Removed hw, doc, host

hardware/.gitignore

@@ -1,14 +0,0 @@
-# Common
-*.bak
-
-# CPLD tool
-*.bsd
-*.rpt
-tb2_ie_info.xml
-**/cpld/db/
-**/cpld/incremental_db/
-**/cpld/output_files/
-**/cpld/simulation/
-
-# KiCad
-*.kicad_pcb-bak

hardware/portapack_h1/README

@@ -1,55 +0,0 @@
-PortaPack H1 is portability add-on hardware for the HackRF One
-software-defined radio (SDR).
-
-Schematic
-=========
-
-The schematic was drawn using KiCad.
-
-Schematic symbols are cached in the design files, but are also
-available in a separate repository:
-
-	https://github.com/sharebrained/library-kicad/
-
-PCB
-===
-
-The circuit board was designed using KiCad.
-
-PCB footprints are cached in the design files, but are also
-avaliable in a separate repository:
-
-	https://github.com/sharebrained/library-kicad/
-	
-The PCB is a four-layer design. Services such as OSHPark.com have suitable
-four-layer stack ups.
-
-CPLD
-====
-
-The CPLD bitstream is prepared using Altera Quartus tools.
-
-The CPLD is programmed from within the PortaPack firmware, by bit-banging
-the JTAG pins from the HackRF One's microcontroller.
-
-License
-=======
-
-Copyright (C) 2013, 2014, 2015 Jared Boone, ShareBrained Technology, Inc.
-
-These files are part of PortaPack.
-
-This program is free software; you can redistribute it and/or modify
-it under the terms of the GNU General Public License as published by
-the Free Software Foundation; either version 2, or (at your option)
-any later version.
-
-This program is distributed in the hope that it will be useful,
-but WITHOUT ANY WARRANTY; without even the implied warranty of
-MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
-GNU General Public License for more details.
-
-You should have received a copy of the GNU General Public License
-along with this program; see the file COPYING.  If not, write to
-the Free Software Foundation, Inc., 51 Franklin Street,
-Boston, MA 02110-1301, USA.

hardware/portapack_h1/audio.sch

@@ -1,989 +0,0 @@
-EESchema Schematic File Version 2
-LIBS:hackrf_expansion
-LIBS:wolfson
-LIBS:passive
-LIBS:lcd_kingtech
-LIBS:supply
-LIBS:io_expander
-LIBS:trs_jack
-LIBS:battery
-LIBS:mosfet
-LIBS:microphone
-LIBS:sd
-LIBS:ck
-LIBS:altera
-LIBS:regulator
-LIBS:tp
-LIBS:header
-LIBS:hole
-LIBS:sharebrained
-LIBS:fiducial
-LIBS:portapack_h1-cache
-EELAYER 25 0
-EELAYER END
-$Descr A4 11693 8268
-encoding utf-8
-Sheet 2 4
-Title "PortaPack H1"
-Date "21 Aug 2015"
-Rev "20150821"
-Comp "ShareBrained Technology, Inc."
-Comment1 "Copyright © 2014, 2015 Jared Boone"
-Comment2 "License: GNU General Public License, version 2"
-Comment3 ""
-Comment4 ""
-$EndDescr
-$Comp
-L CP C18
-U 1 1 53A8C256
-P 7700 3700
-F 0 "C18" H 7750 3800 50  0000 L CNN
-F 1 "220U" H 7750 3600 50  0000 L CNN
-F 2 "ipc_capae:IPC_CAPAE830X620N" H 7700 3700 60  0001 C CNN
-F 3 "" H 7700 3700 60  0000 C CNN
-F 4 "Nichicon" H 7700 3700 60  0001 C CNN "Mfr"
-F 5 "UWX1A221MCL1GB" H 7700 3700 60  0001 C CNN "Part"
-	1    7700 3700
-	0    -1   -1   0   
-$EndComp
-$Comp
-L CP C19
-U 1 1 53A8C25E
-P 7700 4100
-F 0 "C19" H 7750 4200 50  0000 L CNN
-F 1 "220U" H 7750 4000 50  0000 L CNN
-F 2 "ipc_capae:IPC_CAPAE830X620N" H 7700 4100 60  0001 C CNN
-F 3 "" H 7700 4100 60  0000 C CNN
-F 4 "Nichicon" H 7700 4100 60  0001 C CNN "Mfr"
-F 5 "UWX1A221MCL1GB" H 7700 4100 60  0001 C CNN "Part"
-	1    7700 4100
-	0    -1   -1   0   
-$EndComp
-$Comp
-L R R11
-U 1 1 53A8C264
-P 8000 3350
-F 0 "R11" V 8080 3350 50  0000 C CNN
-F 1 "47K" V 8000 3350 50  0000 C CNN
-F 2 "ipc_resc:IPC_RESC1608X55N" H 8000 3350 60  0001 C CNN
-F 3 "" H 8000 3350 60  0000 C CNN
-F 4 "Yageo" V 8000 3350 60  0001 C CNN "Mfr"
-F 5 "RC0603FR-0747KL" V 8000 3350 60  0001 C CNN "Part"
-	1    8000 3350
-	-1   0    0    -1  
-$EndComp
-$Comp
-L R R12
-U 1 1 53A8C26A
-P 8000 4450
-F 0 "R12" V 8080 4450 50  0000 C CNN
-F 1 "47K" V 8000 4450 50  0000 C CNN
-F 2 "ipc_resc:IPC_RESC1608X55N" H 8000 4450 60  0001 C CNN
-F 3 "" H 8000 4450 60  0000 C CNN
-F 4 "Yageo" V 8000 4450 60  0001 C CNN "Mfr"
-F 5 "RC0603FR-0747KL" V 8000 4450 60  0001 C CNN "Part"
-	1    8000 4450
-	-1   0    0    -1  
-$EndComp
-$Comp
-L GND #PWR02
-U 1 1 53A8C270
-P 8000 3000
-F 0 "#PWR02" H 8000 3000 30  0001 C CNN
-F 1 "GND" H 8000 2930 30  0001 C CNN
-F 2 "" H 8000 3000 60  0000 C CNN
-F 3 "" H 8000 3000 60  0000 C CNN
-	1    8000 3000
-	-1   0    0    1   
-$EndComp
-$Comp
-L GND #PWR03
-U 1 1 53A8C276
-P 8000 4800
-F 0 "#PWR03" H 8000 4800 30  0001 C CNN
-F 1 "GND" H 8000 4730 30  0001 C CNN
-F 2 "" H 8000 4800 60  0000 C CNN
-F 3 "" H 8000 4800 60  0000 C CNN
-	1    8000 4800
-	1    0    0    -1  
-$EndComp
