other peripherals capable of running at 204 MHz.
LPC_CGU->IDIVA_CTRL.word =
( 0 << 0) /* PD */
| ( 0 << 2) /* IDIV (/1) */
| ( 1 << 11) /* AUTOBLOCK */
| ( 9 << 24) /* PLL1 */
;
systick_adjust_period(systick_count_pll1_step);
//_clock_f = clock_source_pll1_step_f;
halLPCSetSystemClock(clock_source_pll1_step_f);
// SPIFI clock
LPC_CGU->IDIVB_CTRL.word =
( 0 << 0) /* PD */
| ( 0 << 2) /* IDIV (/1) */
| ( 1 << 11) /* AUTO BLOCK */
| ( 9 << 24) /* PLL1 */
;
/* Delay >50us at 90-110MHz clock speed */
volatile uint32_t delay = 1400;
while(delay--);
// SPIFI clock
LPC_CGU->IDIVB_CTRL.word =
( 0 << 0) /* PD */
| ( 1 << 2) /* IDIV (/2) */
| ( 1 << 11) /* AUTOBLOCK */
| ( 9 << 24) /* PLL1 */
;
/* Remove /2P divider from PLL1 output to achieve full speed */
cgu::pll1::direct();
systick_adjust_period(systick_count_pll1);
//_clock_f = clock_source_pll1_f;
halLPCSetSystemClock(clock_source_pll1_f);
i2c0.start(i2c_config_fast_clock);
}
void ClockManager::power_down_pll1() {
@ -565,8 +633,8 @@ void ClockManager::start_audio_pll() {
}
void ClockManager::set_base_audio_clock_divider(const size_t divisor) {
LPC_CGU->IDIVC_CTRL =
(0 << 1)
LPC_CGU->IDIVC_CTRL.word =
(0 << 0)
| ((divisor - 1) << 2)
| (1 << 11)
| (toUType(cgu::CLK_SEL::PLL0AUDIO) << 24)
@ -582,28 +650,3 @@ void ClockManager::stop_audio_pll() {
void ClockManager::stop_peripherals() {
i2c0.stop();
}
void ClockManager::update_peripheral_clocks(const cgu::CLK_SEL clk_sel) {
/* TODO: Extract a structure to represent clock settings for different
* modes.
*/
set_clock(LPC_CGU->BASE_PERIPH_CLK, clk_sel);
LPC_CGU->IDIVB_CTRL =
(0 << 1)
| (1 << 2)
| (1 << 11)
| (toUType(clk_sel) << 24)
;
set_clock(LPC_CGU->BASE_APB1_CLK, clk_sel);
set_clock(LPC_CGU->BASE_APB3_CLK, clk_sel);
set_clock(LPC_CGU->BASE_SDIO_CLK, clk_sel);
set_clock(LPC_CGU->BASE_SSP1_CLK, clk_sel);
}
void ClockManager::start_peripherals(const cgu::CLK_SEL clk_sel) {
/* Start APB1 peripherals considering new clock */
i2c0.start((clk_sel == cgu::CLK_SEL::PLL1)
? i2c_config_fast_clock
: i2c_config_slow_clock
);
}

29
firmware/application/clock_manager.hpp
View File

@ -33,21 +33,26 @@ using namespace lpc43xx;
class ClockManager {
public:
enum ReferenceSource {
Xtal, /* 10 MHz crystal onboard the HackRF */
PortaPack, /* 10 MHz TCXO on 20180820 and newer PortaPack revisions. */
External, /* HackRF external clock input SMA, or from PortaPack with TCXO feature. */
};
constexpr ClockManager(
I2C& i2c0,
si5351::Si5351& clock_generator
) : i2c0(i2c0),
clock_generator(clock_generator)/*,
clock_generator(clock_generator),
reference_source(ReferenceSource::Xtal)/*
_clock_f(0)*/
{
}
void init();
void init_peripherals();
void init_clock_generator();
void shutdown();
void run_from_irc();
void run_at_full_speed();
void start_audio_pll();
void stop_audio_pll();
@ -68,15 +73,14 @@ public:
uint32_t get_frequency_monitor_measurement_in_hertz();
ReferenceSource get_reference_source() const;
private:
I2C& i2c0;
si5351::Si5351& clock_generator;
ReferenceSource reference_source;
//uint32_t _clock_f;
void change_clock_configuration(const cgu::CLK_SEL clk_sel);
void enable_gp_clkin_source();
void disable_gp_clkin_source();
void set_gp_clkin_to_clkin_direct();
void start_frequency_monitor_measurement(const cgu::CLK_SEL clk_sel);
@ -91,8 +95,11 @@ private:
void power_down_pll1();
void stop_peripherals();
void update_peripheral_clocks(const cgu::CLK_SEL clk_sel);
void start_peripherals(const cgu::CLK_SEL clk_sel);
uint32_t measure_gp_clkin_frequency();
ClockManager::ReferenceSource detect_reference_source();
ClockManager::ReferenceSource choose_reference_source();
};
#endif/*__CLOCK_MANAGER_H__*/

8
firmware/application/hw/si5351.cpp
View File

@ -39,10 +39,10 @@ void Si5351::reset() {
write_register(Register::PLLInputSource, 0x00);
_clock_control = {
ClockControl::CLK_PDN_Power_Off, ClockControl::CLK_PDN_Power_Off,
ClockControl::CLK_PDN_Power_Off, ClockControl::CLK_PDN_Power_Off,
ClockControl::CLK_PDN_Power_Off, ClockControl::CLK_PDN_Power_Off,
ClockControl::CLK_PDN_Power_Off, ClockControl::CLK_PDN_Power_Off
ClockControl::power_off(), ClockControl::power_off(),
ClockControl::power_off(), ClockControl::power_off(),
ClockControl::power_off(), ClockControl::power_off(),
ClockControl::power_off(), ClockControl::power_off()
};
update_all_clock_control();

166
firmware/application/hw/si5351.hpp
View File

@ -33,6 +33,8 @@
namespace si5351 {
using reg_t = uint8_t;
namespace Register {
enum {
DeviceStatus = 0,
@ -96,41 +98,101 @@ namespace DeviceStatus {
};
}
namespace ClockControl {
using Type = uint8_t;
enum {
CLK_IDRV_Mask = (0b11 << 0),
CLK_IDRV_2mA = (0b00 << 0),
CLK_IDRV_4mA = (0b01 << 0),
CLK_IDRV_6mA = (0b10 << 0),
CLK_IDRV_8mA = (0b11 << 0),
CLK_SRC_Mask = (0b11 << 2),
CLK_SRC_XTAL = (0b00 << 2),
CLK_SRC_CLKIN = (0b01 << 2),
CLK_SRC_MS_Group = (0b10 << 2),
CLK_SRC_MS_Self = (0b11 << 2),
CLK_INV_Mask = (1 << 4),
CLK_INV_Normal = (0 << 4),
CLK_INV_Invert = (1 << 4),
MS_SRC_Mask = (1 << 5),
MS_SRC_PLLA = (0 << 5),
MS_SRC_PLLB = (1 << 5),
MS_INT_Mask = (1 << 6),
MS_INT_Fractional = (0 << 6),
MS_INT_Integer = (1 << 6),
CLK_PDN_Mask = (1 << 7),
CLK_PDN_Power_On = (0 << 7),
CLK_PDN_Power_Off = (1 << 7),
struct ClockControl {
enum ClockCurrentDrive {
_2mA = 0b00,
_4mA = 0b01,
_6mA = 0b10,
_8mA = 0b11,
};
}
using ClockControls = std::array<ClockControl::Type, 8>;
enum ClockSource {
Xtal = 0b00,
CLKIN = 0b01,
MS_Group = 0b10,
MS_Self = 0b11,
};
enum ClockInvert {
Normal = 0,
Invert = 1,
};
enum MultiSynthSource {
PLLA = 0,
PLLB = 1,
};
enum MultiSynthMode {
Fractional = 0,
Integer = 1,
};
enum ClockPowerDown {
Power_On = 0,
Power_Off = 1,
};
reg_t CLK_IDRV : 2;
reg_t CLK_SRC : 2;
reg_t CLK_INV : 1;
reg_t MS_SRC : 1;
reg_t MS_INT : 1;
reg_t CLK_PDN : 1;
constexpr ClockControl(
ClockCurrentDrive clk_idrv,
ClockSource clk_src,
ClockInvert clk_inv,
MultiSynthSource ms_src,
MultiSynthMode ms_int,
ClockPowerDown clk_pdn
) : CLK_IDRV(clk_idrv),
CLK_SRC(clk_src),
CLK_INV(clk_inv),
MS_SRC(ms_src),
MS_INT(ms_int),
CLK_PDN(clk_pdn)
{
}
ClockControl clk_src(const ClockSource value) const {
auto result = *this;
result.CLK_SRC = value;
return result;
}
ClockControl ms_src(const MultiSynthSource value) const {
auto result = *this;
result.MS_SRC = value;
return result;
}
ClockControl clk_pdn(const ClockPowerDown value) const {
auto result = *this;
result.CLK_PDN = value;
return result;
}
constexpr operator reg_t() {
return *reinterpret_cast<reg_t*>(this);
}
static constexpr ClockControl power_off() {
return {
ClockCurrentDrive::_2mA,
ClockSource::Xtal,
ClockInvert::Normal,
MultiSynthSource::PLLA,
MultiSynthMode::Fractional,
ClockPowerDown::Power_Off,
};
}
};
static_assert(sizeof(ClockControl) == 1, "ClockControl size is not eight bits");
using ClockControls = std::array<ClockControl, 8>;
namespace CrystalInternalLoadCapacitance {
using Type = uint8_t;
@ -289,10 +351,10 @@ public:
constexpr Si5351(I2C& bus, I2C::address_t address) :
_clock_control({
ClockControl::CLK_PDN_Power_Off, ClockControl::CLK_PDN_Power_Off,
ClockControl::CLK_PDN_Power_Off, ClockControl::CLK_PDN_Power_Off,
ClockControl::CLK_PDN_Power_Off, ClockControl::CLK_PDN_Power_Off,
ClockControl::CLK_PDN_Power_Off, ClockControl::CLK_PDN_Power_Off
ClockControl::power_off(), ClockControl::power_off(),
ClockControl::power_off(), ClockControl::power_off(),
ClockControl::power_off(), ClockControl::power_off(),
ClockControl::power_off(), ClockControl::power_off()
}),
_bus(bus),
_address(address),
@ -302,6 +364,10 @@ public:
void reset();
uint8_t device_status() {
return read_register(Register::DeviceStatus);
}
void wait_for_device_ready() {
while(device_status() & 0x80);
}
@ -315,7 +381,8 @@ public:
}
void reset_plls() {
write_register(Register::PLLReset, 0xa0);
// Datasheet recommends value 0xac, though the low nibble bits are not defined in AN619.
write_register(Register::PLLReset, 0xac);
}
regvalue_t read_register(const uint8_t reg);
@ -373,18 +440,18 @@ public:
update_all_clock_control();
}
void set_clock_control(const size_t n, const ClockControl::Type clock_control) {
void set_clock_control(const size_t n, const ClockControl clock_control) {
_clock_control[n] = clock_control;
write_register(Register::CLKControl_Base + n, _clock_control[n]);
}
void enable_clock(const size_t n) {
_clock_control[n] &= ~ClockControl::CLK_PDN_Mask;
_clock_control[n].CLK_PDN = ClockControl::ClockPowerDown::Power_On;
write_register(Register::CLKControl_Base + n, _clock_control[n]);
}
void disable_clock(const size_t n) {
_clock_control[n] |= ClockControl::CLK_PDN_Mask;
_clock_control[n].CLK_PDN = ClockControl::ClockPowerDown::Power_Off;
write_register(Register::CLKControl_Base + n, _clock_control[n]);
}
@ -401,21 +468,26 @@ public:
}
private:
std::array<uint8_t, 8> _clock_control;
ClockControls _clock_control;
I2C& _bus;
const I2C::address_t _address;
uint8_t _output_enable;
uint8_t device_status() {
return read_register(Register::DeviceStatus);
}
void update_output_enable_control() {
write_register(Register::OutputEnableControl, ~_output_enable);
}
void update_all_clock_control() {
write_registers(Register::CLKControl_Base, _clock_control);
write_registers(Register::CLKControl_Base, std::array<reg_t, 8> { {
_clock_control[0],
_clock_control[1],
_clock_control[2],
_clock_control[3],
_clock_control[4],
_clock_control[5],
_clock_control[6],
_clock_control[7],
} });
}
};

223
firmware/application/portapack.cpp
View File

@ -105,48 +105,11 @@ void poll_ext_clock() {
prev_clkin_status = clkin_status;
StatusRefreshMessage message { };
EventDispatcher::send_message(message);
clock_manager.init();
clock_manager.init_peripherals();
}
}
class Power {
public:
void init() {
/* VAA powers:
* MAX5864 analog section.
* MAX2837 registers and other functions.
* RFFC5072 analog section.
*
* Beware that power applied to pins of the MAX2837 may
* show up on VAA and start powering other components on the
* VAA net. So turn on VAA before driving pins from MCU to
* MAX2837.
*/
/* Turn on VAA */
gpio_vaa_disable.clear();
gpio_vaa_disable.output();
/* 1V8 powers CPLD internals.
*/
/* Turn on 1V8 */
gpio_1v8_enable.set();
gpio_1v8_enable.output();
/* Set VREGMODE for switching regulator on HackRF One */
gpio_vregmode.set();
gpio_vregmode.output();
}
void shutdown() {
gpio_1v8_enable.clear();
gpio_vaa_disable.set();
}
private:
};
static Power power;
enum class PortaPackModel {
R1_20150901,
@ -187,6 +150,25 @@ Backlight* backlight() {
: static_cast<portapack::Backlight*>(&backlight_on_off);
}
static void configure_unused_mcu_peripherals_power_down(const bool power_down) {
LPC_CGU->IDIVD_CTRL.PD = power_down;
LPC_CGU->IDIVE_CTRL.PD = power_down;
LPC_CGU->BASE_USB1_CLK.PD = power_down;
LPC_CGU->BASE_SPI_CLK.PD = power_down;
LPC_CGU->BASE_PHY_RX_CLK.PD = power_down;
LPC_CGU->BASE_PHY_TX_CLK.PD = power_down;
LPC_CGU->BASE_LCD_CLK.PD = power_down;
LPC_CGU->BASE_SSP0_CLK.PD = power_down;
LPC_CGU->BASE_UART0_CLK.PD = power_down;
LPC_CGU->BASE_UART1_CLK.PD = power_down;
LPC_CGU->BASE_UART2_CLK.PD = power_down;
LPC_CGU->BASE_UART3_CLK.PD = power_down;
LPC_CGU->BASE_OUT_CLK.PD = power_down;
LPC_CGU->BASE_CGU_OUT0_CLK.PD = power_down;
LPC_CGU->BASE_CGU_OUT1_CLK.PD = power_down;
}
static void configure_unused_mcu_peripherals(const bool enabled) {
/* Disabling these peripherals reduces "idle" (PortaPack at main
* menu) current by 42mA.
@ -196,9 +178,17 @@ static void configure_unused_mcu_peripherals(const bool enabled) {
*
* RITIMER: M0 SysTick substitute (because M0 has no SysTick)
* TIMER3: M0 cycle/PCLK counter
* IDIVB: Clock for SPI (set up in bootstrap code)
* IDIVC: I2S audio clock
*/
const uint32_t clock_run_state = enabled ? 1 : 0;
const bool power_down = !enabled;
if( power_down == false ) {
// Power up peripheral clocks *before* enabling run state.
configure_unused_mcu_peripherals_power_down(power_down);
}
LPC_CCU1->CLK_APB3_I2C1_CFG.RUN = clock_run_state;
LPC_CCU1->CLK_APB3_DAC_CFG.RUN = clock_run_state;
@ -230,6 +220,11 @@ static void configure_unused_mcu_peripherals(const bool enabled) {
LPC_CCU2->CLK_APB0_UART1_CFG.RUN = clock_run_state;
LPC_CCU2->CLK_APB0_USART0_CFG.RUN = clock_run_state;
LPC_CCU2->CLK_APB0_SSP0_CFG.RUN = clock_run_state;
if( power_down == true ) {
// Power down peripheral clocks *after* disabling run state.
configure_unused_mcu_peripherals_power_down(power_down);
}
}
static void disable_unused_mcu_peripheral_clocks() {
@ -243,9 +238,6 @@ static void enable_unused_mcu_peripheral_clocks() {
static void shutdown_base() {
clock_manager.shutdown();
power.shutdown();
// TODO: Wait a bit for supplies to discharge?
chSysDisable();
systick_stop();
@ -256,49 +248,8 @@ static void shutdown_base() {
}
bool init() {
for(const auto& pin : pins) {
pin.init();
}
clock_manager.init_peripherals();
/* Configure other pins */
/* Glitch filter operates at 3ns instead of 50ns due to the WM8731
* returning an ACK very fast (170ns) and confusing the I2C state
* machine into thinking there was a bus error. It looks like the
* MCU sees SDA fall before SCL falls, indicating a START at the
* point an ACK is expected. With the glitch filter off or set to
* 3ns, it's probably still a bit tight timing-wise, but improves
* reliability on some problem units.
*/
LPC_SCU->SFSI2C0 =
(1U << 0) // SCL: 3ns glitch
| (0U << 2) // SCL: Standard/Fast mode
| (1U << 3) // SCL: Input enabled
| (0U << 7) // SCL: Enable input glitch filter
| (1U << 8) // SDA: 3ns glitch
| (0U << 10) // SDA: Standard/Fast mode
| (1U << 11) // SDA: Input enabled
| (0U << 15) // SDA: Enable input glitch filter
;
disable_unused_mcu_peripheral_clocks();
LPC_CREG->CREG0 |= (1 << 5); // Disable USB0 PHY
power.init();
gpio_max5864_select.set();
gpio_max5864_select.output();
gpio_max2837_select.set();
gpio_max2837_select.output();
led_usb.setup();
led_rx.setup();
led_tx.setup();
clock_manager.init();
clock_manager.set_reference_ppb(persistent_memory::correction_ppb());
clock_manager.run_at_full_speed();
if( !portapack::cpld::update_if_necessary(portapack_cpld_config()) ) {
shutdown_base();
@ -311,6 +262,9 @@ bool init() {
portapack::io.init();
clock_manager.init_clock_generator();
clock_manager.set_reference_ppb(persistent_memory::correction_ppb());
audio::init(portapack_audio_codec());
clock_manager.enable_first_if_clock();
@ -340,12 +294,109 @@ void shutdown() {
shutdown_base();
}
/* Bootstrap runs from SPIFI on the M4, immediately after the LPC43xx built-in
* boot ROM runs.
*/
/* After boot ROM executes:
* PLL1 is at 288MHz (IRC * 24)
* IDIVB_CTRL = PLL1 / 9 = 32MHz
* IDIVC_CTRL = PLL1 / 3 = 96MHz
* BASE_SPIFI_CLK.CLK_SEL = IDIVB
* BASE_M4_CLK.CLK_SEL = IDIVC?
*/
static void configure_spifi(void) {
constexpr Pin pins_spifi[] = {
{ 3, 3, PinConfig::spifi_sck(3) }, /* SPIFI_SCK: W25Q80BV.CLK(I), enable input buffer for timing feedback */
{ 3, 4, PinConfig::spifi_inout(3) }, /* SPIFI_SIO3/P82: W25Q80BV.HOLD(IO) */
{ 3, 5, PinConfig::spifi_inout(3) }, /* SPIFI_SIO2/P81: W25Q80BV.WP(IO) */
{ 3, 6, PinConfig::spifi_inout(3) }, /* SPIFI_MISO: W25Q80BV.DO(IO) */
{ 3, 7, PinConfig::spifi_inout(3) }, /* SPIFI_MOSI: W25Q80BV.DI(IO) */
{ 3, 8, PinConfig::spifi_cs(3) }, /* SPIFI_CS/P68: W25Q80BV.CS(I) */
};
for(const auto& pin : pins_spifi) {
pin.init();
}
/* Tweak SPIFI mode */
LPC_SPIFI->CTRL =
(0xffff << 0) /* Timeout */
| (0x1 << 16) /* CS high time in "clocks - 1" */
| (0 << 21) /* 0: Attempt speculative prefetch on data accesses */
| (0 << 22) /* 0: No interrupt on command ended */
| (0 << 23) /* 0: SCK driven low after rising edge at which last bit of command is captured. Stays low while CS# is high. */
| (0 << 27) /* 0: Cache prefetching enabled */
| (0 << 28) /* 0: Quad protocol, IO3:0 */
| (1 << 29) /* 1: Read data sampled on falling edge of clock */
| (1 << 30) /* 1: Read data is sampled using feedback clock from SCK pin */
| (0 << 31) /* 0: DMA request disabled */
;
/* Throttle up the SPIFI interface to 96MHz (IDIVA=PLL1 / 3) */
LPC_CGU->IDIVB_CTRL.word =
( 0 << 0) /* PD */
| ( 2 << 2) /* IDIV (/3) */
| ( 1 << 11) /* AUTOBLOCK */
| ( 9 << 24) /* PLL1 */
;
}
extern "C" {
void __early_init(void) {
/*
* Upon exit from bootloader into SPIFI boot mode:
*
* Enabled:
* PLL1: IRC, M=/24, N=/1, P=/1, autoblock, direct = 288 MHz
* IDIVA: IRC /1 = 12 MHz
* IDIVB: PLL1 /9, autoblock = 32 MHz
* IDIVC: PLL1 /3, autoblock = 96 MHz
* IDIVD: IRC /1 = 12 MHz
* IDIVE: IRC /1 = 12 MHz
* BASE_M4_CLK: IDIVC, autoblock
* BASE_SPIFI_CLK: IDIVB, autoblock
*
* Disabled:
* XTAL_OSC
* PLL0USB
* PLL0AUDIO
*/
/* LPC43xx M4 takes about 500 usec to get to __early_init
* Before __early_init, LPC bootloader runs and starts our code. In user code, the process stack
* is initialized, hardware floating point is initialized, and stacks are zeroed,
*/
const uint32_t CORTEX_M4_CPUID = 0x410fc240;
const uint32_t CORTEX_M4_CPUID_MASK = 0xff0ffff0;
if( (SCB->CPUID & CORTEX_M4_CPUID_MASK) == CORTEX_M4_CPUID ) {
/* Enable unaligned exception handler */
SCB_CCR |= (1 << 3);
/* Enable MemManage, BusFault, UsageFault exception handlers */
SCB_SHCSR |= (1 << 18) | (1 << 17) | (1 << 16);
reset();
// disable_unused_mcu_peripheral_clocks();
configure_spifi();
LPC_CCU1->CLK_M4_M0APP_CFG.RUN = true;
LPC_CREG->M0APPMEMMAP = LPC_SPIFI_DATA_CACHED_BASE + 0x0;
LPC_RGU->RESET_CTRL[1] = 0;
/* Prevent the M4 from doing any more initializing by sleep-waiting forever...
* ...until the M0 resets the M4 with some code to run.
*/
while(1) {
__WFE();
}
}
}
void __late_init(void) {
reset();
/*
* System initializations.
* - HAL initialization, this also initializes the configured device drivers

9
firmware/application/ui/ui_receiver.cpp
View File

@ -250,9 +250,14 @@ FrequencyOptionsView::FrequencyOptionsView(
add_children({
&text_step,
&field_step,
&field_ppm,
&text_ppm,
});
if( portapack::clock_manager.get_reference_source() == ClockManager::ReferenceSource::External ) {
add_child(&text_ext);
} else {
add_child(&field_ppm);
}
add_child(&text_ppm);
}
void FrequencyOptionsView::set_step(rf::Frequency f) {

5
firmware/application/ui/ui_receiver.hpp
View File

@ -293,7 +293,10 @@ private:
1,
'0',
};
Text text_ext {
{ 23 * 8, 0 * 16, 3 * 8, 1 * 16 },
"EXT",
};
Text text_ppm {
{ 27 * 8, 0 * 16, 3 * 8, 16 },
"PPM",

212
firmware/bootstrap/CMakeLists.txt
View File

@ -1,212 +0,0 @@
#
# Copyright (C) 2014 Jared Boone, ShareBrained Technology, Inc.
#
# This file is part of PortaPack.
#
# This program is free software; you can redistribute it and/or modify
# it under the terms of the GNU General Public License as published by
# the Free Software Foundation; either version 2, or (at your option)
# any later version.
#
# This program is distributed in the hope that it will be useful,
# but WITHOUT ANY WARRANTY; without even the implied warranty of
# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
# GNU General Public License for more details.
#
# You should have received a copy of the GNU General Public License
# along with this program; see the file COPYING. If not, write to
# the Free Software Foundation, Inc., 51 Franklin Street,
# Boston, MA 02110-1301, USA.
#
##############################################################################
# Build global options
# NOTE: Can be overridden externally.
#
enable_language(C CXX ASM)
project(bootstrap)
# Compiler options here.
set(USE_OPT "-Os -g -falign-functions=16 -fno-math-errno --specs=nano.specs")
# C specific options here (added to USE_OPT).
set(USE_COPT "-std=gnu99")
# C++ specific options here (added to USE_OPT).
set(USE_CPPOPT "-std=c++17 -fno-rtti -fno-exceptions -Weffc++ -Wuninitialized")
# Enable this if you want the linker to remove unused code and data
set(USE_LINK_GC yes)
# Linker extra options here.
set(USE_LDOPT)
# Enable this if you want link time optimizations (LTO)
set(USE_LTO no)
# If enabled, this option allows to compile the application in THUMB mode.
set(USE_THUMB yes)
# Enable this if you want to see the full log while compiling.
set(USE_VERBOSE_COMPILE no)
#
# Build global options
##############################################################################
##############################################################################
# Architecture or project specific options
#
# Enables the use of FPU on Cortex-M4 (no, softfp, hard).
set(USE_FPU no)
#
# Architecture or project specific options
##############################################################################
##############################################################################
# Project, sources and paths
#
# Define linker script file here
set(LDSCRIPT ${CMAKE_CURRENT_SOURCE_DIR}/m4.ld)
# C sources that can be compiled in ARM or THUMB mode depending on the global
# setting.
set(CSRC
bootstrap.c
)
# C++ sources that can be compiled in ARM or THUMB mode depending on the global
# setting.
set(CPPSRC)
# C sources to be compiled in ARM mode regardless of the global setting.
# NOTE: Mixing ARM and THUMB mode enables the -mthumb-interwork compiler
# option that results in lower performance and larger code size.
set(ACSRC)
# C++ sources to be compiled in ARM mode regardless of the global setting.
# NOTE: Mixing ARM and THUMB mode enables the -mthumb-interwork compiler
# option that results in lower performance and larger code size.
set(ACPPSRC)
# C sources to be compiled in THUMB mode regardless of the global setting.
# NOTE: Mixing ARM and THUMB mode enables the -mthumb-interwork compiler
# option that results in lower performance and larger code size.
set(TCSRC)
# C sources to be compiled in THUMB mode regardless of the global setting.
# NOTE: Mixing ARM and THUMB mode enables the -mthumb-interwork compiler
# option that results in lower performance and larger code size.
set(TCPPSRC)
# List ASM source files here
set(ASMSRC startup_ARMCM4.S)
set(INCDIR
${CHIBIOS}/os/ports/common/ARMCMx/CMSIS/include
${CHIBIOS}/os/ports/common/ARMCMx
${CHIBIOS_PORTAPACK}/os/hal/platforms/LPC43xx
${CHIBIOS_PORTAPACK}/os/hal/platforms/LPC43xx_M4
)
#
# Project, sources and paths
##############################################################################
##############################################################################
# Compiler settings
#
set(MCU cortex-m4)
# ARM-specific options here
set(AOPT)
# THUMB-specific options here
set(TOPT "-mthumb -DTHUMB")
# Define C warning options here
set(CWARN "-Wall -Wextra -Wstrict-prototypes")
# Define C++ warning options here
set(CPPWARN "-Wall -Wextra")
#
# Compiler settings
##############################################################################
##############################################################################
# Start of default section
#
# List all default C defines here, like -D_DEBUG=1
# TODO: Switch -DCRT0_INIT_DATA depending on load from RAM or SPIFI?
# NOTE: _RANDOM_TCC to kill a GCC 4.9.3 error with std::max argument types
set(DDEFS -DLPC43XX -DLPC43XX_M4 -D__START=main -DGIT_REVISION=\"${GIT_REVISION}\")
# List all default ASM defines here, like -D_DEBUG=1
set(DADEFS)
# List all default directories to look for include files here
set(DINCDIR)
# List the default directory to look for the libraries here
set(DLIBDIR)
# List all default libraries here
set(DLIBS)
#
# End of default section
##############################################################################
##############################################################################
# Start of user section
#
# List all user C define here, like -D_DEBUG=1
set(UDEFS)
# Define ASM defines here
set(UADEFS)
# List all user directories here
set(UINCDIR)
# List the user directory to look for the libraries here
set(ULIBDIR)
# List all user libraries here
set(ULIBS)
#
# End of user defines
##############################################################################
set(RULESPATH ${CHIBIOS}/os/ports/GCC/ARMCMx)
include(${RULESPATH}/rules.cmake)
##############################################################################
add_executable(${PROJECT_NAME}.elf ${CSRC} ${CPPSRC} ${ASMSRC})
set_target_properties(${PROJECT_NAME}.elf PROPERTIES LINK_DEPENDS ${LDSCRIPT})
add_definitions(${DEFS})
include_directories(. ${INCDIR})
link_directories(${LLIBDIR})
target_link_libraries(${PROJECT_NAME}.elf ${LIBS})
add_custom_command(
OUTPUT ${PROJECT_NAME}.bin
COMMAND ${CMAKE_OBJCOPY} -O binary ${PROJECT_NAME}.elf ${PROJECT_NAME}.bin
DEPENDS ${PROJECT_NAME}.elf
)
add_custom_target(
bootstrap
DEPENDS ${PROJECT_NAME}.bin
)

BIN
firmware/bootstrap/bootstrap.bin
View File

Binary file not shown.

109
firmware/bootstrap/bootstrap.c
View File

@ -1,109 +0,0 @@
/*
* Copyright (C) 2015 Jared Boone, ShareBrained Technology, Inc.
*
* This file is part of PortaPack.
*
* This program is free software; you can redistribute it and/or modify
* it under the terms of the GNU General Public License as published by
* the Free Software Foundation; either version 2, or (at your option)
* any later version.
*
* This program is distributed in the hope that it will be useful,
* but WITHOUT ANY WARRANTY; without even the implied warranty of
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
* GNU General Public License for more details.
*
* You should have received a copy of the GNU General Public License
* along with this program; see the file COPYING. If not, write to
* the Free Software Foundation, Inc., 51 Franklin Street,
* Boston, MA 02110-1301, USA.
*/
#include <lpc43xx_m4.h>
#include <nvic.h>
/* Bootstrap runs from SPIFI on the M4, immediately after the LPC43xx built-in
* boot ROM runs.
*/
/* After boot ROM executes:
* PLL1 is at 288MHz (IRC * 24)
* IDIVB_CTRL = PLL1 / 9 = 32MHz
* IDIVC_CTRL = PLL1 / 3 = 96MHz
* BASE_SPIFI_CLK.CLK_SEL = IDIVB
*/
/* SPIFI config must run from RAM because SPIFI memory mode may/must be
* re-initialized during the transition
*/
/* An ARM veneer will be created to make the long jump between code in the
* SPIFI address range and the RAM address range.
*/
__attribute__ ((section("fast")))
void configure_spifi(void) {
/* Configure pins first, to enable SCK input buffer for feedback */
/* Configure SPIFI pins for maximum I/O rate */
const uint32_t scu_spifi_io =
(3 << 0) /* Function 3 */
| (0 << 3) /* Disable pull-down */
| (1 << 4) /* Disable pull-up */
| (1 << 5) /* Fast slew rate */
| (1 << 6) /* Enable input buffer */
| (1 << 7) /* Disable input glitch filter */
;
LPC_SCU->SFSP3_3 = scu_spifi_io;
LPC_SCU->SFSP3_4 = scu_spifi_io;
LPC_SCU->SFSP3_5 = scu_spifi_io;
LPC_SCU->SFSP3_6 = scu_spifi_io;
LPC_SCU->SFSP3_7 = scu_spifi_io;
LPC_SCU->SFSP3_8 = scu_spifi_io;
/* Tweak SPIFI mode */
LPC_SPIFI->CTRL =
(0xffff << 0) /* Timeout */
| (0x1 << 16) /* CS high time in "clocks - 1" */
| (0 << 21) /* 0: Attempt speculative prefetch on data accesses */
| (0 << 22) /* 0: No interrupt on command ended */
| (0 << 23) /* 0: SCK driven low after rising edge at which last bit of command is captured. Stays low while CS# is high. */
| (0 << 27) /* 0: Cache prefetching enabled */
| (0 << 28) /* 0: Quad protocol, IO3:0 */
| (1 << 29) /* 1: Read data sampled on falling edge of clock */
| (1 << 30) /* 1: Read data is sampled using feedback clock from SCK pin */
| (0 << 31) /* 0: DMA request disabled */
;
/* Throttle up the SPIFI interface to 96MHz (PLL1 / 3) */
LPC_CGU->IDIVB_CTRL =
(0 << 0) /* PD */
| (1 << 2) /* IDIV (/2) */
| (1 << 11) /* AUTOBLOCK */
| (9 << 24) /* PLL1 */
;
}
int main(void) {
#if 0
/* Configure LEDs and make sure they're off to start */
LPC_SCU->SFSP4_1 = (1 << 4) | 0; /* GPIO2[1] */
LPC_SCU->SFSP4_2 = (1 << 4) | 0; /* GPIO2[2] */
LPC_SCU->SFSP6_12 = (1 << 4) | 0; /* GPIO2[8] */
LPC_GPIO->CLR[2] = (1 << 8) | (1 << 2) | (1 << 1);
LPC_GPIO->DIR[2] = (1 << 8) | (1 << 2) | (1 << 1);
/* Indicate M4 is working */
LPC_GPIO->SET[2] = (1 << 2);
#endif
configure_spifi();
LPC_CREG->M0APPMEMMAP = LPC_SPIFI_DATA_CACHED_BASE + 0x80000;
LPC_RGU->RESET_CTRL[1] = 0;
while(1) {
__WFE();
}
}
void SystemInit(void) {
}

BIN
firmware/bootstrap/bootstrap_pad.bin
View File

Binary file not shown.