-Text Label 7000 3700 0    60   ~ 0
-LHPOUT
-Text Label 7000 4100 0    60   ~ 0
-RHPOUT
-$Comp
-L C C22
-U 1 1 53A8C27E
-P 8300 3400
-F 0 "C22" H 8350 3500 50  0000 L CNN
-F 1 "220P" H 8350 3300 50  0000 L CNN
-F 2 "ipc_capc:IPC_CAPC1608X95N" H 8300 3400 60  0001 C CNN
-F 3 "" H 8300 3400 60  0000 C CNN
-F 4 "Murata" H 8300 3400 60  0001 C CNN "Mfr"
-F 5 "GRM1885C1H221JA01" H 8300 3400 60  0001 C CNN "Part"
-	1    8300 3400
-	1    0    0    -1  
-$EndComp
-$Comp
-L C C23
-U 1 1 53A8C284
-P 8300 4400
-F 0 "C23" H 8350 4500 50  0000 L CNN
-F 1 "220P" H 8350 4300 50  0000 L CNN
-F 2 "ipc_capc:IPC_CAPC1608X95N" H 8300 4400 60  0001 C CNN
-F 3 "" H 8300 4400 60  0000 C CNN
-F 4 "Murata" H 8300 4400 60  0001 C CNN "Mfr"
-F 5 "GRM1885C1H221JA01" H 8300 4400 60  0001 C CNN "Part"
-	1    8300 4400
-	1    0    0    -1  
-$EndComp
-$Comp
-L GND #PWR04
-U 1 1 53A8C28A
-P 8300 3100
-F 0 "#PWR04" H 8300 3100 30  0001 C CNN
-F 1 "GND" H 8300 3030 30  0001 C CNN
-F 2 "" H 8300 3100 60  0000 C CNN
-F 3 "" H 8300 3100 60  0000 C CNN
-	1    8300 3100
-	-1   0    0    1   
-$EndComp
-$Comp
-L GND #PWR05
-U 1 1 53A8C290
-P 8300 4700
-F 0 "#PWR05" H 8300 4700 30  0001 C CNN
-F 1 "GND" H 8300 4630 30  0001 C CNN
-F 2 "" H 8300 4700 60  0000 C CNN
-F 3 "" H 8300 4700 60  0000 C CNN
-	1    8300 4700
-	1    0    0    -1  
-$EndComp
-$Comp
-L R R17
-U 1 1 53A8C296
-P 9300 5950
-F 0 "R17" V 9380 5950 50  0000 C CNN
-F 1 "47K" V 9300 5950 50  0000 C CNN
-F 2 "ipc_resc:IPC_RESC1608X55N" H 9300 5950 60  0001 C CNN
-F 3 "" H 9300 5950 60  0000 C CNN
-F 4 "Yageo" V 9300 5950 60  0001 C CNN "Mfr"
-F 5 "RC0603FR-0747KL" V 9300 5950 60  0001 C CNN "Part"
-	1    9300 5950
-	-1   0    0    -1  
-$EndComp
-$Comp
-L R R18
-U 1 1 53A8C29C
-P 9650 5600
-F 0 "R18" V 9730 5600 50  0000 C CNN
-F 1 "680R" V 9650 5600 50  0000 C CNN
-F 2 "ipc_resc:IPC_RESC1608X55N" H 9650 5600 60  0001 C CNN
-F 3 "" H 9650 5600 60  0000 C CNN
-F 4 "Yageo" V 9650 5600 60  0001 C CNN "Mfr"
-F 5 "RC0603FR-07681RL" V 9650 5600 60  0001 C CNN "Part"
-	1    9650 5600
-	0    1    -1   0   
-$EndComp
-$Comp
-L C C25
-U 1 1 53A8C2A2
-P 8800 5900
-F 0 "C25" H 8850 6000 50  0000 L CNN
-F 1 "220P" H 8850 5800 50  0000 L CNN
-F 2 "ipc_capc:IPC_CAPC1608X95N" H 8800 5900 60  0001 C CNN
-F 3 "" H 8800 5900 60  0000 C CNN
-F 4 "Murata" H 8800 5900 60  0001 C CNN "Mfr"
-F 5 "GRM1885C1H221JA01" H 8800 5900 60  0001 C CNN "Part"
-	1    8800 5900
-	-1   0    0    -1  
-$EndComp
-$Comp
-L CP C24
-U 1 1 53A8C2AA
-P 8500 5600
-F 0 "C24" H 8550 5700 50  0000 L CNN
-F 1 "1U" H 8550 5500 50  0000 L CNN
-F 2 "ipc_capae:IPC_CAPAE430X540N" H 8500 5600 60  0001 C CNN
-F 3 "" H 8500 5600 60  0000 C CNN
-F 4 "Kemet" H 8500 5600 60  0001 C CNN "Mfr"
-F 5 "EDK105M050A9BAA" H 8500 5600 60  0001 C CNN "Part"
-	1    8500 5600
-	0    -1   -1   0   
-$EndComp
-$Comp
-L R R10
-U 1 1 53A8C2B0
-P 7950 5600
-F 0 "R10" V 8030 5600 50  0000 C CNN
-F 1 "0R" V 7950 5600 50  0000 C CNN
-F 2 "ipc_resc:IPC_RESC1608X55N" H 7950 5600 60  0001 C CNN
-F 3 "" H 7950 5600 60  0000 C CNN
-F 4 "Yageo" V 7950 5600 60  0001 C CNN "Mfr"
-F 5 "RC0603JR-070RL" V 7950 5600 60  0001 C CNN "Part"
-	1    7950 5600
-	0    1    -1   0   
-$EndComp
-$Comp
-L GND #PWR06
-U 1 1 53A8C2B6
-P 9300 6300
-F 0 "#PWR06" H 9300 6300 30  0001 C CNN
-F 1 "GND" H 9300 6230 30  0001 C CNN
-F 2 "" H 9300 6300 60  0000 C CNN
-F 3 "" H 9300 6300 60  0000 C CNN
-	1    9300 6300
-	1    0    0    -1  
-$EndComp
-$Comp
-L GND #PWR07
-U 1 1 53A8C2BC
-P 8800 6200
-F 0 "#PWR07" H 8800 6200 30  0001 C CNN
-F 1 "GND" H 8800 6130 30  0001 C CNN
-F 2 "" H 8800 6200 60  0000 C CNN
-F 3 "" H 8800 6200 60  0000 C CNN
-	1    8800 6200
-	1    0    0    -1  
-$EndComp
-Text Label 10000 5600 0    60   ~ 0
-MICBIAS
-Text Label 7300 5600 0    60   ~ 0
-MICIN
-$Comp
-L TRRS_SW_JACK P2
-U 1 1 53A8C2C6
-P 9650 4100
-F 0 "P2" H 9200 4100 60  0000 C CNN
-F 1 "TRRS_SW_JACK" H 9450 4350 60  0000 C CNN
-F 2 "cui:CUI_SJ-43516-SMT" H 9650 4100 60  0001 C CNN
-F 3 "" H 9650 4100 60  0000 C CNN
-F 4 "CUI" H 9650 4100 60  0001 C CNN "Mfr"
-F 5 "SJ-43514-SMT" H 9650 4100 60  0001 C CNN "Part"
-	1    9650 4100
-	-1   0    0    1   
-$EndComp
-$Comp
-L GND #PWR08
-U 1 1 53A8C2CC
-P 9000 5000
-F 0 "#PWR08" H 9000 5000 30  0001 C CNN
-F 1 "GND" H 9000 4930 30  0001 C CNN
-F 2 "" H 9000 5000 60  0000 C CNN
-F 3 "" H 9000 5000 60  0000 C CNN
-	1    9000 5000
-	1    0    0    -1  
-$EndComp
-$Comp
-L L L4
-U 1 1 53A8C2E2
-P 8650 3700
-F 0 "L4" V 8600 3700 40  0000 C CNN
-F 1 "L" V 8750 3700 40  0000 C CNN
-F 2 "ipc_indc:IPC_INDC1608X95N" H 8650 3700 60  0001 C CNN
-F 3 "" H 8650 3700 60  0000 C CNN
-F 4 "Murata" V 8650 3700 60  0001 C CNN "Mfr"