194
firmware/bootstrap/m4.ld
View File

@ -1,194 +0,0 @@
/* Linker script to configure memory regions.
* Need modifying for a specific board.
* FLASH.ORIGIN: starting address of flash
* FLASH.LENGTH: length of flash
* RAM.ORIGIN: starting address of RAM bank 0
* RAM.LENGTH: length of RAM bank 0
*/
MEMORY
{
FLASH (rx ) : ORIGIN = 0x00000000, LENGTH = 32k
RAM (rwx) : ORIGIN = 0x10000000, LENGTH = 96k
}
/* Linker script to place sections and symbol values. Should be used together
* with other linker script that defines memory regions FLASH and RAM.
* It references following symbols, which must be defined in code:
* Reset_Handler : Entry of reset handler
*
* It defines following symbols, which code can use without definition:
* __exidx_start
* __exidx_end
* __copy_table_start__
* __copy_table_end__
* __zero_table_start__
* __zero_table_end__
* __etext
* __data_start__
* __preinit_array_start
* __preinit_array_end
* __init_array_start
* __init_array_end
* __fini_array_start
* __fini_array_end
* __data_end__
* __bss_start__
* __bss_end__
* __end__
* end
* __HeapLimit
* __StackLimit
* __StackTop
* __stack
*/
ENTRY(Reset_Handler)
SECTIONS
{
.text :
{
KEEP(*(.isr_vector))
*(.text*)
KEEP(*(.init))
KEEP(*(.fini))
/* .ctors */
*crtbegin.o(.ctors)
*crtbegin?.o(.ctors)
*(EXCLUDE_FILE(*crtend?.o *crtend.o) .ctors)
*(SORT(.ctors.*))
*(.ctors)
/* .dtors */
*crtbegin.o(.dtors)
*crtbegin?.o(.dtors)
*(EXCLUDE_FILE(*crtend?.o *crtend.o) .dtors)
*(SORT(.dtors.*))
*(.dtors)
*(.rodata*)
KEEP(*(.eh_frame*))
} > FLASH
.ARM.extab :
{
*(.ARM.extab* .gnu.linkonce.armextab.*)
} > FLASH
__exidx_start = .;
.ARM.exidx :
{
*(.ARM.exidx* .gnu.linkonce.armexidx.*)
} > FLASH
__exidx_end = .;
/* To copy multiple ROM to RAM sections,
* uncomment .copy.table section and,
* define __STARTUP_COPY_MULTIPLE in startup_ARMCMx.S */
/*
.copy.table :
{
. = ALIGN(4);
__copy_table_start__ = .;
LONG (__etext)
LONG (__data_start__)
LONG (__data_end__ - __data_start__)
LONG (__etext2)
LONG (__data2_start__)
LONG (__data2_end__ - __data2_start__)
__copy_table_end__ = .;
} > FLASH
*/
/* To clear multiple BSS sections,
* uncomment .zero.table section and,
* define __STARTUP_CLEAR_BSS_MULTIPLE in startup_ARMCMx.S */
/*
.zero.table :
{
. = ALIGN(4);
__zero_table_start__ = .;
LONG (__bss_start__)
LONG (__bss_end__ - __bss_start__)
LONG (__bss2_start__)
LONG (__bss2_end__ - __bss2_start__)
__zero_table_end__ = .;
} > FLASH
*/
__etext = .;
.data : AT (__etext)
{
__data_start__ = .;
/* Text/code sections that need to be located in RAM */
*(fast)
*(vtable)
*(.data*)
. = ALIGN(4);
/* preinit data */
PROVIDE_HIDDEN (__preinit_array_start = .);
KEEP(*(.preinit_array))
PROVIDE_HIDDEN (__preinit_array_end = .);
. = ALIGN(4);
/* init data */
PROVIDE_HIDDEN (__init_array_start = .);
KEEP(*(SORT(.init_array.*)))
KEEP(*(.init_array))
PROVIDE_HIDDEN (__init_array_end = .);
. = ALIGN(4);
/* finit data */
PROVIDE_HIDDEN (__fini_array_start = .);
KEEP(*(SORT(.fini_array.*)))
KEEP(*(.fini_array))
PROVIDE_HIDDEN (__fini_array_end = .);
KEEP(*(.jcr*))
. = ALIGN(4);
/* All data end */
__data_end__ = .;
} > RAM
.bss :
{
. = ALIGN(4);
__bss_start__ = .;
*(.bss*)
*(COMMON)
. = ALIGN(4);
__bss_end__ = .;
} > RAM
.heap (COPY):
{
__end__ = .;
PROVIDE(end = .);
*(.heap*)
__HeapLimit = .;
} > RAM
/* .stack_dummy section doesn't contains any symbols. It is only
* used for linker to calculate size of stack sections, and assign
* values to stack symbols later */
.stack_dummy (COPY):
{
*(.stack*)
} > RAM
/* Set stack top to end of RAM, and stack limit move down by
* size of stack_dummy section */
__StackTop = ORIGIN(RAM) + LENGTH(RAM);
__StackLimit = __StackTop - SIZEOF(.stack_dummy);
PROVIDE(__stack = __StackTop);
/* Check if data + heap + stack exceeds RAM limit */
ASSERT(__StackLimit >= __HeapLimit, "region RAM overflowed with stack")
}

257
firmware/bootstrap/startup_ARMCM4.S
View File

@ -1,257 +0,0 @@
/* File: startup_ARMCM4.S
* Purpose: startup file for Cortex-M4 devices. Should use with
* GCC for ARM Embedded Processors
* Version: V2.0
* Date: 16 August 2013
*
/* Copyright (c) 2011 - 2013 ARM LIMITED
All rights reserved.
Redistribution and use in source and binary forms, with or without
modification, are permitted provided that the following conditions are met:
- Redistributions of source code must retain the above copyright
notice, this list of conditions and the following disclaimer.
- Redistributions in binary form must reproduce the above copyright
notice, this list of conditions and the following disclaimer in the
documentation and/or other materials provided with the distribution.
- Neither the name of ARM nor the names of its contributors may be used
to endorse or promote products derived from this software without
specific prior written permission.
*
THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS"
AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE
ARE DISCLAIMED. IN NO EVENT SHALL COPYRIGHT HOLDERS AND CONTRIBUTORS BE
LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR
CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF
SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS
INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN
CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE)
ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE
POSSIBILITY OF SUCH DAMAGE.
---------------------------------------------------------------------------*/
.syntax unified
.arch armv7e-m
.section .stack
.align 3
#ifdef __STACK_SIZE
.equ Stack_Size, __STACK_SIZE
#else
.equ Stack_Size, 0xc00
#endif
.globl __StackTop
.globl __StackLimit
__StackLimit:
.space Stack_Size
.size __StackLimit, . - __StackLimit
__StackTop:
.size __StackTop, . - __StackTop
.section .heap
.align 3
#ifdef __HEAP_SIZE
.equ Heap_Size, __HEAP_SIZE
#else
.equ Heap_Size, 0
#endif
.globl __HeapBase
.globl __HeapLimit
__HeapBase:
.if Heap_Size
.space Heap_Size
.endif
.size __HeapBase, . - __HeapBase
__HeapLimit:
.size __HeapLimit, . - __HeapLimit
.section .isr_vector
.align 2
.globl __isr_vector
__isr_vector:
.long __StackTop /* Top of Stack */
.long Reset_Handler /* Reset Handler */
.long NMI_Handler /* NMI Handler */
.long HardFault_Handler /* Hard Fault Handler */
.long MemManage_Handler /* MPU Fault Handler */
.long BusFault_Handler /* Bus Fault Handler */
.long UsageFault_Handler /* Usage Fault Handler */
.long 0 /* Reserved */
.long 0 /* Reserved */
.long 0 /* Reserved */
.long 0 /* Reserved */
.long SVC_Handler /* SVCall Handler */
.long DebugMon_Handler /* Debug Monitor Handler */
.long 0 /* Reserved */
.long PendSV_Handler /* PendSV Handler */
.long SysTick_Handler /* SysTick Handler */
/* External interrupts */
.long Default_Handler
.size __isr_vector, . - __isr_vector
.text
.thumb
.thumb_func
.align 2
.globl Reset_Handler
.type Reset_Handler, %function
Reset_Handler:
/* Firstly it copies data from read only memory to RAM. There are two schemes
* to copy. One can copy more than one sections. Another can only copy
* one section. The former scheme needs more instructions and read-only
* data to implement than the latter.
* Macro __STARTUP_COPY_MULTIPLE is used to choose between two schemes. */
#ifdef __STARTUP_COPY_MULTIPLE
/* Multiple sections scheme.
*
* Between symbol address __copy_table_start__ and __copy_table_end__,
* there are array of triplets, each of which specify:
* offset 0: LMA of start of a section to copy from
* offset 4: VMA of start of a section to copy to
* offset 8: size of the section to copy. Must be multiply of 4
*
* All addresses must be aligned to 4 bytes boundary.
*/
ldr r4, =__copy_table_start__
ldr r5, =__copy_table_end__
.L_loop0:
cmp r4, r5
bge .L_loop0_done
ldr r1, [r4]
ldr r2, [r4, #4]
ldr r3, [r4, #8]
.L_loop0_0:
subs r3, #4
ittt ge
ldrge r0, [r1, r3]
strge r0, [r2, r3]
bge .L_loop0_0
adds r4, #12
b .L_loop0
.L_loop0_done:
#else
/* Single section scheme.
*
* The ranges of copy from/to are specified by following symbols
* __etext: LMA of start of the section to copy from. Usually end of text
* __data_start__: VMA of start of the section to copy to
* __data_end__: VMA of end of the section to copy to
*
* All addresses must be aligned to 4 bytes boundary.
*/
ldr r1, =__etext
ldr r2, =__data_start__
ldr r3, =__data_end__
.L_loop1:
cmp r2, r3
ittt lt
ldrlt r0, [r1], #4
strlt r0, [r2], #4
blt .L_loop1
#endif /*__STARTUP_COPY_MULTIPLE */
/* This part of work usually is done in C library startup code. Otherwise,
* define this macro to enable it in this startup.
*
* There are two schemes too. One can clear multiple BSS sections. Another
* can only clear one section. The former is more size expensive than the
* latter.
*
* Define macro __STARTUP_CLEAR_BSS_MULTIPLE to choose the former.
* Otherwise efine macro __STARTUP_CLEAR_BSS to choose the later.
*/
#ifdef __STARTUP_CLEAR_BSS_MULTIPLE
/* Multiple sections scheme.
*
* Between symbol address __copy_table_start__ and __copy_table_end__,
* there are array of tuples specifying:
* offset 0: Start of a BSS section
* offset 4: Size of this BSS section. Must be multiply of 4
*/
ldr r3, =__zero_table_start__
ldr r4, =__zero_table_end__
.L_loop2:
cmp r3, r4
bge .L_loop2_done
ldr r1, [r3]
ldr r2, [r3, #4]
movs r0, 0
.L_loop2_0:
subs r2, #4
itt ge
strge r0, [r1, r2]
bge .L_loop2_0
adds r3, #8
b .L_loop2
.L_loop2_done:
#elif defined (__STARTUP_CLEAR_BSS)
/* Single BSS section scheme.
*
* The BSS section is specified by following symbols
* __bss_start__: start of the BSS section.
* __bss_end__: end of the BSS section.
*
* Both addresses must be aligned to 4 bytes boundary.
*/
ldr r1, =__bss_start__
ldr r2, =__bss_end__
movs r0, 0
.L_loop3:
cmp r1, r2
itt lt
strlt r0, [r1], #4
blt .L_loop3
#endif /* __STARTUP_CLEAR_BSS_MULTIPLE || __STARTUP_CLEAR_BSS */
#ifndef __NO_SYSTEM_INIT
bl SystemInit
#endif
#ifndef __START
#define __START _start
#endif
bl __START
.pool
.size Reset_Handler, . - Reset_Handler
.align 1
.thumb_func
.weak Default_Handler
.type Default_Handler, %function
Default_Handler:
b .
.size Default_Handler, . - Default_Handler
/* Macro to define default handlers. Default handler
* will be weak symbol and just dead loops. They can be
* overwritten by other handlers */
.macro def_irq_handler handler_name
.weak \handler_name
.set \handler_name, Default_Handler
.endm
def_irq_handler NMI_Handler
def_irq_handler HardFault_Handler
def_irq_handler MemManage_Handler
def_irq_handler BusFault_Handler
def_irq_handler UsageFault_Handler
def_irq_handler SVC_Handler
def_irq_handler DebugMon_Handler
def_irq_handler PendSV_Handler
def_irq_handler SysTick_Handler
def_irq_handler DEF_IRQHandler
.end

293
firmware/chibios-portapack/boards/GSG_HACKRF_ONE/board.c
View File

@ -24,20 +24,293 @@
* @details Digital I/O ports static configuration as defined in @p board.h.
* This variable is used by the HAL when initializing the PAL driver.
*/
/**
* CoolRunner (HackRF) CPLD:
* CoolRunner-II devices have internal pull-ups on TDI, TMS, and TCK.
* It is not necessary to externally terminate JTAG pins with internal termination; they can be
* left floating. External pull-ups on pins with internal termination is allowed, but not
* necessary. External pull-down termination is not recommended as it would conflict with
* the internal pull-ups
*
* LPC43xx pull-ups come on line when 3V3 supply voltage reaches about 2V.
*
* 3V3 supply:
* Ramps up in about 1ms.
*
* 1V8 supply:
* Ramps up in about 1ms.
* EN1V8 has a 10K pull-down on the HackRF and is pulled up (very gently) by the LPC43xx
* bootloader at boot time. So until the EN1V8 pin is reconfigured as an output, the enable
* pin on the 1V8 supply sits at about 0.55V, which feels untidy...
* 1V8 supply is activated when GPIO is driven high by user code.
*/
const PALConfig pal_default_config = {
.P = {
{ .data = 0, .dir = 0 },
{ .data = 0, .dir = 0 },
{
.data = 0,
.dir = (1 << 8) | (1 << 2) | (1 << 1)
{ // GPIO0
.data
= (1 << 15) // CS_XCVR
| (1 << 14) // AMP_BYPASS
| (0 << 9) // 10K PD, BOOT1
| (1 << 8) // 10K PU, BOOT0
,
.dir
= (1 << 15) // CS_XCVR
| (1 << 14) // AMP_BYPASS
| (0 << 9) // 10K PD, BOOT1
| (0 << 8) // 10K PU, BOOT0
},
{ // GPIO1
.data
= (1 << 13) // PortaPack P2_13/DIR
| (1 << 12) // !RX_AMP_PWR
| (0 << 11) // RX_AMP
| (1 << 10) // 10K PD, BOOT3, PortaPack P2_9/LCD_WRX
| (1 << 8) // PortaPack CPLD.TDO(O)
| (1 << 1) // PortaPack CPLD.TMS(I)
| (0 << 0) // !MIX_BYPASS
,
.dir
= (1 << 13) // PortaPack P2_13/DIR
| (1 << 12) // !RX_AMP_PWR
| (1 << 11) // RX_AMP
| (1 << 10) // 10K PD, BOOT3, PortaPack P2_9/LCD_WRX
| (0 << 8) // PortaPack CPLD.TDO(O) (input with pull up)
| (0 << 1) // PortaPack CPLD.TMS(I) (output only when needed, pull up internal to CPLD)
| (1 << 0) // !MIX_BYPASS
},
{ // GPIO2
.data
= (0 << 15) // TX_AMP
| (0 << 11) // TX_MIX_BP
| (1 << 14) // MIXER_RESETX, 10K PU
| (1 << 13) // MIXER_ENX, 10K PU
| (1 << 12) // RX_MIX_BP
| (0 << 10) // LP
| (1 << 9) // !VAA_ENABLE
| (0 << 8) // LED3 (TX)
| (1 << 7) // CS_AD
| (0 << 6) // XCVR_EN, 10K PD
| (0 << 5) // RXENABLE
| (0 << 4) // TXENABLE
| (0 << 2) // LED2 (RX)
| (0 << 1) // LED1 (USB)
| (1 << 0) // HP
,
.dir
= (1 << 15) // TX_AMP
| (1 << 14) // MIXER_RESETX, 10K PU
| (1 << 13) // MIXER_ENX, 10K PU
| (1 << 12) // RX_MIX_BP
| (1 << 11) // TX_MIX_BP
| (1 << 10) // LP
| (1 << 9) // !VAA_ENABLE
| (1 << 8) // LED3 (TX)
| (1 << 7) // CS_AD
| (1 << 6) // XCVR_EN, 10K PD
| (1 << 5) // RXENABLE
| (1 << 4) // TXENABLE
| (1 << 2) // LED2 (RX)
| (1 << 1) // LED1 (USB)
| (1 << 0) // HP
},
{ // GPIO3
.data
= (0 << 15) // PortaPack GPIO3_15(IO)
| (0 << 14) // PortaPack GPIO3_14(IO)
| (0 << 13) // PortaPack GPIO3_13(IO)
| (0 << 12) // PortaPack GPIO3_12(IO)
| (0 << 11) // PortaPack GPIO3_11(IO)
| (0 << 10) // PortaPack GPIO3_10(IO)
| (0 << 9) // PortaPack GPIO3_9(IO)
| (0 << 8) // PortaPack GPIO3_8(IO)
| (0 << 7) // VREGMODE
| (1 << 6) // EN1V8, 10K PD
| (1 << 5) // !TX_AMP_PWR, 10K PU
| (1 << 4) // HackRF CPLD.TMS(I) (output only when needed, pull-up internal to CPLD when 1V8 present)
| (1 << 1) // HackRF CPLD.TDI(I), PortaPack I2S0_RX_SDA(O), PortaPack CPLD.TDI(I) (output only when needed, pull-up internal to CPLD when 1V8 present)
| (1 << 0) // HackRF CPLD.TCK(I), PortaPack CPLD.TCK(I) (output only when needed, pull-up internal to CPLD when 1V8 present)
,
.dir
= (0 << 15) // PortaPack GPIO3_15(IO)
| (0 << 14) // PortaPack GPIO3_14(IO)
| (0 << 13) // PortaPack GPIO3_13(IO)
| (0 << 12) // PortaPack GPIO3_12(IO)
| (0 << 11) // PortaPack GPIO3_11(IO)
| (0 << 10) // PortaPack GPIO3_10(IO)
| (0 << 9) // PortaPack GPIO3_9(IO)
| (0 << 8) // PortaPack GPIO3_8(IO)
| (1 << 7) // VREGMODE
| (1 << 6) // EN1V8, 10K PD
| (1 << 5) // !TX_AMP_PWR, 10K PU
| (0 << 4) // HackRF CPLD.TMS(I) (output only when needed, pull-up internal to CPLD when 1V8 present)
| (0 << 1) // HackRF CPLD.TDI(I), PortaPack I2S0_RX_SDA(O), PortaPack CPLD.TDI(I) (output only when needed, pull-up internal to CPLD when 1V8 present)
| (0 << 0) // HackRF CPLD.TCK(I), PortaPack CPLD.TCK(I) (output only when needed, pull-up internal to CPLD when 1V8 present)
},
{ // GPIO4
.data = 0,
.dir = 0
},
{ // GPIO5
.data
= (1 << 18) // HackRF CPLD.TDO(O) (input with pull up)
| (0 << 15) // TX
| (1 << 16) // MIX_BYPASS
| (1 << 5) // RX
| (1 << 4) // PortaPack P2_4/LCD_RDX
| (0 << 3) // PortaPack P2_3/LCD_TE
| (0 << 1) // PortaPack P2_1/ADDR
| (1 << 0) // PortaPack P2_0/IO_STBX
,
.dir
= (0 << 18) // HackRF CPLD.TDO(O) (input with pull up)
| (1 << 16) // MIX_BYPASS
| (1 << 15) // TX
| (1 << 5) // RX
| (1 << 4) // PortaPack P2_4/LCD_RDX
| (0 << 3) // PortaPack P2_3/LCD_TE
| (1 << 1) // PortaPack P2_1/ADDR
| (1 << 0) // PortaPack P2_0/IO_STBX
},
{ // GPIO6
.data = 0,
.dir = 0
},
{ // GPIO7
.data = 0,
.dir = 0
},
{ .data = 0, .dir = 0 },
{ .data = 0, .dir = 0 },
{ .data = 0, .dir = 0 },
{ .data = 0, .dir = 0 },
{ .data = 0, .dir = 0 },
},
.SCU = {
/* Configure GP_CLKIN as soon as possible. It's an output at boot time, and the Si5351C doesn't
* reset when the reset button is pressed, so it could still be output enabled.
*/
{ 4, 7, .config={ .MODE=1, .EPD=0, .EPUN=1, .EHS=0, .EZI=1, .ZIF=1 } }, /* GP_CLKIN/P72/MCU_CLK: SI5351C.CLK7(O) */
/* HackRF: LEDs. Configured early so we can use them to indicate boot status. */
{ 4, 1, .config={ .MODE=0, .EPD=0, .EPUN=1, .EHS=0, .EZI=0, .ZIF=0 } }, /* LED1: LED1.A(I) */
{ 4, 2, .config={ .MODE=0, .EPD=0, .EPUN=1, .EHS=0, .EZI=0, .ZIF=0 } }, /* LED2: LED2.A(I) */
{ 6, 12, .config={ .MODE=0, .EPD=0, .EPUN=1, .EHS=0, .EZI=0, .ZIF=0 } }, /* LED3: LED3.A(I) */
/* Power control */
{ 5, 0, .config={ .MODE=0, .EPD=0, .EPUN=1, .EHS=0, .EZI=0, .ZIF=0 } }, /* !VAA_ENABLE: 10K PU, Q3.G(I), power to VAA */
{ 6, 10, .config={ .MODE=0, .EPD=0, .EPUN=1, .EHS=0, .EZI=0, .ZIF=0 } }, /* EN1V8/P70: 10K PD, TPS62410.EN2(I), 1V8LED.A(I) */
{ 6, 11, .config={ .MODE=0, .EPD=0, .EPUN=1, .EHS=0, .EZI=0, .ZIF=0 } }, /* VREGMODE/P69: TPS62410.MODE/DATA(I) */
/* HackRF: I2C0 */
/* Glitch filter operates at 3ns instead of 50ns due to the WM8731
* returning an ACK very fast (170ns) and confusing the I2C state
* machine into thinking there was a bus error. It looks like the
* MCU sees SDA fall before SCL falls, indicating a START at the
* point an ACK is expected. With the glitch filter off or set to
* 3ns, it's probably still a bit tight timing-wise, but improves
* reliability on some problem units.
*/
{ 25, 1,
.config = {
.word = // SFSI2C0
(1U << 0) // SCL: 3ns glitch
| (0U << 2) // SCL: Standard/Fast mode
| (1U << 3) // SCL: Input enabled
| (0U << 7) // SCL: Enable input glitch filter
| (1U << 8) // SDA: 3ns glitch
| (0U << 10) // SDA: Standard/Fast mode
| (1U << 11) // SDA: Input enabled
| (0U << 15) // SDA: Enable input glitch filter
}
},
/* Radio section control */
{ 1, 3, .config={ .MODE=5, .EPD=0, .EPUN=1, .EHS=0, .EZI=1, .ZIF=0 } }, /* SSP1_MISO/P41: MAX2837.DOUT(O) */
{ 1, 4, .config={ .MODE=5, .EPD=1, .EPUN=1, .EHS=0, .EZI=0, .ZIF=0 } }, /* SSP1_MOSI/P40: MAX2837.DIN(I), MAX5864.DIN(I) */
{ 1, 7, .config={ .MODE=0, .EPD=0, .EPUN=1, .EHS=0, .EZI=0, .ZIF=0 } }, /* !MIX_BYPASS/P35: U1.VCTL1(I), U11.VCTL2(I), U9.V2(I) */
{ 1, 19, .config={ .MODE=1, .EPD=0, .EPUN=1, .EHS=0, .EZI=0, .ZIF=0 } }, /* SSP1_SCK/P39: MAX2837.SCLK(I), MAX5864.SCLK(I) */
{ 1, 20, .config={ .MODE=0, .EPD=0, .EPUN=1, .EHS=0, .EZI=0, .ZIF=0 } }, /* CS_XCVR/P53: MAX2837.CS(I) */
{ 2, 5, .config={ .MODE=4, .EPD=0, .EPUN=0, .EHS=0, .EZI=0, .ZIF=0 } }, /* RX/P43: U7.VCTL1(I), U10.VCTL1(I), U2.VCTL1(I) */
{ 2, 6, .config={ .MODE=4, .EPD=0, .EPUN=1, .EHS=0, .EZI=0, .ZIF=0 } }, /* MIXER_SCLK/P31: 33pF, RFFC5072.SCLK(I) */
{ 2, 10, .config={ .MODE=0, .EPD=0, .EPUN=1, .EHS=0, .EZI=0, .ZIF=0 } }, /* AMP_BYPASS/P50: U14.V2(I), U12.V2(I) */
{ 2, 11, .config={ .MODE=0, .EPD=0, .EPUN=1, .EHS=0, .EZI=0, .ZIF=0 } }, /* RX_AMP/P49: U12.V1(I), U14.V3(I) */
{ 2, 12, .config={ .MODE=0, .EPD=0, .EPUN=1, .EHS=0, .EZI=0, .ZIF=0 } }, /* !RX_AMP_PWR/P52: 10K PU, Q1.G(I), power to U13 (RX amp) */
{ 4, 0, .config={ .MODE=0, .EPD=0, .EPUN=1, .EHS=0, .EZI=0, .ZIF=0 } }, /* HP/P44: U6.VCTL1(I), U5.VCTL2(I) */
{ 4, 4, .config={ .MODE=0, .EPD=0, .EPUN=1, .EHS=0, .EZI=0, .ZIF=0 } }, /* TXENABLE/P55: MAX2837.TXENABLE(I) */
{ 4, 5, .config={ .MODE=0, .EPD=0, .EPUN=1, .EHS=0, .EZI=0, .ZIF=0 } }, /* RXENABLE/P56: MAX2837.RXENABLE(I) */
{ 4, 6, .config={ .MODE=0, .EPD=0, .EPUN=1, .EHS=0, .EZI=0, .ZIF=0 } }, /* XCVR_EN: 10K PD, MAX2837.ENABLE(I) */
{ 5, 1, .config={ .MODE=0, .EPD=0, .EPUN=1, .EHS=0, .EZI=0, .ZIF=0 } }, /* LP/P45: U6.VCTL2(I), U5.VCTL1(I) */
{ 5, 2, .config={ .MODE=0, .EPD=0, .EPUN=1, .EHS=0, .EZI=0, .ZIF=0 } }, /* TX_MIX_BP/P46: U9.V1(I) */
{ 5, 3, .config={ .MODE=0, .EPD=0, .EPUN=1, .EHS=0, .EZI=0, .ZIF=0 } }, /* RX_MIX_BP/P47: U9.V3(I) */
{ 5, 4, .config={ .MODE=0, .EPD=0, .EPUN=1, .EHS=0, .EZI=0, .ZIF=0 } }, /* MIXER_ENX/P32: 10K PU, 33pF, RFFC5072.ENX(I) */
{ 5, 5, .config={ .MODE=0, .EPD=0, .EPUN=1, .EHS=0, .EZI=0, .ZIF=0 } }, /* MIXER_RESETX/P33: 10K PU, 33pF, RFFC5072.RESETX(I) */
{ 5, 6, .config={ .MODE=0, .EPD=0, .EPUN=1, .EHS=0, .EZI=0, .ZIF=0 } }, /* TX_AMP/P48: U12.V3(I), U14.V1(I) */
{ 5, 7, .config={ .MODE=0, .EPD=0, .EPUN=1, .EHS=0, .EZI=0, .ZIF=0 } }, /* CS_AD/P54: MAX5864.CS(I) */
{ 6, 4, .config={ .MODE=0, .EPD=0, .EPUN=1, .EHS=0, .EZI=1, .ZIF=0 } }, /* MIXER_SDATA/P27: 33pF, RFFC5072.SDATA(IO) */
{ 6, 7, .config={ .MODE=4, .EPD=0, .EPUN=1, .EHS=0, .EZI=0, .ZIF=0 } }, /* TX/P42: U7.VCTL2(I), U10.VCTL2(I), U2.VCTL2(I) */
{ 6, 8, .config={ .MODE=4, .EPD=0, .EPUN=1, .EHS=0, .EZI=0, .ZIF=0 } }, /* MIX_BYPASS/P34: U1.VCTL2(I), U11.VCTL1(I) */
{ 6, 9, .config={ .MODE=0, .EPD=0, .EPUN=1, .EHS=0, .EZI=0, .ZIF=0 } }, /* !TX_AMP_PWR/P51: 10K PU, Q2.G(I), power to U25 (TX amp) */
/* SGPIO for sample transfer interface to HackRF CPLD. */
{ 0, 0, .config={ .MODE=3, .EPD=0, .EPUN=1, .EHS=1, .EZI=1, .ZIF=1 } }, /* SGPIO0/P75/BANK2F3M3: CPLD.89/HOST_DATA0(IO) */
{ 0, 1, .config={ .MODE=3, .EPD=0, .EPUN=1, .EHS=1, .EZI=1, .ZIF=1 } }, /* SGPIO1/BANK2F3M5: CPLD.79/HOST_DATA1(IO) */
{ 1, 15, .config={ .MODE=2, .EPD=0, .EPUN=1, .EHS=1, .EZI=1, .ZIF=1 } }, /* SGPIO2/BANK2F3M9: CPLD.74/HOST_DATA2(IO) */
{ 1, 16, .config={ .MODE=2, .EPD=0, .EPUN=1, .EHS=1, .EZI=1, .ZIF=1 } }, /* SGPIO3/BANK2F3M10: CPLD.72/HOST_DATA3(IO) */
{ 6, 3, .config={ .MODE=2, .EPD=0, .EPUN=1, .EHS=1, .EZI=1, .ZIF=1 } }, /* SGPIO4/BANK2F3M14: CPLD.67/HOST_DATA4(IO) */
{ 6, 6, .config={ .MODE=2, .EPD=0, .EPUN=1, .EHS=1, .EZI=1, .ZIF=1 } }, /* SGPIO5/BANK2F3M15: CPLD.64/HOST_DATA5(IO) */
{ 2, 2, .config={ .MODE=0, .EPD=0, .EPUN=1, .EHS=1, .EZI=1, .ZIF=1 } }, /* SGPIO6/BANK2F3M16: CPLD.61/HOST_DATA6(IO) */
{ 1, 0, .config={ .MODE=6, .EPD=0, .EPUN=1, .EHS=1, .EZI=1, .ZIF=1 } }, /* SGPIO7/P76/BANK2F3M7: CPLD.77/HOST_DATA7(IO) */
{ 9, 6, .config={ .MODE=6, .EPD=0, .EPUN=1, .EHS=0, .EZI=1, .ZIF=1 } }, /* SGPIO8/SGPIO_CLK/P60: SI5351C.CLK2(O) */
{ 4, 3, .config={ .MODE=7, .EPD=0, .EPUN=1, .EHS=0, .EZI=1, .ZIF=1 } }, /* SGPIO9/P77/BANK2F3M1: CPLD.91/HOST_CAPTURE(O) */
{ 1, 14, .config={ .MODE=6, .EPD=0, .EPUN=0, .EHS=1, .EZI=0, .ZIF=0 } }, /* SGPIO10/P78/BANK2F3M8: CPLD.76/HOST_DISABLE(I) */
{ 1, 17, .config={ .MODE=6, .EPD=0, .EPUN=0, .EHS=1, .EZI=0, .ZIF=0 } }, /* SGPIO11/P79/BANK2F3M11: CPLD.71/HOST_DIRECTION(I) */
{ 1, 18, .config={ .MODE=0, .EPD=1, .EPUN=1, .EHS=0, .EZI=0, .ZIF=0 } }, /* SGPIO12/BANK2F3M12: CPLD.70/HOST_INVERT(I) */
{ 4, 8, .config={ .MODE=4, .EPD=0, .EPUN=0, .EHS=0, .EZI=0, .ZIF=0 } }, /* SGPIO13/BANK2F3M2: CPLD.90/HOST_DECIM_SEL0(I) */
{ 4, 9, .config={ .MODE=4, .EPD=0, .EPUN=0, .EHS=0, .EZI=0, .ZIF=0 } }, /* SGPIO14/BANK2F3M4: CPLD.81/HOST_DECIM_SEL1(I) */
{ 4, 10, .config={ .MODE=4, .EPD=0, .EPUN=0, .EHS=0, .EZI=0, .ZIF=0 } }, /* SGPIO15/BANK2F3M6: CPLD.78/HOST_DECIM_SEL2(I) */
/* HackRF: CPLD */
{ 6, 1, .config={ .MODE=0, .EPD=0, .EPUN=1, .EHS=0, .EZI=0, .ZIF=0 } }, /* CPLD_TCK: CPLD.TCK(I), PortaPack CPLD.TCK(I) */
{ 6, 2, .config={ .MODE=0, .EPD=0, .EPUN=1, .EHS=0, .EZI=1, .ZIF=0 } }, /* CPLD_TDI: CPLD.TDI(I), PortaPack I2S0_RX_SDA(O), PortaPack CPLD.TDI(I) */
{ 6, 5, .config={ .MODE=0, .EPD=0, .EPUN=1, .EHS=0, .EZI=0, .ZIF=0 } }, /* CPLD_TMS: CPLD.TMS(I) */
{ 9, 5, .config={ .MODE=4, .EPD=0, .EPUN=1, .EHS=0, .EZI=1, .ZIF=0 } }, /* CPLD_TDO: CPLD.TDO(O) */
/* PortaPack */
{ 1, 5, .config={ .MODE=0, .EPD=0, .EPUN=0, .EHS=0, .EZI=1, .ZIF=0 } }, /* SD_POW: PortaPack CPLD.TDO(O) */
{ 1, 8, .config={ .MODE=0, .EPD=0, .EPUN=0, .EHS=0, .EZI=0, .ZIF=0 } }, /* SD_VOLT0: PortaPack CPLD.TMS(I) */
{ 2, 0, .config={ .MODE=4, .EPD=0, .EPUN=1, .EHS=0, .EZI=1, .ZIF=0 } }, /* U0_TXD: PortaPack P2_0/IO_STBX */
{ 2, 1, .config={ .MODE=4, .EPD=0, .EPUN=1, .EHS=0, .EZI=1, .ZIF=0 } }, /* U0_RXD: PortaPack P2_1/ADDR */
{ 2, 3, .config={ .MODE=4, .EPD=0, .EPUN=1, .EHS=0, .EZI=1, .ZIF=0 } }, /* I2C1_SDA: PortaPack P2_3/LCD_TE */
{ 2, 4, .config={ .MODE=4, .EPD=0, .EPUN=1, .EHS=0, .EZI=1, .ZIF=0 } }, /* I2C1_SCL: PortaPack P2_4/LCD_RDX */
{ 2, 8, .config={ .MODE=4, .EPD=0, .EPUN=1, .EHS=0, .EZI=0, .ZIF=0 } }, /* P2_8: 10K PD, BOOT2, DFU switch, PortaPack P2_8/<unused> */
{ 2, 9, .config={ .MODE=0, .EPD=0, .EPUN=1, .EHS=0, .EZI=1, .ZIF=0 } }, /* P2_9: 10K PD, BOOT3, PortaPack P2_9/LCD_WRX */
{ 2, 13, .config={ .MODE=0, .EPD=0, .EPUN=1, .EHS=0, .EZI=1, .ZIF=0 } }, /* P2_13: PortaPack P2_13/DIR */
{ 7, 0, .config={ .MODE=0, .EPD=1, .EPUN=1, .EHS=0, .EZI=1, .ZIF=0 } }, /* GPIO3_8: PortaPack GPIO3_8(IO) */
{ 7, 1, .config={ .MODE=0, .EPD=1, .EPUN=1, .EHS=0, .EZI=1, .ZIF=0 } }, /* GPIO3_9: PortaPack GPIO3_9(IO) */
{ 7, 2, .config={ .MODE=0, .EPD=1, .EPUN=1, .EHS=0, .EZI=1, .ZIF=0 } }, /* GPIO3_10: PortaPack GPIO3_10(IO) */
{ 7, 3, .config={ .MODE=0, .EPD=1, .EPUN=1, .EHS=0, .EZI=1, .ZIF=0 } }, /* GPIO3_11: PortaPack GPIO3_11(IO) */
{ 7, 4, .config={ .MODE=0, .EPD=1, .EPUN=1, .EHS=0, .EZI=1, .ZIF=0 } }, /* GPIO3_12: PortaPack GPIO3_12(IO) */
{ 7, 5, .config={ .MODE=0, .EPD=1, .EPUN=1, .EHS=0, .EZI=1, .ZIF=0 } }, /* GPIO3_13: PortaPack GPIO3_13(IO) */
{ 7, 6, .config={ .MODE=0, .EPD=1, .EPUN=1, .EHS=0, .EZI=1, .ZIF=0 } }, /* GPIO3_14: PortaPack GPIO3_14(IO) */
{ 7, 7, .config={ .MODE=0, .EPD=1, .EPUN=1, .EHS=0, .EZI=1, .ZIF=0 } }, /* GPIO3_15: PortaPack GPIO3_15(IO) */
/* PortaPack: Audio */
{ 3, 0, .config={ .MODE=2, .EPD=0, .EPUN=0, .EHS=0, .EZI=1, .ZIF=0 } }, /* I2S0_TX_SCK: PortaPack I2S0_TX_SCK(I) */
{ 3, 1, .config={ .MODE=0, .EPD=0, .EPUN=0, .EHS=0, .EZI=1, .ZIF=0 } }, /* I2S0_RX_WS: PortaPack I2S0_TX_WS(I). Input enabled to fold back into RX. */
{ 3, 2, .config={ .MODE=0, .EPD=0, .EPUN=0, .EHS=0, .EZI=0, .ZIF=0 } }, /* I2S0_RX_SDA: PortaPack I2S0_TX_SDA(I) */
{ 24, 2, .config={ .MODE=6, .EPD=1, .EPUN=1, .EHS=0, .EZI=0, .ZIF=0 } }, /* I2S0_TX_CLK: PortaPack I2S0_TX_MCLK */
/* PortaPack: SD card socket */
{ 24, 0, .config={ .MODE=4, .EPD=1, .EPUN=1, .EHS=0, .EZI=1, .ZIF=1 } }, /* SD_CLK: PortaPack SD.CLK, enable input buffer for timing feedback? */
{ 1, 6, .config={ .MODE=7, .EPD=0, .EPUN=0, .EHS=0, .EZI=1, .ZIF=1 } }, /* SD_CMD: PortaPack SD.CMD(IO) */
{ 1, 9, .config={ .MODE=7, .EPD=0, .EPUN=0, .EHS=0, .EZI=1, .ZIF=1 } }, /* SD_DAT0: PortaPack SD.DAT0(IO) */
{ 1, 10, .config={ .MODE=7, .EPD=0, .EPUN=0, .EHS=0, .EZI=1, .ZIF=1 } }, /* SD_DAT1: PortaPack SD.DAT1(IO) */
{ 1, 11, .config={ .MODE=7, .EPD=0, .EPUN=0, .EHS=0, .EZI=1, .ZIF=1 } }, /* SD_DAT2: PortaPack SD.DAT2(IO) */
{ 1, 12, .config={ .MODE=7, .EPD=0, .EPUN=0, .EHS=0, .EZI=1, .ZIF=1 } }, /* SD_DAT3: PortaPack SD.DAT3(IO) */
{ 1, 13, .config={ .MODE=7, .EPD=0, .EPUN=0, .EHS=0, .EZI=1, .ZIF=0 } }, /* SD_CD: PortaPack SD.CD(O) */
/* Miscellaneous */
{ 1, 1, .config={ .MODE=0, .EPD=0, .EPUN=1, .EHS=0, .EZI=0, .ZIF=0 } }, /* P1_1/P74: 10K PU, BOOT0 */
{ 1, 2, .config={ .MODE=0, .EPD=0, .EPUN=1, .EHS=0, .EZI=0, .ZIF=0 } }, /* P1_2/P73: 10K PD, BOOT1 */
{ 2, 7, .config={ .MODE=0, .EPD=0, .EPUN=1, .EHS=0, .EZI=0, .ZIF=0 } }, /* ISP: 10K PU, Unused */
{ 6, 0, .config={ .MODE=0, .EPD=0, .EPUN=0, .EHS=0, .EZI=0, .ZIF=0 } }, /* I2S0_RX_MCLK: Unused */
{ 15, 4, .config={ .MODE=7, .EPD=0, .EPUN=0, .EHS=0, .EZI=0, .ZIF=0 } }, /* I2S0_RX_SCK: Unused */
}
};
#endif

54
firmware/chibios-portapack/boards/SHAREBRAINED_PP_H1_TEST/board.c
View File

@ -1,54 +0,0 @@
/*
ChibiOS/RT - Copyright (C) 2006-2013 Giovanni Di Sirio
Copyright (C) 2014 Jared Boone, ShareBrained Technology
Licensed under the Apache License, Version 2.0 (the "License");
you may not use this file except in compliance with the License.
You may obtain a copy of the License at
http://www.apache.org/licenses/LICENSE-2.0
Unless required by applicable law or agreed to in writing, software
distributed under the License is distributed on an "AS IS" BASIS,
WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
See the License for the specific language governing permissions and
limitations under the License.
*/
#include "ch.h"
#include "hal.h"
#if HAL_USE_PAL || defined(__DOXYGEN__)
/**
* @brief PAL setup.
* @details Digital I/O ports static configuration as defined in @p board.h.
* This variable is used by the HAL when initializing the PAL driver.
*/
const PALConfig pal_default_config = {
.P = {
{ .data = 0, .dir = 0 },
{ .data = 0, .dir = 0 },
{ .data = 0, .dir = 0 },
{ .data = 0, .dir = 0 },
{ .data = 0, .dir = 0 },
{ .data = 0, .dir = 0 },
{ .data = 0, .dir = 0 },
{ .data = 0, .dir = 0 },
},
};
#endif
/**
* @brief Early initialization code.
* @details This initialization must be performed just after stack setup
* and before any other initialization.
*/
// void __early_init(void) {
// }
/**
* @brief Board-specific initialization code.
* @todo Add your board-specific code, if any.
*/
void boardInit(void) {
}

41
firmware/chibios-portapack/boards/SHAREBRAINED_PP_H1_TEST/board.h
View File

@ -1,41 +0,0 @@
/*
ChibiOS/RT - Copyright (C) 2006-2013 Giovanni Di Sirio
Copyright (C) 2015 Jared Boone, ShareBrained Technology
Licensed under the Apache License, Version 2.0 (the "License");
you may not use this file except in compliance with the License.
You may obtain a copy of the License at
http://www.apache.org/licenses/LICENSE-2.0
Unless required by applicable law or agreed to in writing, software
distributed under the License is distributed on an "AS IS" BASIS,
WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
See the License for the specific language governing permissions and
limitations under the License.
*/
#ifndef _BOARD_H_
#define _BOARD_H_
/*
* Setup for ShareBrained PortaPack H1 Tester
*/
/*
* Board identifiers.
*/
#define BOARD_SHAREBRAINED_PP_H1_TEST
#define BOARD_NAME "ShareBrained PortaPack H1 Tester"
#if !defined(_FROM_ASM_)
#ifdef __cplusplus
extern "C" {
#endif
void boardInit(void);
#ifdef __cplusplus
}
#endif
#endif /* _FROM_ASM_ */
#endif /* _BOARD_H_ */

5
firmware/chibios-portapack/boards/SHAREBRAINED_PP_H1_TEST/board.mk
View File

@ -1,5 +0,0 @@
# List of all the board related files.
BOARDSRC = ${CHIBIOS_PORTAPACK}/boards/SHAREBRAINED_PP_H1_TEST/board.c
# Required include directories
BOARDINC = ${CHIBIOS_PORTAPACK}/boards/SHAREBRAINED_PP_H1_TEST

57
firmware/chibios-portapack/os/hal/platforms/LPC43xx/adc_lld.c
View File

@ -54,6 +54,24 @@ ADCDriver ADCD1;
/* Driver local variables and types. */
/*===========================================================================*/
#if LPC43XX_ADC_USE_ADC0
static const adc_resources_t adc0_resources = {
.base = { .clk = &LPC_CGU->BASE_APB3_CLK, .stat = &LPC_CCU1->BASE_STAT, .stat_mask = (1U << 0) },
.branch = { .cfg = &LPC_CCU1->CLK_APB3_ADC0_CFG, .stat = &LPC_CCU1->CLK_APB3_ADC0_STAT },
.reset = { .output_index = 40 },
.interrupt = { .irq = ADC0_IRQn, .priority_mask = CORTEX_PRIORITY_MASK(LPC43XX_ADC0_IRQ_PRIORITY) },
};
#endif /* LPC43XX_ADC_USE_ADC0 */
#if LPC43XX_ADC_USE_ADC1
static const adc_resources_t adc1_resources = {
.base = { .clk = &LPC_CGU->BASE_APB3_CLK, .stat = &LPC_CCU1->BASE_STAT, .stat_mask = (1U << 0) },
.branch = { .cfg = &LPC_CCU1->CLK_APB3_ADC1_CFG, .stat = &LPC_CCU1->CLK_APB3_ADC1_STAT },
.reset = { .output_index = 41 },
.interrupt = { .irq = ADC1_IRQn, .priority_mask = CORTEX_PRIORITY_MASK(LPC43XX_ADC1_IRQ_PRIORITY) },
};
#endif /* LPC43XX_ADC_USE_ADC1 */
/*===========================================================================*/
/* Driver local functions. */
/*===========================================================================*/
@ -129,6 +147,7 @@ void adc_lld_init(void) {
adcObjectInit(&ADCD0);
/* TODO: Implement */
ADCD0.adc = LPC_ADC0;
ADCD0.resources = &adc0_resources;
#endif /* LPC43XX_ADC_USE_ADC0 */
#if LPC43XX_ADC_USE_ADC1
@ -136,6 +155,7 @@ void adc_lld_init(void) {
adcObjectInit(&ADCD1);
/* TODO: Implement */
ADCD1.adc = LPC_ADC1;
ADCD1.resources = &adc1_resources;
#endif /* LPC43XX_ADC_USE_ADC1 */
}
@ -150,20 +170,10 @@ void adc_lld_start(ADCDriver *adcp) {
if (adcp->state == ADC_STOP) {
/* Enables the peripheral.*/
#if LPC43XX_ADC_USE_ADC0
if (&ADCD0 == adcp) {
LPC_CCU1->CLK_APB3_ADC0_CFG.RUN = 1;
LPC_CGU->BASE_APB3_CLK.PD = 0;
nvicEnableVector(ADC0_IRQn, CORTEX_PRIORITY_MASK(LPC43XX_ADC0_IRQ_PRIORITY));
}
#endif /* LPC43XX_ADC_USE_ADC0 */
#if LPC43XX_ADC_USE_ADC1
if (&ADCD1 == adcp) {
LPC_CCU1->CLK_APB3_ADC1_CFG.RUN = 1;
LPC_CGU->BASE_APB3_CLK.PD = 0;
nvicEnableVector(ADC1_IRQn, CORTEX_PRIORITY_MASK(LPC43XX_ADC1_IRQ_PRIORITY));
}
#endif /* LPC43XX_ADC_USE_ADC1 */
base_clock_enable(&adcp->resources->base);
branch_clock_enable(&adcp->resources->branch);
peripheral_reset(&adcp->resources->reset);
interrupt_enable(&adcp->resources->interrupt);
/* Configures the peripheral.*/
adcp->adc->CR =
@ -201,21 +211,10 @@ void adc_lld_stop(ADCDriver *adcp) {
;
/* Disables the peripheral.*/
#if LPC43XX_ADC_USE_ADC0
if (&ADCD0 == adcp) {
nvicDisableVector(ADC0_IRQn);
LPC_CCU1->CLK_APB3_ADC0_CFG.AUTO = 1;
LPC_CCU1->CLK_APB3_ADC0_CFG.RUN = 0;
}
#endif /* LPC43XX_ADC_USE_ADC0 */
#if LPC43XX_ADC_USE_ADC1
if (&ADCD1 == adcp) {
nvicDisableVector(ADC1_IRQn);
LPC_CCU1->CLK_APB3_ADC1_CFG.AUTO = 1;
LPC_CCU1->CLK_APB3_ADC1_CFG.RUN = 0;
}
#endif /* LPC43XX_ADC_USE_ADC1 */
interrupt_disable(&adcp->resources->interrupt);
peripheral_reset(&adcp->resources->reset);
branch_clock_disable(&adcp->resources->branch);
base_clock_disable(&adcp->resources->base);
}
}

14
firmware/chibios-portapack/os/hal/platforms/LPC43xx/adc_lld.h
View File

@ -95,6 +95,16 @@
/* Driver data structures and types. */
/*===========================================================================*/
/**
* @brief Structure used for ADC configuration.
*/
typedef struct {
base_clock_regs_t base;
branch_clock_regs_t branch;
peripheral_reset_t reset;
interrupt_config_t interrupt;
} adc_resources_t;
typedef LPC_ADCx_Type* ADC_TypeDef;
/**
@ -235,6 +245,10 @@ struct ADCDriver {
* @brief Pointer to the ADCx registers block.
*/
ADC_TypeDef adc;
/**
* @brief Pointer to the non-peripheral ADC resources.
*/
const adc_resources_t * resources;
};
/*===========================================================================*/

94
firmware/chibios-portapack/os/hal/platforms/LPC43xx/gpt_lld.c
View File

@ -32,6 +32,38 @@
/* Driver local definitions. */
/*===========================================================================*/
#if LPC43XX_GPT_USE_TIMER0
static const timer_resources_t timer0_resources = {
.branch = { .cfg = &LPC_CCU1->CLK_M4_TIMER0_CFG, .stat = &LPC_CCU1->CLK_M4_TIMER0_STAT },
.reset = { .output_index = 32 },
.interrupt = { .irq = TIMER0_IRQn, .priority_mask = CORTEX_PRIORITY_MASK(LPC43XX_GPT_TIMER0_IRQ_PRIORITY) },
};
#endif /* LPC43XX_GPT_USE_TIMER0 */
#if LPC43XX_GPT_USE_TIMER1
static const timer_resources_t timer1_resources = {
.branch = { .cfg = &LPC_CCU1->CLK_M4_TIMER1_CFG, .stat = &LPC_CCU1->CLK_M4_TIMER1_STAT },
.reset = { .output_index = 33 },
.interrupt = { .irq = TIMER1_IRQn, .priority_mask = CORTEX_PRIORITY_MASK(LPC43XX_GPT_TIMER1_IRQ_PRIORITY) },
};
#endif /* LPC43XX_GPT_USE_TIMER1 */
#if LPC43XX_GPT_USE_TIMER2
static const timer_resources_t timer2_resources = {
.branch = { .cfg = &LPC_CCU1->CLK_M4_TIMER2_CFG, .stat = &LPC_CCU1->CLK_M4_TIMER2_STAT },
.reset = { .output_index = 34 },
.interrupt = { .irq = TIMER2_IRQn, .priority_mask = CORTEX_PRIORITY_MASK(LPC43XX_GPT_TIMER2_IRQ_PRIORITY) },
};
#endif /* LPC43XX_GPT_USE_TIMER3 */
#if LPC43XX_GPT_USE_TIMER3
static const timer_resources_t timer3_resources = {
.branch = { .cfg = &LPC_CCU1->CLK_M4_TIMER3_CFG, .stat = &LPC_CCU1->CLK_M4_TIMER3_STAT },
.reset = { .output_index = 35 },
.interrupt = { .irq = TIMER3_IRQn, .priority_mask = CORTEX_PRIORITY_MASK(LPC43XX_GPT_TIMER3_IRQ_PRIORITY) },
};
#endif /* LPC43XX_GPT_USE_TIMER3 */
/*===========================================================================*/
/* Driver exported variables. */
/*===========================================================================*/
@ -158,24 +190,28 @@ void gpt_lld_init(void) {
/* Driver initialization.*/
gptObjectInit(&GPTD1);
GPTD1.tmr = LPC_TIMER0;
GPTD1.resources = &timer0_resources;
#endif /* LPC43XX_GPT_USE_TIMER0 */
#if LPC43XX_GPT_USE_TIMER1
/* Driver initialization.*/
gptObjectInit(&GPTD2);
GPTD2.tmr = LPC_TIMER1;
GPTD2.resources = &timer1_resources;
#endif /* LPC43XX_GPT_USE_TIMER1 */
#if LPC43XX_GPT_USE_TIMER2
/* Driver initialization.*/
gptObjectInit(&GPTD3);
GPTD3.tmr = LPC_TIMER2;
GPTD3.resources = &timer2_resources;
#endif /* LPC43XX_GPT_USE_TIMER2 */
#if LPC43XX_GPT_USE_TIMER3
/* Driver initialization.*/
gptObjectInit(&GPTD4);
GPTD4.tmr = LPC_TIMER3;
GPTD4.resources = &timer3_resources;
#endif /* LPC43XX_GPT_USE_TIMER3 */
}
@ -190,30 +226,9 @@ void gpt_lld_start(GPTDriver *gptp) {
if (gptp->state == GPT_STOP) {
/* Enables the peripheral.*/
#if LPC43XX_GPT_USE_TIMER0
if (&GPTD1 == gptp) {
LPC_CCU1->CLK_M4_TIMER0_CFG.RUN = 1;
nvicEnableVector(TIMER0_IRQn, CORTEX_PRIORITY_MASK(LPC43XX_GPT_TIMER0_IRQ_PRIORITY));
}
#endif /* LPC43XX_GPT_USE_TIMER0 */
#if LPC43XX_GPT_USE_TIMER1
if (&GPTD2 == gptp) {
LPC_CCU1->CLK_M4_TIMER1_CFG.RUN = 1;
nvicEnableVector(TIMER1_IRQn, CORTEX_PRIORITY_MASK(LPC43XX_GPT_TIMER1_IRQ_PRIORITY));
}
#endif /* LPC43XX_GPT_USE_TIMER1 */
#if LPC43XX_GPT_USE_TIMER2
if (&GPTD3 == gptp) {
LPC_CCU1->CLK_M4_TIMER2_CFG.RUN = 1;
nvicEnableVector(TIMER2_IRQn, CORTEX_PRIORITY_MASK(LPC43XX_GPT_TIMER2_IRQ_PRIORITY));
}
#endif /* LPC43XX_GPT_USE_TIMER3 */
#if LPC43XX_GPT_USE_TIMER3
if (&GPTD4 == gptp) {
LPC_CCU1->CLK_M4_TIMER3_CFG.RUN = 1;
nvicEnableVector(TIMER3_IRQn, CORTEX_PRIORITY_MASK(LPC43XX_GPT_TIMER3_IRQ_PRIORITY));
}
#endif /* LPC43XX_GPT_USE_TIMER3 */
branch_clock_enable(&gptp->resources->branch);
peripheral_reset(&gptp->resources->reset);
interrupt_enable(&gptp->resources->interrupt);
}
/* Timer configuration.*/
@ -237,34 +252,9 @@ void gpt_lld_stop(GPTDriver *gptp) {
gptp->tmr->MCR = 0;
gptp->tmr->TCR = 0;
#if LPC43XX_GPT_USE_TIMER0
if (&GPTD1 == gptp) {
nvicDisableVector(TIMER0_IRQn);
LPC_CCU1->CLK_M4_TIMER0_CFG.AUTO = 1;
LPC_CCU1->CLK_M4_TIMER0_CFG.RUN = 0;
}
#endif /* LPC43XX_GPT_USE_TIMER0 */
#if LPC43XX_GPT_USE_TIMER1
if (&GPTD2 == gptp) {
nvicDisableVector(TIMER1_IRQn);
LPC_CCU1->CLK_M4_TIMER1_CFG.AUTO = 1;
LPC_CCU1->CLK_M4_TIMER1_CFG.RUN = 0;
}
#endif /* LPC43XX_GPT_USE_TIMER1 */
#if LPC43XX_GPT_USE_TIMER2
if (&GPTD3 == gptp) {
nvicDisableVector(TIMER2_IRQn);
LPC_CCU1->CLK_M4_TIMER2_CFG.AUTO = 1;
LPC_CCU1->CLK_M4_TIMER2_CFG.RUN = 0;
}
#endif /* LPC43XX_GPT_USE_TIMER2 */
#if LPC43XX_GPT_USE_TIMER3
if (&GPTD4 == gptp) {
nvicDisableVector(TIMER3_IRQn);
LPC_CCU1->CLK_M4_TIMER3_CFG.AUTO = 1;
LPC_CCU1->CLK_M4_TIMER3_CFG.RUN = 0;
}
#endif /* LPC43XX_GPT_USE_TIMER3 */
interrupt_disable(&gptp->resources->interrupt);
peripheral_reset(&gptp->resources->reset);
branch_clock_disable(&gptp->resources->branch);
}
}

13
firmware/chibios-portapack/os/hal/platforms/LPC43xx/gpt_lld.h
View File

@ -135,6 +135,15 @@
/* Driver data structures and types. */
/*===========================================================================*/
/**
* @brief Structure used for Timer configuration.
*/
typedef struct {
branch_clock_regs_t branch;
peripheral_reset_t reset;
interrupt_config_t interrupt;
} timer_resources_t;
/**
* @brief GPT frequency type.
*/
@ -185,6 +194,10 @@ struct GPTDriver {
* @brief Pointer to the TIMER registers block.
*/
LPC_TIMER_Type *tmr;
/**
* @brief Pointer to the non-peripheral Timer resources.
*/
const timer_resources_t * resources;
};
/*===========================================================================*/

65
firmware/chibios-portapack/os/hal/platforms/LPC43xx/i2c_lld.c
View File

@ -86,6 +86,22 @@ I2CDriver I2CD1;
/* Driver local variables and types. */
/*===========================================================================*/
#if LPC43XX_I2C_USE_I2C0
static const i2c_resources_t i2c0_resources = {
.base = { .clk = &LPC_CGU->BASE_APB1_CLK, .stat = &LPC_CCU1->BASE_STAT, .stat_mask = (1 << 1) },
.branch = { .cfg = &LPC_CCU1->CLK_APB1_I2C0_CFG, .stat = &LPC_CCU1->CLK_APB1_I2C0_STAT },
.reset = { .output_index = 48 },
};
#endif /* LPC43XX_I2C_USE_I2C0 */
#if LPC43XX_I2C_USE_I2C1
static const i2c_resources_t i2c1_resources = {
.base = { .clk = &LPC_CGU->BASE_APB3_CLK, .stat = &LPC_CCU1->BASE_STAT, .stat_mask = (1 << 0) },
.branch = { .cfg = &LPC_CCU1->CLK_APB3_I2C1_CFG, .stat = &LPC_CCU1->CLK_APB3_I2C1_STAT },
.reset = { .output_index = 49 },
};
#endif /* LPC43XX_I2C_USE_I2C1 */
/*===========================================================================*/
/* Driver local functions. */
/*===========================================================================*/
@ -364,12 +380,14 @@ void i2c_lld_init(void) {
i2cObjectInit(&I2CD0);
I2CD0.thread = NULL;
I2CD0.i2c = LPC_I2C0;
I2CD0.resources = &i2c0_resources;
#endif /* LPC43XX_I2C_USE_I2C0 */
#if LPC43XX_I2C_USE_I2C1 || defined(__DOXYGEN__)
i2cObjectInit(&I2CD1);
I2CD1.thread = NULL;
I2CD1.i2c = LPC_I2C1;
I2CD1.resources = &i2c1_resources;
#endif /* LPC43XX_I2C_USE_I2C1 */
}
@ -385,19 +403,9 @@ void i2c_lld_start(I2CDriver *i2cp) {
/* TODO: Reset peripheral, enable clocks? */
#if LPC43XX_I2C_USE_I2C0 || defined(__DOXYGEN__)
if (&I2CD0 == i2cp) {
////LPC_CCU1->CLK_APB1_I2C0_CFG.AUTO = 1;
LPC_CCU1->CLK_APB1_I2C0_CFG.RUN = 1;
}
#endif /* LPC43XX_I2C_USE_I2C0 */
#if LPC43XX_I2C_USE_I2C1 || defined(__DOXYGEN__)
if (&I2CD1 == i2cp) {
////LPC_CCU1->CLK_APB3_I2C1_CFG.AUTO = 1;
LPC_CCU1->CLK_APB3_I2C1_CFG.RUN = 1;
}
#endif /* LPC43XX_I2C_USE_I2C1 */
base_clock_enable(&i2cp->resources->base);
branch_clock_enable(&i2cp->resources->branch);
peripheral_reset(&i2cp->resources->reset);
i2c_periph_set_clock(dp, i2cp->config->high_count, i2cp->config->low_count);
i2c_periph_enable(dp);
@ -441,9 +449,16 @@ void i2c_lld_stop(I2CDriver *i2cp) {
#if defined(LPC43XX_M4)
nvicDisableVector(I2C0_IRQn);
#endif
i2c_periph_disable(dp);
LPC_CCU1->CLK_APB1_I2C0_CFG.AUTO = 1;
LPC_CCU1->CLK_APB1_I2C0_CFG.RUN = 0;
#if defined(LPC43XX_M0)
#if LPC43XX_I2C_USE_I2C1
if( I2CD1.state == I2C_STOP ) {
#endif
// TODO: This won't work if the I2C peripherals are split between cores!
nvicDisableVector(I2C0_OR_I2C1_IRQn);
#if LPC43XX_I2C_USE_I2C1
}
#endif
#endif
}
#endif /* LPC43XX_I2C_USE_I2C0 */
@ -452,11 +467,23 @@ void i2c_lld_stop(I2CDriver *i2cp) {
#if defined(LPC43XX_M4)
nvicDisableVector(I2C1_IRQn);
#endif
i2c_periph_disable(dp);
LPC_CCU1->CLK_APB3_I2C1_CFG.AUTO = 1;
LPC_CCU1->CLK_APB3_I2C1_CFG.RUN = 0;
#if defined(LPC43XX_M0)
#if LPC43XX_I2C_USE_I2C0
if( I2CD0.state == I2C_STOP ) {
#endif
// TODO: This won't work if the I2C peripherals are split between cores!
nvicDisableVector(I2C0_OR_I2C1_IRQn);
#if LPC43XX_I2C_USE_I2C0
}
#endif
#endif
}
#endif /* LPC43XX_I2C_USE_I2C1 */
i2c_periph_disable(dp);
peripheral_reset(&i2cp->resources->reset);
branch_clock_disable(&i2cp->resources->branch);
base_clock_disable(&i2cp->resources->base);
}
}

13
firmware/chibios-portapack/os/hal/platforms/LPC43xx/i2c_lld.h
View File

@ -96,6 +96,15 @@
/* Driver data structures and types. */
/*===========================================================================*/
/**
* @brief Structure used for I2C configuration.
*/
typedef struct {
base_clock_regs_t base;
branch_clock_regs_t branch;
peripheral_reset_t reset;
} i2c_resources_t;
typedef LPC_I2Cx_Type* I2C_TypeDef;
/**
@ -181,6 +190,10 @@ struct I2CDriver {
* @brief Pointer to the I2Cx registers block.
*/
I2C_TypeDef i2c;
/**
* @brief Pointer to the non-peripheral I2C resources.
*/
const i2c_resources_t * resources;
};
/**

68
firmware/chibios-portapack/os/hal/platforms/LPC43xx/lpc43xx.c Normal file
View File

@ -0,0 +1,68 @@
/*
Copyright (C) 2018 Jared Boone, ShareBrained Technology
Licensed under the Apache License, Version 2.0 (the "License");
you may not use this file except in compliance with the License.
You may obtain a copy of the License at
http://www.apache.org/licenses/LICENSE-2.0
Unless required by applicable law or agreed to in writing, software
distributed under the License is distributed on an "AS IS" BASIS,
WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
See the License for the specific language governing permissions and
limitations under the License.
*/
#include "hal.h"
void peripheral_reset(const peripheral_reset_t* const reset) {
const size_t register_index = (reset->output_index >> 5) & 1;
const size_t bit_shift = reset->output_index & 0x1f;
const uint32_t mask = (1U << bit_shift);
LPC_RGU->RESET_CTRL[register_index] = mask | (~LPC_RGU->RESET_ACTIVE_STATUS[register_index]);
while((LPC_RGU->RESET_ACTIVE_STATUS[register_index] & mask) == 0);
}
void base_clock_enable(const base_clock_regs_t* const base) {
if( base->clk->PD ) {
base->clk->AUTOBLOCK = 1;
//base->clk->CLK_SEL = ?;
base->clk->PD = 0;
}
}
void base_clock_disable(const base_clock_regs_t* const base) {
if( !base->clk->PD ) {
// Are all branch clocks switched off?
// NOTE: Field stat must be valid memory address.
// NOTE: Field stat_mask is zero if there's no means to check if a base clock is in use.
if( (*base->stat & base->stat_mask) == 0 ) {
base->clk->PD = 1;
//base->clk->CLK_SEL = IRC?;
}
}
}
void branch_clock_enable(const branch_clock_regs_t* const branch) {
if( !branch->stat->RUN ) {
branch->cfg->AUTO = 1;
branch->cfg->RUN = 1;
while(!branch->stat->RUN);
}
}
void branch_clock_disable(const branch_clock_regs_t* const branch) {
if( branch->stat->RUN ) {
branch->cfg->RUN = 0;
while(branch->stat->RUN);
}
}
void interrupt_enable(const interrupt_config_t* const interrupt) {
nvicEnableVector(interrupt->irq, interrupt->priority_mask);
}
void interrupt_disable(const interrupt_config_t* const interrupt) {
nvicDisableVector(interrupt->irq);
}

51
firmware/chibios-portapack/os/hal/platforms/LPC43xx/lpc43xx.h Normal file
View File

@ -0,0 +1,51 @@
/*
Copyright (C) 2018 Jared Boone, ShareBrained Technology
Licensed under the Apache License, Version 2.0 (the "License");
you may not use this file except in compliance with the License.
You may obtain a copy of the License at
http://www.apache.org/licenses/LICENSE-2.0
Unless required by applicable law or agreed to in writing, software
distributed under the License is distributed on an "AS IS" BASIS,
WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
See the License for the specific language governing permissions and
limitations under the License.
*/
#ifndef _LPC43XX_H_
#define _LPC43XX_H_
typedef struct {
LPC_CGU_BASE_CLK_Type* clk;
__I uint32_t* stat;
uint32_t stat_mask;
} base_clock_regs_t;
typedef struct {
LPC_CCU1_CFG_160_Type* cfg;
LPC_CCU_STAT_Type* stat;
} branch_clock_regs_t;
typedef struct {
uint_fast8_t output_index;
} peripheral_reset_t;
typedef struct {
IRQn_Type irq;
uint32_t priority_mask;
} interrupt_config_t;
void peripheral_reset(const peripheral_reset_t* const reset);
void base_clock_enable(const base_clock_regs_t* const base);
void base_clock_disable(const base_clock_regs_t* const base);
void branch_clock_enable(const branch_clock_regs_t* const branch);
void branch_clock_disable(const branch_clock_regs_t* const branch);
void interrupt_enable(const interrupt_config_t* const interrupt);
void interrupt_disable(const interrupt_config_t* const interrupt);
#endif /* _LPC43XX_H_ */

107
firmware/chibios-portapack/os/hal/platforms/LPC43xx/lpc43xx.inc
View File

@ -98,11 +98,14 @@ typedef struct {
uint32_t RESERVED0 : 3;
} LPC_CGU_FREQ_MON_Type;
typedef struct {
__IO uint32_t ENABLE : 1;
__IO uint32_t BYPASS : 1;
__IO uint32_t HF : 1;
uint32_t RESERVED0 : 29;
typedef union {
struct {
__IO uint32_t ENABLE : 1;
__IO uint32_t BYPASS : 1;
__IO uint32_t HF : 1;
uint32_t RESERVED0 : 29;
};
__IO uint32_t word;
} LPC_CGU_XTAL_OSC_CTRL_Type;
typedef struct {
@ -146,18 +149,21 @@ typedef struct {
__IO uint32_t CLK_SEL : 5;
uint32_t RESERVED3 : 3;
} LPC_CGU_PLL1_CTRL_Type;
/*
typedef struct {
__IO uint32_t PD : 1;
uint32_t RESERVED0 : 1;
__IO uint32_t IDIV : 2;
uint32_t RESERVED1 : 7;
__IO uint32_t AUTOBLOCK : 1;
uint32_t RESERVED2 : 12;
__IO uint32_t CLK_SEL : 5;
uint32_t RESERVED3 : 3;
typedef union {
struct {
__IO uint32_t PD : 1;
uint32_t RESERVED0 : 1;
__IO uint32_t IDIV : 2;
uint32_t RESERVED1 : 7;
__IO uint32_t AUTOBLOCK : 1;
uint32_t RESERVED2 : 12;
__IO uint32_t CLK_SEL : 5;
uint32_t RESERVED3 : 3;
};
__IO uint32_t word;
} LPC_CGU_IDIVx_CTRL_Type;
*/
typedef struct {
__I uint32_t PD : 1;
uint32_t RESERVED0 : 10;
@ -167,13 +173,16 @@ typedef struct {
uint32_t RESERVED2 : 3;
} LPC_CGU_BASE_SAFE_CLK_Type;
typedef struct {
__IO uint32_t PD : 1;
uint32_t RESERVED0 : 10;
__IO uint32_t AUTOBLOCK : 1;
uint32_t RESERVED1 : 12;
__IO uint32_t CLK_SEL : 5;
uint32_t RESERVED2 : 3;
typedef union {
struct {
__IO uint32_t PD : 1;
uint32_t RESERVED0 : 10;
__IO uint32_t AUTOBLOCK : 1;
uint32_t RESERVED1 : 12;
__IO uint32_t CLK_SEL : 5;
uint32_t RESERVED2 : 3;
};
__IO uint32_t word;
} LPC_CGU_BASE_CLK_Type;
typedef struct {
@ -191,11 +200,11 @@ typedef struct {
__IO uint32_t PLL0AUDIO_FRAC;
__I uint32_t PLL1_STAT; /* +0x040 */
__IO uint32_t PLL1_CTRL;
__IO uint32_t IDIVA_CTRL;
__IO uint32_t IDIVB_CTRL;
__IO uint32_t IDIVC_CTRL; /* +0x050 */
__IO uint32_t IDIVD_CTRL;
__IO uint32_t IDIVE_CTRL;
LPC_CGU_IDIVx_CTRL_Type IDIVA_CTRL;
LPC_CGU_IDIVx_CTRL_Type IDIVB_CTRL;
LPC_CGU_IDIVx_CTRL_Type IDIVC_CTRL; /* +0x050 */
LPC_CGU_IDIVx_CTRL_Type IDIVD_CTRL;
LPC_CGU_IDIVx_CTRL_Type IDIVE_CTRL;
LPC_CGU_BASE_SAFE_CLK_Type BASE_SAFE_CLK;
LPC_CGU_BASE_CLK_Type BASE_USB0_CLK; /* +0x060 */
LPC_CGU_BASE_CLK_Type BASE_PERIPH_CLK;
@ -1065,6 +1074,47 @@ typedef struct {
__IO uint32_t CTCR;
} LPC_TIMER_Type;
// ------------------------------------------------------------------------------------------------
// ----- MOTOCONPWM -----
// ------------------------------------------------------------------------------------------------
/**
* @brief Product name title=UM10503 Chapter title=LPC43xx Motor Control PWM (MOTOCONPWM) Modification date=7/26/2017 Major revision=2 Minor revision=3
*/
typedef struct {
__I uint32_t CON;
__O uint32_t CON_SET;
__O uint32_t CON_CLR;
__I uint32_t CAPCON;
__O uint32_t CAPCON_SET;
__O uint32_t CAPCON_CLR;
__IO uint32_t TC0;
__IO uint32_t TC1;
__IO uint32_t TC2;
__IO uint32_t LIM0;
__IO uint32_t LIM1;
__IO uint32_t LIM2;
__IO uint32_t MAT0;
__IO uint32_t MAT1;
__IO uint32_t MAT2;
__IO uint32_t DT;
__IO uint32_t MCCP;
__I uint32_t CAP0;
__I uint32_t CAP1;
__I uint32_t CAP2;
__I uint32_t INTEN;
__O uint32_t INTEN_SET;
__O uint32_t INTEN_CLR;
__I uint32_t CNTCON;
__O uint32_t CNTCON_SET;
__O uint32_t CNTCON_CLR;
__I uint32_t INTF;
__O uint32_t INTF_SET;
__O uint32_t INTF_CLR;
__O uint32_t CAP_CLR;
} LPC_MCPWM_Type;
// ------------------------------------------------------------------------------------------------
// ----- RITIMER -----
// ------------------------------------------------------------------------------------------------
@ -1409,6 +1459,7 @@ typedef struct {
#define LPC_USART3 ((LPC_USART_Type *) LPC_USART3_BASE)
#define LPC_TIMER2 ((LPC_TIMER_Type *) LPC_TIMER2_BASE)
#define LPC_TIMER3 ((LPC_TIMER_Type *) LPC_TIMER3_BASE)
#define LPC_MCPWM ((LPC_MCPWM_Type *) LPC_MCPWM_BASE)
#define LPC_SSP1 ((LPC_SSPx_Type *) LPC_SSP1_BASE)
#define LPC_I2C1 ((LPC_I2Cx_Type *) LPC_I2C1_BASE)
#define LPC_ADC0 ((LPC_ADCx_Type *) LPC_ADC0_BASE)

72
firmware/chibios-portapack/os/hal/platforms/LPC43xx/pal_lld.c
View File

@ -40,10 +40,74 @@
/* Driver local variables and types. */
/*===========================================================================*/
static const scu_config_t pin_config_vaa_enablex_pwm = { .MODE=1, .EPD=0, .EPUN=1, .EHS=0, .EZI=0, .ZIF=0 };
static const scu_config_t pin_config_vaa_enablex_gpio = { .MODE=0, .EPD=0, .EPUN=1, .EHS=0, .EZI=0, .ZIF=0 };
/*===========================================================================*/
/* Driver local functions. */
/*===========================================================================*/
/* VAA powers:
* MAX5864 analog section.
* MAX2837 registers and other functions.
* RFFC5072 analog section.
*
* Beware that power applied to pins of the MAX2837 may
* show up on VAA and start powering other components on the
* VAA net. So turn on VAA before driving pins from MCU to
* MAX2837.
*/
static void vaa_power_on(void) {
/* Very twitchy process for powering up VAA without glitching the 3.3V rail, which can send the
* microcontroller into reset.
*
* Controlling timing while running from SPIFI flash is tricky, hence use of a PWM peripheral...
*/
/* Configure and enable MOTOCONPWM peripheral clocks.
* Assume IDIVC is running the post-bootloader configuration, outputting 96MHz derived from PLL1.
*/
LPC_CCU1->CLK_APB1_MOTOCON_PWM_CFG.RUN = true;
/* Combination of pulse duration and duty cycle was arrived at empirically, to keep supply glitching
* to +/- 0.15V.
*/
const uint32_t cycle_period = 128;
const uint32_t enable_period = 10;
LPC_MCPWM->TC2 = 0;
LPC_MCPWM->MAT2 = cycle_period - enable_period;
LPC_MCPWM->LIM2 = cycle_period;
/* Switch !VAA_ENABLE pin from GPIO to MOTOCONPWM peripheral output, now that the peripheral is configured. */
LPC_SCU->SFSP[5][ 0] = pin_config_vaa_enablex_pwm.word; // P5_0 /GPIO2[ 9]/MCOB2: !VAA_ENABLE, 10K PU
/* Start the PWM operation. */
LPC_MCPWM->CON_SET = (1 << 16);
/* Wait until VAA rises to approximately 90% of final voltage. */
/* Timing assumes we're running immediately after the bootloader: 96 MHz from IRC+PLL1
*/
{ volatile uint32_t delay = 12000; while(delay--); }
/* Hold !VAA_ENABLE active using a GPIO, so we can reclaim and shut down the MOTOCONPWM peripheral. */
LPC_GPIO->CLR[2] = (1 << 9); // !VAA_ENABLE
LPC_GPIO->DIR[2] |= (1 << 9);
LPC_SCU->SFSP[5][ 0] = pin_config_vaa_enablex_gpio.word; // P5_0 /GPIO2[ 9]/MCOB2: !VAA_ENABLE, 10K PU
/* Reset the MOTOCONPWM peripheral. */
LPC_RGU->RESET_CTRL[1] = (1U << 6);
/* Shut down the MOTOCONPWM clocks. */
LPC_CCU1->CLK_APB1_MOTOCON_PWM_CFG.RUN = false;
}
static void vaa_power_off(void) {
// TODO: There's a lot of other stuff that must be done to prevent
// leakage from +3V3 into VAA.
LPC_GPIO->W2[9] = 1;
}
/*===========================================================================*/
/* Driver interrupt handlers. */
/*===========================================================================*/
@ -52,6 +116,8 @@
/* Driver exported functions. */
/*===========================================================================*/
#define ARRAY_SIZE(a) (sizeof(a)/sizeof(a[0]))
/**
* @brief LPC43xx I/O ports configuration.
* @details Ports 0 through 8.
@ -65,6 +131,12 @@ void _pal_lld_init(const PALConfig *config) {
LPC_GPIO->PIN[i] = config->P[i].data;
LPC_GPIO->DIR[i] = config->P[i].dir;
}
for(size_t i=0; i<ARRAY_SIZE(config->SCU); i++) {
LPC_SCU->SFSP[config->SCU[i].port][config->SCU[i].pin] = config->SCU[i].config.word;
}
vaa_power_on();
}
/**