-F 5 "BLM18HE152SN1D" V 8650 3700 60  0001 C CNN "Part"
-	1    8650 3700
-	0    1    1    0   
-$EndComp
-$Comp
-L L L5
-U 1 1 53A8C2E8
-P 8650 4100
-F 0 "L5" V 8600 4100 40  0000 C CNN
-F 1 "L" V 8750 4100 40  0000 C CNN
-F 2 "ipc_indc:IPC_INDC1608X95N" H 8650 4100 60  0001 C CNN
-F 3 "" H 8650 4100 60  0000 C CNN
-F 4 "Murata" V 8650 4100 60  0001 C CNN "Mfr"
-F 5 "BLM18HE152SN1D" V 8650 4100 60  0001 C CNN "Part"
-	1    8650 4100
-	0    1    1    0   
-$EndComp
-$Comp
-L L L6
-U 1 1 53A8C2EE
-P 9000 4650
-F 0 "L6" V 8950 4650 40  0000 C CNN
-F 1 "L" V 9100 4650 40  0000 C CNN
-F 2 "ipc_indc:IPC_INDC1608X95N" H 9000 4650 60  0001 C CNN
-F 3 "" H 9000 4650 60  0000 C CNN
-F 4 "Murata" V 9000 4650 60  0001 C CNN "Mfr"
-F 5 "BLM18HE152SN1D" V 9000 4650 60  0001 C CNN "Part"
-	1    9000 4650
-	1    0    0    -1  
-$EndComp
-$Comp
-L L L9
-U 1 1 53A8C2F4
-P 9300 4650
-F 0 "L9" V 9250 4650 40  0000 C CNN
-F 1 "L" V 9400 4650 40  0000 C CNN
-F 2 "ipc_indc:IPC_INDC1608X95N" H 9300 4650 60  0001 C CNN
-F 3 "" H 9300 4650 60  0000 C CNN
-F 4 "Murata" V 9300 4650 60  0001 C CNN "Mfr"
-F 5 "BLM18HE152SN1D" V 9300 4650 60  0001 C CNN "Part"
-	1    9300 4650
-	1    0    0    -1  
-$EndComp
-$Comp
-L WM8731SEDS U1
-U 1 1 53A8C66D
-P 2600 3850
-F 0 "U1" H 2150 4650 60  0000 C CNN
-F 1 "WM8731SEDS" H 2800 4650 60  0000 C CNN
-F 2 "ipc_sop:IPC_SOP65P780X200-28N" H 2600 3850 60  0001 C CNN
-F 3 "" H 2600 3850 60  0000 C CNN
-F 4 "Wolfson" H 2600 3850 60  0001 C CNN "Mfr"
-F 5 "WM8731SEDS/V" H 2600 3850 60  0001 C CNN "Part"
-	1    2600 3850
-	1    0    0    -1  
-$EndComp
-$Comp
-L GND #PWR09
-U 1 1 53A8C673
-P 3400 4500
-F 0 "#PWR09" H 3400 4500 30  0001 C CNN
-F 1 "GND" H 3400 4430 30  0001 C CNN
-F 2 "" H 3400 4500 60  0000 C CNN
-F 3 "" H 3400 4500 60  0000 C CNN
-	1    3400 4500
-	0    -1   -1   0   
-$EndComp
-$Comp
-L GND #PWR010
-U 1 1 53A8C679
-P 3400 3200
-F 0 "#PWR010" H 3400 3200 30  0001 C CNN
-F 1 "GND" H 3400 3130 30  0001 C CNN
-F 2 "" H 3400 3200 60  0000 C CNN
-F 3 "" H 3400 3200 60  0000 C CNN
-	1    3400 3200
-	0    -1   -1   0   
-$EndComp
-$Comp
-L GND #PWR011
-U 1 1 53A8C67F
-P 1800 4200
-F 0 "#PWR011" H 1800 4200 30  0001 C CNN
-F 1 "GND" H 1800 4130 30  0001 C CNN
-F 2 "" H 1800 4200 60  0000 C CNN
-F 3 "" H 1800 4200 60  0000 C CNN
-	1    1800 4200
-	0    1    1    0   
-$EndComp
-NoConn ~ 3300 3400
-NoConn ~ 1900 3300
-$Comp
-L C C6
-U 1 1 53A8C687
-P 4900 6200
-F 0 "C6" H 4950 6300 50  0000 L CNN
-F 1 "100N" H 4950 6100 50  0000 L CNN
-F 2 "ipc_capc:IPC_CAPC1005X55N" H 4900 6200 60  0001 C CNN
-F 3 "" H 4900 6200 60  0000 C CNN
-F 4 "Murata" H 4900 6200 60  0001 C CNN "Mfr"
-F 5 "GRM155R61A104KA01" H 4900 6200 60  0001 C CNN "Part"
-	1    4900 6200
-	-1   0    0    -1  
-$EndComp
-$Comp
-L C C10
-U 1 1 53A8C68D
-P 5700 6200
-F 0 "C10" H 5750 6300 50  0000 L CNN
-F 1 "100N" H 5750 6100 50  0000 L CNN
-F 2 "ipc_capc:IPC_CAPC1005X55N" H 5700 6200 60  0001 C CNN
-F 3 "" H 5700 6200 60  0000 C CNN
-F 4 "Murata" H 5700 6200 60  0001 C CNN "Mfr"
-F 5 "GRM155R61A104KA01" H 5700 6200 60  0001 C CNN "Part"
-	1    5700 6200
-	-1   0    0    -1  
-$EndComp
-$Comp
-L GND #PWR012
-U 1 1 53A8C693
-P 5300 6500
-F 0 "#PWR012" H 5300 6500 30  0001 C CNN
-F 1 "GND" H 5300 6430 30  0001 C CNN
-F 2 "" H 5300 6500 60  0000 C CNN
-F 3 "" H 5300 6500 60  0000 C CNN
-	1    5300 6500
-	1    0    0    -1  
-$EndComp
-$Comp
-L GND #PWR013
-U 1 1 53A8C699
-P 5700 6500
-F 0 "#PWR013" H 5700 6500 30  0001 C CNN
-F 1 "GND" H 5700 6430 30  0001 C CNN
-F 2 "" H 5700 6500 60  0000 C CNN
-F 3 "" H 5700 6500 60  0000 C CNN
-	1    5700 6500
-	1    0    0    -1  
-$EndComp
-$Comp
-L C C3
-U 1 1 53A8C69F
-P 3500 7100
-F 0 "C3" H 3550 7200 50  0000 L CNN
-F 1 "100N" H 3550 7000 50  0000 L CNN
-F 2 "ipc_capc:IPC_CAPC1005X55N" H 3500 7100 60  0001 C CNN
-F 3 "" H 3500 7100 60  0000 C CNN
-F 4 "Murata" H 3500 7100 60  0001 C CNN "Mfr"
-F 5 "GRM155R61A104KA01" H 3500 7100 60  0001 C CNN "Part"
-	1    3500 7100
-	-1   0    0    -1  
-$EndComp
-$Comp
-L C C2
-U 1 1 53A8C6A5
-P 3100 7100
-F 0 "C2" H 3150 7200 50  0000 L CNN
-F 1 "100N" H 3150 7000 50  0000 L CNN
-F 2 "ipc_capc:IPC_CAPC1005X55N" H 3100 7100 60  0001 C CNN
-F 3 "" H 3100 7100 60  0000 C CNN
-F 4 "Murata" H 3100 7100 60  0001 C CNN "Mfr"
-F 5 "GRM155R61A104KA01" H 3100 7100 60  0001 C CNN "Part"
-	1    3100 7100
-	-1   0    0    -1  
-$EndComp
-$Comp
-L C C5
-U 1 1 53A8C6AB
-P 4300 7100
-F 0 "C5" H 4350 7200 50  0000 L CNN
-F 1 "100N" H 4350 7000 50  0000 L CNN
-F 2 "ipc_capc:IPC_CAPC1005X55N" H 4300 7100 60  0001 C CNN
-F 3 "" H 4300 7100 60  0000 C CNN
-F 4 "Murata" H 4300 7100 60  0001 C CNN "Mfr"