22
firmware/chibios-portapack/os/hal/platforms/LPC43xx/pal_lld.h
View File

@ -51,6 +51,27 @@ typedef struct {
uint32_t dir;
} gpio_setup_t;
typedef struct {
union {
struct {
uint16_t MODE : 3;
uint16_t EPD : 1;
uint16_t EPUN : 1;
uint16_t EHS : 1;
uint16_t EZI : 1;
uint16_t ZIF : 1;
uint16_t RESERVED0 : 8;
};
uint16_t word;
};
} scu_config_t;
typedef struct {
uint8_t port;
uint8_t pin;
scu_config_t config;
} scu_setup_t;
/**
* @brief Generic I/O ports static initializer.
* @details An instance of this structure must be passed to @p palInit() at
@ -63,6 +84,7 @@ typedef struct {
typedef struct {
/** @brief GPIO setup data.*/
gpio_setup_t P[8];
scu_setup_t SCU[86];
} PALConfig;
/**

31
firmware/chibios-portapack/os/hal/platforms/LPC43xx/sdc_lld.c
View File

@ -47,6 +47,16 @@ SDCDriver SDCD1;
/* Driver local variables and types. */
/*===========================================================================*/
#if LPC_SDC_USE_SDC1
static const sdio_resources_t sdio_resources = {
.base = { .clk = &LPC_CGU->BASE_SDIO_CLK, .stat = &LPC_CCU2->BASE_STAT, .stat_mask = 0 },
.branch_register_if = { .cfg = &LPC_CCU1->CLK_M4_SDIO_CFG, .stat = &LPC_CCU1->CLK_M4_SDIO_STAT },
.branch_peripheral = { .cfg = &LPC_CCU2->CLK_SDIO_CFG, .stat = &LPC_CCU2->CLK_SDIO_STAT },
.reset = { .output_index = 20 },
.interrupt = { .irq = SDIO_IRQn, .priority_mask = CORTEX_PRIORITY_MASK(LPC_SDC_SDIO_IRQ_PRIORITY) },
};
#endif
/*===========================================================================*/
/* Driver local functions. */
/*===========================================================================*/
@ -561,6 +571,7 @@ CH_IRQ_HANDLER(SDIO_IRQHandler) {
void sdc_lld_init(void) {
sdcObjectInit(&SDCD1);
SDCD1.resources = &sdio_resources;
SDCD1.thread = NULL;
/* Assuming there's a global reset when the hardware is initialized.
@ -578,10 +589,12 @@ void sdc_lld_init(void) {
void sdc_lld_start(SDCDriver *sdcp) {
if (sdcp->state == BLK_STOP) {
LPC_SDMMC->CLKENA = (1U << 16); /* CCLK_LOW_POWER */
base_clock_enable(&sdcp->resources->base);
branch_clock_enable(&sdcp->resources->branch_register_if);
branch_clock_enable(&sdcp->resources->branch_peripheral);
peripheral_reset(&sdcp->resources->reset);
LPC_CCU1->CLK_M4_SDIO_CFG.RUN = 1;
LPC_CGU->BASE_SDIO_CLK.PD = 0;
LPC_SDMMC->CLKENA = (1U << 16); /* CCLK_LOW_POWER */
sdio_reset();
sdio_reset_card();
@ -623,8 +636,7 @@ void sdc_lld_start(SDCDriver *sdcp) {
sdio_interrupts_set_mask(0);
sdio_interrupts_clear();
nvicEnableVector(SDIO_IRQn,
CORTEX_PRIORITY_MASK(LPC_SDC_SDIO_IRQ_PRIORITY));
interrupt_enable(&sdcp->resources->interrupt);
}
}
@ -638,7 +650,7 @@ void sdc_lld_start(SDCDriver *sdcp) {
void sdc_lld_stop(SDCDriver *sdcp) {
if (sdcp->state != BLK_STOP) {
nvicDisableVector(SDIO_IRQn);
interrupt_disable(&sdcp->resources->interrupt);
/* Quickest way to return peripheral and card to known (and low power)
* state is to reset both. Right?
@ -646,9 +658,10 @@ void sdc_lld_stop(SDCDriver *sdcp) {
sdio_reset();
sdio_reset_card();
LPC_CGU->BASE_SDIO_CLK.PD = 1;
LPC_CCU1->CLK_M4_SDIO_CFG.AUTO = 1;
LPC_CCU1->CLK_M4_SDIO_CFG.RUN = 0;
peripheral_reset(&sdcp->resources->reset);
branch_clock_disable(&sdcp->resources->branch_peripheral);
branch_clock_disable(&sdcp->resources->branch_register_if);
base_clock_disable(&sdcp->resources->base);
}
}

15
firmware/chibios-portapack/os/hal/platforms/LPC43xx/sdc_lld.h
View File

@ -76,6 +76,17 @@
/* Driver data structures and types. */
/*===========================================================================*/
/**
* @brief Structure used for SDIO configuration.
*/
typedef struct {
base_clock_regs_t base;
branch_clock_regs_t branch_register_if;
branch_clock_regs_t branch_peripheral;
peripheral_reset_t reset;
interrupt_config_t interrupt;
} sdio_resources_t;
/**
* @brief Type of SDIO bus mode.
*/
@ -149,6 +160,10 @@ struct SDCDriver {
*/
uint32_t rca;
/* End of the mandatory fields.*/
/**
* @brief Pointer to the non-peripheral SDIO resources.
*/
const sdio_resources_t * resources;
/**
* @brief Thread waiting for I/O completion IRQ.
*/

149
firmware/chibios-portapack/os/hal/platforms/LPC43xx/serial_lld.c
View File

@ -63,6 +63,48 @@ static const SerialConfig default_config = {
FCR_TRIGGER0
};
#if LPC_SERIAL_USE_USART0
static const uart_resources_t usart0_resources = {
.base = { .clk = &LPC_CGU->BASE_UART0_CLK, .stat = &LPC_CCU2->BASE_STAT, .stat_mask = (1 << 4) },
.branch_register_if = { .cfg = &LPC_CCU1->CLK_M4_USART0_CFG, .stat = &LPC_CCU1->CLK_M4_USART0_STAT },
.branch_peripheral = { .cfg = &LPC_CCU2->CLK_APB0_USART0_CFG, .stat = &LPC_CCU2->CLK_APB0_USART0_STAT },
.reset = { .output_index = 44 },
.interrupt = { .irq = USART0_IRQn, priority_mask = CORTEX_PRIORITY_MASK(LPC_SERIAL_USART0_IRQ_PRIORITY) },
};
#endif
#if LPC_SERIAL_USE_UART1
static const uart_resources_t uart1_resources = {
.base = { .clk = &LPC_CGU->BASE_UART1_CLK, .stat = &LPC_CCU2->BASE_STAT, .stat_mask = (1 << 3) },
.branch_register_if = { .cfg = &LPC_CCU1->CLK_M4_UART1_CFG, .stat = &LPC_CCU1->CLK_M4_UART1_STAT },
.branch_peripheral = { .cfg = &LPC_CCU2->CLK_APB0_UART1_CFG, .stat = &LPC_CCU2->CLK_APB0_UART1_STAT },
.reset = { .output_index = 45 },
.interrupt = { .irq = UART1_IRQn, priority_mask = CORTEX_PRIORITY_MASK(LPC_SERIAL_UART1_IRQ_PRIORITY) },
};
#endif
#if LPC_SERIAL_USE_USART2
static const uart_resources_t usart2_resources = {
.base = { .clk = &LPC_CGU->BASE_UART2_CLK, .stat = &LPC_CCU2->BASE_STAT, .stat_mask = (1 << 2) },
.branch_register_if = { .cfg = &LPC_CCU1->CLK_M4_USART2_CFG, .stat = &LPC_CCU1->CLK_M4_USART2_STAT },
.branch_peripheral = { .cfg = &LPC_CCU2->CLK_APB2_USART2_CFG, .stat = &LPC_CCU2->CLK_APB2_USART2_STAT },
.reset = { .output_index = 46 },
#if defined(LPC43XX_M4)
.interrupt = { .irq = USART2_IRQn, priority_mask = CORTEX_PRIORITY_MASK(LPC_SERIAL_USART2_IRQ_PRIORITY) },
#endif
#if defined(LPC43XX_M0)
.interrupt = { .irq = USART2_OR_C_CAN1_IRQn, priority_mask = CORTEX_PRIORITY_MASK(LPC_SERIAL_USART2_IRQ_PRIORITY) },
#endif
};
#endif
#if LPC_SERIAL_USE_USART3
static const uart_resources_t usart3_resources = {
.base = { .clk = &LPC_CGU->BASE_UART3_CLK, .stat = &LPC_CCU2->BASE_STAT, .stat_mask = (1 << 1) },
.branch_register_if = { .cfg = &LPC_CCU1->CLK_M4_USART3_CFG, .stat = &LPC_CCU1->CLK_M4_USART3_STAT },
.branch_peripheral = { .cfg = &LPC_CCU2->CLK_APB2_USART3_CFG, .stat = &LPC_CCU2->CLK_APB2_USART3_STAT },
.reset = { .output_index = 47 },
.interrupt = { .irq = USART3_IRQn, priority_mask = CORTEX_PRIORITY_MASK(LPC_SERIAL_USART3_IRQ_PRIORITY) },
};
#endif
/*===========================================================================*/
/* Driver local functions. */
/*===========================================================================*/
@ -337,21 +379,25 @@ void sd_lld_init(void) {
#if LPC_SERIAL_USE_USART0
sdObjectInit(&SD1, NULL, notify1);
SD1.uart = LPC_USART0;
SD1.resources = &usart0_resources;
#endif
#if LPC_SERIAL_USE_UART1
sdObjectInit(&SD2, NULL, notify2);
SD2.uart = (LPC_USART_Type *) LPC_UART1;
SD2.resources = &uart1_resources;
#endif
#if LPC_SERIAL_USE_USART2
sdObjectInit(&SD3, NULL, notify3);
SD3.uart = LPC_USART2;
SD3.resources = &usart2_resources;
#endif
#if LPC_SERIAL_USE_USART3
sdObjectInit(&SD4, NULL, notify4);
SD4.uart = LPC_USART3;
SD4.resources = &usart3_resources;
#endif
}
@ -371,48 +417,11 @@ void sd_lld_start(SerialDriver *sdp, const SerialConfig *config) {
config = &default_config;
if (sdp->state == SD_STOP) {
#if LPC_SERIAL_USE_USART0
if (&SD1 == sdp) {
LPC_CCU1->CLK_M4_USART0_CFG.RUN = 1; /* Register interface branch clock. */
LPC_CGU->BASE_UART0_CLK.PD = 0; /* Peripheral base clock. */
LPC_CCU2->CLK_APB0_USART0_CFG.RUN = 1; /* Peripheral branch clock. */
nvicEnableVector(USART0_IRQn,
CORTEX_PRIORITY_MASK(LPC_SERIAL_USART0_IRQ_PRIORITY));
}
#endif
#if LPC_SERIAL_USE_UART1
if (&SD2 == sdp) {
LPC_CCU1->CLK_M4_UART1_CFG.RUN = 1; /* Register interface branch clock. */
LPC_CGU->BASE_UART1_CLK.PD = 0; /* Peripheral base clock. */
LPC_CCU2->CLK_APB0_UART1_CFG.RUN = 1; /* Peripheral branch clock. */
nvicEnableVector(UART1_IRQn,
CORTEX_PRIORITY_MASK(LPC_SERIAL_UART1_IRQ_PRIORITY));
}
#endif
#if LPC_SERIAL_USE_USART2
if (&SD3 == sdp) {
LPC_CCU1->CLK_M4_USART2_CFG.RUN = 1; /* Register interface branch clock. */
LPC_CGU->BASE_UART2_CLK.PD = 0; /* Peripheral base clock. */
LPC_CCU2->CLK_APB2_USART2_CFG.RUN = 1; /* Peripheral branch clock. */
#if defined(LPC43XX_M4)
nvicEnableVector(USART2_IRQn,
CORTEX_PRIORITY_MASK(LPC_SERIAL_USART2_IRQ_PRIORITY));
#endif
#if defined(LPC43XX_M0)
nvicEnableVector(USART2_OR_C_CAN1_IRQn,
CORTEX_PRIORITY_MASK(LPC_SERIAL_USART2_IRQ_PRIORITY));
#endif
}
#endif
#if LPC_SERIAL_USE_USART3
if (&SD4 == sdp) {
LPC_CCU1->CLK_M4_USART3_CFG.RUN = 1; /* Register interface branch clock. */
LPC_CGU->BASE_UART3_CLK.PD = 0; /* Peripheral base clock. */
LPC_CCU2->CLK_APB2_USART3_CFG.RUN = 1; /* Peripheral branch clock. */
nvicEnableVector(USART3_IRQn,
CORTEX_PRIORITY_MASK(LPC_SERIAL_USART3_IRQ_PRIORITY));
}
#endif
base_clock_enable(&sdp->resources->base);
branch_clock_enable(&sdp->resources->branch_register_if);
branch_clock_enable(&sdp->resources->branch_peripheral);
peripheral_reset(&sdp->resources->reset);
interrupt_enable(&sdp->resources->interrupt);
}
uart_init(sdp, config);
}
@ -429,56 +438,12 @@ void sd_lld_start(SerialDriver *sdp, const SerialConfig *config) {
void sd_lld_stop(SerialDriver *sdp) {
if (sdp->state == SD_READY) {
uart_deinit(sdp->uart);
#if LPC_SERIAL_USE_USART0
if (&SD1 == sdp) {
LPC_CCU2->CLK_APB0_USART0_CFG.AUTO = 1; /* Peripheral branch clock. */
LPC_CCU2->CLK_APB0_USART0_CFG.RUN = 0;
LPC_CGU->BASE_UART0_CLK.PD = 1; /* Peripheral base clock. */
LPC_CCU1->CLK_M4_USART0_CFG.AUTO = 1; /* Register interface branch clock. */
LPC_CCU1->CLK_M4_USART0_CFG.RUN = 0;
nvicDisableVector(USART0_IRQn);
return;
}
#endif
#if LPC_SERIAL_USE_UART1
if (&SD2 == sdp) {
LPC_CCU2->CLK_APB0_UART1_CFG.AUTO = 1; /* Peripheral branch clock. */
LPC_CCU2->CLK_APB0_UART0_CFG.RUN = 0;
LPC_CGU->BASE_UART1_CLK.PD = 1; /* Peripheral base clock. */
LPC_CCU1->CLK_M4_UART1_CFG.AUTO = 1; /* Register interface branch clock. */
LPC_CCU1->CLK_M4_UART1_CFG.RUN = 0;
nvicDisableVector(UART1_IRQn);
return;
}
#endif
#if LPC_SERIAL_USE_USART2
if (&SD3 == sdp) {
LPC_CCU2->CLK_APB2_USART2_CFG.AUTO = 1; /* Peripheral branch clock. */
LPC_CCU2->CLK_APB2_USART2_CFG.RUN = 0;
LPC_CGU->BASE_UART2_CLK.PD = 1; /* Peripheral base clock. */
LPC_CCU1->CLK_M4_USART2_CFG.AUTO = 1; /* Register interface branch clock. */
LPC_CCU1->CLK_M4_USART2_CFG.RUN = 0;
#if defined(LPC43XX_M4)
nvicDisableVector(USART2_IRQn);
#endif
#if defined(LPC43XX_M0)
nvicDisableVector(USART2_OR_C_CAN1_IRQn);
#endif
return;
}
#endif
#if LPC_SERIAL_USE_USART3
if (&SD4 == sdp) {
LPC_CCU2->CLK_APB2_USART3_CFG.AUTO = 1; /* Peripheral branch clock. */
LPC_CCU2->CLK_APB2_USART3_CFG.RUN = 0;
LPC_CGU->BASE_UART3_CLK.PD = 1; /* Peripheral base clock. */
LPC_CCU1->CLK_M4_USART3_CFG.AUTO = 1; /* Register interface branch clock. */
LPC_CCU1->CLK_M4_USART3_CFG.RUN = 0;
nvicDisableVector(USART3_IRQn);
return;
}
#endif
uart_deinit(&sdp->uart);
interrupt_disable(&sdp->resources->interrupt);
peripheral_reset(&sdp->resources->reset);
branch_clock_disable(&sdp->resources->branch_peripheral);
branch_clock_disable(&sdp->resources->branch_register_if);
base_clock_disable(&sdp->resources->base);
}
}

15
firmware/chibios-portapack/os/hal/platforms/LPC43xx/serial_lld.h
View File

@ -257,6 +257,17 @@
/* Driver data structures and types. */
/*===========================================================================*/
/**
* @brief Structure used for UART configuration.
*/
typedef struct {
base_clock_regs_t base;
branch_clock_regs_t branch_register_if;
branch_clock_regs_t branch_peripheral;
peripheral_reset_t reset;
interrupt_config_t interrupt;
} uart_resources_t;
/**
* @brief LPC Serial Driver configuration structure.
* @details An instance of this structure must be passed to @p sdStart()
@ -294,7 +305,9 @@ typedef struct {
uint8_t ob[SERIAL_BUFFERS_SIZE]; \
/* End of the mandatory fields.*/ \
/* Pointer to the UART registers block.*/ \
LPC_USART_Type *uart;
LPC_USART_Type *uart; \
/* Pointer to the non-peripheral SSP resources.*/ \
const ssp_resources_t * resources;
/*===========================================================================*/
/* Driver macros. */

67
firmware/chibios-portapack/os/hal/platforms/LPC43xx/spi_lld.c
View File

@ -48,6 +48,24 @@ SPIDriver SPID2;
/* Driver local variables and types. */
/*===========================================================================*/
#if LPC_SPI_USE_SSP0
static const ssp_resources_t ssp0_resources = {
.base = { .clk = &LPC_CGU->BASE_SSP0_CLK, .stat = &LPC_CCU2->BASE_STAT, .stat_mask = (1U << 6) },
.branch_register_if = { .cfg = &LPC_CCU1->CLK_M4_SSP0_CFG, .stat = &LPC_CCU1->CLK_M4_SSP0_STAT },
.branch_peripheral = { .cfg = &LPC_CCU2->CLK_APB0_SSP0_CFG, .stat = &LPC_CCU2->CLK_APB0_SSP0_STAT },
.reset = { .output_index = 50 },
};
#endif /* LPC_SPI_USE_SSP0 */
#if LPC_SPI_USE_SSP1
static const ssp_resources_t ssp1_resources = {
.base = { .clk = &LPC_CGU->BASE_SSP1_CLK, .stat = &LPC_CCU2->BASE_STAT, .stat_mask = (1U << 5) },
.branch_register_if = { .cfg = &LPC_CCU1->CLK_M4_SSP1_CFG, .stat = &LPC_CCU1->CLK_M4_SSP1_STAT },
.branch_peripheral = { .cfg = &LPC_CCU2->CLK_APB2_SSP1_CFG, .stat = &LPC_CCU2->CLK_APB2_SSP1_STAT },
.reset = { .output_index = 51 },
};
#endif /* LPC_SPI_USE_SSP1 */
/*===========================================================================*/
/* Driver local functions. */
/*===========================================================================*/
@ -194,11 +212,13 @@ void spi_lld_init(void) {
#if LPC_SPI_USE_SSP0
spiObjectInit(&SPID1);
SPID1.ssp = LPC_SSP0;
SPID1.resources = &ssp0_resources;
#endif /* LPC_SPI_USE_SSP0 */
#if LPC_SPI_USE_SSP1
spiObjectInit(&SPID2);
SPID2.ssp = LPC_SSP1;
SPID2.resources = &ssp1_resources;
#endif /* LPC_SPI_USE_SSP0 */
}
@ -212,11 +232,12 @@ void spi_lld_init(void) {
void spi_lld_start(SPIDriver *spip) {
if (spip->state == SPI_STOP) {
/* Clock activation.*/
base_clock_enable(&spip->resources->base);
branch_clock_enable(&spip->resources->branch_register_if);
branch_clock_enable(&spip->resources->branch_peripheral);
peripheral_reset(&spip->resources->reset);
#if LPC_SPI_USE_SSP0
if (&SPID1 == spip) {
LPC_CCU1->CLK_M4_SSP0_CFG.RUN = 1;
LPC_CGU->BASE_SSP0_CLK.PD = 0;
#if defined(LPC43XX_M4)
nvicEnableVector(SSP0_IRQn,
CORTEX_PRIORITY_MASK(LPC_SPI_SSP0_IRQ_PRIORITY));
@ -229,8 +250,6 @@ void spi_lld_start(SPIDriver *spip) {
#endif
#if LPC_SPI_USE_SSP1
if (&SPID2 == spip) {
LPC_CCU1->CLK_M4_SSP1_CFG.RUN = 1;
LPC_CGU->BASE_SSP1_CLK.PD = 0;
#if defined(LPC43XX_M4)
nvicEnableVector(SSP1_IRQn,
CORTEX_PRIORITY_MASK(LPC_SPI_SSP1_IRQ_PRIORITY));
@ -267,18 +286,44 @@ void spi_lld_stop(SPIDriver *spip) {
spip->ssp->IMSC = 0;
#if LPC_SPI_USE_SSP0
if (&SPID1 == spip) {
LPC_CGU->BASE_SSP0_CLK.PD = 1;
LPC_CCU1->CLK_M4_SSP0_CFG.AUTO = 1;
LPC_CCU1->CLK_M4_SSP0_CFG.RUN = 0;
#if defined(LPC43XX_M4)
nvicDisableVector(SSP0_IRQn);
#endif
#if defined(LPC43XX_M0)
#if LPC_SPI_USE_SSP1
/* Disable only if other SSP is stopped. */
/* TODO: Won't work correctly if SSPs are split between cores! */
if(SPID2.state == SPI_STOP) {
#endif
nvicDisableVector(SSP0_OR_SSP1_IRQn);
#if LPC_SPI_USE_SSP1
}
#endif
#endif
}
#endif
#if LPC_SPI_USE_SSP1
if (&SPID2 == spip) {
LPC_CGU->BASE_SSP1_CLK.PD = 1;
LPC_CCU1->CLK_M4_SSP1_CFG.AUTO = 1;
LPC_CCU1->CLK_M4_SSP1_CFG.RUN = 0;
#if defined(LPC43XX_M4)
nvicDisableVector(SSP1_IRQn);
#endif
#if defined(LPC43XX_M0)
#if LPC_SPI_USE_SSP0
/* Disable only if other SSP is stopped. */
/* TODO: Won't work correctly if SSPs are split between cores! */
if(SPID1.state == SPI_STOP) {
#endif
nvicDisableVector(SSP0_OR_SSP1_IRQn);
#if LPC_SPI_USE_SSP1
}
#endif
#endif
}
#endif
peripheral_reset(&spip->resources->reset);
branch_clock_disable(&spip->resources->branch_peripheral);
branch_clock_disable(&spip->resources->branch_register_if);
base_clock_disable(&spip->resources->base);
}
}

14
firmware/chibios-portapack/os/hal/platforms/LPC43xx/spi_lld.h
View File

@ -220,6 +220,16 @@
/* Driver data structures and types. */
/*===========================================================================*/
/**
* @brief Structure used for SSP configuration.
*/
typedef struct {
base_clock_regs_t base;
branch_clock_regs_t branch_register_if;
branch_clock_regs_t branch_peripheral;
peripheral_reset_t reset;
} ssp_resources_t;
/**
* @brief Type of a structure representing an SPI driver.
*/
@ -296,6 +306,10 @@ struct SPIDriver {
* @brief Pointer to the SSP registers block.
*/
LPC_SSPx_Type *ssp;
/**
* @brief Pointer to the non-peripheral SSP resources.
*/
const ssp_resources_t * resources;
/**
* @brief Number of bytes yet to be received.
*/

6
firmware/chibios-portapack/os/hal/platforms/LPC43xx_M0/hal_lld.c
View File

@ -100,6 +100,9 @@ void systick_stop() {
*/
void hal_lld_init(void) {
/* Initialize timer 3 to serve as a cycle (PCLK) counter. */
LPC_CCU1->CLK_M4_TIMER3_CFG.AUTO = 1;
LPC_CCU1->CLK_M4_TIMER3_CFG.RUN = 1;
while(!LPC_CCU1->CLK_M4_TIMER3_STAT.RUN);
LPC_TIMER3->TCR = (1 << 1); /* CRST=1 */
LPC_TIMER3->TCR = 0; /* CRST=0 */
LPC_TIMER3->TC = 0;
@ -109,6 +112,9 @@ void hal_lld_init(void) {
/* Initialize repetitive interrupt timer (RIT) to act like SysTick for
* operating system process timing.
*/
LPC_CCU1->CLK_M4_RITIMER_CFG.AUTO = 1;
LPC_CCU1->CLK_M4_RITIMER_CFG.RUN = 1;
while(!LPC_CCU1->CLK_M4_RITIMER_STAT.RUN);
LPC_RITIMER->CTRL =
(1 << 0) /* RITINT */
| (1 << 1) /* RITENCLR */

1
firmware/chibios-portapack/os/hal/platforms/LPC43xx_M0/lpc43xx_m0.h
View File

@ -101,6 +101,7 @@ typedef enum IRQn {
#include "core_cm0.h" /* Cortex-M0 processor and core peripherals */
#include "lpc43xx.inc"
#include "lpc43xx.h"
#endif /* __LPC43XX_M0_H */

1
firmware/chibios-portapack/os/hal/platforms/LPC43xx_M0/platform.cmake
View File

@ -8,6 +8,7 @@ set(PLATFORMSRC
${CHIBIOS_PORTAPACK}/os/hal/platforms/LPC43xx/sdc_lld.c
${CHIBIOS_PORTAPACK}/os/hal/platforms/LPC43xx/serial_lld.c
${CHIBIOS_PORTAPACK}/os/hal/platforms/LPC43xx/spi_lld.c
${CHIBIOS_PORTAPACK}/os/hal/platforms/LPC43xx/lpc43xx.c
)
# Required include directories

3
firmware/chibios-portapack/os/hal/platforms/LPC43xx_M0/platform.mk
View File

@ -6,7 +6,8 @@ PLATFORMSRC = ${CHIBIOS_PORTAPACK}/os/hal/platforms/LPC43xx_M0/hal_lld.c \
${CHIBIOS_PORTAPACK}/os/hal/platforms/LPC43xx/rtc_lld.c \
${CHIBIOS_PORTAPACK}/os/hal/platforms/LPC43xx/sdc_lld.c \
${CHIBIOS_PORTAPACK}/os/hal/platforms/LPC43xx/serial_lld.c \
${CHIBIOS_PORTAPACK}/os/hal/platforms/LPC43xx/spi_lld.c
${CHIBIOS_PORTAPACK}/os/hal/platforms/LPC43xx/spi_lld.c \
${CHIBIOS_PORTAPACK}/os/hal/platforms/LPC43xx/lpc43xx.c
# Required include directories
PLATFORMINC = ${CHIBIOS_PORTAPACK}/os/hal/platforms/LPC43xx_M0 \

1
firmware/chibios-portapack/os/hal/platforms/LPC43xx_M4/lpc43xx_m4.h
View File

@ -122,6 +122,7 @@ typedef enum IRQn {
#include "core_cm4.h" /* Cortex-M4 processor and core peripherals */
#include "lpc43xx.inc"
#include "lpc43xx.h"
#ifdef __cplusplus

1
firmware/chibios-portapack/os/hal/platforms/LPC43xx_M4/platform.cmake
View File

@ -8,6 +8,7 @@ set(PLATFORMSRC
${CHIBIOS_PORTAPACK}/os/hal/platforms/LPC43xx/sdc_lld.c
${CHIBIOS_PORTAPACK}/os/hal/platforms/LPC43xx/serial_lld.c
${CHIBIOS_PORTAPACK}/os/hal/platforms/LPC43xx/spi_lld.c
${CHIBIOS_PORTAPACK}/os/hal/platforms/LPC43xx/lpc43xx.c
)
# Required include directories

3
firmware/chibios-portapack/os/hal/platforms/LPC43xx_M4/platform.mk
View File

@ -6,7 +6,8 @@ PLATFORMSRC = ${CHIBIOS_PORTAPACK}/os/hal/platforms/LPC43xx_M4/hal_lld.c \
${CHIBIOS_PORTAPACK}/os/hal/platforms/LPC43xx/rtc_lld.c \
${CHIBIOS_PORTAPACK}/os/hal/platforms/LPC43xx/sdc_lld.c \
${CHIBIOS_PORTAPACK}/os/hal/platforms/LPC43xx/serial_lld.c \
${CHIBIOS_PORTAPACK}/os/hal/platforms/LPC43xx/spi_lld.c
${CHIBIOS_PORTAPACK}/os/hal/platforms/LPC43xx/spi_lld.c \
${CHIBIOS_PORTAPACK}/os/hal/platforms/LPC43xx/lpc43xx.c
# Required include directories
PLATFORMINC = ${CHIBIOS_PORTAPACK}/os/hal/platforms/LPC43xx_M4 \

76
firmware/common/cpld_max5.cpp
View File

@ -29,22 +29,32 @@
namespace cpld {
namespace max5 {
/* Enter ISP:
* Ensures that the I/O pins transition smoothly from user mode to ISP
* mode.
*/
void CPLD::enter_isp() {
/* Enter ISP */
shift_ir(0x2cc); //(199);
void CPLD::bypass() {
shift_ir(instruction_t::BYPASS);
jtag.runtest_tck(18003);
}
void CPLD::sample() {
shift_ir(instruction_t::SAMPLE);
jtag.runtest_tck(93);
for(size_t i=0; i<80; i++) {
jtag.shift_dr(3, 0b111);
}
}
void CPLD::clamp() {
shift_ir(instruction_t::CLAMP);
jtag.runtest_tck(93);
}
void CPLD::enable() {
shift_ir(instruction_t::ISC_ENABLE);
jtag.runtest_tck(18003); // 1ms
}
void CPLD::exit_isp() {
/* Exit ISP? Reset? */
shift_ir(0x201); //166);
void CPLD::disable() {
shift_ir(instruction_t::ISC_DISABLE);
jtag.runtest_tck(18003); // 1ms
shift_ir(0x3FF);
jtag.runtest_tck(18000); // 1ms
}
/* Sector erase:
@ -86,7 +96,7 @@ bool CPLD::program(
* one bit changing, a write must be a multiple of a particular
* length (64 bits)? */
sector_select(0x0000);
shift_ir(0x2F4); // Program
shift_ir(instruction_t::ISC_PROGRAM);
jtag.runtest_tck(93); // 5 us
/* TODO: Use data from cpld_block_0, with appropriate bit(s) changed */
@ -122,20 +132,20 @@ uint32_t CPLD::crc() {
}
void CPLD::sector_select(const uint16_t id) {
shift_ir(0x203); // Sector select
shift_ir(instruction_t::ISC_ADDRESS_SHIFT);
jtag.runtest_tck(93); // 5us
jtag.shift_dr(13, id); // Sector ID
}
bool CPLD::idcode_ok() {
shift_ir(Instruction::IDCODE);
const auto idcode = jtag.shift_dr(32, 0);
return (idcode == IDCODE);
shift_ir(instruction_t::IDCODE);
const auto idcode_read = jtag.shift_dr(idcode_length, 0);
return (idcode_read == idcode);
}
std::array<uint16_t, 5> CPLD::read_silicon_id() {
sector_select(0x0089);
shift_ir(0x205);
shift_ir(instruction_t::ISC_READ);
jtag.runtest_tck(93); // 5us
std::array<uint16_t, 5> silicon_id;
@ -164,9 +174,15 @@ bool CPLD::silicon_id_ok() {
);
}
uint32_t CPLD::usercode() {
shift_ir(instruction_t::USERCODE);
jtag.runtest_tck(93); // 5us
return jtag.shift_dr(32, 0xffffffff);
}
void CPLD::erase_sector(const uint16_t id) {
sector_select(id);
shift_ir(0x2F2); // Erase pulse
shift_ir(instruction_t::ISC_ERASE);
jtag.runtest_tck(9000003); // 500ms
}
@ -176,7 +192,7 @@ void CPLD::program_block(
const size_t count
) {
sector_select(id);
shift_ir(0x2F4); // Program
shift_ir(instruction_t::ISC_PROGRAM);
jtag.runtest_tck(93); // 5us
for(size_t i=0; i<count; i++) {
@ -191,19 +207,19 @@ bool CPLD::verify_block(
const size_t count
) {
sector_select(id);
shift_ir(0x205); // Read
shift_ir(instruction_t::ISC_READ);
jtag.runtest_tck(93); // 5us
bool success = true;
for(size_t i=0; i<count; i++) {
const auto from_device = jtag.shift_dr(16, 0xffff);
if( (id == 0) && (i == 0) ) {
// Account for bit that indicates bitstream is valid.
if( (from_device & 0xfbff) != (data[i] & 0xfbff) ) {
success = false;
}
} else {
if( from_device != data[i] ) {
if( from_device != data[i] ) {
if( (id == 0) && (i == 0) ) {
// Account for bit that indicates bitstream is valid.
if( (from_device & 0xfbff) != (data[i] & 0xfbff) ) {
success = false;
}
} else {
success = false;
}
}
@ -213,7 +229,7 @@ bool CPLD::verify_block(
bool CPLD::is_blank_block(const uint16_t id, const size_t count) {
sector_select(id);
shift_ir(0x205); // Read
shift_ir(instruction_t::ISC_READ);
jtag.runtest_tck(93); // 5us
bool success = true;
@ -228,7 +244,7 @@ bool CPLD::is_blank_block(const uint16_t id, const size_t count) {
void CPLD::block_crc(const uint16_t id, const size_t count, crc_t& crc) {
sector_select(id);
shift_ir(0x205); // Read
shift_ir(instruction_t::ISC_READ);
jtag.runtest_tck(93); // 5us
for(size_t i=0; i<count; i++) {

70
firmware/common/cpld_max5.hpp
View File

@ -46,6 +46,10 @@ public:
{
}
void bypass();
void sample();
void clamp();
void reset() {
jtag.reset();
}
@ -56,7 +60,7 @@ public:
bool idcode_ok();
void enter_isp();
void enable();
/* Check ID:
* The silicon ID is checked before any Program or Verify process. The
@ -65,7 +69,9 @@ public:
*/
bool silicon_id_ok();
void exit_isp(); // I think that's what the code does...
uint32_t usercode();
void disable();
void bulk_erase();
@ -85,18 +91,39 @@ public:
std::pair<bool, uint8_t> boundary_scan();
enum class Instruction {
BYPASS = 0b1111111111,
EXTEST = 0b0000001111,
SAMPLE = 0b0000000101,
IDCODE = 0b0000000110,
USERCODE = 0b0000000111,
CLAMP = 0b0000001010,
HIGHZ = 0b0000001011
};
private:
using idcode_t = uint32_t;
static constexpr size_t idcode_length = 32;
static constexpr idcode_t idcode = 0b00000010000010100101000011011101;
static constexpr idcode_t idcode_mask = 0b11111111111111111111111111111111;
void shift_ir(const Instruction instruction) {
shift_ir(static_cast<uint32_t>(instruction));
static constexpr size_t ir_length = 10;
using ir_t = uint16_t;
enum class instruction_t : ir_t {
BYPASS = 0b1111111111, // 0x3ff
EXTEST = 0b0000001111, // 0x00f
SAMPLE = 0b0000000101, // 0x005
IDCODE = 0b0000000110, // 0x006
USERCODE = 0b0000000111, // 0x007
CLAMP = 0b0000001010, // 0x00a
HIGHZ = 0b0000001011, // 0x00b
ISC_ENABLE = 0b1011001100, // 0x2cc
ISC_DISABLE = 0b1000000001, // 0x201
ISC_PROGRAM = 0b1011110100, // 0x2f4
ISC_ERASE = 0b1011110010, // 0x2f2
ISC_ADDRESS_SHIFT = 0b1000000011, // 0x203
ISC_READ = 0b1000000101, // 0x205
ISC_NOOP = 0b1000010000, // 0x210
};
void shift_ir(const instruction_t instruction) {
shift_ir(static_cast<ir_t>(instruction));
}
void shift_ir(const uint32_t value) {
jtag.shift_ir(ir_length, value);
}
void shift_dr(std::bitset<240>& value) {
@ -105,7 +132,10 @@ public:
}
}
private:
uint32_t shift_dr(const size_t count, const uint32_t value) {
return jtag.shift_dr(count, value);
}
jtag::JTAG& jtag;
std::array<uint16_t, 5> read_silicon_id();
@ -146,18 +176,6 @@ private:
using crc_t = CRC<32, true, true>;
void block_crc(const uint16_t id, const size_t count, crc_t& crc);
const uint32_t IDCODE = 0b00000010000010100101000011011101;
const size_t IR_LENGTH = 10;
void shift_ir(const uint32_t value) {
jtag.shift_ir(IR_LENGTH, value);
}
uint32_t shift_dr(const size_t count, const uint32_t value) {
return jtag.shift_dr(count, value);
}
};
/*
class ModeISP {