-F 5 "GRM155R61A104KA01" H 4300 7100 60  0001 C CNN "Part"
-	1    4300 7100
-	-1   0    0    -1  
-$EndComp
-$Comp
-L C C4
-U 1 1 53A8C6B1
-P 3900 7100
-F 0 "C4" H 3950 7200 50  0000 L CNN
-F 1 "100N" H 3950 7000 50  0000 L CNN
-F 2 "ipc_capc:IPC_CAPC1005X55N" H 3900 7100 60  0001 C CNN
-F 3 "" H 3900 7100 60  0000 C CNN
-F 4 "Murata" H 3900 7100 60  0001 C CNN "Mfr"
-F 5 "GRM155R61A104KA01" H 3900 7100 60  0001 C CNN "Part"
-	1    3900 7100
-	-1   0    0    -1  
-$EndComp
-$Comp
-L GND #PWR014
-U 1 1 53A8C6B7
-P 3100 7400
-F 0 "#PWR014" H 3100 7400 30  0001 C CNN
-F 1 "GND" H 3100 7330 30  0001 C CNN
-F 2 "" H 3100 7400 60  0000 C CNN
-F 3 "" H 3100 7400 60  0000 C CNN
-	1    3100 7400
-	1    0    0    -1  
-$EndComp
-$Comp
-L GND #PWR015
-U 1 1 53A8C6BD
-P 3500 7400
-F 0 "#PWR015" H 3500 7400 30  0001 C CNN
-F 1 "GND" H 3500 7330 30  0001 C CNN
-F 2 "" H 3500 7400 60  0000 C CNN
-F 3 "" H 3500 7400 60  0000 C CNN
-	1    3500 7400
-	1    0    0    -1  
-$EndComp
-$Comp
-L GND #PWR016
-U 1 1 53A8C6C3
-P 3900 7400
-F 0 "#PWR016" H 3900 7400 30  0001 C CNN
-F 1 "GND" H 3900 7330 30  0001 C CNN
-F 2 "" H 3900 7400 60  0000 C CNN
-F 3 "" H 3900 7400 60  0000 C CNN
-	1    3900 7400
-	1    0    0    -1  
-$EndComp
-Text Label 1200 3400 0    60   ~ 0
-I2S0_SCK_R
-Text Label 1200 3500 0    60   ~ 0
-I2S0_TX_SDA_R
-Text Label 1200 3600 0    60   ~ 0
-I2S0_WS_R
-Text Label 1200 4000 0    60   ~ 0
-LHPOUT
-Text Label 1200 4100 0    60   ~ 0
-RHPOUT
-Text Label 3400 4200 0    60   ~ 0
-MICIN
-Text Label 3400 4300 0    60   ~ 0
-MICBIAS
-Text Label 3400 3500 0    60   ~ 0
-I2S0_MCLK_R
-$Comp
-L GND #PWR017
-U 1 1 53A8C6D8
-P 3500 3800
-F 0 "#PWR017" H 3500 3800 30  0001 C CNN
-F 1 "GND" H 3500 3730 30  0001 C CNN
-F 2 "" H 3500 3800 60  0000 C CNN
-F 3 "" H 3500 3800 60  0000 C CNN
-	1    3500 3800
-	0    -1   -1   0   
-$EndComp
-Text Notes 1100 4800 0    60   ~ 0
-WM8731 DAI is hi-Z,\n100K PD when disabled
-$Comp
-L GND #PWR018
-U 1 1 53A8C6E9
-P 4300 7400
-F 0 "#PWR018" H 4300 7400 30  0001 C CNN
-F 1 "GND" H 4300 7330 30  0001 C CNN
-F 2 "" H 4300 7400 60  0000 C CNN
-F 3 "" H 4300 7400 60  0000 C CNN
-	1    4300 7400
-	1    0    0    -1  
-$EndComp
-$Comp
-L C C12
-U 1 1 53A8C6F0
-P 6100 6200
-F 0 "C12" H 6150 6300 50  0000 L CNN
-F 1 "10U" H 6150 6100 50  0000 L CNN
-F 2 "ipc_capc:IPC_CAPC2012X140N" H 6100 6200 60  0001 C CNN
-F 3 "" H 6100 6200 60  0000 C CNN
-F 4 "Murata" H 6100 6200 60  0001 C CNN "Mfr"
-F 5 "GRM21BR61A106KE19" H 6100 6200 60  0001 C CNN "Part"
-	1    6100 6200
-	-1   0    0    -1  
-$EndComp
-$Comp
-L C C8
-U 1 1 53A8C6F6
-P 5300 6200
-F 0 "C8" H 5350 6300 50  0000 L CNN
-F 1 "10U" H 5350 6100 50  0000 L CNN
-F 2 "ipc_capc:IPC_CAPC2012X140N" H 5300 6200 60  0001 C CNN
-F 3 "" H 5300 6200 60  0000 C CNN
-F 4 "Murata" H 5300 6200 60  0001 C CNN "Mfr"
-F 5 "GRM21BR61A106KE19" H 5300 6200 60  0001 C CNN "Part"
-	1    5300 6200
-	-1   0    0    -1  
-$EndComp
-$Comp
-L GND #PWR019
-U 1 1 53A8C6FC
-P 6100 6500
-F 0 "#PWR019" H 6100 6500 30  0001 C CNN
-F 1 "GND" H 6100 6430 30  0001 C CNN
-F 2 "" H 6100 6500 60  0000 C CNN
-F 3 "" H 6100 6500 60  0000 C CNN
-	1    6100 6500
-	1    0    0    -1  
-$EndComp
-$Comp
-L GND #PWR020
-U 1 1 53A8C702
-P 4900 6500
-F 0 "#PWR020" H 4900 6500 30  0001 C CNN
-F 1 "GND" H 4900 6430 30  0001 C CNN
-F 2 "" H 4900 6500 60  0000 C CNN
-F 3 "" H 4900 6500 60  0000 C CNN
-	1    4900 6500
-	1    0    0    -1  
-$EndComp
-$Comp
-L C C9
-U 1 1 53A8C708
-P 5300 7100
-F 0 "C9" H 5350 7200 50  0000 L CNN
-F 1 "10U" H 5350 7000 50  0000 L CNN
-F 2 "ipc_capc:IPC_CAPC2012X140N" H 5300 7100 60  0001 C CNN
-F 3 "" H 5300 7100 60  0000 C CNN
-F 4 "Murata" H 5300 7100 60  0001 C CNN "Mfr"
-F 5 "GRM21BR61A106KE19" H 5300 7100 60  0001 C CNN "Part"
-	1    5300 7100
-	-1   0    0    -1  
-$EndComp
-$Comp
-L C C7
-U 1 1 53A8C70E
-P 4900 7100
-F 0 "C7" H 4950 7200 50  0000 L CNN
-F 1 "10U" H 4950 7000 50  0000 L CNN
-F 2 "ipc_capc:IPC_CAPC2012X140N" H 4900 7100 60  0001 C CNN
-F 3 "" H 4900 7100 60  0000 C CNN
-F 4 "Murata" H 4900 7100 60  0001 C CNN "Mfr"
-F 5 "GRM21BR61A106KE19" H 4900 7100 60  0001 C CNN "Part"
-	1    4900 7100
-	-1   0    0    -1  
-$EndComp
-$Comp
-L GND #PWR021
-U 1 1 53A8C714
-P 6100 7400
-F 0 "#PWR021" H 6100 7400 30  0001 C CNN
-F 1 "GND" H 6100 7330 30  0001 C CNN
-F 2 "" H 6100 7400 60  0000 C CNN
-F 3 "" H 6100 7400 60  0000 C CNN
-	1    6100 7400
-	1    0    0    -1  
-$EndComp
-$Comp
-L GND #PWR022
-U 1 1 53A8C71A
-P 5700 7400
-F 0 "#PWR022" H 5700 7400 30  0001 C CNN
-F 1 "GND" H 5700 7330 30  0001 C CNN
-F 2 "" H 5700 7400 60  0000 C CNN
-F 3 "" H 5700 7400 60  0000 C CNN
-	1    5700 7400
-	1    0    0    -1  
-$EndComp
-$Comp
-L C C13
-U 1 1 53A8C720
-P 6100 7100
-F 0 "C13" H 6150 7200 50  0000 L CNN
-F 1 "10U" H 6150 7000 50  0000 L CNN
-F 2 "ipc_capc:IPC_CAPC2012X140N" H 6100 7100 60  0001 C CNN
-F 3 "" H 6100 7100 60  0000 C CNN
-F 4 "Murata" H 6100 7100 60  0001 C CNN "Mfr"
-F 5 "GRM21BR61A106KE19" H 6100 7100 60  0001 C CNN "Part"
-	1    6100 7100
-	-1   0    0    -1  
-$EndComp
-$Comp
-L GND #PWR023
-U 1 1 53A8C726
-P 4900 7400
-F 0 "#PWR023" H 4900 7400 30  0001 C CNN
-F 1 "GND" H 4900 7330 30  0001 C CNN
-F 2 "" H 4900 7400 60  0000 C CNN
-F 3 "" H 4900 7400 60  0000 C CNN
-	1    4900 7400
-	1    0    0    -1  
-$EndComp
-$Comp
-L C C11
-U 1 1 53A8C72C
-P 5700 7100
-F 0 "C11" H 5750 7200 50  0000 L CNN
-F 1 "10U" H 5750 7000 50  0000 L CNN
-F 2 "ipc_capc:IPC_CAPC2012X140N" H 5700 7100 60  0001 C CNN
-F 3 "" H 5700 7100 60  0000 C CNN
-F 4 "Murata" H 5700 7100 60  0001 C CNN "Mfr"
-F 5 "GRM21BR61A106KE19" H 5700 7100 60  0001 C CNN "Part"
-	1    5700 7100
-	-1   0    0    -1  
-$EndComp
-$Comp
-L GND #PWR024
-U 1 1 53A8C732
-P 5300 7400
-F 0 "#PWR024" H 5300 7400 30  0001 C CNN
-F 1 "GND" H 5300 7330 30  0001 C CNN
-F 2 "" H 5300 7400 60  0000 C CNN
-F 3 "" H 5300 7400 60  0000 C CNN
-	1    5300 7400
-	1    0    0    -1  
-$EndComp
-Text Label 3400 4400 0    60   ~ 0
-VMID
-$Comp
-L +3.3V #PWR025
-U 1 1 53A8C7B9
-P 3100 6700
-F 0 "#PWR025" H 3100 6660 30  0001 C CNN
-F 1 "+3.3V" H 3100 6810 30  0000 C CNN
-F 2 "" H 3100 6700 60  0000 C CNN
-F 3 "" H 3100 6700 60  0000 C CNN
-	1    3100 6700
-	1    0    0    -1  
-$EndComp
-Text Notes 1100 5300 0    60   ~ 0
-I2C Addresses on HackRF I2C bus (I2C0?):\n\n0b1100000: Si5351C-B\n0b0011010: WM8731 audio codec (CSB=0)
-Text Label 2300 1300 0    60   ~ 0
-I2S0_SCK_R
-Text Label 2300 1100 0    60   ~ 0
-I2S0_TX_SDA_R
-Text Label 2300 1400 0    60   ~ 0
-I2S0_MCLK_R
-Text Label 2300 1200 0    60   ~ 0
-I2S0_WS_R
-Text Label 5700 5900 0    60   ~ 0
-MICBIAS
-Text Label 5000 5900 0    60   ~ 0
-VMID
-Text HLabel 1700 1300 0    60   Input ~ 0
-I2S0_SCK
-Text HLabel 1700 1100 0    60   Input ~ 0
-I2S0_TX_SDA
-Text HLabel 1700 1400 0    60   Input ~ 0
-I2S0_MCLK
-Text HLabel 1700 1200 0    60   Input ~ 0
-I2S0_WS
-Text HLabel 3600 3600 2    60   Input ~ 0
-SCL
-Text HLabel 3600 3700 2    60   BiDi ~ 0
-SDA
-Text HLabel 1700 3700 0    60   Output ~ 0
-I2S0_RX_SDA
-$Comp
-L RPACK4 RP1
-U 1 1 53AB09AD
-P 2000 1250
-F 0 "RP1" H 2000 1500 60  0000 C CNN
-F 1 "220R" H 2000 1000 60  0000 C CNN
-F 2 "ipc_resc:IPC_RESCAXS80P160X320X60-8N" H 2000 1250 60  0001 C CNN
-F 3 "" H 2000 1250 60  0000 C CNN
-F 4 "Panasonic" H 2000 1250 60  0001 C CNN "Mfr"
-F 5 "EXB-38V221JV" H 2000 1250 60  0001 C CNN "Part"
-	1    2000 1250
-	1    0    0    -1  
-$EndComp
-Wire Wire Line
-	9300 4300 9300 4400
-Wire Wire Line
-	9400 4300 9300 4300
-Wire Wire Line
-	9000 4900 9000 5000
-Wire Wire Line
-	9000 4200 9000 4400
-Wire Wire Line
-	9400 4200 9000 4200
-Wire Wire Line
-	9000 3700 8900 3700
-Wire Wire Line
-	9000 3800 9000 3700
-Wire Wire Line
-	9400 3800 9000 3800
-Wire Wire Line
-	8900 4100 9400 4100
-Wire Wire Line
-	8700 5600 9400 5600
-Connection ~ 9300 5600
-Connection ~ 8800 5600
-Wire Wire Line
-	9300 4900 9300 5700
-Wire Wire Line
-	9300 6200 9300 6300
-Wire Wire Line
-	8800 6100 8800 6200
-Wire Wire Line
-	8800 5600 8800 5700
-Wire Wire Line
-	8200 5600 8300 5600
-Wire Wire Line
-	7700 5600 7200 5600
-Wire Wire Line
-	9900 5600 10400 5600
-Wire Wire Line
-	8300 4600 8300 4700
-Wire Wire Line
-	8300 3200 8300 3100
-Connection ~ 8000 3700
-Connection ~ 8000 4100
-Wire Wire Line
-	6900 4100 7500 4100
-Wire Wire Line
-	6900 3700 7500 3700
-Wire Wire Line
-	8000 4700 8000 4800
-Wire Wire Line
-	8000 3000 8000 3100
-Wire Wire Line
-	8000 4100 8000 4200
-Wire Wire Line
-	7900 4100 8400 4100
-Wire Wire Line
-	8000 3700 8000 3600
-Wire Wire Line
-	7900 3700 8400 3700
-Wire Wire Line
-	1900 3700 1700 3700
-Wire Wire Line
-	4900 6400 4900 6500
-Wire Wire Line
-	6100 6400 6100 6500
-Wire Wire Line
-	6100 5900 6100 6000
-Wire Wire Line
-	4900 5900 4900 6000
-Connection ~ 3400 3800
-Wire Wire Line
-	3400 3900 3400 3800
-Wire Wire Line
-	3300 3800 3500 3800
-Wire Wire Line
-	3300 3900 3400 3900
-Wire Wire Line
-	4100 4200 3300 4200
-Wire Wire Line
-	1100 4100 1900 4100
-Wire Wire Line
-	1100 4000 1900 4000
-Wire Wire Line
-	3300 3600 3600 3600
-Wire Wire Line
-	3300 3700 3600 3700
-Wire Wire Line
-	3300 3500 4100 3500
-Connection ~ 1800 3600
-Wire Wire Line
-	1100 3600 1900 3600
-Wire Wire Line
-	1800 3800 1800 3600
-Wire Wire Line
-	1900 3800 1800 3800
-Wire Wire Line
-	1100 3500 1900 3500
-Wire Wire Line
-	1100 3400 1900 3400