16
firmware/common/cpld_update.cpp
View File

@ -54,11 +54,9 @@ bool update_if_necessary(
return false;
}
/* Enter ISP:
* Ensures that the I/O pins transition smoothly from user mode to ISP
* mode. All pins are tri-stated.
*/
cpld.enter_isp();
cpld.sample();
cpld.bypass();
cpld.enable();
/* If silicon ID doesn't match, there's a serious problem. Leave CPLD
* in passive state.
@ -79,7 +77,13 @@ bool update_if_necessary(
* passive (ISP) state.
*/
if( ok ) {
cpld.exit_isp();
cpld.disable();
cpld.bypass();
/* Initiate SRAM reload from flash we just programmed. */
cpld.sample();
cpld.clamp();
cpld.disable();
}
return ok;

12
firmware/common/debug.cpp
View File

@ -64,18 +64,6 @@ static void runtime_error() {
extern "C" {
void __early_init(void) {
/* Enable unaligned exception handler */
SCB_CCR |= (1 << 3);
#if defined(LPC43XX_M4)
/* Enable MemManage, BusFault, UsageFault exception handlers */
SCB_SHCSR |= (1 << 16);
SCB_SHCSR |= (1 << 17);
SCB_SHCSR |= (1 << 18);
#endif
}
void port_halt(void) {
// Copy debug panic message to M0 region.
const auto* p = dbg_panic_msg;

14
firmware/common/gpio.hpp
View File

@ -176,6 +176,18 @@ struct PinConfig {
static constexpr PinConfig i2c(const uint32_t mode) {
return { .mode = mode, .pd = 0, .pu = 0, .fast = 0, .input = 1, .ifilt = 1 };
}
static constexpr PinConfig spifi_sck(const uint32_t mode ) {
return { .mode = mode, .pd = 0, .pu = 0, .fast = 1, .input = 1, .ifilt = 0 };
}
static constexpr PinConfig spifi_inout(const uint32_t mode) {
return { .mode = mode, .pd = 0, .pu = 0, .fast = 1, .input = 1, .ifilt = 0 };
}
static constexpr PinConfig spifi_cs(const uint32_t mode) {
return { .mode = mode, .pd = 0, .pu = 0, .fast = 1, .input = 0, .ifilt = 0 };
}
};
struct Pin {
@ -207,7 +219,7 @@ struct Pin {
void mode(const uint_fast16_t mode) const {
LPC_SCU->SFSP[_pin_port][_pin_pad] =
(LPC_SCU->SFSP[_pin_port][_pin_pad] & ~(7U << 0)) | mode;
(LPC_SCU->SFSP[_pin_port][_pin_pad] & 0xfffffff8) | mode;
}
void configure(const PinConfig config) const {

3
firmware/common/hackrf_hal.cpp
View File

@ -71,8 +71,7 @@ void reset() {
/*| rgu::Reset::SPIFI*/
| rgu::Reset::CAN1
| rgu::Reset::CAN0
/* Don't reset M0 if that's the core we're running on! */
/*| rgu::Reset::M0APP */
| rgu::Reset::M0APP
| rgu::Reset::SGPIO
| rgu::Reset::SPI
);

10
firmware/common/i2c_pp.hpp
View File

@ -32,16 +32,6 @@ struct I2CClockConfig {
float bus_f;
float high_period_ns;
constexpr I2CClockConfig(
float clock_source_f,
float bus_f,
float high_period_ns
) : clock_source_f(clock_source_f),
bus_f(bus_f),
high_period_ns(high_period_ns)
{
}
static constexpr float period_ns(const float f) {
return 1e9 / f;
}

2
firmware/common/lpc43xx_cpp.hpp
View File

@ -356,7 +356,7 @@ enum class Status {
};
inline void reset(const Reset reset) {
LPC_RGU->RESET_CTRL[toUType(reset) >> 5] |= (1U << (toUType(reset) & 0x1f));
LPC_RGU->RESET_CTRL[toUType(reset) >> 5] = (1U << (toUType(reset) & 0x1f));
}
inline void reset_mask(const uint64_t mask) {

54
firmware/common/pins.hpp
View File

@ -30,7 +30,7 @@ enum Pins {
P0_0, P0_1,
P1_0, P1_1, P1_2, P1_3, P1_4, P1_5, P1_6, P1_7, P1_8, P1_9, P1_10, P1_11, P1_12, P1_13, P1_14, P1_15, P1_16, P1_17, P1_18, P1_19, P1_20,
P2_0, P2_1, P2_2, P2_3, P2_4, P2_5, P2_6, P2_7, P2_8, P2_9, P2_10, P2_11, P2_12, P2_13,
P3_0, P3_1, P3_2, /*P3_3, P3_4, P3_5, P3_6, P3_7, P3_8,*/
P3_0, P3_1, P3_2,
P4_0, P4_1, P4_2, P4_3, P4_4, P4_5, P4_6, P4_7, P4_8, P4_9, P4_10,
P5_0, P5_1, P5_2, P5_3, P5_4, P5_5, P5_6, P5_7,
P6_0, P6_1, P6_2, P6_3, P6_4, P6_5, P6_6, P6_7, P6_8, P6_9, P6_10, P6_11, P6_12,
@ -44,13 +44,13 @@ constexpr Pin pins[] = {
[P0_0] = { 0, 0, PinConfig::sgpio_inout_fast(3) }, /* SGPIO0/P75/BANK2F3M3: CPLD.89/HOST_DATA0(IO) */
[P0_1] = { 0, 1, PinConfig::sgpio_inout_fast(3) }, /* SGPIO1/BANK2F3M5: CPLD.79/HOST_DATA1(IO) */
[P1_0] = { 1, 0, PinConfig::sgpio_inout_fast(6) }, /* SGPIO7/P76/BANK2F3M7: CPLD.77/HOST_DATA7(IO) */
[P1_1] = { 1, 1, { .mode=0, .pd=0, .pu=0, .fast=0, .input=1, .ifilt=1 } }, /* P1_1/P74: 10K PU, BOOT0 */
[P1_2] = { 1, 2, { .mode=0, .pd=0, .pu=0, .fast=0, .input=1, .ifilt=1 } }, /* P1_2/P73: 10K PD, BOOT1 */
[P1_1] = { 1, 1, { .mode=0, .pd=0, .pu=0, .fast=0, .input=0, .ifilt=1 } }, /* P1_1/P74: 10K PU, BOOT0 */
[P1_2] = { 1, 2, { .mode=0, .pd=0, .pu=0, .fast=0, .input=0, .ifilt=1 } }, /* P1_2/P73: 10K PD, BOOT1 */
[P1_3] = { 1, 3, { .mode=5, .pd=0, .pu=0, .fast=0, .input=1, .ifilt=1 } }, /* SSP1_MISO/P41: MAX2837.DOUT(O) */
[P1_4] = { 1, 4, { .mode=5, .pd=1, .pu=0, .fast=0, .input=0, .ifilt=1 } }, /* SSP1_MOSI/P40: MAX2837.DIN(I), MAX5864.DIN(I) */
[P1_5] = { 1, 5, { .mode=0, .pd=0, .pu=1, .fast=0, .input=1, .ifilt=1 } }, /* SD_POW: PortaPack CPLD.TDO(O) */
[P1_6] = { 1, 6, { .mode=7, .pd=0, .pu=1, .fast=0, .input=1, .ifilt=0 } }, /* SD_CMD: PortaPack SD.CMD(IO) */
[P1_7] = { 1, 7, { .mode=0, .pd=1, .pu=0, .fast=0, .input=0, .ifilt=1 } }, /* !MIX_BYPASS/P35: U1.VCTL1(I), U11.VCTL2(I), U9.V2(I) */
[P1_7] = { 1, 7, { .mode=0, .pd=0, .pu=0, .fast=0, .input=0, .ifilt=1 } }, /* !MIX_BYPASS/P35: U1.VCTL1(I), U11.VCTL2(I), U9.V2(I) */
[P1_8] = { 1, 8, { .mode=0, .pd=0, .pu=1, .fast=0, .input=0, .ifilt=1 } }, /* SD_VOLT0: PortaPack CPLD.TMS(I) */
[P1_9] = { 1, 9, { .mode=7, .pd=0, .pu=1, .fast=0, .input=1, .ifilt=0 } }, /* SD_DAT0: PortaPack SD.DAT0(IO) */
[P1_10] = { 1, 10, { .mode=7, .pd=0, .pu=1, .fast=0, .input=1, .ifilt=0 } }, /* SD_DAT1: PortaPack SD.DAT1(IO) */
@ -62,8 +62,8 @@ constexpr Pin pins[] = {
[P1_16] = { 1, 16, PinConfig::sgpio_inout_fast(2) }, /* SGPIO3/BANK2F3M10: CPLD.72/HOST_DATA3(IO) */
[P1_17] = { 1, 17, PinConfig::sgpio_out_fast_with_pullup(6) }, /* SGPIO11/P79/BANK2F3M11: CPLD.71/HOST_DIRECTION(I) */
[P1_18] = { 1, 18, PinConfig::gpio_out_with_pulldown(0) }, /* SGPIO12/BANK2F3M12: CPLD.70/HOST_INVERT(I) */
[P1_19] = { 1, 19, { .mode=1, .pd=1, .pu=0, .fast=0, .input=0, .ifilt=1 } }, /* SSP1_SCK/P39: MAX2837.SCLK(I), MAX5864.SCLK(I) */
[P1_20] = { 1, 20, { .mode=0, .pd=0, .pu=1, .fast=0, .input=0, .ifilt=1 } }, /* CS_XCVR/P53: MAX2837.CS(I) */
[P1_19] = { 1, 19, { .mode=1, .pd=0, .pu=0, .fast=0, .input=0, .ifilt=1 } }, /* SSP1_SCK/P39: MAX2837.SCLK(I), MAX5864.SCLK(I) */
[P1_20] = { 1, 20, { .mode=0, .pd=0, .pu=0, .fast=0, .input=0, .ifilt=1 } }, /* CS_XCVR/P53: MAX2837.CS(I) */
[P2_0] = { 2, 0, { .mode=4, .pd=0, .pu=0, .fast=0, .input=1, .ifilt=1 } }, /* U0_TXD: PortaPack P2_0/IO_STBX */
[P2_1] = { 2, 1, { .mode=4, .pd=0, .pu=0, .fast=0, .input=1, .ifilt=1 } }, /* U0_RXD: PortaPack P2_1/ADDR */
[P2_2] = { 2, 2, PinConfig::sgpio_inout_fast(0) }, /* SGPIO6/BANK2F3M16: CPLD.61/HOST_DATA6(IO) */
@ -71,53 +71,47 @@ constexpr Pin pins[] = {
[P2_4] = { 2, 4, { .mode=4, .pd=0, .pu=0, .fast=0, .input=1, .ifilt=1 } }, /* I2C1_SCL: PortaPack P2_4/LCD_RDX */
[P2_5] = { 2, 5, { .mode=4, .pd=0, .pu=1, .fast=0, .input=0, .ifilt=1 } }, /* RX/P43: U7.VCTL1(I), U10.VCTL1(I), U2.VCTL1(I) */
[P2_6] = { 2, 6, { .mode=4, .pd=0, .pu=0, .fast=0, .input=0, .ifilt=1 } }, /* MIXER_SCLK/P31: 33pF, RFFC5072.SCLK(I) */
[P2_7] = { 2, 7, { .mode=0, .pd=0, .pu=0, .fast=0, .input=1, .ifilt=1 } }, /* ISP: 10K PU, Unused */
[P2_7] = { 2, 7, { .mode=0, .pd=0, .pu=0, .fast=0, .input=0, .ifilt=1 } }, /* ISP: 10K PU, Unused */
[P2_8] = { 2, 8, { .mode=4, .pd=0, .pu=0, .fast=0, .input=0, .ifilt=1 } }, /* P2_8: 10K PD, BOOT2, DFU switch, PortaPack P2_8/<unused> */
[P2_9] = { 2, 9, { .mode=0, .pd=0, .pu=0, .fast=0, .input=1, .ifilt=1 } }, /* P2_9: 10K PD, BOOT3, PortaPack P2_9/LCD_WRX */
[P2_10] = { 2, 10, { .mode=0, .pd=0, .pu=1, .fast=0, .input=0, .ifilt=1 } }, /* AMP_BYPASS/P50: U14.V2(I), U12.V2(I) */
[P2_11] = { 2, 11, { .mode=0, .pd=1, .pu=0, .fast=0, .input=0, .ifilt=1 } }, /* RX_AMP/P49: U12.V1(I), U14.V3(I) */
[P2_10] = { 2, 10, { .mode=0, .pd=0, .pu=0, .fast=0, .input=0, .ifilt=1 } }, /* AMP_BYPASS/P50: U14.V2(I), U12.V2(I) */
[P2_11] = { 2, 11, { .mode=0, .pd=0, .pu=0, .fast=0, .input=0, .ifilt=1 } }, /* RX_AMP/P49: U12.V1(I), U14.V3(I) */
[P2_12] = { 2, 12, { .mode=0, .pd=0, .pu=0, .fast=0, .input=0, .ifilt=1 } }, /* !RX_AMP_PWR/P52: 10K PU, Q1.G(I), power to U13 (RX amp) */
[P2_13] = { 2, 13, { .mode=0, .pd=0, .pu=0, .fast=0, .input=1, .ifilt=1 } }, /* P2_13: PortaPack P2_13/DIR */
[P3_0] = { 3, 0, { .mode=2, .pd=0, .pu=1, .fast=0, .input=1, .ifilt=1 } }, /* I2S0_TX_SCK: PortaPack I2S0_TX_SCK(I) */
[P3_1] = { 3, 1, { .mode=0, .pd=0, .pu=1, .fast=0, .input=1, .ifilt=1 } }, /* I2S0_RX_WS: PortaPack I2S0_TX_WS(I). Input enabled to fold back into RX. */
[P3_2] = { 3, 2, { .mode=0, .pd=0, .pu=1, .fast=0, .input=0, .ifilt=1 } }, /* I2S0_RX_SDA: PortaPack I2S0_TX_SDA(I) */
//[P3_3] = { 3, 3, { .mode=3, .pd=1, .pu=0, .fast=1, .input=1, .ifilt=0 } }, /* SPIFI_SCK: W25Q80BV.CLK(I), enable input buffer for timing feedback */
//[P3_4] = { 3, 4, { .mode=3, .pd=0, .pu=1, .fast=1, .input=1, .ifilt=0 } }, /* SPIFI_SIO3/P82: W25Q80BV.HOLD(IO) */
//[P3_5] = { 3, 5, { .mode=3, .pd=0, .pu=1, .fast=1, .input=1, .ifilt=0 } }, /* SPIFI_SIO2/P81: W25Q80BV.WP(IO) */
//[P3_6] = { 3, 6, { .mode=3, .pd=0, .pu=1, .fast=1, .input=1, .ifilt=0 } }, /* SPIFI_MISO: W25Q80BV.DO(IO) */
//[P3_7] = { 3, 7, { .mode=3, .pd=0, .pu=1, .fast=1, .input=1, .ifilt=0 } }, /* SPIFI_MOSI: W25Q80BV.DI(IO) */
//[P3_8] = { 3, 8, { .mode=3, .pd=0, .pu=1, .fast=1, .input=0, .ifilt=1 } }, /* SPIFI_CS/P68: W25Q80BV.CS(I) */
[P4_0] = { 4, 0, { .mode=0, .pd=1, .pu=0, .fast=0, .input=0, .ifilt=1 } }, /* HP/P44: U6.VCTL1(I), U5.VCTL2(I) */
[P4_0] = { 4, 0, { .mode=0, .pd=0, .pu=0, .fast=0, .input=0, .ifilt=1 } }, /* HP/P44: U6.VCTL1(I), U5.VCTL2(I) */
[P4_1] = { 4, 1, PinConfig::gpio_led(0) }, /* LED1: LED1.A(I) */
[P4_2] = { 4, 2, PinConfig::gpio_led(0) }, /* LED2: LED2.A(I) */
[P4_3] = { 4, 3, PinConfig::sgpio_in_fast(7) }, /* SGPIO9/P77/BANK2F3M1: CPLD.91/HOST_CAPTURE(O) */
[P4_4] = { 4, 4, { .mode=0, .pd=1, .pu=0, .fast=0, .input=0, .ifilt=1 } }, /* TXENABLE/P55: MAX2837.TXENABLE(I) */
[P4_5] = { 4, 5, { .mode=0, .pd=1, .pu=0, .fast=0, .input=0, .ifilt=1 } }, /* RXENABLE/P56: MAX2837.RXENABLE(I) */
[P4_4] = { 4, 4, { .mode=0, .pd=0, .pu=0, .fast=0, .input=0, .ifilt=1 } }, /* TXENABLE/P55: MAX2837.TXENABLE(I) */
[P4_5] = { 4, 5, { .mode=0, .pd=0, .pu=0, .fast=0, .input=0, .ifilt=1 } }, /* RXENABLE/P56: MAX2837.RXENABLE(I) */
[P4_6] = { 4, 6, { .mode=0, .pd=0, .pu=0, .fast=0, .input=0, .ifilt=1 } }, /* XCVR_EN: 10K PD, MAX2837.ENABLE(I) */
[P4_7] = { 4, 7, { .mode=1, .pd=0, .pu=0, .fast=0, .input=1, .ifilt=0 } }, /* GP_CLKIN/P72/MCU_CLK: SI5351C.CLK7(O) */
[P4_8] = { 4, 8, PinConfig::gpio_out_with_pullup(4) }, /* SGPIO13/BANK2F3M2: CPLD.90/HOST_DECIM_SEL0(I) */
[P4_9] = { 4, 9, PinConfig::gpio_out_with_pullup(4) }, /* SGPIO14/BANK2F3M4: CPLD.81/HOST_DECIM_SEL1(I) */
[P4_10] = { 4, 10, PinConfig::gpio_out_with_pullup(4) }, /* SGPIO15/BANK2F3M6: CPLD.78/HOST_DECIM_SEL2(I) */
[P5_0] = { 5, 0, { .mode=0, .pd=0, .pu=0, .fast=0, .input=0, .ifilt=1 } }, /* !VAA_ENABLE: 10K PU, Q3.G(I), power to VAA */
[P5_1] = { 5, 1, { .mode=0, .pd=1, .pu=0, .fast=0, .input=0, .ifilt=1 } }, /* LP/P45: U6.VCTL2(I), U5.VCTL1(I) */
[P5_2] = { 5, 2, { .mode=0, .pd=1, .pu=0, .fast=0, .input=0, .ifilt=1 } }, /* TX_MIX_BP/P46: U9.V1(I) */
[P5_3] = { 5, 3, { .mode=0, .pd=0, .pu=1, .fast=0, .input=0, .ifilt=1 } }, /* RX_MIX_BP/P47: U9.V3(I) */
[P5_1] = { 5, 1, { .mode=0, .pd=0, .pu=0, .fast=0, .input=0, .ifilt=1 } }, /* LP/P45: U6.VCTL2(I), U5.VCTL1(I) */
[P5_2] = { 5, 2, { .mode=0, .pd=0, .pu=0, .fast=0, .input=0, .ifilt=1 } }, /* TX_MIX_BP/P46: U9.V1(I) */
[P5_3] = { 5, 3, { .mode=0, .pd=0, .pu=0, .fast=0, .input=0, .ifilt=1 } }, /* RX_MIX_BP/P47: U9.V3(I) */
[P5_4] = { 5, 4, { .mode=0, .pd=0, .pu=0, .fast=0, .input=0, .ifilt=1 } }, /* MIXER_ENX/P32: 10K PU, 33pF, RFFC5072.ENX(I) */
[P5_5] = { 5, 5, { .mode=0, .pd=0, .pu=0, .fast=0, .input=0, .ifilt=1 } }, /* MIXER_RESETX/P33: 10K PU, 33pF, RFFC5072.RESETX(I) */
[P5_6] = { 5, 6, { .mode=0, .pd=1, .pu=0, .fast=0, .input=0, .ifilt=1 } }, /* TX_AMP/P48: U12.V3(I), U14.V1(I) */
[P5_7] = { 5, 7, { .mode=0, .pd=0, .pu=1, .fast=0, .input=0, .ifilt=1 } }, /* CS_AD/P54: MAX5864.CS(I) */
[P5_6] = { 5, 6, { .mode=0, .pd=0, .pu=0, .fast=0, .input=0, .ifilt=1 } }, /* TX_AMP/P48: U12.V3(I), U14.V1(I) */
[P5_7] = { 5, 7, { .mode=0, .pd=0, .pu=0, .fast=0, .input=0, .ifilt=1 } }, /* CS_AD/P54: MAX5864.CS(I) */
[P6_0] = { 6, 0, { .mode=0, .pd=0, .pu=1, .fast=0, .input=0, .ifilt=1 } }, /* I2S0_RX_MCLK: Unused */
[P6_1] = { 6, 1, { .mode=0, .pd=1, .pu=0, .fast=0, .input=0, .ifilt=1 } }, /* CPLD_TCK: CPLD.TCK(I), PortaPack CPLD.TCK(I) */
[P6_2] = { 6, 2, { .mode=0, .pd=0, .pu=1, .fast=0, .input=1, .ifilt=1 } }, /* CPLD_TDI: CPLD.TDI(I), PortaPack I2S0_RX_SDA(O), PortaPack CPLD.TDI(I) */
[P6_1] = { 6, 1, { .mode=0, .pd=0, .pu=0, .fast=0, .input=0, .ifilt=1 } }, /* CPLD_TCK: CPLD.TCK(I), PortaPack CPLD.TCK(I) */
[P6_2] = { 6, 2, { .mode=0, .pd=0, .pu=0, .fast=0, .input=1, .ifilt=1 } }, /* CPLD_TDI: CPLD.TDI(I), PortaPack I2S0_RX_SDA(O), PortaPack CPLD.TDI(I) */
[P6_3] = { 6, 3, PinConfig::sgpio_inout_fast(2) }, /* SGPIO4/BANK2F3M14: CPLD.67/HOST_DATA4(IO) */
[P6_4] = { 6, 4, { .mode=0, .pd=0, .pu=0, .fast=0, .input=1, .ifilt=1 } }, /* MIXER_SDATA/P27: 33pF, RFFC5072.SDATA(IO) */
[P6_5] = { 6, 5, { .mode=0, .pd=0, .pu=1, .fast=0, .input=0, .ifilt=1 } }, /* CPLD_TMS: CPLD.TMS(I) */
[P6_5] = { 6, 5, { .mode=0, .pd=0, .pu=0, .fast=0, .input=0, .ifilt=1 } }, /* CPLD_TMS: CPLD.TMS(I) */
[P6_6] = { 6, 6, PinConfig::sgpio_inout_fast(2) }, /* SGPIO5/BANK2F3M15: CPLD.64/HOST_DATA5(IO) */
[P6_7] = { 6, 7, { .mode=4, .pd=1, .pu=0, .fast=0, .input=0, .ifilt=1 } }, /* TX/P42: U7.VCTL2(I), U10.VCTL2(I), U2.VCTL2(I) */
[P6_8] = { 6, 8, { .mode=4, .pd=0, .pu=1, .fast=0, .input=0, .ifilt=1 } }, /* MIX_BYPASS/P34: U1.VCTL2(I), U11.VCTL1(I) */
[P6_7] = { 6, 7, { .mode=4, .pd=0, .pu=0, .fast=0, .input=0, .ifilt=1 } }, /* TX/P42: U7.VCTL2(I), U10.VCTL2(I), U2.VCTL2(I) */
[P6_8] = { 6, 8, { .mode=4, .pd=0, .pu=0, .fast=0, .input=0, .ifilt=1 } }, /* MIX_BYPASS/P34: U1.VCTL2(I), U11.VCTL1(I) */
[P6_9] = { 6, 9, { .mode=0, .pd=0, .pu=0, .fast=0, .input=0, .ifilt=1 } }, /* !TX_AMP_PWR/P51: 10K PU, Q2.G(I), power to U25 (TX amp) */
[P6_10] = { 6, 10, { .mode=0, .pd=0, .pu=0, .fast=0, .input=0, .ifilt=1 } }, /* EN1V8/P70: 10K PD, TPS62410.EN2(I), 1V8LED.A(I) */
[P6_11] = { 6, 11, { .mode=0, .pd=1, .pu=0, .fast=0, .input=0, .ifilt=1 } }, /* VREGMODE/P69: TPS62410.MODE/DATA(I) */
[P6_11] = { 6, 11, { .mode=0, .pd=0, .pu=0, .fast=0, .input=0, .ifilt=1 } }, /* VREGMODE/P69: TPS62410.MODE/DATA(I) */
[P6_12] = { 6, 12, PinConfig::gpio_led(0) }, /* LED3: LED3.A(I) */
[P7_0] = { 7, 0, PinConfig::gpio_inout_with_pulldown(0) }, /* GPIO3_8: PortaPack GPIO3_8(IO) */
[P7_1] = { 7, 1, PinConfig::gpio_inout_with_pulldown(0) }, /* GPIO3_9: PortaPack GPIO3_9(IO) */
@ -127,7 +121,7 @@ constexpr Pin pins[] = {
[P7_5] = { 7, 5, PinConfig::gpio_inout_with_pulldown(0) }, /* GPIO3_13: PortaPack GPIO3_13(IO) */
[P7_6] = { 7, 6, PinConfig::gpio_inout_with_pulldown(0) }, /* GPIO3_14: PortaPack GPIO3_14(IO) */
[P7_7] = { 7, 7, PinConfig::gpio_inout_with_pulldown(0) }, /* GPIO3_15: PortaPack GPIO3_15(IO) */
[P9_5] = { 9, 5, { .mode=3, .pd=0, .pu=1, .fast=0, .input=1, .ifilt=1 } }, /* CPLD_TDO: CPLD.TDO(O) */
[P9_5] = { 9, 5, { .mode=4, .pd=0, .pu=0, .fast=0, .input=1, .ifilt=1 } }, /* CPLD_TDO: CPLD.TDO(O) */
[P9_6] = { 9, 6, PinConfig::sgpio_in_fast(6) }, /* SGPIO8/SGPIO_CLK/P60: SI5351C.CLK2(O) */
[PF_4] = { 15, 4, { .mode=7, .pd=0, .pu=1, .fast=0, .input=0, .ifilt=1 } }, /* I2S0_RX_SCK: Unused */
[CLK0] = { 24, 0, { .mode=4, .pd=1, .pu=0, .fast=0, .input=1, .ifilt=0 } }, /* SD_CLK: PortaPack SD.CLK, enable input buffer for timing feedback? */

6
firmware/common/portapack_io.cpp
View File

@ -69,6 +69,12 @@ void IO::audio_reset_state(const bool active) {
io_write(1, io_reg);
}
void IO::reference_oscillator(const bool enable) {
const uint8_t mask = 1 << 6;
io_reg = (io_reg & ~mask) | (enable ? mask : 0);
io_write(1, io_reg);
}
uint32_t IO::io_update(const TouchPinsConfig write_value) {
/* Very touchy code to save context of PortaPack data bus while the
* resistive touch pin drive is changed. Order of operations is

1
firmware/common/portapack_io.hpp
View File

@ -101,6 +101,7 @@ public:
void lcd_backlight(const bool value);
void lcd_reset_state(const bool active);
void audio_reset_state(const bool active);
void reference_oscillator(const bool enable);
void lcd_data_write_command_and_data(
const uint_fast8_t command,

13
firmware/common/spi_image.hpp
View File

@ -114,19 +114,14 @@ struct region_t {
}
};
constexpr region_t bootstrap {
.offset = 0x00000,
.size = 0x10000,
};
constexpr region_t images {
.offset = 0x10000,
.size = 0x70000,
.offset = 0x80000,
.size = 0x80000,
};
constexpr region_t application {
.offset = 0x80000,
.size = 0x50000,
.offset = 0x00000,
.size = 0x80000,
};
} /* namespace spi_flash */

BIN
firmware/hackrf_one_usb.dfu
View File

Binary file not shown.

22
firmware/tools/make_spi_image.py
View File

@ -26,7 +26,7 @@ import sys
usage_message = """
PortaPack SPI flash image generator
Usage: <command> <bootstrap_path> <baseband_path> <application_path> <output_path>
Usage: <command> <application_path> <baseband_path> <output_path>
Where paths refer to the .bin files for each component project.
"""
@ -41,33 +41,27 @@ def write_image(data, path):
f.write(data)
f.close()
if len(sys.argv) != 5:
if len(sys.argv) != 4:
print(usage_message)
sys.exit(-1)
bootstrap_image = read_image(sys.argv[1])
application_image = read_image(sys.argv[1])
baseband_image = read_image(sys.argv[2])
application_image = read_image(sys.argv[3])
output_path = sys.argv[4]
output_path = sys.argv[3]
spi_size = 1048576
images = (
{
'name': 'bootstrap',
'data': bootstrap_image,
'size': 0x10000,
'name': 'application',
'data': application_image,
'size': 0x80000, #len(application_image),
},
{
'name': 'baseband',
'data': baseband_image,
'size': 0x70000,
'size': 0x80000,
},
{
'name': 'application',
'data': application_image,
'size': len(application_image),
}
)
spi_image = bytearray()