-Wire Wire Line
-	5700 6400 5700 6500
-Wire Wire Line
-	5300 6400 5300 6500
-Wire Wire Line
-	5700 5900 5700 6000
-Wire Wire Line
-	5300 5900 5300 6000
-Wire Wire Line
-	3300 4400 4100 4400
-Wire Wire Line
-	1800 3200 1900 3200
-Wire Wire Line
-	1800 3900 1900 3900
-Wire Wire Line
-	1900 4200 1800 4200
-Wire Wire Line
-	1800 4500 1900 4500
-Wire Wire Line
-	3300 4500 3400 4500
-Wire Wire Line
-	3300 3300 3500 3300
-Wire Wire Line
-	3300 3200 3400 3200
-Wire Wire Line
-	3100 1100 2200 1100
-Wire Wire Line
-	3100 1200 2200 1200
-Wire Wire Line
-	3100 1300 2200 1300
-Wire Wire Line
-	3100 1400 2200 1400
-Wire Wire Line
-	1700 1100 1800 1100
-Wire Wire Line
-	1700 1200 1800 1200
-Wire Wire Line
-	1700 1300 1800 1300
-Wire Wire Line
-	1700 1400 1800 1400
-Wire Wire Line
-	4300 7300 4300 7400
-Wire Wire Line
-	3900 7300 3900 7400
-Wire Wire Line
-	3500 7300 3500 7400
-Wire Wire Line
-	3100 7300 3100 7400
-Wire Wire Line
-	4900 7300 4900 7400
-Wire Wire Line
-	5300 7300 5300 7400
-Wire Wire Line
-	5700 7300 5700 7400
-Wire Wire Line
-	6100 7300 6100 7400
-Wire Wire Line
-	5700 5900 6100 5900
-Wire Wire Line
-	3300 4300 4100 4300
-Wire Wire Line
-	4900 5900 5300 5900
-Wire Wire Line
-	8300 4100 8300 4200
-Connection ~ 8300 4100
-Wire Wire Line
-	8300 3600 8300 3700
-Connection ~ 8300 3700
-NoConn ~ 9400 3900
-NoConn ~ 9400 4000
-Wire Wire Line
-	3100 6700 3100 6900
-Wire Wire Line
-	3100 6800 6100 6800
-Wire Wire Line
-	3500 6800 3500 6900
-Connection ~ 3100 6800
-Wire Wire Line
-	3900 6800 3900 6900
-Connection ~ 3500 6800
-Wire Wire Line
-	4300 6800 4300 6900
-Connection ~ 3900 6800
-Wire Wire Line
-	4900 6800 4900 6900
-Connection ~ 4300 6800
-Wire Wire Line
-	5300 6800 5300 6900
-Connection ~ 4900 6800
-Wire Wire Line
-	5700 6800 5700 6900
-Connection ~ 5300 6800
-Wire Wire Line
-	6100 6800 6100 6900
-Connection ~ 5700 6800
-$Comp
-L +3.3V #PWR026
-U 1 1 53BC2346
-P 3500 3300
-F 0 "#PWR026" H 3500 3260 30  0001 C CNN
-F 1 "+3.3V" H 3500 3410 30  0000 C CNN
-F 2 "" H 3500 3300 60  0000 C CNN
-F 3 "" H 3500 3300 60  0000 C CNN
-	1    3500 3300
-	0    1    1    0   
-$EndComp
-$Comp
-L +3.3V #PWR027
-U 1 1 53BC2351
-P 1800 3200
-F 0 "#PWR027" H 1800 3160 30  0001 C CNN
-F 1 "+3.3V" H 1800 3310 30  0000 C CNN
-F 2 "" H 1800 3200 60  0000 C CNN
-F 3 "" H 1800 3200 60  0000 C CNN
-	1    1800 3200
-	0    -1   -1   0   
-$EndComp
-$Comp
-L +3.3V #PWR028
-U 1 1 53BC235C
-P 1800 3900
-F 0 "#PWR028" H 1800 3860 30  0001 C CNN
-F 1 "+3.3V" H 1800 4010 30  0000 C CNN
-F 2 "" H 1800 3900 60  0000 C CNN
-F 3 "" H 1800 3900 60  0000 C CNN
-	1    1800 3900
-	0    -1   -1   0   
-$EndComp
-$Comp
-L +3.3V #PWR029
-U 1 1 53BC2367
-P 1800 4500
-F 0 "#PWR029" H 1800 4460 30  0001 C CNN
-F 1 "+3.3V" H 1800 4610 30  0000 C CNN
-F 2 "" H 1800 4500 60  0000 C CNN
-F 3 "" H 1800 4500 60  0000 C CNN
-	1    1800 4500
-	0    -1   -1   0   
-$EndComp
-NoConn ~ 3300 4000
-NoConn ~ 3300 4100
-NoConn ~ 1900 4300
-NoConn ~ 1900 4400
-$EndSCHEMATC

hardware/portapack_h1/case/pp_h1_case_2.scad

@@ -1,80 +0,0 @@
-use <pp_h1_shell.scad>
-//use <pp_h1_holes.scad>
-use <pp_h1_stack.scad>
-include <pp_h1_parameters.scad>
-
-module case() {
-    difference() {
-        if( case_radiused ) {
-            case_outer_volume_radiused();
-        } else {
-            case_outer_volume_squared();
-        }
-        
-        union() {
-            if( case_radiused ) {
-                case_bottom_void_tool_volume_ball();
-            } else {
-                case_bottom_void_tool_volume_end();
-            }
-            
-            case_pcb_plane_void_tool_volume();
-            pcb_attach_drills_volume();
-            case_bumpers_emboss();
-            translate([0, 0, h1_pcb_thickness]) portapack_h1_stack_drills();
-        }
-    }
-}
-
-/* Cross section */
-module case_cross_section() {
-    difference() {
-        case();
-        translate([70, -10, -10]) cube([100, 100, 100]);
-    }
-}
-
-module case_and_h1() {
-    case();
-    translate([0, 0, h1_pcb_thickness]) hackrf_one();
-}
-
-module case_and_stack() {
-    case();
-    translate([0, 0, h1_pcb_thickness]) portapack_h1_stack();
-}
-
-module stack_case_interference() {
-    intersection() {
-        case();
-        translate([0, 0, h1_pcb_thickness]) portapack_h1_stack();
-    }
-}
-
-module stack_stack_interference() {
-    // Ensure stack and spacers do not interfere.
-    intersection() {
-        union() {
-            portapack_h1_stack_hackrf_one();
-            portapack_h1_stack_portapack();
-        }
-        portapack_h1_stack_spacers();
-    }
-    
-    // Ensure screws do not interfere with stack.