338
hardware/portapack_h1/audio.sch
View File

@ -1,46 +1,26 @@
EESchema Schematic File Version 2
LIBS:portapack_h1-rescue
LIBS:hackrf_expansion
LIBS:passive
LIBS:supply
LIBS:trs_jack
LIBS:battery
LIBS:sd
LIBS:ck
LIBS:altera
LIBS:regulator
LIBS:tp
LIBS:header
LIBS:hole
LIBS:sharebrained
LIBS:fiducial
LIBS:eastrising
LIBS:on_semi
LIBS:asahi_kasei
LIBS:ti
LIBS:diode
EESchema Schematic File Version 4
LIBS:portapack_h1-cache
EELAYER 25 0
EELAYER 26 0
EELAYER END
$Descr A4 11693 8268
encoding utf-8
Sheet 2 5
Sheet 2 6
Title "PortaPack H1"
Date "2017-05-22"
Rev "20170522"
Date "2018-08-20"
Rev "20180820"
Comp "ShareBrained Technology, Inc."
Comment1 "Copyright © 2014-2017 Jared Boone"
Comment1 "Copyright © 2014-2018 Jared Boone"
Comment2 "License: GNU General Public License, version 2"
Comment3 ""
Comment4 ""
$EndDescr
$Comp
L R R11
L Device:R R11
U 1 1 53A8C264
P 6800 2400
F 0 "R11" V 6880 2400 50 0000 C CNN
F 1 "33R" V 6800 2400 50 0000 C CNN
F 2 "ipc_resc:IPC_RESC1608X55L25N" H 6800 2400 60 0001 C CNN
F 2 "ipc_resc:IPC_RESC160X80X55L25N" H 6800 2400 60 0001 C CNN
F 3 "" H 6800 2400 60 0000 C CNN
F 4 "Yageo" V 6800 2400 60 0001 C CNN "Mfr"
F 5 "RC0603FR-0733RL" V 6800 2400 60 0001 C CNN "Part"
@ -48,12 +28,12 @@ F 5 "RC0603FR-0733RL" V 6800 2400 60 0001 C CNN "Part"
-1 0 0 -1
$EndComp
$Comp
L R R12
L Device:R R12
U 1 1 53A8C26A
P 6400 2400
F 0 "R12" V 6480 2400 50 0000 C CNN
F 1 "33R" V 6400 2400 50 0000 C CNN
F 2 "ipc_resc:IPC_RESC1608X55L25N" H 6400 2400 60 0001 C CNN
F 2 "ipc_resc:IPC_RESC160X80X55L25N" H 6400 2400 60 0001 C CNN
F 3 "" H 6400 2400 60 0000 C CNN
F 4 "Yageo" V 6400 2400 60 0001 C CNN "Mfr"
F 5 "RC0603FR-0733RL" V 6400 2400 60 0001 C CNN "Part"
@ -61,7 +41,7 @@ F 5 "RC0603FR-0733RL" V 6400 2400 60 0001 C CNN "Part"
-1 0 0 -1
$EndComp
$Comp
L GND #PWR02
L power:GND #PWR02
U 1 1 53A8C270
P 6800 2750
F 0 "#PWR02" H 6800 2750 30 0001 C CNN
@ -72,7 +52,7 @@ F 3 "" H 6800 2750 60 0000 C CNN
1 0 0 -1
$EndComp
$Comp
L GND #PWR03
L power:GND #PWR03
U 1 1 53A8C276
P 6400 2750
F 0 "#PWR03" H 6400 2750 30 0001 C CNN
@ -87,12 +67,12 @@ LHPOUT
Text Label 7000 1500 0 60 ~ 0
RHPOUT
$Comp
L C C22
L Device:C C22
U 1 1 53A8C27E
P 6800 1850
F 0 "C22" H 6850 1950 50 0000 L CNN
F 1 "220N" H 6850 1750 50 0000 L CNN
F 2 "ipc_capc:IPC_CAPC1608X90L35N" H 6800 1850 60 0001 C CNN
F 2 "ipc_capc:IPC_CAPC160X80X90L35N" H 6800 1850 60 0001 C CNN
F 3 "" H 6800 1850 60 0000 C CNN
F 4 "Murata" H 6800 1850 60 0001 C CNN "Mfr"
F 5 "GRM188R71A224KA01D" H 6800 1850 60 0001 C CNN "Part"
@ -100,12 +80,12 @@ F 5 "GRM188R71A224KA01D" H 6800 1850 60 0001 C CNN "Part"
1 0 0 -1
$EndComp
$Comp
L C C23
L Device:C C23
U 1 1 53A8C284
P 6400 1850
F 0 "C23" H 6450 1950 50 0000 L CNN
F 1 "220N" H 6450 1750 50 0000 L CNN
F 2 "ipc_capc:IPC_CAPC1608X90L35N" H 6400 1850 60 0001 C CNN
F 2 "ipc_capc:IPC_CAPC160X80X90L35N" H 6400 1850 60 0001 C CNN
F 3 "" H 6400 1850 60 0000 C CNN
F 4 "Murata" H 6400 1850 60 0001 C CNN "Mfr"
F 5 "GRM188R71A224KA01D" H 6400 1850 60 0001 C CNN "Part"
@ -113,12 +93,12 @@ F 5 "GRM188R71A224KA01D" H 6400 1850 60 0001 C CNN "Part"
1 0 0 -1
$EndComp
$Comp
L R R18
L Device:R R18
U 1 1 53A8C29C
P 5000 5650
F 0 "R18" V 5080 5650 50 0000 C CNN
F 1 "2K2" V 5000 5650 50 0000 C CNN
F 2 "ipc_resc:IPC_RESC1608X55L25N" H 5000 5650 60 0001 C CNN
F 2 "ipc_resc:IPC_RESC160X80X55L25N" H 5000 5650 60 0001 C CNN
F 3 "" H 5000 5650 60 0000 C CNN
F 4 "Yageo" V 5000 5650 60 0001 C CNN "Mfr"
F 5 "RC0603FR-072K2L" V 5000 5650 60 0001 C CNN "Part"
@ -126,12 +106,12 @@ F 5 "RC0603FR-072K2L" V 5000 5650 60 0001 C CNN "Part"
-1 0 0 -1
$EndComp
$Comp
L C C25
L Device:C C25
U 1 1 53A8C2A2
P 4700 5600
F 0 "C25" H 4750 5700 50 0000 L CNN
F 1 "1U" H 4750 5500 50 0000 L CNN
F 2 "ipc_capc:IPC_CAPC1608X90L35N" H 4700 5600 60 0001 C CNN
F 2 "ipc_capc:IPC_CAPC160X80X90L35N" H 4700 5600 60 0001 C CNN
F 3 "" H 4700 5600 60 0000 C CNN
F 4 "Murata" H 4700 5600 60 0001 C CNN "Mfr"
F 5 "GRM188R61C105KA93D" H 4700 5600 60 0001 C CNN "Part"
@ -139,7 +119,7 @@ F 5 "GRM188R61C105KA93D" H 4700 5600 60 0001 C CNN "Part"
-1 0 0 -1
$EndComp
$Comp
L TRRS_SW_JACK P2
L trs_jack:TRRS_SW_JACK P2
U 1 1 53A8C2C6
P 10550 2100
F 0 "P2" H 10100 2100 60 0000 C CNN
@ -152,12 +132,12 @@ F 5 "SJ-43514-SMT" H 10550 2100 60 0001 C CNN "Part"
-1 0 0 -1
$EndComp
$Comp
L C C6
L Device:C C6
U 1 1 53A8C687
P 2800 3300
F 0 "C6" H 2850 3400 50 0000 L CNN
F 1 "2U2" H 2850 3200 50 0000 L CNN
F 2 "ipc_capc:IPC_CAPC1608X90L35N" H 2800 3300 60 0001 C CNN
F 2 "ipc_capc:IPC_CAPC160X80X90L35N" H 2800 3300 60 0001 C CNN
F 3 "" H 2800 3300 60 0000 C CNN
F 4 "Murata" H 2800 3300 60 0001 C CNN "Mfr"
F 5 "GRM188R61C225KE15D" H 2800 3300 60 0001 C CNN "Part"
@ -165,12 +145,12 @@ F 5 "GRM188R61C225KE15D" H 2800 3300 60 0001 C CNN "Part"
-1 0 0 -1
$EndComp
$Comp
L C C10
L Device:C C10
U 1 1 53A8C68D
P 3100 4000
F 0 "C10" H 3150 4100 50 0000 L CNN
F 1 "2U2" H 3150 3900 50 0000 L CNN
F 2 "ipc_capc:IPC_CAPC1608X90L35N" H 3100 4000 60 0001 C CNN
F 2 "ipc_capc:IPC_CAPC160X80X90L35N" H 3100 4000 60 0001 C CNN
F 3 "" H 3100 4000 60 0000 C CNN
F 4 "Murata" H 3100 4000 60 0001 C CNN "Mfr"
F 5 "GRM188R61C225KE15D" H 3100 4000 60 0001 C CNN "Part"
@ -178,12 +158,12 @@ F 5 "GRM188R61C225KE15D" H 3100 4000 60 0001 C CNN "Part"
0 -1 1 0
$EndComp
$Comp
L C C3
L Device:C C3
U 1 1 53A8C69F
P 2300 7200
F 0 "C3" H 2350 7300 50 0000 L CNN
F 1 "100N" H 2350 7100 50 0000 L CNN
F 2 "ipc_capc:IPC_CAPC1005X55L25N" H 2300 7200 60 0001 C CNN
F 2 "ipc_capc:IPC_CAPC100X50X55L25N" H 2300 7200 60 0001 C CNN
F 3 "" H 2300 7200 60 0000 C CNN
F 4 "Murata" H 2300 7200 60 0001 C CNN "Mfr"
F 5 "GRM155R61A104KA01" H 2300 7200 60 0001 C CNN "Part"
@ -191,12 +171,12 @@ F 5 "GRM155R61A104KA01" H 2300 7200 60 0001 C CNN "Part"
-1 0 0 -1
$EndComp
$Comp
L C C2
L Device:C C2
U 1 1 53A8C6A5
P 1200 7200
F 0 "C2" H 1250 7300 50 0000 L CNN
F 1 "100N" H 1250 7100 50 0000 L CNN
F 2 "ipc_capc:IPC_CAPC1005X55L25N" H 1200 7200 60 0001 C CNN
F 2 "ipc_capc:IPC_CAPC100X50X55L25N" H 1200 7200 60 0001 C CNN
F 3 "" H 1200 7200 60 0000 C CNN
F 4 "Murata" H 1200 7200 60 0001 C CNN "Mfr"
F 5 "GRM155R61A104KA01" H 1200 7200 60 0001 C CNN "Part"
@ -204,12 +184,12 @@ F 5 "GRM155R61A104KA01" H 1200 7200 60 0001 C CNN "Part"
-1 0 0 -1
$EndComp
$Comp
L C C5
L Device:C C5
U 1 1 53A8C6AB
P 4500 7200
F 0 "C5" H 4550 7300 50 0000 L CNN
F 1 "100N" H 4550 7100 50 0000 L CNN
F 2 "ipc_capc:IPC_CAPC1005X55L25N" H 4500 7200 60 0001 C CNN
F 2 "ipc_capc:IPC_CAPC100X50X55L25N" H 4500 7200 60 0001 C CNN
F 3 "" H 4500 7200 60 0000 C CNN
F 4 "Murata" H 4500 7200 60 0001 C CNN "Mfr"
F 5 "GRM155R61A104KA01" H 4500 7200 60 0001 C CNN "Part"
@ -217,12 +197,12 @@ F 5 "GRM155R61A104KA01" H 4500 7200 60 0001 C CNN "Part"
-1 0 0 -1
$EndComp
$Comp
L C C4
L Device:C C4
U 1 1 53A8C6B1
P 3400 7200
F 0 "C4" H 3450 7300 50 0000 L CNN
F 1 "100N" H 3450 7100 50 0000 L CNN
F 2 "ipc_capc:IPC_CAPC1005X55L25N" H 3400 7200 60 0001 C CNN
F 2 "ipc_capc:IPC_CAPC100X50X55L25N" H 3400 7200 60 0001 C CNN
F 3 "" H 3400 7200 60 0000 C CNN
F 4 "Murata" H 3400 7200 60 0001 C CNN "Mfr"
F 5 "GRM155R61A104KA01" H 3400 7200 60 0001 C CNN "Part"
@ -230,7 +210,7 @@ F 5 "GRM155R61A104KA01" H 3400 7200 60 0001 C CNN "Part"
-1 0 0 -1
$EndComp
$Comp
L GND #PWR04
L power:GND #PWR04
U 1 1 53A8C6B7
P 1200 7500
F 0 "#PWR04" H 1200 7500 30 0001 C CNN
@ -241,7 +221,7 @@ F 3 "" H 1200 7500 60 0000 C CNN
1 0 0 -1
$EndComp
$Comp
L GND #PWR05
L power:GND #PWR05
U 1 1 53A8C6BD
P 2300 7500
F 0 "#PWR05" H 2300 7500 30 0001 C CNN
@ -252,7 +232,7 @@ F 3 "" H 2300 7500 60 0000 C CNN
1 0 0 -1
$EndComp
$Comp
L GND #PWR06
L power:GND #PWR06
U 1 1 53A8C6C3
P 3400 7500
F 0 "#PWR06" H 3400 7500 30 0001 C CNN
@ -263,7 +243,7 @@ F 3 "" H 3400 7500 60 0000 C CNN
1 0 0 -1
$EndComp
$Comp
L GND #PWR07
L power:GND #PWR07
U 1 1 53A8C6E9
P 4500 7500
F 0 "#PWR07" H 4500 7500 30 0001 C CNN
@ -274,12 +254,12 @@ F 3 "" H 4500 7500 60 0000 C CNN
1 0 0 -1
$EndComp
$Comp
L C C12
L Device:C C12
U 1 1 53A8C6F0
P 3100 4300
F 0 "C12" H 3150 4400 50 0000 L CNN
F 1 "2U2" H 3150 4200 50 0000 L CNN
F 2 "ipc_capc:IPC_CAPC1608X90L35N" H 3100 4300 60 0001 C CNN
F 2 "ipc_capc:IPC_CAPC160X80X90L35N" H 3100 4300 60 0001 C CNN
F 3 "" H 3100 4300 60 0000 C CNN
F 4 "Murata" H 3100 4300 60 0001 C CNN "Mfr"
F 5 "GRM188R61C225KE15D" H 3100 4300 60 0001 C CNN "Part"
@ -287,12 +267,12 @@ F 5 "GRM188R61C225KE15D" H 3100 4300 60 0001 C CNN "Part"
0 -1 1 0
$EndComp
$Comp
L C C8
L Device:C C8
U 1 1 53A8C6F6
P 3900 3100
F 0 "C8" H 3950 3200 50 0000 L CNN
F 1 "2U2" H 3950 3000 50 0000 L CNN
F 2 "ipc_capc:IPC_CAPC1608X90L35N" H 3900 3100 60 0001 C CNN
F 2 "ipc_capc:IPC_CAPC160X80X90L35N" H 3900 3100 60 0001 C CNN
F 3 "" H 3900 3100 60 0000 C CNN
F 4 "Murata" H 3900 3100 60 0001 C CNN "Mfr"
F 5 "GRM188R61C225KE15D" H 3900 3100 60 0001 C CNN "Part"
@ -300,12 +280,12 @@ F 5 "GRM188R61C225KE15D" H 3900 3100 60 0001 C CNN "Part"
-1 0 0 -1
$EndComp
$Comp
L C C7
L Device:C C7
U 1 1 53A8C70E
P 1600 7200
F 0 "C7" H 1650 7300 50 0000 L CNN
F 1 "10U" H 1650 7100 50 0000 L CNN
F 2 "ipc_capc:IPC_CAPC2012X135L45N" H 1600 7200 60 0001 C CNN
F 2 "ipc_capc:IPC_CAPC200X125X135L45N" H 1600 7200 60 0001 C CNN
F 3 "" H 1600 7200 60 0000 C CNN
F 4 "Murata" H 1600 7200 60 0001 C CNN "Mfr"
F 5 "GRM21BR61A106KE19" H 1600 7200 60 0001 C CNN "Part"
@ -313,7 +293,7 @@ F 5 "GRM21BR61A106KE19" H 1600 7200 60 0001 C CNN "Part"
-1 0 0 -1
$EndComp
$Comp
L GND #PWR08
L power:GND #PWR08
U 1 1 53A8C714
P 4900 7500
F 0 "#PWR08" H 4900 7500 30 0001 C CNN
@ -324,7 +304,7 @@ F 3 "" H 4900 7500 60 0000 C CNN
1 0 0 -1
$EndComp
$Comp
L GND #PWR09
L power:GND #PWR09
U 1 1 53A8C71A
P 3800 7500
F 0 "#PWR09" H 3800 7500 30 0001 C CNN
@ -335,12 +315,12 @@ F 3 "" H 3800 7500 60 0000 C CNN
1 0 0 -1
$EndComp
$Comp
L C C13
L Device:C C13
U 1 1 53A8C720
P 4900 7200
F 0 "C13" H 4950 7300 50 0000 L CNN
F 1 "10U" H 4950 7100 50 0001 L CNN
F 2 "ipc_capc:IPC_CAPC2012X135L45N" H 4900 7200 60 0001 C CNN
F 2 "ipc_capc:IPC_CAPC200X125X135L45N" H 4900 7200 60 0001 C CNN
F 3 "" H 4900 7200 60 0000 C CNN
F 4 "Murata" H 4900 7200 60 0001 C CNN "Mfr"
F 5 "GRM21BR61A106KE19" H 4900 7200 60 0001 C CNN "Part"
@ -349,7 +329,7 @@ F 6 "DNP" H 5000 7100 50 0000 C CNN "DNP"
-1 0 0 -1
$EndComp
$Comp
L GND #PWR010
L power:GND #PWR010
U 1 1 53A8C726
P 1600 7500
F 0 "#PWR010" H 1600 7500 30 0001 C CNN
@ -360,12 +340,12 @@ F 3 "" H 1600 7500 60 0000 C CNN
1 0 0 -1
$EndComp
$Comp
L C C11
L Device:C C11
U 1 1 53A8C72C
P 3800 7200
F 0 "C11" H 3850 7300 50 0000 L CNN
F 1 "10U" H 3850 7100 50 0000 L CNN
F 2 "ipc_capc:IPC_CAPC2012X135L45N" H 3800 7200 60 0001 C CNN
F 2 "ipc_capc:IPC_CAPC200X125X135L45N" H 3800 7200 60 0001 C CNN
F 3 "" H 3800 7200 60 0000 C CNN
F 4 "Murata" H 3800 7200 60 0001 C CNN "Mfr"
F 5 "GRM21BR61A106KE19" H 3800 7200 60 0001 C CNN "Part"
@ -391,7 +371,7 @@ SDTI
Text HLabel 7200 3600 2 60 BiDi ~ 0
BICK
$Comp
L GND #PWR011
L power:GND #PWR011
U 1 1 58AF7E95
P 2700 3800
F 0 "#PWR011" H 2700 3800 30 0001 C CNN
@ -402,7 +382,7 @@ F 3 "" H 2700 3800 60 0000 C CNN
0 1 1 0
$EndComp
$Comp
L GND #PWR012
L power:GND #PWR012
U 1 1 58AF81BD
P 5200 2800
F 0 "#PWR012" H 5200 2800 30 0001 C CNN
@ -413,7 +393,7 @@ F 3 "" H 5200 2800 60 0000 C CNN
-1 0 0 1
$EndComp
$Comp
L GND #PWR013
L power:GND #PWR013
U 1 1 58AF82A8
P 3800 3400
F 0 "#PWR013" H 3800 3400 30 0001 C CNN
@ -424,7 +404,7 @@ F 3 "" H 3800 3400 60 0000 C CNN
0 1 1 0
$EndComp
$Comp
L AK4951EN U1
L asahi_kasei:AK4951EN U1
U 1 1 58CC98F8
P 4850 3750
F 0 "U1" V 4950 3750 60 0000 C CNN
@ -465,12 +445,12 @@ CN
Text HLabel 7200 3900 2 60 Input ~ 0
PDN#
$Comp
L R R2
L Device:R R2
U 1 1 58CF5E5F
P 5400 5050
F 0 "R2" V 5480 5050 50 0000 C CNN
F 1 "R" V 5400 5050 50 0001 C CNN
F 2 "ipc_resc:IPC_RESC1608X55L25N" H 5400 5050 60 0001 C CNN
F 1 "10K" V 5400 5050 50 0001 C CNN
F 2 "ipc_resc:IPC_RESC160X80X55L25N" H 5400 5050 60 0001 C CNN
F 3 "" H 5400 5050 60 0000 C CNN
F 4 "Yageo" V 5400 5050 60 0001 C CNN "Mfr"
F 5 "DNP" V 5400 5050 50 0000 C CNN "DNP"
@ -478,7 +458,7 @@ F 5 "DNP" V 5400 5050 50 0000 C CNN "DNP"
-1 0 0 -1
$EndComp
$Comp
L GND #PWR014
L power:GND #PWR014
U 1 1 58CF6206
P 5400 5400
F 0 "#PWR014" H 5400 5400 30 0001 C CNN
@ -495,7 +475,7 @@ Init: power down, EXT slave, PLL off\nBICK, LRCK: inputs
Text Notes 8800 6200 0 60 ~ 0
Input float OK: [LR]IN[123]
$Comp
L GND #PWR015
L power:GND #PWR015
U 1 1 58D2C845
P 3900 4300
F 0 "#PWR015" H 3900 4300 30 0001 C CNN
@ -506,7 +486,7 @@ F 3 "" H 3900 4300 60 0000 C CNN
0 1 1 0
$EndComp
$Comp
L NUF4220MN U5
L esd:NUF4220MN U5
U 1 1 58D9A047
P 9700 3250
F 0 "U5" H 9400 3550 60 0000 L CNN
@ -519,7 +499,7 @@ F 5 "NUF4220MNT1G" H 9700 3250 60 0001 C CNN "Part"
1 0 0 -1
$EndComp
$Comp
L GND #PWR016
L power:GND #PWR016
U 1 1 53A8C2CC
P 9700 3800
F 0 "#PWR016" H 9700 3800 30 0001 C CNN
@ -530,7 +510,7 @@ F 3 "" H 9700 3800 60 0000 C CNN
1 0 0 -1
$EndComp
$Comp
L GND #PWR017
L power:GND #PWR017
U 1 1 58D9A87F
P 9100 3200
F 0 "#PWR017" H 9100 3200 30 0001 C CNN
@ -565,7 +545,7 @@ RHPOUT
Text Label 8700 3300 0 60 ~ 0
MIC
$Comp
L TP TP1
L tp:TP TP1
U 1 1 58EDDA01
P 3700 4800
F 0 "TP1" H 3500 4800 60 0000 C CNN
@ -576,7 +556,7 @@ F 3 "" H 3700 4800 60 0001 C CNN
0 -1 -1 0
$EndComp
$Comp
L TP TP2
L tp:TP TP2
U 1 1 58EDDAEE
P 4500 4800
F 0 "TP2" H 4300 4800 60 0000 C CNN
@ -587,7 +567,7 @@ F 3 "" H 4500 4800 60 0001 C CNN
0 -1 -1 0
$EndComp
$Comp
L TP TP3
L tp:TP TP3
U 1 1 58EDDB69
P 4600 4800
F 0 "TP3" H 4400 4800 60 0000 C CNN
@ -598,7 +578,7 @@ F 3 "" H 4600 4800 60 0001 C CNN
0 -1 -1 0
$EndComp
$Comp
L TP TP4
L tp:TP TP4
U 1 1 58EDDC3F
P 4900 4800
F 0 "TP4" H 4700 4800 60 0000 C CNN
@ -609,7 +589,7 @@ F 3 "" H 4900 4800 60 0001 C CNN
0 -1 -1 0
$EndComp
$Comp
L TP TP5
L tp:TP TP5
U 1 1 58EDDCA8
P 5000 4800
F 0 "TP5" H 4800 4800 60 0000 C CNN
@ -620,7 +600,7 @@ F 3 "" H 5000 4800 60 0001 C CNN
0 -1 -1 0
$EndComp
$Comp
L TP TP6
L tp:TP TP6
U 1 1 58EDDD10
P 5100 4800
F 0 "TP6" H 4900 4800 60 0000 C CNN
@ -631,7 +611,7 @@ F 3 "" H 5100 4800 60 0001 C CNN
0 -1 -1 0
$EndComp
$Comp
L HEADER_1X3 J1
L header:HEADER_1X3 J1
U 1 1 58F82DA0
P 5800 2100
F 0 "J1" H 5800 1850 60 0000 C CNN
@ -645,7 +625,7 @@ F 6 "DNP" H 5800 2100 60 0000 C CNN "DNP"
1 0 0 1
$EndComp
$Comp
L GND #PWR018
L power:GND #PWR018
U 1 1 58F8315C
P 5400 2100
F 0 "#PWR018" H 5400 2100 30 0001 C CNN
@ -658,40 +638,16 @@ $EndComp
Wire Wire Line
9000 1900 10300 1900
Wire Wire Line
4600 1500 7600 1500
4600 1500 6400 1500
Wire Wire Line
4700 1600 7600 1600
Wire Wire Line
6400 2650 6400 2750
Wire Wire Line
6800 2750 6800 2650
Wire Wire Line
4500 7400 4500 7500
Wire Wire Line
3400 7400 3400 7500
Wire Wire Line
2300 7400 2300 7500
Wire Wire Line
1200 7400 1200 7500
Wire Wire Line
1600 7400 1600 7500
Wire Wire Line
3800 7400 3800 7500
Wire Wire Line
4900 7400 4900 7500
Wire Wire Line
6400 1500 6400 1650
4700 1600 6800 1600
Connection ~ 6400 1500
Wire Wire Line
6800 2150 6800 2050
Wire Wire Line
6400 2050 6400 2150
Wire Wire Line
5200 2900 5200 2800
Wire Wire Line
3800 3400 4000 3400
3800 3400 3900 3400
Wire Wire Line
2700 3800 4000 3800
2700 3800 2800 3800
Wire Wire Line
5700 3400 5800 3400
Wire Wire Line
@ -701,27 +657,13 @@ Wire Wire Line
Wire Wire Line
4800 2900 4800 2800
Wire Wire Line
1000 6900 1600 6900
Wire Wire Line
1200 6900 1200 7000
Wire Wire Line
1600 6900 1600 7000
1000 6900 1200 6900
Connection ~ 1200 6900
Wire Wire Line
2300 6900 2300 7000
Wire Wire Line
3200 6900 3800 6900
Wire Wire Line
3400 6900 3400 7000
Wire Wire Line
3800 6900 3800 7000
3200 6900 3400 6900
Connection ~ 3400 6900
Wire Wire Line
4300 6900 4900 6900
Wire Wire Line
4500 6900 4500 7000
Wire Wire Line
4900 6900 4900 7000
4300 6900 4500 6900
Connection ~ 4500 6900
Wire Wire Line
4500 2600 4500 2900
@ -733,12 +675,8 @@ Wire Wire Line
3100 3500 3100 3000
Wire Wire Line
3100 3000 2800 3000
Wire Wire Line
2800 3000 2800 3100
Wire Wire Line
2800 3600 4000 3600
Wire Wire Line
2800 3600 2800 3500
Wire Wire Line
5700 4000 5800 4000
Wire Wire Line
@ -760,25 +698,13 @@ Wire Wire Line
Wire Wire Line
5200 4600 5200 4700
Wire Wire Line
5200 4700 6600 4700
5200 4700 5400 4700
Wire Wire Line
4800 5300 4800 4600
Wire Wire Line
5000 5300 5000 5400
Wire Wire Line
4700 4600 4700 5400
Wire Wire Line
5000 5900 5000 6000
Wire Wire Line
5000 6000 4700 6000
Wire Wire Line
4700 5800 4700 6400
Connection ~ 4700 6000
Wire Wire Line
5400 4700 5400 4800
Connection ~ 5400 4700
Wire Wire Line
5400 5300 5400 5400
Wire Wire Line
4700 6400 5200 6400
Wire Wire Line
@ -793,8 +719,6 @@ Wire Wire Line
9000 2100 10300 2100
Wire Wire Line
5000 5300 4800 5300
Wire Wire Line
6800 1650 6800 1600
Connection ~ 6800 1600
Wire Wire Line
9000 2200 10100 2200
@ -828,32 +752,20 @@ Wire Wire Line
5100 4700 5100 4600
Wire Wire Line
3700 4100 4000 4100
Wire Wire Line
3900 3300 3900 3400
Connection ~ 3900 3400
Wire Wire Line
3900 2600 3900 2900
Wire Wire Line
3700 4100 3700 4700
Wire Wire Line
4000 4000 3500 4000
Wire Wire Line
3500 4000 3500 4300
Wire Wire Line
3500 4300 3300 4300
Wire Wire Line
4000 3900 3400 3900
Wire Wire Line
3400 3900 3400 4000
Wire Wire Line
3400 4000 3300 4000
Wire Wire Line
2900 4000 2800 4000
Wire Wire Line
2800 3800 2800 4300
2800 3800 2800 4000
Connection ~ 2800 3800
Wire Wire Line
2800 4300 2900 4300
Connection ~ 2800 4000
Wire Wire Line
5500 2000 4900 2000
@ -866,12 +778,12 @@ Wire Wire Line
Wire Wire Line
5500 2100 5400 2100
$Comp
L RPACK4 RP1
L passive:RPACK4 RP1
U 1 1 58F9564A
P 6900 3750
F 0 "RP1" H 6900 4000 60 0000 C CNN
F 1 "220R" H 6900 3500 60 0000 C CNN
F 2 "ipc_resc:IPC_RESCAXS8P80_320X160X60L30X45N" H 6900 3750 60 0001 C CNN
F 2 "ipc_rescax:IPC_RESCAXS8P80_320X160X60L30X45N" H 6900 3750 60 0001 C CNN
F 3 "https://industrial.panasonic.com/cdbs/www-data/pdf/AOC0000/AOC0000C14.pdf" H 6900 3750 60 0001 C CNN
F 4 "Panasonic" H 6900 3750 60 0001 C CNN "Mfr"
F 5 "EXB-38V221JV" H 6900 3750 60 0001 C CNN "Part"
@ -908,4 +820,92 @@ Text Notes 1800 7700 0 60 ~ 0
No 10U on DVDD, very near regulator 10U.
Text Notes 4250 7700 0 60 ~ 0
No 10U on SVDD to comply with USB inrush spec.
Wire Wire Line
6400 1500 7600 1500
Wire Wire Line
1200 6900 1600 6900
Wire Wire Line
3400 6900 3800 6900
Wire Wire Line
4500 6900 4900 6900
Wire Wire Line
4700 6000 4700 6400
Wire Wire Line
5400 4700 6600 4700
Wire Wire Line
6800 1600 7600 1600
Wire Wire Line
3900 3400 4000 3400
Wire Wire Line
2800 3800 4000 3800
Wire Wire Line
2800 4000 2800 4300
Wire Wire Line
3900 2600 3900 2950
Wire Wire Line
3900 3250 3900 3400
Wire Wire Line
2800 3000 2800 3150
Wire Wire Line
2800 3600 2800 3450
Wire Wire Line
2800 4000 2950 4000
Wire Wire Line
2800 4300 2950 4300
Wire Wire Line
3250 4300 3500 4300
Wire Wire Line
3250 4000 3400 4000
Wire Wire Line
4700 4600 4700 5450
Wire Wire Line
4700 5750 4700 6000
Wire Wire Line
5000 5300 5000 5500
Wire Wire Line
5000 5800 5000 6000
Wire Wire Line
5400 5200 5400 5400
Wire Wire Line
5400 4700 5400 4900
Wire Wire Line
6400 2550 6400 2750
Wire Wire Line
6400 2000 6400 2250
Wire Wire Line
6400 1500 6400 1700
Wire Wire Line
6800 1600 6800 1700
Wire Wire Line
6800 2000 6800 2250
Wire Wire Line
6800 2550 6800 2750
Wire Wire Line
1200 6900 1200 7050
Wire Wire Line
1200 7350 1200 7500
Wire Wire Line
1600 7350 1600 7500
Wire Wire Line
1600 6900 1600 7050
Wire Wire Line
2300 6900 2300 7050
Wire Wire Line
2300 7350 2300 7500
Wire Wire Line
3400 7350 3400 7500
Wire Wire Line
3400 6900 3400 7050
Wire Wire Line
3800 6900 3800 7050
Wire Wire Line
3800 7350 3800 7500
Wire Wire Line
4500 7350 4500 7500
Wire Wire Line
4500 6900 4500 7050
Wire Wire Line
4900 6900 4900 7050
Wire Wire Line
4900 7350 4900 7500
$EndSCHEMATC

2026
hardware/portapack_h1/cpld/20170522/output_files/portapack_h1_cpld.svf
View File

File diff suppressed because it is too large Load Diff

24
hardware/portapack_h1/cpld/20170522/portapack_h1_cpld.qsf
View File

@ -321,3 +321,27 @@ set_instance_assignment -name WEAK_PULL_UP_RESISTOR ON -to MCU_IO_STBX
set_instance_assignment -name WEAK_PULL_UP_RESISTOR ON -to MCU_LCD_RDX
set_instance_assignment -name WEAK_PULL_UP_RESISTOR ON -to MCU_LCD_WRX
set_instance_assignment -name WEAK_PULL_UP_RESISTOR ON -to MCU_P2_8
set_location_assignment PIN_35 -to GPS_TIMEPULSE
set_instance_assignment -name IO_STANDARD "3.3-V LVCMOS" -to GPS_TIMEPULSE
set_instance_assignment -name CURRENT_STRENGTH_NEW "MINIMUM CURRENT" -to GPS_TIMEPULSE
set_instance_assignment -name SLOW_SLEW_RATE ON -to GPS_TIMEPULSE
set_instance_assignment -name PCI_IO OFF -to GPS_TIMEPULSE
set_instance_assignment -name WEAK_PULL_UP_RESISTOR ON -to GPS_TIMEPULSE
set_location_assignment PIN_36 -to GPS_TX_READY
set_instance_assignment -name IO_STANDARD "3.3-V LVCMOS" -to GPS_TX_READY
set_instance_assignment -name CURRENT_STRENGTH_NEW "MINIMUM CURRENT" -to GPS_TX_READY
set_instance_assignment -name SLOW_SLEW_RATE ON -to GPS_TX_READY
set_instance_assignment -name PCI_IO OFF -to GPS_TX_READY
set_instance_assignment -name WEAK_PULL_UP_RESISTOR ON -to GPS_TX_READY
set_location_assignment PIN_5 -to REF_EN
set_instance_assignment -name IO_STANDARD "3.3-V LVCMOS" -to REF_EN
set_instance_assignment -name CURRENT_STRENGTH_NEW "MINIMUM CURRENT" -to REF_EN
set_instance_assignment -name SLOW_SLEW_RATE ON -to REF_EN
set_location_assignment PIN_7 -to GPS_RESETX
set_instance_assignment -name IO_STANDARD "3.3-V LVCMOS" -to GPS_RESETX
set_instance_assignment -name CURRENT_STRENGTH_NEW "MINIMUM CURRENT" -to GPS_RESETX
set_instance_assignment -name SLOW_SLEW_RATE ON -to GPS_RESETX

16
hardware/portapack_h1/cpld/20170522/top.vhd
View File

@ -53,7 +53,13 @@ entity top is
LCD_TE : in std_logic;
LCD_BACKLIGHT : out std_logic;
AUDIO_RESETX : out std_logic
AUDIO_RESETX : out std_logic;
REF_EN : out std_logic;
GPS_RESETX : out std_logic;
GPS_TX_READY : in std_logic;
GPS_TIMEPULSE : in std_logic
);
end top;
@ -83,6 +89,8 @@ architecture rtl of top is
signal audio_reset_q : std_logic := '1';
signal ref_en_q : std_logic := '0';
signal dir_read : boolean;
signal dir_write : boolean;
@ -128,8 +136,13 @@ begin
lcd_data_in <= LCD_DB;
LCD_DB <= lcd_data_out when lcd_write else (others => 'Z');
-- Reference clock
REF_EN <= ref_en_q;
-- Peripheral reset control
LCD_RESETX <= not lcd_reset_q;
AUDIO_RESETX <= not audio_reset_q;
GPS_RESETX <= '1';
-- MCU interface
mcu_data_out_lcd <= lcd_data_in(15 downto 8) when lcd_read_strobe else lcd_data_in_q;
@ -166,6 +179,7 @@ begin
else
lcd_reset_q <= mcu_data_in(0);
audio_reset_q <= mcu_data_in(1);
ref_en_q <= mcu_data_in(6);
lcd_backlight_q <= mcu_data_in(7);
end if;
end if;

5
hardware/portapack_h1/fp-lib-table
View File

@ -22,4 +22,9 @@
(lib (name tp)(type KiCad)(uri ${KISBLIB}/tp.pretty)(options "")(descr ""))
(lib (name ipc_ledc)(type KiCad)(uri ${KISBLIB}/ipc_ledc.pretty)(options "")(descr ""))
(lib (name sharebrained)(type KiCad)(uri ${KISBLIB}/sharebrained.pretty)(options "")(descr ""))
(lib (name ipc_rescax)(type KiCad)(uri ${KISBLIB}/ipc_rescax.pretty)(options "")(descr ""))
(lib (name ipc_osccc)(type KiCad)(uri ${KISBLIB}/ipc_osccc.pretty)(options "")(descr ""))
(lib (name ipc_beadc)(type KiCad)(uri ${KISBLIB}/ipc_beadc.pretty)(options "")(descr ""))
(lib (name ublox)(type KiCad)(uri ${KISBLIB}/ublox.pretty)(options "")(descr ""))
(lib (name amp_te)(type KiCad)(uri ${KISBLIB}/amp_te.pretty)(options "")(descr ""))
)

370
hardware/portapack_h1/gps.sch Normal file
View File

@ -0,0 +1,370 @@
EESchema Schematic File Version 4
LIBS:portapack_h1-cache
EELAYER 26 0
EELAYER END
$Descr A4 11693 8268
encoding utf-8
Sheet 6 6
Title "PortaPack H1"
Date "2018-08-20"
Rev "20180820"
Comp "ShareBrained Technology, Inc."
Comment1 "Copyright © 2014-2018 Jared Boone"
Comment2 "License: GNU General Public License, version 2"
Comment3 ""
Comment4 ""
$EndDescr
$Comp
L ublox:MAX-M8 U8
U 1 1 5B7E0C1A
P 5800 2900
F 0 "U8" H 5800 3650 60 0000 C CNN
F 1 "MAX-M8" H 5800 3550 60 0000 C CNN
F 2 "ublox:MAX-M8" H 5800 2900 60 0001 C CNN
F 3 "" H 5800 2900 60 0001 C CNN
F 4 "DNP" H 5800 3450 50 0000 C CNN "DNP"
1 5800 2900
1 0 0 -1
$EndComp
$Comp
L Device:C C19
U 1 1 5B7E0D14
P 4600 3450
F 0 "C19" V 4250 3450 50 0000 C CNN
F 1 "10N" V 4350 3450 50 0000 C CNN
F 2 "ipc_capc:IPC_CAPC100X50X55L25N" H 4638 3300 50 0001 C CNN
F 3 "~" H 4600 3450 50 0001 C CNN
F 4 "DNP" V 4450 3450 50 0000 C CNN "DNP"
1 4600 3450
1 0 0 -1
$EndComp
$Comp
L Device:L L1
U 1 1 5B7E0E02
P 4350 2900
F 0 "L1" H 4403 2946 50 0000 L CNN
F 1 "27N" H 4403 2855 50 0000 L CNN
F 2 "ipc_indc:IPC_INDC100X50X60L20N" H 4350 2900 50 0001 C CNN
F 3 "~" H 4350 2900 50 0001 C CNN
F 4 "DNP" H 4450 2750 50 0000 C CNN "DNP"
1 4350 2900
0 -1 -1 0
$EndComp
$Comp
L power:GND #PWR0108
U 1 1 5B7E0F42
P 4600 3700
F 0 "#PWR0108" H 4600 3450 50 0001 C CNN
F 1 "GND" H 4605 3527 50 0000 C CNN
F 2 "" H 4600 3700 50 0001 C CNN
F 3 "" H 4600 3700 50 0001 C CNN
1 4600 3700
1 0 0 -1
$EndComp
$Comp
L power:GND #PWR0109
U 1 1 5B7E0F5A
P 5100 3400
F 0 "#PWR0109" H 5100 3150 50 0001 C CNN
F 1 "GND" H 5105 3227 50 0000 C CNN
F 2 "" H 5100 3400 50 0001 C CNN
F 3 "" H 5100 3400 50 0001 C CNN
1 5100 3400
1 0 0 -1
$EndComp
Wire Wire Line
5200 2500 5100 2500
Wire Wire Line
5100 2500 5100 2700
Wire Wire Line
5200 2700 5100 2700
Connection ~ 5100 2700
Wire Wire Line
5100 2700 5100 3000
Wire Wire Line
5200 2600 4100 2600
Text HLabel 3200 3100 0 60 BiDi ~ 0
SDA
Text HLabel 3200 3500 0 60 BiDi ~ 0
SCL
$Comp
L power:GND #PWR0110
U 1 1 5B7E1247
P 6500 3400
F 0 "#PWR0110" H 6500 3150 50 0001 C CNN
F 1 "GND" H 6505 3227 50 0000 C CNN
F 2 "" H 6500 3400 50 0001 C CNN
F 3 "" H 6500 3400 50 0001 C CNN
1 6500 3400
1 0 0 -1
$EndComp
Wire Wire Line
6400 3300 6500 3300
Wire Wire Line
6500 3300 6500 3400
Text HLabel 7800 1800 2 60 Input ~ 0
V_BACKUP
Text HLabel 6650 1800 0 60 Input ~ 0
VCC
Wire Wire Line
6400 2600 6800 2600
Wire Wire Line
6400 2700 6800 2700
$Comp
L tp:TP TP7
U 1 1 5B7E1777
P 4900 3300
F 0 "TP7" H 4750 3300 50 0000 C CNN
F 1 "TP" H 4900 3300 50 0001 C CNN
F 2 "tp:TP_1MM" H 4900 3300 60 0001 C CNN
F 3 "" H 4900 3300 60 0001 C CNN
1 4900 3300
1 0 0 -1
$EndComp
Wire Wire Line
5000 3300 5200 3300
Text HLabel 6900 3000 2 60 Output ~ 0
TIMEPULSE
Wire Wire Line
6400 3000 6900 3000
$Comp
L tp:TP TP8
U 1 1 5B7E20D6
P 7000 2900
F 0 "TP8" H 6850 2900 50 0000 C CNN
F 1 "TP" H 7000 2900 50 0001 C CNN
F 2 "tp:TP_1MM" H 7000 2900 60 0001 C CNN
F 3 "" H 7000 2900 60 0001 C CNN
1 7000 2900
-1 0 0 1
$EndComp
Wire Wire Line
6400 2900 6900 2900
$Comp
L tp:TP TP9
U 1 1 5B7E27BE
P 7000 3100
F 0 "TP9" H 6850 3100 50 0000 C CNN
F 1 "TP" H 7000 3100 50 0001 C CNN
F 2 "tp:TP_1MM" H 7000 3100 60 0001 C CNN
F 3 "" H 7000 3100 60 0001 C CNN
1 7000 3100
-1 0 0 1
$EndComp
Wire Wire Line
6400 3100 6900 3100
Text HLabel 7800 2500 2 60 Input ~ 0
RESET#
Wire Wire Line
6400 2500 7700 2500
$Comp
L Device:C C20
U 1 1 5B7E512B
P 6800 3450
F 0 "C20" H 6915 3496 50 0000 L CNN
F 1 "100N" H 6915 3405 50 0000 L CNN
F 2 "ipc_capc:IPC_CAPC100X50X55L25N" H 6838 3300 50 0001 C CNN
F 3 "~" H 6800 3450 50 0001 C CNN
F 4 "DNP" H 7000 3300 50 0000 C CNN "DNP"
1 6800 3450
1 0 0 -1
$EndComp
$Comp
L power:GND #PWR0111
U 1 1 5B7E5197
P 6800 3700
F 0 "#PWR0111" H 6800 3450 50 0001 C CNN
F 1 "GND" H 6805 3527 50 0000 C CNN
F 2 "" H 6800 3700 50 0001 C CNN
F 3 "" H 6800 3700 50 0001 C CNN
1 6800 3700
1 0 0 -1
$EndComp
Wire Wire Line
6800 3600 6800 3700
Wire Wire Line
6800 2700 6800 2600
$Comp
L Device:R R25
U 1 1 5B7E62C8
P 7700 2750
F 0 "R25" H 7770 2796 50 0000 L CNN
F 1 "100K" V 7700 2650 50 0000 L CNN
F 2 "ipc_resc:IPC_RESC100X50X40L25N" V 7630 2750 50 0001 C CNN
F 3 "~" H 7700 2750 50 0001 C CNN
F 4 "DNP" H 7850 2700 50 0000 C CNN "DNP"
1 7700 2750
1 0 0 -1
$EndComp
$Comp
L power:GND #PWR0112
U 1 1 5B7E633A
P 7700 3000
F 0 "#PWR0112" H 7700 2750 50 0001 C CNN
F 1 "GND" H 7705 2827 50 0000 C CNN
F 2 "" H 7700 3000 50 0001 C CNN
F 3 "" H 7700 3000 50 0001 C CNN
1 7700 3000
1 0 0 -1
$EndComp
Wire Wire Line
7700 2600 7700 2500
Connection ~ 7700 2500
Wire Wire Line
7700 2500 7800 2500
Wire Wire Line
7700 2900 7700 3000
$Comp
L passive:FBEAD FB1
U 1 1 5B7E9718
P 3550 3100
F 0 "FB1" H 3550 3300 50 0000 C CNN
F 1 "FBEAD" H 3544 3227 50 0001 C CNN
F 2 "ipc_beadc:IPC_BEADC160X80X95L40N" H 3544 3234 60 0001 C CNN
F 3 "" H 3550 3100 60 0000 C CNN
F 4 "DNP" H 3550 3200 50 0000 C CNN "DNP"
F 5 "Murata" H 0 0 50 0001 C CNN "Mfr"
F 6 "BLM18HE152SN1D" H 0 0 50 0001 C CNN "Part"
1 3550 3100
1 0 0 -1
$EndComp
$Comp
L passive:FBEAD FB3
U 1 1 5B7E9798
P 3550 3500
F 0 "FB3" H 3550 3700 50 0000 C CNN
F 1 "FBEAD" H 3544 3627 50 0001 C CNN
F 2 "ipc_beadc:IPC_BEADC160X80X95L40N" H 3550 3500 60 0001 C CNN
F 3 "" H 3550 3500 60 0000 C CNN
F 4 "DNP" H 3550 3600 50 0000 C CNN "DNP"
F 5 "Murata" H 0 0 50 0001 C CNN "Mfr"
F 6 "BLM18HE152SN1D" H 0 0 50 0001 C CNN "Part"
1 3550 3500
1 0 0 -1
$EndComp
Wire Wire Line
3200 3100 3300 3100
Wire Wire Line
3200 3500 3300 3500
Wire Wire Line
3800 3500 3900 3500
Wire Wire Line
3900 3500 3900 3200
Wire Wire Line
3900 3200 5200 3200
$Comp
L Device:R R24
U 1 1 5B7EC300
P 7550 1800
F 0 "R24" V 7450 1800 50 0000 C CNN
F 1 "0R" V 7550 1800 50 0000 C CNN
F 2 "ipc_resc:IPC_RESC100X50X40L25N" V 7480 1800 50 0001 C CNN
F 3 "~" H 7550 1800 50 0001 C CNN
F 4 "DNP" V 7650 1800 50 0000 C CNN "DNP"
1 7550 1800
0 1 1 0
$EndComp
$Comp
L Device:R R23
U 1 1 5B7ED5AD
P 7050 1800
F 0 "R23" V 6950 1800 50 0000 C CNN
F 1 "0R" V 7050 1800 50 0000 C CNN
F 2 "ipc_resc:IPC_RESC100X50X40L25N" V 6980 1800 50 0001 C CNN
F 3 "~" H 7050 1800 50 0001 C CNN
F 4 "DNP" V 7150 1800 50 0000 C CNN "DNP"
1 7050 1800
0 1 1 0
$EndComp
NoConn ~ 5200 2800
Wire Wire Line
5200 3000 5100 3000
Connection ~ 5100 3000
Wire Wire Line
5100 3000 5100 3400
Text HLabel 6900 3200 2 60 Output ~ 0
TX_READY
Wire Wire Line
6400 3200 6900 3200
$Comp
L conn_rf:CONN_COAX P1
U 1 1 5B78522B
P 2550 2600
F 0 "P1" H 2505 2844 60 0000 C CNN
F 1 "CONN_COAX" H 2505 2829 40 0001 C CNN
F 2 "amp_te:1909763-1" H 2505 2754 60 0001 C CNN
F 3 "" H 2550 2600 60 0000 C CNN
F 4 "DNP" H 2505 2746 50 0000 C CNN "DNP"
F 5 "AMP/TE" H 0 0 50 0001 C CNN "Mfr"
F 6 "1909763-1" H 0 0 50 0001 C CNN "Part"
1 2550 2600
-1 0 0 -1
$EndComp
$Comp
L power:GND #PWR0113
U 1 1 5B7852CC
P 2550 2900
F 0 "#PWR0113" H 2550 2650 50 0001 C CNN
F 1 "GND" H 2555 2727 50 0000 C CNN
F 2 "" H 2550 2900 50 0001 C CNN
F 3 "" H 2550 2900 50 0001 C CNN
1 2550 2900
1 0 0 -1
$EndComp
Wire Wire Line
2550 2800 2550 2900
Wire Wire Line
3800 3100 5200 3100
$Comp
L Device:R R26
U 1 1 5B78A3E5
P 4850 2900
F 0 "R26" V 4750 2900 50 0000 C CNN
F 1 "10R" V 4850 2900 50 0000 C CNN
F 2 "ipc_resc:IPC_RESC100X50X40L25N" V 4780 2900 50 0001 C CNN
F 3 "~" H 4850 2900 50 0001 C CNN
F 4 "DNP" V 4950 2900 50 0000 C CNN "DNP"
1 4850 2900
0 1 1 0
$EndComp
Wire Wire Line
5200 2900 5000 2900
Wire Wire Line
4700 2900 4600 2900
Wire Wire Line
4600 2900 4600 3300
Wire Wire Line
4600 3600 4600 3700
Wire Wire Line
4600 2900 4500 2900
Connection ~ 4600 2900
Wire Wire Line
4200 2900 4100 2900
Wire Wire Line
4100 2900 4100 2600
Connection ~ 4100 2600
Wire Wire Line
2700 2600 4100 2600
Wire Wire Line
7800 1800 7700 1800
Wire Wire Line
7400 1800 7300 1800
Wire Wire Line
6650 1800 6800 1800
Wire Wire Line
6800 2600 6800 1800
Connection ~ 6800 2600
Connection ~ 6800 1800
Wire Wire Line
6800 1800 6900 1800
Wire Wire Line
6400 2800 7300 2800
Wire Wire Line
7300 1800 7300 2800
Connection ~ 7300 1800
Wire Wire Line
7300 1800 7200 1800
Wire Wire Line
6800 2700 6800 3300
Connection ~ 6800 2700
$EndSCHEMATC