-    intersection() {
-        union() {
-            portapack_h1_stack_hackrf_one();
-            portapack_h1_stack_spacers();
-            portapack_h1_stack_portapack();
-        }
-        portapack_h1_stack_screws();
-    }
-}
-
-case();
-//case_and_h1();
-//case_and_stack();
-//case_cross_section();
-//stack_case_interference();
-//stack_stack_interference();

hardware/portapack_h1/case/pp_h1_parameters.scad

@@ -1,64 +0,0 @@
-pcb_l = 120;
-pcb_w = 75;
-pcb_corner_r = 4;
-pcb_hole_r = 3.2 / 2;
-pcb_hole_pad_r = 5.6 / 2;
-
-h1_pcb_thickness = 1.64;
-pp_h1_pcb_thickness = 1.56;
-
-spacer_height = 0.5 * 25.4;
-
-bolt_drill_d = 3.0;
-pcb_attach_drills_depth = 4.0;
-
-pcb_case_clearance = 0.5;
-case_thickness = 1.5;
-case_bottom_thickness = case_thickness * 2;
-h1_pcb_bottom_clearance = 4.0;
-case_bottom_tool_r = 3.0;
-case_lid_thickness = 0.125 * 25.4;
-
-case_height_above_datum = h1_pcb_thickness + spacer_height + pp_h1_pcb_thickness + case_lid_thickness;
-case_height_below_datum = case_bottom_thickness + h1_pcb_bottom_clearance;
-case_height = case_height_below_datum + case_height_above_datum;
-
-attach_foot_r = pcb_hole_pad_r;
-attach_drill_r = bolt_drill_d / 2.0;
-
-case_bumper_d = 0.5 * 25.4;
-case_bumper_clearance = 0.5;
-case_bumper_emboss_depth = 1.0;
-
-case_radiused = true;
-
-case_bumper_inset_from_pcb_edge = case_radiused ? 10.0 : 8.0;
-
-mounting_drills = [
-    [4, 4],
-    [66, pcb_w - 4],
-    [116, 4],
-    [4, pcb_w - 4],
-    [71, pcb_w - 44],
-    [116, pcb_w - 4]
-];
-
-module pcb_extents() {
-    square([pcb_l, pcb_w]);
-}
-
-module pcb_outline() {
-    minkowski() {
-        offset(r=-pcb_corner_r) {
-            pcb_extents();
-        }
-        circle(r=pcb_corner_r);
-    }
-}
-
-module pcb_outline_clearance() {
-    minkowski() {
-        pcb_outline();
-        circle(r=pcb_case_clearance);
-    }
-}

hardware/portapack_h1/case/pp_h1_shell.scad

@@ -1,152 +0,0 @@
-include <pp_h1_parameters.scad>
-
-$fs=0.1;
-
-module attach_corner() {
-    circle(attach_foot_r);
-    polygon([[-10, -10],[attach_foot_r, -10],[attach_foot_r, 0],[0, attach_foot_r],[-10, attach_foot_r]]);
-}
-
-module attach_side() {
-    circle(attach_foot_r);
-    translate([0, -attach_foot_r]) square([10, attach_foot_r * 2]);
-}
-
-module attach_center() {
-    circle(attach_foot_r);
-}
-
-module pcb_supports() {
-    translate(mounting_drills[0]) attach_corner();
-    translate(mounting_drills[1]) rotate(90) attach_side();
-    translate(mounting_drills[2]) rotate(90) attach_corner();
-    translate(mounting_drills[3]) rotate(270) attach_corner();
-    translate(mounting_drills[4]) attach_center();
-    translate(mounting_drills[5]) rotate(180) attach_corner();
-}
-
-module pcb_attach_drill_outline() {
-    circle(r=attach_drill_r);
-}
-
-module pcb_attach_drills_outline() {
-    for(p = mounting_drills) {
-        translate(p) pcb_attach_drill_outline();
-    }
-}
-
-module pcb_attach_drills_volume() {
-    translate([0, 0, -pcb_attach_drills_depth]) linear_extrude(height=30) {
-        pcb_attach_drills_outline();
-    }
-}
-
-module case_bottom_void_edge() {
-    // Edge of PCB, plus case clearance, minus board supports.
-    difference() {
-        pcb_outline_clearance();
-        pcb_supports();
-    }
-}
-
-module case_bottom_void_tool_path() {
-    // Tool path to cut bottom of case.
-    offset(r=-case_bottom_tool_r) {
-        case_bottom_void_edge();
-    }
-}
-
-module case_bottom_void_tool_volume_ball() {
-    $fs=2;
-    $fn=18;
-    // Tool cut volume for bottom of case.
-    // Z=0 at bottom plane of H1 PCB
-    translate([0, 0, -h1_pcb_bottom_clearance + case_bottom_tool_r]) minkowski() {
-        linear_extrude(height=50, convexity=10) {
-            case_bottom_void_tool_path();
-        }
-        sphere(r=case_bottom_tool_r);
-    }
-}
-
-module case_outer_volume_radiused() {
-    $fs=2;
-    $fn=18;
-    tool_r = case_bottom_tool_r + case_thickness;
-    tz = h1_pcb_bottom_clearance + case_bottom_thickness - tool_r;
-    difference() {
-        // Rounded volume
-        translate([0, 0, -tz]) {
-            minkowski() {
-                linear_extrude(height=30, convexity=10) {
-                    offset(r=-case_bottom_tool_r) {
-                        pcb_outline_clearance();
-                    }
-                }
-                sphere(r=tool_r);
-            }
-        }
-        
-        // Cut off the top.
-        translate([-10, -10, case_height_above_datum]) cube([200, 200, 200]);
-    }
-}
-
-module case_bottom_void_tool_volume_end() {
-    // Tool cut volume for bottom of case.
-    // Z=0 at bottom plane of H1 PCB
-    translate([0, 0, -h1_pcb_bottom_clearance]) {
-        linear_extrude(height=50) {
-            minkowski() {
-                case_bottom_void_tool_path();
-                circle(r=case_bottom_tool_r);
-            }
-        }
-    }
-}
-
-module case_bumper_emboss_outline() {
-    circle(r=case_bumper_d / 2 + case_bumper_clearance);
-}
-
-module case_bumper_emboss_tool() {
-    height = 10;
-    translate([0, 0, -height]) linear_extrude(height=height) {
-        case_bumper_emboss_outline();
-    }
-}
-
-module case_bumpers_emboss() {
-    tz = case_height_below_datum - case_bumper_emboss_depth;
-    translate([0, 0, -tz]) {
-        translate([case_bumper_inset_from_pcb_edge, case_bumper_inset_from_pcb_edge, 0]) case_bumper_emboss_tool();
-        translate([pcb_l - case_bumper_inset_from_pcb_edge, case_bumper_inset_from_pcb_edge, 0]) case_bumper_emboss_tool();
-        translate([case_bumper_inset_from_pcb_edge, pcb_w - case_bumper_inset_from_pcb_edge, 0]) case_bumper_emboss_tool();
-        translate([pcb_l - case_bumper_inset_from_pcb_edge, pcb_w - case_bumper_inset_from_pcb_edge, 0]) case_bumper_emboss_tool();
-    }
-}
-
-module case_pcb_plane_void_tool_edge() {
-    offset(r=-pcb_corner_r) {
-        pcb_outline_clearance();
-    }
-}
-
-module case_pcb_plane_void_tool_volume() {
-    linear_extrude(height=30, convexity=10) {
-        minkowski() {
-            case_pcb_plane_void_tool_edge();
-            circle(r=pcb_corner_r);
-        }
-    }
-}
-
-module case_outer_volume_squared() {
-    t = case_bottom_thickness + h1_pcb_bottom_clearance;
-    translate([0, 0, -t]) linear_extrude(height=t + case_height_above_datum) {
-        minkowski() {
-            pcb_outline();
-            circle(r=pcb_case_clearance + case_thickness);
-        }
-    }
-}

hardware/portapack_h1/case/pp_h1_stack.scad

@@ -1,846 +0,0 @@
-include <pp_h1_parameters.scad>
-
-$fs=0.1;
-
-module pcb_mounting_hole_drill() {
-    circle(r=pcb_hole_r);
-}
-