349
hardware/portapack_h1/hackrf_if.sch
View File

@ -1,35 +1,15 @@
EESchema Schematic File Version 2
LIBS:portapack_h1-rescue
LIBS:hackrf_expansion
LIBS:passive
LIBS:supply
LIBS:trs_jack
LIBS:battery
LIBS:sd
LIBS:ck
LIBS:altera
LIBS:regulator
LIBS:tp
LIBS:header
LIBS:hole
LIBS:sharebrained
LIBS:fiducial
LIBS:eastrising
LIBS:on_semi
LIBS:asahi_kasei
LIBS:ti
LIBS:diode
EESchema Schematic File Version 4
LIBS:portapack_h1-cache
EELAYER 25 0
EELAYER 26 0
EELAYER END
$Descr A4 11693 8268
encoding utf-8
Sheet 4 5
Sheet 4 6
Title "PortaPack H1"
Date "2017-05-22"
Rev "20170522"
Date "2018-08-20"
Rev "20180820"
Comp "ShareBrained Technology, Inc."
Comment1 "Copyright © 2014-2017 Jared Boone"
Comment1 "Copyright © 2014-2018 Jared Boone"
Comment2 "License: GNU General Public License, version 2"
Comment3 ""
Comment4 ""
@ -37,7 +17,7 @@ $EndDescr
Text Label 1300 2600 0 60 ~ 0
MCU_LCD_RD
$Comp
L GND #PWR044
L power:GND #PWR044
U 1 1 53A8CD34
P 3700 4200
F 0 "#PWR044" H 3700 4200 30 0001 C CNN
@ -48,7 +28,7 @@ F 3 "" H 3700 4200 60 0000 C CNN
0 -1 -1 0
$EndComp
$Comp
L GND #PWR045
L power:GND #PWR045
U 1 1 53A8CD3A
P 3700 4700
F 0 "#PWR045" H 3700 4700 30 0001 C CNN
@ -59,7 +39,7 @@ F 3 "" H 3700 4700 60 0000 C CNN
0 -1 -1 0
$EndComp
$Comp
L GND #PWR046
L power:GND #PWR046
U 1 1 53A8CD40
P 3700 3200
F 0 "#PWR046" H 3700 3200 30 0001 C CNN
@ -70,7 +50,7 @@ F 3 "" H 3700 3200 60 0000 C CNN
0 -1 -1 0
$EndComp
$Comp
L GND #PWR047
L power:GND #PWR047
U 1 1 53A8CD46
P 3700 2800
F 0 "#PWR047" H 3700 2800 30 0001 C CNN
@ -81,7 +61,7 @@ F 3 "" H 3700 2800 60 0000 C CNN
0 -1 -1 0
$EndComp
$Comp
L GND #PWR048
L power:GND #PWR048
U 1 1 53A8CD4C
P 3700 2500
F 0 "#PWR048" H 3700 2500 30 0001 C CNN
@ -92,40 +72,40 @@ F 3 "" H 3700 2500 60 0000 C CNN
0 -1 -1 0
$EndComp
$Comp
L +3.3V #PWR049
L power:+3V3 #PWR049
U 1 1 53A8CD52
P 1900 2900
F 0 "#PWR049" H 1900 2860 30 0001 C CNN
F 1 "+3.3V" H 1900 3010 30 0000 C CNN
F 1 "+3V3" H 1900 3010 30 0000 C CNN
F 2 "" H 1900 2900 60 0000 C CNN
F 3 "" H 1900 2900 60 0000 C CNN
1 1900 2900
0 -1 -1 0
$EndComp
$Comp
L +3.3V #PWR050
L power:+3V3 #PWR050
U 1 1 53A8CD58
P 1900 4200
F 0 "#PWR050" H 1900 4160 30 0001 C CNN
F 1 "+3.3V" H 1900 4310 30 0000 C CNN
F 1 "+3V3" H 1900 4310 30 0000 C CNN
F 2 "" H 1900 4200 60 0000 C CNN
F 3 "" H 1900 4200 60 0000 C CNN
1 1900 4200
0 -1 -1 0
$EndComp
$Comp
L +3.3V #PWR051
L power:+3V3 #PWR051
U 1 1 53A8CD5E
P 1900 900
F 0 "#PWR051" H 1900 860 30 0001 C CNN
F 1 "+3.3V" H 1900 1010 30 0000 C CNN
F 1 "+3V3" H 1900 1010 30 0000 C CNN
F 2 "" H 1900 900 60 0000 C CNN
F 3 "" H 1900 900 60 0000 C CNN
1 1900 900
0 -1 -1 0
$EndComp
$Comp
L GND #PWR052
L power:GND #PWR052
U 1 1 53A8CD64
P 1900 1400
F 0 "#PWR052" H 1900 1400 30 0001 C CNN
@ -136,7 +116,7 @@ F 3 "" H 1900 1400 60 0000 C CNN
0 1 1 0
$EndComp
$Comp
L GND #PWR053
L power:GND #PWR053
U 1 1 53A8CD6A
P 1900 1500
F 0 "#PWR053" H 1900 1500 30 0001 C CNN
@ -147,7 +127,7 @@ F 3 "" H 1900 1500 60 0000 C CNN
0 1 1 0
$EndComp
$Comp
L GND #PWR054
L power:GND #PWR054
U 1 1 53A8CD70
P 1900 1700
F 0 "#PWR054" H 1900 1700 30 0001 C CNN
@ -159,7 +139,6 @@ F 3 "" H 1900 1700 60 0000 C CNN
$EndComp
NoConn ~ 3600 4800
NoConn ~ 2000 4800
NoConn ~ 2000 2400
NoConn ~ 3600 2700
NoConn ~ 2000 2700
NoConn ~ 2000 2800
@ -209,41 +188,41 @@ RESET#
NoConn ~ 3600 2900
NoConn ~ 3600 3000
$Comp
L HACKRF_ONE_P20 P20
L hackrf_expansion:HACKRF_ONE_P20 P20
U 1 1 53A8CDAE
P 2800 1300
F 0 "P20" H 2800 1950 60 0000 C CNN
F 1 "HACKRF_ONE_P20" H 2800 650 60 0000 C CNN
F 2 "header:HEADER_11X2_REV_SM_254_AP" H 2800 1300 60 0001 C CNN
F 3 "https://s3.amazonaws.com/mle-assets/parts/TSHSM-1/TSHSM-1.pdf" H 2800 1300 60 0001 C CNN
F 4 "MLE" H 2800 1300 60 0001 C CNN "Mfr"
F 5 "TSHSM-111-D-06-T-V-S-P-TR-AP-LF" H 2800 1300 60 0001 C CNN "Part"
F 3 "https://www.samtec.com/products/tsm-111-01-l-dv-a-p-tr" H 2800 1300 60 0001 C CNN
F 4 "Samtec" H 2800 1300 60 0001 C CNN "Mfr"
F 5 "TSM⁃111⁃01⁃L⁃DV⁃A⁃P⁃TR" H 2800 1300 60 0001 C CNN "Part"
1 2800 1300
1 0 0 -1
$EndComp
$Comp
L HACKRF_ONE_P22 P22
L hackrf_expansion:HACKRF_ONE_P22 P22
U 1 1 53A8CDB6
P 2800 3000
F 0 "P22" H 2800 3750 60 0000 C CNN
F 1 "HACKRF_ONE_P22" H 2800 2250 60 0000 C CNN
F 2 "header:HEADER_13X2_REV_SM_254_AP" H 2800 3000 60 0001 C CNN
F 3 "https://s3.amazonaws.com/mle-assets/parts/TSHSM-1/TSHSM-1.pdf" H 2800 3000 60 0001 C CNN
F 4 "MLE" H 2800 3000 60 0001 C CNN "Mfr"
F 5 "TSHSM-113-D-06-T-V-S-P-TR-AP-LF" H 2800 3000 60 0001 C CNN "Part"
F 3 "https://www.samtec.com/products/tsm-113-01-l-dv-a-p-tr" H 2800 3000 60 0001 C CNN
F 4 "Samtec" H 2800 3000 60 0001 C CNN "Mfr"
F 5 "TSM⁃113⁃01⁃L⁃DV⁃A⁃P⁃TR" H 2800 3000 60 0001 C CNN "Part"
1 2800 3000
1 0 0 -1
$EndComp
$Comp
L HACKRF_ONE_P28 P28
L hackrf_expansion:HACKRF_ONE_P28 P28
U 1 1 53A8CDBE
P 2800 4700
F 0 "P28" H 2800 5350 60 0000 C CNN
F 1 "HACKRF_ONE_P28" H 2800 4050 60 0000 C CNN
F 2 "header:HEADER_11X2_REV_SM_254_AP" H 2800 4700 60 0001 C CNN
F 3 "https://s3.amazonaws.com/mle-assets/parts/TSHSM-1/TSHSM-1.pdf" H 2800 4700 60 0001 C CNN
F 4 "MLE" H 2800 4700 60 0001 C CNN "Mfr"
F 5 "TSHSM-111-D-06-T-V-S-P-TR-AP-LF" H 2800 4700 60 0001 C CNN "Part"
F 3 "https://www.samtec.com/products/tsm-111-01-l-dv-a-p-tr" H 2800 4700 60 0001 C CNN
F 4 "Samtec" H 2800 4700 60 0001 C CNN "Mfr"
F 5 "TSM⁃111⁃01⁃L⁃DV⁃A⁃P⁃TR" H 2800 4700 60 0001 C CNN "Part"
1 2800 4700
1 0 0 -1
$EndComp
@ -264,7 +243,7 @@ Wire Wire Line
Wire Wire Line
4600 3300 3600 3300
Wire Wire Line
1100 5100 2000 5100
1100 5100 1900 5100
Wire Wire Line
3700 3600 3600 3600
Wire Wire Line
@ -348,7 +327,7 @@ Wire Wire Line
Wire Wire Line
4600 2600 3600 2600
$Comp
L 5M40ZE64 U3
L altera:5M40ZE64 U3
U 1 1 53A8D11B
P 8450 3050
F 0 "U3" H 8450 3100 60 0000 C CNN
@ -395,51 +374,51 @@ LCD_DB15
Text Label 6200 3600 0 60 ~ 0
PP_CPLD_TMS
$Comp
L +3.3V #PWR055
L power:+3V3 #PWR055
U 1 1 53A8D13C
P 8300 4750
F 0 "#PWR055" H 8300 4710 30 0001 C CNN
F 1 "+3.3V" H 8300 4860 30 0000 C CNN
F 1 "+3V3" H 8300 4860 30 0000 C CNN
F 2 "" H 8300 4750 60 0000 C CNN
F 3 "" H 8300 4750 60 0000 C CNN
1 8300 4750
-1 0 0 1
$EndComp
$Comp
L +3.3V #PWR056
L power:+3V3 #PWR056
U 1 1 53A8D142
P 6750 2800
F 0 "#PWR056" H 6750 2760 30 0001 C CNN
F 1 "+3.3V" H 6750 2910 30 0000 C CNN
F 1 "+3V3" H 6750 2910 30 0000 C CNN
F 2 "" H 6750 2800 60 0000 C CNN
F 3 "" H 6750 2800 60 0000 C CNN
1 6750 2800
0 -1 -1 0
$EndComp
$Comp
L +1.8V #PWR057
L power:+1V8 #PWR057
U 1 1 53A8D148
P 10150 3000
F 0 "#PWR057" H 10150 3140 20 0001 C CNN
F 1 "+1.8V" H 10150 3110 30 0000 C CNN
F 1 "+1V8" H 10150 3110 30 0000 C CNN
F 2 "" H 10150 3000 60 0000 C CNN
F 3 "" H 10150 3000 60 0000 C CNN
1 10150 3000
0 1 1 0
$EndComp
$Comp
L +1.8V #PWR058
L power:+1V8 #PWR058
U 1 1 53A8D14E
P 6750 3000
F 0 "#PWR058" H 6750 3140 20 0001 C CNN
F 1 "+1.8V" H 6750 3110 30 0000 C CNN
F 1 "+1V8" H 6750 3110 30 0000 C CNN
F 2 "" H 6750 3000 60 0000 C CNN
F 3 "" H 6750 3000 60 0000 C CNN
1 6750 3000
0 -1 -1 0
$EndComp
$Comp
L GND #PWR059
L power:GND #PWR059
U 1 1 53A8D154
P 9650 4750
F 0 "#PWR059" H 9650 4750 30 0001 C CNN
@ -460,22 +439,22 @@ MCU_ADDR
Text Label 9200 5400 1 60 ~ 0
MCU_IO_STBX
$Comp
L +1.8V #PWR060
L power:+1V8 #PWR060
U 1 1 53A8D16D
P 10150 3200
F 0 "#PWR060" H 10150 3340 20 0001 C CNN
F 1 "+1.8V" H 10150 3310 30 0000 C CNN
F 1 "+1V8" H 10150 3310 30 0000 C CNN
F 2 "" H 10150 3200 60 0000 C CNN
F 3 "" H 10150 3200 60 0000 C CNN
1 10150 3200
0 1 1 0
$EndComp
$Comp
L +1.8V #PWR061
L power:+1V8 #PWR061
U 1 1 53A8D173
P 8400 950
F 0 "#PWR061" H 8400 1090 20 0001 C CNN
F 1 "+1.8V" H 8400 1060 30 0000 C CNN
F 1 "+1V8" H 8400 1060 30 0000 C CNN
F 2 "" H 8400 950 60 0000 C CNN
F 3 "" H 8400 950 60 0000 C CNN
1 8400 950
@ -572,23 +551,23 @@ H1_CPLD_TCK
Text Label 7700 5400 1 60 ~ 0
PP_CPLD_TDO
$Comp
L +3.3V #PWR062
L power:+3V3 #PWR062
U 1 1 53A8D521
P 4500 5700
F 0 "#PWR062" H 4500 5660 30 0001 C CNN
F 1 "+3.3V" H 4500 5810 30 0000 C CNN
F 1 "+3V3" H 4500 5810 30 0000 C CNN
F 2 "" H 4500 5700 60 0000 C CNN
F 3 "" H 4500 5700 60 0000 C CNN
1 4500 5700
1 0 0 -1
$EndComp
$Comp
L C C28
L Device:C C28
U 1 1 53A8D527
P 4500 6100
F 0 "C28" H 4550 6200 50 0000 L CNN
F 1 "100N" H 4550 6000 50 0000 L CNN
F 2 "ipc_capc:IPC_CAPC1005X55L25N" H 4500 6100 60 0001 C CNN
F 2 "ipc_capc:IPC_CAPC100X50X55L25N" H 4500 6100 60 0001 C CNN
F 3 "" H 4500 6100 60 0000 C CNN
F 4 "Murata" H 4500 6100 60 0001 C CNN "Mfr"
F 5 "GRM155R61A104KA01" H 4500 6100 60 0001 C CNN "Part"
@ -596,7 +575,7 @@ F 5 "GRM155R61A104KA01" H 4500 6100 60 0001 C CNN "Part"
1 0 0 -1
$EndComp
$Comp
L GND #PWR063
L power:GND #PWR063
U 1 1 53A8D52D
P 5700 7400
F 0 "#PWR063" H 5700 7400 30 0001 C CNN
@ -607,12 +586,12 @@ F 3 "" H 5700 7400 60 0000 C CNN
1 0 0 -1
$EndComp
$Comp
L C C30
L Device:C C30
U 1 1 53A8D542
P 4900 6100
F 0 "C30" H 4950 6200 50 0000 L CNN
F 1 "100N" H 4950 6000 50 0000 L CNN
F 2 "ipc_capc:IPC_CAPC1005X55L25N" H 4900 6100 60 0001 C CNN
F 2 "ipc_capc:IPC_CAPC100X50X55L25N" H 4900 6100 60 0001 C CNN
F 3 "" H 4900 6100 60 0000 C CNN
F 4 "Murata" H 4900 6100 60 0001 C CNN "Mfr"
F 5 "GRM155R61A104KA01" H 4900 6100 60 0001 C CNN "Part"
@ -620,12 +599,12 @@ F 5 "GRM155R61A104KA01" H 4900 6100 60 0001 C CNN "Part"
1 0 0 -1
$EndComp
$Comp
L C C29
L Device:C C29
U 1 1 53A8D548
P 4500 7100
F 0 "C29" H 4550 7200 50 0000 L CNN
F 1 "100N" H 4550 7000 50 0000 L CNN
F 2 "ipc_capc:IPC_CAPC1005X55L25N" H 4500 7100 60 0001 C CNN
F 2 "ipc_capc:IPC_CAPC100X50X55L25N" H 4500 7100 60 0001 C CNN
F 3 "" H 4500 7100 60 0000 C CNN
F 4 "Murata" H 4500 7100 60 0001 C CNN "Mfr"
F 5 "GRM155R61A104KA01" H 4500 7100 60 0001 C CNN "Part"
@ -633,12 +612,12 @@ F 5 "GRM155R61A104KA01" H 4500 7100 60 0001 C CNN "Part"
1 0 0 -1
$EndComp
$Comp
L C C31
L Device:C C31
U 1 1 53A8D54E
P 4900 7100
F 0 "C31" H 4950 7200 50 0000 L CNN
F 1 "100N" H 4950 7000 50 0000 L CNN
F 2 "ipc_capc:IPC_CAPC1005X55L25N" H 4900 7100 60 0001 C CNN
F 2 "ipc_capc:IPC_CAPC100X50X55L25N" H 4900 7100 60 0001 C CNN
F 3 "" H 4900 7100 60 0000 C CNN
F 4 "Murata" H 4900 7100 60 0001 C CNN "Mfr"
F 5 "GRM155R61A104KA01" H 4900 7100 60 0001 C CNN "Part"
@ -646,7 +625,7 @@ F 5 "GRM155R61A104KA01" H 4900 7100 60 0001 C CNN "Part"
1 0 0 -1
$EndComp
$Comp
L GND #PWR064
L power:GND #PWR064
U 1 1 53A8D554
P 4500 6400
F 0 "#PWR064" H 4500 6400 30 0001 C CNN
@ -657,7 +636,7 @@ F 3 "" H 4500 6400 60 0000 C CNN
1 0 0 -1
$EndComp
$Comp
L GND #PWR065
L power:GND #PWR065
U 1 1 53A8D55A
P 4900 6400
F 0 "#PWR065" H 4900 6400 30 0001 C CNN
@ -668,7 +647,7 @@ F 3 "" H 4900 6400 60 0000 C CNN
1 0 0 -1
$EndComp
$Comp
L GND #PWR066
L power:GND #PWR066
U 1 1 53A8D560
P 4500 7400
F 0 "#PWR066" H 4500 7400 30 0001 C CNN
@ -679,7 +658,7 @@ F 3 "" H 4500 7400 60 0000 C CNN
1 0 0 -1
$EndComp
$Comp
L GND #PWR067
L power:GND #PWR067
U 1 1 53A8D566
P 4900 7400
F 0 "#PWR067" H 4900 7400 30 0001 C CNN
@ -690,12 +669,12 @@ F 3 "" H 4900 7400 60 0000 C CNN
1 0 0 -1
$EndComp
$Comp
L C C33
L Device:C C33
U 1 1 53A8D56C
P 5300 7100
F 0 "C33" H 5350 7200 50 0000 L CNN
F 1 "100N" H 5350 7000 50 0000 L CNN
F 2 "ipc_capc:IPC_CAPC1005X55L25N" H 5300 7100 60 0001 C CNN
F 2 "ipc_capc:IPC_CAPC100X50X55L25N" H 5300 7100 60 0001 C CNN
F 3 "" H 5300 7100 60 0000 C CNN
F 4 "Murata" H 5300 7100 60 0001 C CNN "Mfr"
F 5 "GRM155R61A104KA01" H 5300 7100 60 0001 C CNN "Part"
@ -703,12 +682,12 @@ F 5 "GRM155R61A104KA01" H 5300 7100 60 0001 C CNN "Part"
1 0 0 -1
$EndComp
$Comp
L C C35
L Device:C C35
U 1 1 53A8D572
P 5700 7100
F 0 "C35" H 5750 7200 50 0000 L CNN
F 1 "100N" H 5750 7000 50 0000 L CNN
F 2 "ipc_capc:IPC_CAPC1005X55L25N" H 5700 7100 60 0001 C CNN
F 2 "ipc_capc:IPC_CAPC100X50X55L25N" H 5700 7100 60 0001 C CNN
F 3 "" H 5700 7100 60 0000 C CNN
F 4 "Murata" H 5700 7100 60 0001 C CNN "Mfr"
F 5 "GRM155R61A104KA01" H 5700 7100 60 0001 C CNN "Part"
@ -716,7 +695,7 @@ F 5 "GRM155R61A104KA01" H 5700 7100 60 0001 C CNN "Part"
1 0 0 -1
$EndComp
$Comp
L GND #PWR068
L power:GND #PWR068
U 1 1 53A8D578
P 5300 7400
F 0 "#PWR068" H 5300 7400 30 0001 C CNN
@ -727,23 +706,23 @@ F 3 "" H 5300 7400 60 0000 C CNN
1 0 0 -1
$EndComp
$Comp
L +1.8V #PWR069
L power:+1V8 #PWR069
U 1 1 53A8D57E
P 4500 6700
F 0 "#PWR069" H 4500 6840 20 0001 C CNN
F 1 "+1.8V" H 4500 6810 30 0000 C CNN
F 1 "+1V8" H 4500 6810 30 0000 C CNN
F 2 "" H 4500 6700 60 0000 C CNN
F 3 "" H 4500 6700 60 0000 C CNN
1 4500 6700
1 0 0 -1
$EndComp
$Comp
L C C32
L Device:C C32
U 1 1 53A8D5C2
P 5300 6100
F 0 "C32" H 5350 6200 50 0000 L CNN
F 1 "10U" H 5350 6000 50 0000 L CNN
F 2 "ipc_capc:IPC_CAPC2012X135L45N" H 5300 6100 60 0001 C CNN
F 2 "ipc_capc:IPC_CAPC200X125X135L45N" H 5300 6100 60 0001 C CNN
F 3 "" H 5300 6100 60 0000 C CNN
F 4 "Murata" H 5300 6100 60 0001 C CNN "Mfr"
F 5 "GRM21BR61A106KE19" H 5300 6100 60 0001 C CNN "Part"
@ -751,12 +730,12 @@ F 5 "GRM21BR61A106KE19" H 5300 6100 60 0001 C CNN "Part"
1 0 0 -1
$EndComp
$Comp
L C C34
L Device:C C34
U 1 1 53A8D5C8
P 5700 6100
F 0 "C34" H 5750 6200 50 0000 L CNN
F 1 "10U" H 5750 6000 50 0000 L CNN
F 2 "ipc_capc:IPC_CAPC2012X135L45N" H 5700 6100 60 0001 C CNN
F 2 "ipc_capc:IPC_CAPC200X125X135L45N" H 5700 6100 60 0001 C CNN
F 3 "" H 5700 6100 60 0000 C CNN
F 4 "Murata" H 5700 6100 60 0001 C CNN "Mfr"
F 5 "GRM21BR61A106KE19" H 5700 6100 60 0001 C CNN "Part"
@ -764,7 +743,7 @@ F 5 "GRM21BR61A106KE19" H 5700 6100 60 0001 C CNN "Part"
1 0 0 -1
$EndComp
$Comp
L GND #PWR070
L power:GND #PWR070
U 1 1 53A8D5CE
P 5300 6400
F 0 "#PWR070" H 5300 6400 30 0001 C CNN
@ -775,7 +754,7 @@ F 3 "" H 5300 6400 60 0000 C CNN
1 0 0 -1
$EndComp
$Comp
L GND #PWR071
L power:GND #PWR071
U 1 1 53A8D5D4
P 5700 6400
F 0 "#PWR071" H 5700 6400 30 0001 C CNN
@ -786,12 +765,12 @@ F 3 "" H 5700 6400 60 0000 C CNN
1 0 0 -1
$EndComp
$Comp
L C C36
L Device:C C36
U 1 1 53A8D5DA
P 6100 7100
F 0 "C36" H 6150 7200 50 0000 L CNN
F 1 "10U" H 6150 7000 50 0000 L CNN
F 2 "ipc_capc:IPC_CAPC2012X135L45N" H 6100 7100 60 0001 C CNN
F 2 "ipc_capc:IPC_CAPC200X125X135L45N" H 6100 7100 60 0001 C CNN
F 3 "" H 6100 7100 60 0000 C CNN
F 4 "Murata" H 6100 7100 60 0001 C CNN "Mfr"
F 5 "GRM21BR61A106KE19" H 6100 7100 60 0001 C CNN "Part"
@ -799,12 +778,12 @@ F 5 "GRM21BR61A106KE19" H 6100 7100 60 0001 C CNN "Part"
1 0 0 -1
$EndComp
$Comp
L C C37
L Device:C C37
U 1 1 53A8D5E0
P 6500 7100
F 0 "C37" H 6550 7200 50 0000 L CNN
F 1 "10U" H 6550 7000 50 0000 L CNN
F 2 "ipc_capc:IPC_CAPC2012X135L45N" H 6500 7100 60 0001 C CNN
F 2 "ipc_capc:IPC_CAPC200X125X135L45N" H 6500 7100 60 0001 C CNN
F 3 "" H 6500 7100 60 0000 C CNN
F 4 "Murata" H 6500 7100 60 0001 C CNN "Mfr"
F 5 "GRM21BR61A106KE19" H 6500 7100 60 0001 C CNN "Part"
@ -812,7 +791,7 @@ F 5 "GRM21BR61A106KE19" H 6500 7100 60 0001 C CNN "Part"
1 0 0 -1
$EndComp
$Comp
L GND #PWR072
L power:GND #PWR072
U 1 1 53A8D5E6
P 6500 7400
F 0 "#PWR072" H 6500 7400 30 0001 C CNN
@ -823,7 +802,7 @@ F 3 "" H 6500 7400 60 0000 C CNN
1 0 0 -1
$EndComp
$Comp
L GND #PWR073
L power:GND #PWR073
U 1 1 53A8D5EC
P 6100 7400
F 0 "#PWR073" H 6100 7400 30 0001 C CNN
@ -833,58 +812,22 @@ F 3 "" H 6100 7400 60 0000 C CNN
1 6100 7400
1 0 0 -1
$EndComp
Wire Wire Line
6500 7300 6500 7400
Wire Wire Line
6100 7300 6100 7400
Connection ~ 6100 6800
Wire Wire Line
6500 6800 6500 6900
Connection ~ 5700 6800
Wire Wire Line
6100 6800 6100 6900
Wire Wire Line
5700 6300 5700 6400
Connection ~ 5300 5800
Wire Wire Line
5700 5800 5700 5900
Wire Wire Line
5300 6300 5300 6400
Connection ~ 4900 5800
Wire Wire Line
5300 5800 5300 5900
Connection ~ 5300 6800
Wire Wire Line
5300 6800 5300 6900
Connection ~ 4900 6800
Wire Wire Line
5300 7300 5300 7400
Wire Wire Line
5700 7300 5700 7400
Wire Wire Line
5700 6800 5700 6900
Connection ~ 4500 6800
Wire Wire Line
4900 6800 4900 6900
4500 6800 4900 6800
Wire Wire Line
4500 6800 6500 6800
Wire Wire Line
4500 6700 4500 6900
4500 6700 4500 6800
Connection ~ 4500 5800
Wire Wire Line
4900 5800 4900 5900
4500 5800 4900 5800
Wire Wire Line
4500 5800 6500 5800
Wire Wire Line
4500 5700 4500 5900
Wire Wire Line
4500 6300 4500 6400
Wire Wire Line
4900 6300 4900 6400
Wire Wire Line
4500 7300 4500 7400
Wire Wire Line
4900 7300 4900 7400
4500 5700 4500 5800
Wire Wire Line
9100 5500 9100 4650
Text Label 3900 2600 0 60 ~ 0
@ -916,8 +859,6 @@ Wire Wire Line
Wire Wire Line
1900 5300 1800 5300
Connection ~ 1900 5100
Wire Bus Line
7600 650 10750 650
Entry Wire Line
8200 650 8300 750
Entry Wire Line
@ -1022,19 +963,17 @@ Text HLabel 1800 5300 0 60 Input ~ 0
I2S0_RX_SDA
Text Label 10150 3700 0 60 ~ 0
P2_8
Wire Bus Line
10750 650 10750 2700
Wire Wire Line
10050 3300 10300 3300
Wire Wire Line
10300 3400 10050 3400
$Comp
L C C42
L Device:C C42
U 1 1 53B1911F
P 6100 6100
F 0 "C42" H 6150 6200 50 0000 L CNN
F 1 "10U" H 6150 6000 50 0000 L CNN
F 2 "ipc_capc:IPC_CAPC2012X135L45N" H 6100 6100 60 0001 C CNN
F 2 "ipc_capc:IPC_CAPC200X125X135L45N" H 6100 6100 60 0001 C CNN
F 3 "" H 6100 6100 60 0000 C CNN
F 4 "Murata" H 6100 6100 60 0001 C CNN "Mfr"
F 5 "GRM21BR61A106KE19" H 6100 6100 60 0001 C CNN "Part"
@ -1042,7 +981,7 @@ F 5 "GRM21BR61A106KE19" H 6100 6100 60 0001 C CNN "Part"
1 0 0 -1
$EndComp
$Comp
L GND #PWR074
L power:GND #PWR074
U 1 1 53B1912C
P 6100 6400
F 0 "#PWR074" H 6100 6400 30 0001 C CNN
@ -1052,18 +991,14 @@ F 3 "" H 6100 6400 60 0000 C CNN
1 6100 6400
1 0 0 -1
$EndComp
Wire Wire Line
6100 6300 6100 6400
Wire Wire Line
6100 5800 6100 5900
Connection ~ 5700 5800
$Comp
L C C43
L Device:C C43
U 1 1 53B1A065
P 6500 6100
F 0 "C43" H 6550 6200 50 0000 L CNN
F 1 "10U" H 6550 6000 50 0000 L CNN
F 2 "ipc_capc:IPC_CAPC2012X135L45N" H 6500 6100 60 0001 C CNN
F 2 "ipc_capc:IPC_CAPC200X125X135L45N" H 6500 6100 60 0001 C CNN
F 3 "" H 6500 6100 60 0000 C CNN
F 4 "Murata" H 6500 6100 60 0001 C CNN "Mfr"
F 5 "GRM21BR61A106KE19" H 6500 6100 60 0001 C CNN "Part"
@ -1071,7 +1006,7 @@ F 5 "GRM21BR61A106KE19" H 6500 6100 60 0001 C CNN "Part"
1 0 0 -1
$EndComp
$Comp
L GND #PWR075
L power:GND #PWR075
U 1 1 53B1A072
P 6500 6400
F 0 "#PWR075" H 6500 6400 30 0001 C CNN
@ -1081,11 +1016,7 @@ F 3 "" H 6500 6400 60 0000 C CNN
1 6500 6400
1 0 0 -1
$EndComp
Wire Wire Line
6500 5800 6500 5900
Connection ~ 6100 5800
Wire Wire Line
6500 6300 6500 6400
Wire Wire Line
6850 2600 6100 2600
Wire Wire Line
@ -1128,7 +1059,6 @@ Entry Wire Line
10650 2300 10750 2200
Wire Wire Line
7600 1050 7800 1050
NoConn ~ 10050 3600
Text HLabel 6100 2600 0 60 Output ~ 0
AUDIO_RESET#
Text HLabel 3700 1800 2 60 Input ~ 0
@ -1143,7 +1073,6 @@ Text Notes 4500 1900 0 60 ~ 0
Init: I/O is hi-Z with pull-ups.\nSRAM download when VCCINT reaches 1V55.\nUser mode once downloaded and VCCIO OK.\nVCCINT stable to user mode: 200 usec max.\nVCCIOs stable to user mode: 2 usec.\n\nPull-ups: 5-25k @ 3V3, 25-60k @ 1V8.\nExternal R-pull: 1K PD, 10K PU recommended.\nVCCIO=3V3: 2V5, 3V3 inputs OK.\nVCCIO=1V8: 1V5, 1V8, 2V5, 3V3 inputs OK.\n\nJTAG active w/VCCINT, but refers to VCCIO.\nTDI, TMS: weak internal PU\nTCK: weak internal PD (keep low at power-up)
Wire Wire Line
10700 3700 10050 3700
NoConn ~ 10050 3500
Entry Wire Line
8100 650 8200 750
Wire Wire Line
@ -1152,10 +1081,8 @@ Wire Wire Line
11050 2900 10050 2900
Wire Wire Line
11050 3100 10050 3100
NoConn ~ 6850 2700
NoConn ~ 6850 2900
$Comp
L GND #PWR076
L power:GND #PWR076
U 1 1 58FC4CC1
P 7800 1050
F 0 "#PWR076" H 7800 1050 30 0001 C CNN
@ -1165,5 +1092,95 @@ F 3 "" H 7800 1050 60 0000 C CNN
1 7800 1050
0 -1 -1 0
$EndComp
NoConn ~ 3600 2400
Wire Wire Line
6100 6800 6500 6800
Wire Wire Line
5700 6800 6100 6800
Wire Wire Line
5300 5800 5700 5800
Wire Wire Line
4900 5800 5300 5800
Wire Wire Line
5300 6800 5700 6800
Wire Wire Line
4900 6800 5300 6800
Wire Wire Line
1900 5100 2000 5100
Wire Wire Line
5700 5800 6100 5800
Wire Wire Line
6100 5800 6500 5800
Wire Wire Line
4500 5800 4500 5950
Wire Wire Line
4500 6250 4500 6400
Wire Wire Line
4900 6250 4900 6400
Wire Wire Line
4900 5800 4900 5950
Wire Wire Line
5300 5800 5300 5950
Wire Wire Line
5300 6250 5300 6400
Wire Wire Line
5700 6250 5700 6400
Wire Wire Line
5700 5800 5700 5950
Wire Wire Line
6100 5800 6100 5950
Wire Wire Line
6100 6250 6100 6400
Wire Wire Line
6500 6250 6500 6400
Wire Wire Line
6500 5800 6500 5950
Wire Wire Line
4500 6800 4500 6950
Wire Wire Line
4500 7250 4500 7400
Wire Wire Line
4900 7250 4900 7400
Wire Wire Line
4900 6800 4900 6950
Wire Wire Line
5300 6800 5300 6950
Wire Wire Line
5300 7250 5300 7400
Wire Wire Line
5700 7250 5700 7400
Wire Wire Line
5700 6800 5700 6950
Wire Wire Line
6100 6800 6100 6950
Wire Wire Line
6100 7250 6100 7400
Wire Wire Line
6500 7250 6500 7400
Wire Wire Line
6500 6800 6500 6950
Wire Wire Line
3800 2400 3600 2400
Text HLabel 3800 2400 2 60 BiDi ~ 0
CLKIN
Text HLabel 6100 2700 0 60 Output ~ 0
REF_EN
Wire Wire Line
6100 2700 6850 2700
NoConn ~ 2000 2400
Text HLabel 10300 3500 2 60 Input ~ 0
GPS_TX_READY
Wire Wire Line
10300 3500 10050 3500
Text HLabel 10300 3600 2 60 Input ~ 0
GPS_TIMEPULSE
Wire Wire Line
10050 3600 10300 3600
Text HLabel 6100 2900 0 60 Output ~ 0
GPS_RESET#
Wire Wire Line
6100 2900 6850 2900
Wire Bus Line
10750 650 10750 2700
Wire Bus Line
7600 650 10750 650
$EndSCHEMATC

200
hardware/portapack_h1/lcd_sw_sd.sch
View File

@ -1,41 +1,21 @@
EESchema Schematic File Version 2
LIBS:portapack_h1-rescue
LIBS:hackrf_expansion
LIBS:passive
LIBS:supply
LIBS:trs_jack
LIBS:battery
LIBS:sd
LIBS:ck
LIBS:altera
LIBS:regulator
LIBS:tp
LIBS:header
LIBS:hole
LIBS:sharebrained
LIBS:fiducial
LIBS:eastrising
LIBS:on_semi
LIBS:asahi_kasei
LIBS:ti
LIBS:diode
EESchema Schematic File Version 4
LIBS:portapack_h1-cache
EELAYER 25 0
EELAYER 26 0
EELAYER END
$Descr A4 11693 8268
encoding utf-8
Sheet 3 5
Sheet 3 6
Title "PortaPack H1"
Date "2017-05-22"
Rev "20170522"
Date "2018-08-20"
Rev "20180820"
Comp "ShareBrained Technology, Inc."
Comment1 "Copyright © 2014-2017 Jared Boone"
Comment1 "Copyright © 2014-2018 Jared Boone"
Comment2 "License: GNU General Public License, version 2"
Comment3 ""
Comment4 ""
$EndDescr
$Comp
L GND #PWR019
L power:GND #PWR019
U 1 1 53A91608
P 9900 5100
F 0 "#PWR019" H 9900 5100 30 0001 C CNN
@ -46,18 +26,18 @@ F 3 "" H 9900 5100 60 0000 C CNN
0 1 1 0
$EndComp
$Comp
L +3.3V #PWR020
L power:+3V3 #PWR020
U 1 1 53A91614
P 9800 5000
F 0 "#PWR020" H 9800 4960 30 0001 C CNN
F 1 "+3.3V" H 9800 5110 30 0000 C CNN
F 1 "+3V3" H 9800 5110 30 0000 C CNN
F 2 "" H 9800 5000 60 0000 C CNN
F 3 "" H 9800 5000 60 0000 C CNN
1 9800 5000
0 -1 -1 0
$EndComp
$Comp
L GND #PWR021
L power:GND #PWR021
U 1 1 53A91623
P 9900 6000
F 0 "#PWR021" H 9900 6000 30 0001 C CNN
@ -102,12 +82,12 @@ LCD_DB14
Text Label 9300 2500 0 60 ~ 0
LCD_DB15
$Comp
L R R19
L Device:R R19
U 1 1 53A91657
P 8000 2150
F 0 "R19" V 8080 2150 50 0000 C CNN
F 1 "10K" V 8000 2150 50 0001 C CNN
F 2 "ipc_resc:IPC_RESC1005X40L25N" H 8000 2150 60 0001 C CNN
F 2 "ipc_resc:IPC_RESC100X50X40L25N" H 8000 2150 60 0001 C CNN
F 3 "" H 8000 2150 60 0000 C CNN
F 4 "DNP" V 8000 2150 60 0000 C CNN "DNP"
F 5 "Yageo" V 8000 2150 60 0001 C CNN "Mfr"
@ -115,7 +95,7 @@ F 5 "Yageo" V 8000 2150 60 0001 C CNN "Mfr"
-1 0 0 -1
$EndComp
$Comp
L GND #PWR022
L power:GND #PWR022
U 1 1 53A9165D
P 8000 2500
F 0 "#PWR022" H 8000 2500 30 0001 C CNN
@ -126,18 +106,18 @@ F 3 "" H 8000 2500 60 0000 C CNN
1 0 0 -1
$EndComp
$Comp
L +1.8V #PWR023
L power:+1V8 #PWR023
U 1 1 53A91663
P 9800 4800
F 0 "#PWR023" H 9800 4940 20 0001 C CNN
F 1 "+1.8V" H 9800 4910 30 0000 C CNN
F 1 "+1V8" H 9800 4910 30 0000 C CNN
F 2 "" H 9800 4800 60 0000 C CNN
F 3 "" H 9800 4800 60 0000 C CNN
1 9800 4800
0 -1 -1 0
$EndComp
$Comp
L MICROSD_DETSW J2
L sd:MICROSD_DETSW J2
U 1 1 53A8C6D0
P 3900 6300
F 0 "J2" H 3450 6950 60 0000 C CNN
@ -150,7 +130,7 @@ F 5 "SCHA4B0419" H 3900 6300 60 0001 C CNN "Part"
1 0 0 -1
$EndComp
$Comp
L GND #PWR024
L power:GND #PWR024
U 1 1 53A8C6D6
P 3100 6300
F 0 "#PWR024" H 3100 6300 30 0001 C CNN
@ -161,7 +141,7 @@ F 3 "" H 3100 6300 60 0000 C CNN
0 1 1 0
$EndComp
$Comp
L GND #PWR025
L power:GND #PWR025
U 1 1 53A8C6E2
P 3100 6700
F 0 "#PWR025" H 3100 6700 30 0001 C CNN
@ -172,12 +152,12 @@ F 3 "" H 3100 6700 60 0000 C CNN
0 1 1 0
$EndComp
$Comp
L C C27
L Device:C C27
U 1 1 53AA73CE
P 2800 7100
F 0 "C27" H 2850 7200 50 0000 L CNN
F 1 "100N" H 2850 7000 50 0000 L CNN
F 2 "ipc_capc:IPC_CAPC1005X55L25N" H 2800 7100 60 0001 C CNN
F 2 "ipc_capc:IPC_CAPC100X50X55L25N" H 2800 7100 60 0001 C CNN
F 3 "" H 2800 7100 60 0000 C CNN
F 4 "Murata" H 2800 7100 60 0001 C CNN "Mfr"
F 5 "GRM155R61A104KA01" H 2800 7100 60 0001 C CNN "Part"
@ -185,7 +165,7 @@ F 5 "GRM155R61A104KA01" H 2800 7100 60 0001 C CNN "Part"
-1 0 0 -1
$EndComp
$Comp
L GND #PWR026
L power:GND #PWR026
U 1 1 53A8C6EF
P 2400 7400
F 0 "#PWR026" H 2400 7400 30 0001 C CNN
@ -196,7 +176,7 @@ F 3 "" H 2400 7400 60 0000 C CNN
1 0 0 -1
$EndComp
$Comp
L GND #PWR027
L power:GND #PWR027
U 1 1 53A8C6F5
P 4200 7200
F 0 "#PWR027" H 4200 7200 30 0001 C CNN
@ -207,7 +187,7 @@ F 3 "" H 4200 7200 60 0000 C CNN
1 0 0 -1
$EndComp
$Comp
L CK_TSWB-3N-CB SW1
L ck:CK_TSWB-3N-CB SW1
U 1 1 53A8C6FD
P 2500 1450
F 0 "SW1" H 2500 2050 60 0000 C CNN
@ -220,7 +200,7 @@ F 5 "TSWB-3N-CB222 LFS" H 2500 1450 60 0001 C CNN "Part"
1 0 0 -1
$EndComp
$Comp
L GND #PWR028
L power:GND #PWR028
U 1 1 53A8C70A
P 1400 2000
F 0 "#PWR028" H 1400 2000 30 0001 C CNN
@ -231,7 +211,7 @@ F 3 "" H 1400 2000 60 0000 C CNN
1 0 0 -1
$EndComp
$Comp
L GND #PWR029
L power:GND #PWR029
U 1 1 53A8C710
P 3600 2000
F 0 "#PWR029" H 3600 2000 30 0001 C CNN
@ -242,7 +222,7 @@ F 3 "" H 3600 2000 60 0000 C CNN
1 0 0 -1
$EndComp
$Comp
L GND #PWR030
L power:GND #PWR030
U 1 1 53A8C716
P 4000 7200
F 0 "#PWR030" H 4000 7200 30 0001 C CNN
@ -253,12 +233,12 @@ F 3 "" H 4000 7200 60 0000 C CNN
1 0 0 -1
$EndComp
$Comp
L C C26
L Device:C C26
U 1 1 53A8C71C
P 2400 7100
F 0 "C26" H 2450 7200 50 0000 L CNN
F 1 "10U" H 2450 7000 50 0000 L CNN
F 2 "ipc_capc:IPC_CAPC2012X135L45N" H 2400 7100 60 0001 C CNN
F 2 "ipc_capc:IPC_CAPC200X125X135L45N" H 2400 7100 60 0001 C CNN
F 3 "" H 2400 7100 60 0000 C CNN
F 4 "Murata" H 2400 7100 60 0001 C CNN "Mfr"
F 5 "GRM21BR61A106KE19" H 2400 7100 60 0001 C CNN "Part"
@ -266,7 +246,7 @@ F 5 "GRM21BR61A106KE19" H 2400 7100 60 0001 C CNN "Part"
-1 0 0 -1
$EndComp
$Comp
L GND #PWR031
L power:GND #PWR031
U 1 1 53A8C722
P 2800 7400
F 0 "#PWR031" H 2800 7400 30 0001 C CNN
@ -277,11 +257,11 @@ F 3 "" H 2800 7400 60 0000 C CNN
1 0 0 -1
$EndComp
$Comp
L +3.3V #PWR032
L power:+3V3 #PWR032
U 1 1 53A8C728
P 2800 5700
F 0 "#PWR032" H 2800 5660 30 0001 C CNN
F 1 "+3.3V" H 2800 5810 30 0000 C CNN
F 1 "+3V3" H 2800 5810 30 0000 C CNN
F 2 "" H 2800 5700 60 0000 C CNN
F 3 "" H 2800 5700 60 0000 C CNN
1 2800 5700
@ -370,7 +350,7 @@ SD_DAT1
Text HLabel 2200 6800 0 60 Output ~ 0
SD_CD
$Comp
L ER-TFT024-3_PANEL LCD1
L eastrising:ER-TFT024-3_PANEL LCD1
U 1 1 58A60E03
P 8000 4600
F 0 "LCD1" H 8000 5650 60 0000 C CNN
@ -383,7 +363,7 @@ F 5 "ER-TFT024-3" H 8000 4600 60 0001 C CNN "Part"
1 0 0 -1
$EndComp
$Comp
L ER-TFT024-3_FPC J3
L eastrising:ER-TFT024-3_FPC J3
U 1 1 58AE3A81
P 10450 3350
F 0 "J3" H 10450 5950 60 0000 C CNN
@ -396,7 +376,7 @@ F 5 "ER-CON50HT-1" H 10450 3350 60 0001 C CNN "Part"
1 0 0 -1
$EndComp
$Comp
L GND #PWR033
L power:GND #PWR033
U 1 1 58AE4008
P 9900 5800
F 0 "#PWR033" H 9900 5800 30 0001 C CNN
@ -407,7 +387,7 @@ F 3 "" H 9900 5800 60 0000 C CNN
0 1 1 0
$EndComp
$Comp
L GND #PWR034
L power:GND #PWR034
U 1 1 58AE4031
P 9900 5700
F 0 "#PWR034" H 9900 5700 30 0001 C CNN
@ -418,7 +398,7 @@ F 3 "" H 9900 5700 60 0000 C CNN
0 1 1 0
$EndComp
$Comp
L GND #PWR035
L power:GND #PWR035
U 1 1 58AE405A
P 9900 5600
F 0 "#PWR035" H 9900 5600 30 0001 C CNN
@ -429,7 +409,7 @@ F 3 "" H 9900 5600 60 0000 C CNN
0 1 1 0
$EndComp
$Comp
L GND #PWR036
L power:GND #PWR036
U 1 1 58AE9874
P 9800 1900
F 0 "#PWR036" H 9800 1900 30 0001 C CNN
@ -440,7 +420,7 @@ F 3 "" H 9800 1900 60 0000 C CNN
0 1 1 0
$EndComp
$Comp
L GND #PWR037
L power:GND #PWR037
U 1 1 58AE9CF2
P 9800 1600
F 0 "#PWR037" H 9800 1600 30 0001 C CNN
@ -453,7 +433,7 @@ $EndComp
Text HLabel 9600 4600 0 60 Input ~ 0
LCD_CS#
$Comp
L GND #PWR038
L power:GND #PWR038
U 1 1 58B079A0
P 9900 4200
F 0 "#PWR038" H 9900 4200 30 0001 C CNN
@ -465,7 +445,7 @@ F 3 "" H 9900 4200 60 0000 C CNN
$EndComp
NoConn ~ 10000 4100
$Comp
L CAT4004[_AB] U4
L on_semi:CAT4004[_AB] U4
U 1 1 58B747DD
P 2400 3150
F 0 "U4" H 2000 3450 60 0000 L CNN
@ -494,7 +474,7 @@ LEDK2
Text Label 1300 3200 0 60 ~ 0
LEDK1
$Comp
L GND #PWR039
L power:GND #PWR039
U 1 1 58B750FD
P 2400 3700
F 0 "#PWR039" H 2400 3700 30 0001 C CNN
@ -505,7 +485,7 @@ F 3 "" H 2400 3700 60 0000 C CNN
1 0 0 -1
$EndComp
$Comp
L GND #PWR040
L power:GND #PWR040
U 1 1 58B75120
P 1700 3100
F 0 "#PWR040" H 1700 3100 30 0001 C CNN
@ -516,12 +496,12 @@ F 3 "" H 1700 3100 60 0000 C CNN
0 1 1 0
$EndComp
$Comp
L R R20
L Device:R R20
U 1 1 58B751E2
P 3700 3350
F 0 "R20" V 3780 3350 50 0000 C CNN
F 1 "3K9" V 3700 3350 50 0001 C CNN
F 2 "ipc_resc:IPC_RESC1005X40L25N" H 3700 3350 60 0001 C CNN
F 2 "ipc_resc:IPC_RESC100X50X40L25N" H 3700 3350 60 0001 C CNN
F 3 "" H 3700 3350 60 0000 C CNN
F 4 "DNP" V 3700 3350 60 0000 C CNN "DNP"
F 5 "Yageo" V 3700 3350 60 0001 C CNN "Mfr"
@ -529,7 +509,7 @@ F 5 "Yageo" V 3700 3350 60 0001 C CNN "Mfr"
-1 0 0 -1
$EndComp
$Comp
L GND #PWR041
L power:GND #PWR041
U 1 1 58B75265
P 3700 3700
F 0 "#PWR041" H 3700 3700 30 0001 C CNN
@ -543,12 +523,10 @@ Wire Wire Line
2400 3600 2400 3700
Wire Wire Line
3000 3100 3700 3100
Wire Wire Line
3700 3600 3700 3700
Wire Wire Line
1700 3100 1800 3100
Wire Wire Line
3000 3000 4100 3000
3000 3000 4000 3000
Wire Wire Line
3500 3300 3000 3300
Wire Wire Line
@ -573,9 +551,9 @@ Wire Wire Line
9600 4600 10000 4600
Connection ~ 9900 1600
Wire Wire Line
9900 1500 9900 1700
9900 1500 9900 1600
Wire Wire Line
9800 1600 10000 1600
9800 1600 9900 1600
Connection ~ 9900 1900
Connection ~ 9900 2300
Wire Wire Line
@ -592,9 +570,9 @@ Wire Wire Line
Wire Wire Line
9900 2000 10000 2000
Wire Wire Line
9900 1900 9900 2400
9900 1900 9900 2000
Wire Wire Line
9800 1900 10000 1900
9800 1900 9900 1900
Wire Wire Line
9900 1700 10000 1700
Wire Wire Line
@ -614,8 +592,6 @@ Wire Wire Line
3200 6700 3100 6700
Wire Wire Line
3200 6800 2200 6800
Wire Bus Line
9100 2100 9100 3900
Wire Bus Line
8950 2100 9100 2100
Wire Wire Line
@ -645,9 +621,7 @@ Wire Wire Line
Wire Wire Line
4200 7100 4200 7200
Wire Wire Line
2400 7300 2400 7400
Wire Wire Line
2400 6100 3200 6100
2400 6100 2800 6100
Wire Wire Line
3200 6300 3100 6300
Wire Wire Line
@ -663,17 +637,9 @@ Wire Wire Line
Wire Wire Line
2200 5800 3200 5800
Wire Wire Line
2800 5700 2800 6900
2800 5700 2800 6100
Connection ~ 2800 6100
Wire Wire Line
2800 7300 2800 7400
Wire Wire Line
2400 6100 2400 6900
Wire Wire Line
8000 2400 8000 2500
Connection ~ 8000 1800
Wire Wire Line
8000 1800 8000 1900
Wire Wire Line
9200 2500 10000 2500
Wire Wire Line
@ -695,7 +661,7 @@ Wire Wire Line
Wire Wire Line
9600 4300 10000 4300
Wire Wire Line
7900 1800 10000 1800
7900 1800 8000 1800
Wire Wire Line
9600 4500 10000 4500
Wire Wire Line
@ -729,7 +695,7 @@ Wire Wire Line
Wire Wire Line
9800 5000 10000 5000
Wire Wire Line
9800 4800 10000 4800
9800 4800 9900 4800
Wire Wire Line
10000 5100 9900 5100
Wire Wire Line
@ -737,11 +703,11 @@ Wire Wire Line
Wire Wire Line
10000 1500 9900 1500
$Comp
L +1.8V #PWR042
L power:+1V8 #PWR042
U 1 1 58BA7696
P 9900 1400
F 0 "#PWR042" H 9900 1540 20 0001 C CNN
F 1 "+1.8V" H 9900 1510 30 0000 C CNN
F 1 "+1V8" H 9900 1510 30 0000 C CNN
F 2 "" H 9900 1400 60 0000 C CNN
F 3 "" H 9900 1400 60 0000 C CNN
1 9900 1400
@ -754,12 +720,12 @@ EN/DIM: 200k PD internal, enable > 1.3V, disable < 0.4V\nRSET: not required, def
Text HLabel 4100 3000 2 60 Input ~ 0
LCD_VBL
$Comp
L C C14
L Device:C C14
U 1 1 58D0DFA2
P 4000 3300
F 0 "C14" H 4050 3400 50 0000 L CNN
F 1 "1U" H 4050 3200 50 0000 L CNN
F 2 "ipc_capc:IPC_CAPC1608X90L35N" H 4000 3300 60 0001 C CNN
F 2 "ipc_capc:IPC_CAPC160X80X90L35N" H 4000 3300 60 0001 C CNN
F 3 "" H 4000 3300 60 0000 C CNN
F 4 "Murata" H 4000 3300 60 0001 C CNN "Mfr"
F 5 "GRM188R61C105KA93D" H 4000 3300 60 0001 C CNN "Part"
@ -767,7 +733,7 @@ F 5 "GRM188R61C105KA93D" H 4000 3300 60 0001 C CNN "Part"
-1 0 0 -1
$EndComp
$Comp
L GND #PWR043
L power:GND #PWR043
U 1 1 58D0E0F8
P 4000 3600
F 0 "#PWR043" H 4000 3600 30 0001 C CNN
@ -777,9 +743,49 @@ F 3 "" H 4000 3600 60 0000 C CNN
1 4000 3600
1 0 0 -1
$EndComp
Wire Wire Line
4000 3500 4000 3600
Wire Wire Line
4000 3100 4000 3000
Connection ~ 4000 3000
Wire Wire Line
9900 1600 9900 1700
Wire Wire Line
9900 1600 10000 1600
Wire Wire Line
9900 1900 10000 1900
Wire Wire Line
9900 2300 9900 2400
Wire Wire Line
9900 2200 9900 2300
Wire Wire Line
9900 2100 9900 2200
Wire Wire Line
9900 2000 9900 2100
Wire Wire Line
9900 4800 10000 4800
Wire Wire Line
2800 6100 3200 6100
Wire Wire Line
8000 1800 10000 1800
Wire Wire Line
4000 3000 4100 3000
Wire Wire Line
3700 3100 3700 3200
Wire Wire Line
3700 3500 3700 3700
Wire Wire Line
4000 3450 4000 3600
Wire Wire Line
4000 3000 4000 3150
Wire Wire Line
2400 6100 2400 6950
Wire Wire Line
2400 7250 2400 7400
Wire Wire Line
2800 7250 2800 7400
Wire Wire Line
2800 6100 2800 6950
Wire Wire Line
8000 1800 8000 2000
Wire Wire Line
8000 2300 8000 2500
Wire Bus Line
9100 2100 9100 3900
$EndSCHEMATC

6863
hardware/portapack_h1/portapack_h1.kicad_pcb
View File

File diff suppressed because it is too large Load Diff

2089
hardware/portapack_h1/portapack_h1.net
View File

File diff suppressed because it is too large Load Diff

29
hardware/portapack_h1/portapack_h1.pro
View File

@ -1,4 +1,4 @@
update=Mon 19 Jun 2017 03:56:47 PM PDT
update=Wed 25 Jul 2018 01:46:26 PM PDT
version=1
last_client=kicad
[cvpcb]
@ -8,30 +8,6 @@ NetIExt=net
EquName1=devcms
[general]
version=1
[eeschema]
version=1
LibDir=../../../library-kicad
[eeschema/libraries]
LibName1=portapack_h1-rescue
LibName2=hackrf_expansion
LibName3=passive
LibName4=supply
LibName5=trs_jack
LibName6=battery
LibName7=sd
LibName8=ck
LibName9=altera
LibName10=regulator
LibName11=tp
LibName12=header
LibName13=hole
LibName14=sharebrained
LibName15=fiducial
LibName16=eastrising
LibName17=on_semi
LibName18=asahi_kasei
LibName19=ti
LibName20=diode
[pcbnew]
version=1
PageLayoutDescrFile=
@ -61,3 +37,6 @@ NetFmtName=Pcbnew
SpiceForceRefPrefix=0
SpiceUseNetNumbers=0
LabSize=60
[eeschema]
version=1
LibDir=

149
hardware/portapack_h1/portapack_h1.sch
View File

@ -1,41 +1,21 @@
EESchema Schematic File Version 2
LIBS:portapack_h1-rescue
LIBS:hackrf_expansion
LIBS:passive
LIBS:supply
LIBS:trs_jack
LIBS:battery
LIBS:sd
LIBS:ck
LIBS:altera
LIBS:regulator
LIBS:tp
LIBS:header
LIBS:hole
LIBS:sharebrained
LIBS:fiducial
LIBS:eastrising
LIBS:on_semi
LIBS:asahi_kasei
LIBS:ti
LIBS:diode
EESchema Schematic File Version 4
LIBS:portapack_h1-cache
EELAYER 25 0
EELAYER 26 0
EELAYER END
$Descr A4 11693 8268
encoding utf-8
Sheet 1 5
Sheet 1 6
Title "PortaPack H1"
Date "2017-05-22"
Rev "20170522"
Date "2018-08-20"
Rev "20180820"
Comp "ShareBrained Technology, Inc."
Comment1 "Copyright © 2014-2017 Jared Boone"
Comment1 "Copyright © 2014-2018 Jared Boone"
Comment2 "License: GNU General Public License, version 2"
Comment3 ""
Comment4 ""
$EndDescr
$Comp
L HOLE1 H2
L hole:HOLE1 H2
U 1 1 5369BBD8
P 9500 1900
F 0 "H2" H 9500 2050 60 0000 C CNN
@ -46,7 +26,7 @@ F 3 "" H 9500 1900 60 0000 C CNN
1 0 0 -1
$EndComp
$Comp
L HOLE1 H3
L hole:HOLE1 H3
U 1 1 5369BBEC
P 9500 2400
F 0 "H3" H 9500 2550 60 0000 C CNN
@ -57,7 +37,7 @@ F 3 "" H 9500 2400 60 0000 C CNN
1 0 0 -1
$EndComp
$Comp
L HOLE1 H4
L hole:HOLE1 H4
U 1 1 5369BC00
P 9500 2900
F 0 "H4" H 9500 3050 60 0000 C CNN
@ -68,7 +48,7 @@ F 3 "" H 9500 2900 60 0000 C CNN
1 0 0 -1
$EndComp
$Comp
L HOLE1 H5
L hole:HOLE1 H5
U 1 1 5369BC14
P 9500 3400
F 0 "H5" H 9500 3550 60 0000 C CNN
@ -180,6 +160,11 @@ F36 "VIN" I R 6600 5200 60
F37 "VBUS" O R 6600 5000 60
F38 "VBUSCTRL" I R 6600 5100 60
F39 "VBAT" I L 4700 5200 60
F40 "CLKIN" B L 4700 4900 60
F41 "REF_EN" O L 4700 5000 60
F42 "GPS_TX_READY" I L 4700 2800 60
F43 "GPS_TIMEPULSE" I L 4700 2900 60
F44 "GPS_RESET#" O L 4700 3000 60
$EndSheet
Wire Wire Line
6600 1900 7600 1900
@ -240,15 +225,15 @@ Wire Wire Line
Wire Wire Line
3700 2300 4700 2300
Wire Wire Line
4700 2500 3700 2500
4700 2500 4000 2500
Wire Wire Line
3700 2600 4700 2600
3700 2600 4100 2600
Wire Wire Line
9800 1900 9800 3500
9800 1900 9800 2400
Connection ~ 9800 2400
Connection ~ 9800 2900
$Comp
L FIDUCIAL FID1
L fiducial:FIDUCIAL FID1
U 1 1 53B309AC
P 4100 7100
F 0 "FID1" H 4100 7225 60 0000 C CNN
@ -259,7 +244,7 @@ F 3 "" H 4100 7100 60 0000 C CNN
1 0 0 -1
$EndComp
$Comp
L FIDUCIAL FID2
L fiducial:FIDUCIAL FID2
U 1 1 53B30B4C
P 4100 7500
F 0 "FID2" H 4100 7625 60 0000 C CNN
@ -270,7 +255,7 @@ F 3 "" H 4100 7500 60 0000 C CNN
1 0 0 -1
$EndComp
$Comp
L FIDUCIAL FID3
L fiducial:FIDUCIAL FID3
U 1 1 53B30CEC
P 4700 7100
F 0 "FID3" H 4700 7225 60 0000 C CNN
@ -281,18 +266,7 @@ F 3 "" H 4700 7100 60 0000 C CNN
1 0 0 -1
$EndComp
$Comp
L FIDUCIAL FID4
U 1 1 53B30E8C
P 4700 7500
F 0 "FID4" H 4700 7625 60 0000 C CNN
F 1 "FIDUCIAL" H 4700 7375 60 0000 C CNN
F 2 "fiducial:FIDUCIAL_65MIL" H 4700 7500 60 0001 C CNN
F 3 "" H 4700 7500 60 0000 C CNN
1 4700 7500
1 0 0 -1
$EndComp
$Comp
L GND #PWR01
L power:GND #PWR01
U 1 1 53B3303D
P 9800 3500
F 0 "#PWR01" H 9800 3500 30 0001 C CNN
@ -310,7 +284,7 @@ Wire Wire Line
Wire Wire Line
4700 1700 3700 1700
$Sheet
S 4700 5600 1900 700
S 4700 5600 1900 1000
U 58CFF3E3
F0 "power" 50
F1 "power.sch" 50
@ -323,6 +297,9 @@ F7 "VBUS" I R 6600 5700 60
F8 "VBUSCTRL" O R 6600 5800 60
F9 "VIN" O R 6600 5900 60
F10 "VBAT" O L 4700 5700 60
F11 "REF_CLK" O L 4700 6500 60
F12 "REF_EN" I L 4700 6400 60
F13 "GPS_VCC" O R 6600 6400 60
$EndSheet
Wire Wire Line
6600 6200 7600 6200
@ -358,4 +335,78 @@ Wire Wire Line
7000 5200 7000 5900
Wire Wire Line
7000 5900 6600 5900
Wire Wire Line
9800 2400 9800 2900
Wire Wire Line
9800 2900 9800 3400
Wire Wire Line
9800 3400 9800 3500
Wire Wire Line
4700 5000 4300 5000
Wire Wire Line
4300 5000 4300 6400
Wire Wire Line
4300 6400 4700 6400
Wire Wire Line
4700 6500 4200 6500
Wire Wire Line
4200 6500 4200 4900
Wire Wire Line
4200 4900 4700 4900
$Sheet
S 4700 600 1900 800
U 5B7E0B2A
F0 "gps" 50
F1 "gps.sch" 50
F2 "SDA" B L 4700 800 60
F3 "SCL" B L 4700 700 60
F4 "V_BACKUP" I L 4700 1300 60
F5 "VCC" I R 6600 1300 60
F6 "TIMEPULSE" O L 4700 1000 60
F7 "RESET#" I L 4700 1100 60
F8 "TX_READY" O L 4700 900 60
$EndSheet
Wire Wire Line
4700 700 4000 700
Wire Wire Line
4000 700 4000 2500
Connection ~ 4000 2500
Wire Wire Line
4000 2500 3700 2500
Wire Wire Line
4700 800 4100 800
Wire Wire Line
4100 800 4100 2600
Connection ~ 4100 2600
Wire Wire Line
4100 2600 4700 2600
Wire Wire Line
4700 1300 4500 1300
Wire Wire Line
4500 1300 4500 5200
Connection ~ 4500 5200
Wire Wire Line
4200 2800 4700 2800
Wire Wire Line
4700 2900 4300 2900
Wire Wire Line
4700 900 4200 900
Wire Wire Line
4200 900 4200 2800
Wire Wire Line
4700 1000 4300 1000
Wire Wire Line
4300 1000 4300 2900
Wire Wire Line
4700 1100 4400 1100
Wire Wire Line
4400 1100 4400 3000
Wire Wire Line
4400 3000 4700 3000
Wire Wire Line
6600 6400 7100 6400
Wire Wire Line
7100 6400 7100 1300
Wire Wire Line
6600 1300 7100 1300
$EndSCHEMATC

705
hardware/portapack_h1/power.sch
View File

File diff suppressed because it is too large Load Diff

25
hardware/portapack_h1/sym-lib-table Normal file
View File

@ -0,0 +1,25 @@
(sym_lib_table
(lib (name hackrf_expansion)(type Legacy)(uri ${KISBLIB}/hackrf_expansion.lib)(options "")(descr ""))
(lib (name passive)(type Legacy)(uri ${KISBLIB}/passive.lib)(options "")(descr ""))
(lib (name trs_jack)(type Legacy)(uri ${KISBLIB}/trs_jack.lib)(options "")(descr ""))
(lib (name battery)(type Legacy)(uri ${KISBLIB}/battery.lib)(options "")(descr ""))
(lib (name sd)(type Legacy)(uri ${KISBLIB}/sd.lib)(options "")(descr ""))
(lib (name ck)(type Legacy)(uri ${KISBLIB}/ck.lib)(options "")(descr ""))
(lib (name altera)(type Legacy)(uri ${KISBLIB}/altera.lib)(options "")(descr ""))
(lib (name regulator)(type Legacy)(uri ${KISBLIB}/regulator.lib)(options "")(descr ""))
(lib (name tp)(type Legacy)(uri ${KISBLIB}/tp.lib)(options "")(descr ""))
(lib (name header)(type Legacy)(uri ${KISBLIB}/header.lib)(options "")(descr ""))
(lib (name hole)(type Legacy)(uri ${KISBLIB}/hole.lib)(options "")(descr ""))
(lib (name sharebrained)(type Legacy)(uri ${KISBLIB}/sharebrained.lib)(options "")(descr ""))
(lib (name fiducial)(type Legacy)(uri ${KISBLIB}/fiducial.lib)(options "")(descr ""))
(lib (name eastrising)(type Legacy)(uri ${KISBLIB}/eastrising.lib)(options "")(descr ""))
(lib (name on_semi)(type Legacy)(uri ${KISBLIB}/on_semi.lib)(options "")(descr ""))
(lib (name asahi_kasei)(type Legacy)(uri ${KISBLIB}/asahi_kasei.lib)(options "")(descr ""))
(lib (name ti)(type Legacy)(uri ${KISBLIB}/ti.lib)(options "")(descr ""))
(lib (name diode)(type Legacy)(uri ${KISBLIB}/diode.lib)(options "")(descr ""))
(lib (name esd)(type Legacy)(uri ${KISBLIB}/esd.lib)(options "")(descr ""))
(lib (name osc)(type Legacy)(uri ${KISBLIB}/osc.lib)(options "")(descr ""))
(lib (name logic)(type Legacy)(uri ${KISBLIB}/logic.lib)(options "")(descr ""))
(lib (name ublox)(type Legacy)(uri ${KISBLIB}/ublox.lib)(options "")(descr ""))
(lib (name conn_rf)(type Legacy)(uri ${KISBLIB}/conn_rf.lib)(options "")(descr ""))
)