-module pcb_mounting_hole_drills() {
-    translate([ 64, 104]) pcb_mounting_hole_drill();
-    translate([126, 104]) pcb_mounting_hole_drill();
-    translate([176, 104]) pcb_mounting_hole_drill();
-    translate([ 64, 171]) pcb_mounting_hole_drill();
-    translate([131, 144]) pcb_mounting_hole_drill();
-    translate([176, 171]) pcb_mounting_hole_drill();
-}
-
-////////////////////////////////////////////////////////
-
-module pcb_cutout_antenna_pos() {
-    x = 61.5;
-    y1 = 154.75;
-    y2 = 167.25;
-    r = 1.5;
-    minkowski() {
-        polygon(
-            points=[[x+8,y1-4],[x,y1-4],[x,y1],[x+4,y1],[x+4,y2],[x,y2],[x,y2+4],[x+8,y2+4]]
-        );
-        circle(r=r);
-    };
-}
-
-module pcb_cutout_antenna_neg_curve() {
-    x = 59.5;
-    y1 = 157;
-    y2 = 165;
-    r = 1.5;
-    minkowski() {
-        polygon(
-            points=[[x-2,y1],[x,y1],[x,y2],[x-2,y2]]
-        );
-        circle(r=r);
-    };
-}
-
-module pcb_cutout_antenna_neg() {
-    x = 60.5;
-    y1 = 157;
-    y2 = 165;
-    w = -4;
-    union() {
-        polygon(
-            points=[[x+w,y1-3],[x,y1-3],[x,y2+3],[x+w,y2+3]]
-        );
-        pcb_cutout_antenna_neg_curve();
-    }
-}
-
-module pcb_cutout_antenna() {
-    difference() {
-        pcb_cutout_antenna_neg();
-        pcb_cutout_antenna_pos();
-    }
-}
-
-////////////////////////////////////////////////////////
-
-module pcb_cutout_clocks_pos() {
-    x = 178.5;
-    y1 = 138.75;
-    y2 = 169.25;
-    r = 1.5;
-    w = 8;
-    w2 = 4;
-    minkowski() {
-        polygon(
-            points=[[x-w,y1-4],[x,y1-4],[x,y1],[x-w2,y1],[x-w2,y2],[x,y2],[x,y2+4],[x-w,y2+4]]
-        );
-        circle(r=r);
-    };
-}
-
-module pcb_cutout_clock_neg_curve() {
-    x = 180.5;
-    y1 = 141;
-    y2 = 167;
-    r = 1.5;
-    w = 2;
-    minkowski() {
-        polygon(
-            points=[[x,y1],[x+w,y1],[x+w,y2],[x,y2]]
-        );
-        circle(r=r);
-    };
-}
-
-module pcb_cutout_clocks_neg() {
-    x = 179.5;
-    y1 = 141;
-    y2 = 167;
-    w = 6;
-    union() {
-        polygon(
-            points=[[x,y1-3],[x+w,y1-3],[x+w,y2+3],[x,y2+3]]
-        );
-        pcb_cutout_clock_neg_curve();
-    }
-}
-
-module pcb_cutout_clocks() {
-    difference() {
-        pcb_cutout_clocks_neg();
-        pcb_cutout_clocks_pos();
-    }
-}
-
-////////////////////////////////////////////////////////
-
-bulkhead_w = 6.35;
-bulkhead_h = 6.35;
-bulkhead_thickness = 1.02;
-
-barrel_d = 6.2;
-barrel_clip_d = 5.5;
-barrel_l = 12.45 - bulkhead_thickness;
-
-barrel_r = barrel_d / 2;
-barrel_clip_r = barrel_clip_d / 2;
-
-peg_l = 3.81;
-peg_w = 1.02;
-peg_bottom_h = 0.76;
-peg_top_h = 1.27;
-peg_space = 1.78;
-
-module sma_73251_2120_pegs() {
-    peg_top_ty = bulkhead_h/2 - peg_bottom_h - peg_space - peg_top_h;
-    linear_extrude(height=peg_l)
-    {
-    translate([-bulkhead_w/2, peg_top_ty])
-        square([peg_w, peg_top_h]);
-    translate([bulkhead_w/2 - peg_w, peg_top_ty])
-        square([peg_w, peg_top_h]);
-    translate([-bulkhead_w/2, bulkhead_h/2 - peg_bottom_h])
-        square([peg_w, peg_bottom_h]);
-    translate([bulkhead_w/2 - peg_w, bulkhead_h/2 - peg_bottom_h])
-        square([peg_w, peg_bottom_h]);
-    }
-}
-
-module sma_73251_2120_barrel_outline_circle() {
-    circle(r=barrel_r);
-}
-
-module sma_73251_2120_barrel_outline() {
-    intersection() {
-        sma_73251_2120_barrel_outline_circle();
-        square([barrel_clip_d, barrel_d + 1], center=true);
-    }
-}
-
-module sma_73251_2120_barrel() {
-    linear_extrude(height=barrel_l) {
-        sma_73251_2120_barrel_outline();
-    }
-}
-
-module sma_73251_2120_bulkhead() {
-    linear_extrude(height=bulkhead_thickness) {
-        square([bulkhead_w, bulkhead_h], center=true);
-    }
-}
-
-module sma_73251_2120_union() {
-    union() {
-        translate([0, 0, -peg_l]) sma_73251_2120_pegs();
-        sma_73251_2120_bulkhead();
-        translate([0, 0, bulkhead_thickness]) sma_73251_2120_barrel();
-    }
-}
-/*
-module sma_73251_2120() {
-    ty = bulkhead_h/2 - peg_bottom_h - peg_space/2;
-    rotate([90, 0, 0]) translate([0, -ty, 0]) {
-        union() {
-            translate([0, 0, -peg_l]) sma_73251_2120_pegs();
-            sma_73251_2120_bulkhead();
-            translate([0, 0, bulkhead_thickness]) sma_73251_2120_barrel();
-        }
-    }
-}
-*/
-module sma_73251_2120_orient(board_thickness) {
-    // Align so that top surface of bottom peg is at z=0 (bottom of PCB).
-    t = peg_top_h / 2 + (peg_space - board_thickness) / 2;
-    translate([0, 0, -t]) rotate([90, 0, -90]) {
-        children();
-    }
-}
-
-module sma_73251_2120(refdes, board_thickness) {
-    sma_73251_2120_orient(board_thickness) {
-        sma_73251_2120_union();
-    }
-}
-
-module sma_73251_2120_drill(tolerance, board_thickness) {
-    sma_73251_2120_orient(board_thickness) {
-        linear_extrude(height=30) {
-            minkowski() {
-                sma_73251_2120_barrel_outline_circle();
-                circle(r=tolerance);
-            }
-        }
-    }
-}
-
-////////////////////////////////////////////////////////
-
-module led(refdes, c) {
-    rotate(90) translate([-0.25, -2.15/2, -0.60]) {
-        color("gray") linear_extrude(height=0.60) {
-            square([0.50, 2.15]);
-            translate([0, 2.15/2]) circle(r=0.5);
-        }
-    }
-}
-
-module led_drill() {
-    hole_diameter = 2;
-
-    translate([0, -0.25, -0.3]) {
-        rotate([90, 0, 0]) {
-            cylinder(d=hole_diameter, h=10);
-        }
-    }
-}
-
-////////////////////////////////////////////////////////
-
-module sw_outline() {
-    circle(d=3.51, center=true);
-}
-
-sw_a = 3.25;
-sw_l = 5.85;
-sw_tz = sw_l - sw_a;
-
-sw_large_hole_spacing = 7.01;
-sw_large_hole_diameter = 1.30;
-sw_small_hole_spacing = 4.50;
-sw_small_hole_diameter = 0.99;
-sw_large_small_hole_spacing = 2.49;
-sw_pin_length_below_datum = 3.51;
-
-sw_button_z_offset = 4.01;
-
-module sw() {
-    rotate([180, 0, 90]) {
-        rotate([90, 0, 0]) {
-            translate([0, 4.01, sw_tz]) {
-                color("gray") translate([-7.11/2, -sw_button_z_offset, -3.68]) linear_extrude(height=3.68) square([7.11, 7.01]);
-                color("blue") linear_extrude(height=sw_a) sw_outline();
-            }
-        }
-        
-        rotate([180, 0, 180]) linear_extrude(height=sw_pin_length_below_datum) {
-            translate([-sw_large_hole_spacing/2, sw_large_small_hole_spacing]) circle(d=sw_large_hole_diameter);
-            translate([ sw_large_hole_spacing/2, sw_large_small_hole_spacing]) circle(d=sw_large_hole_diameter);
-            translate([-sw_small_hole_spacing/2, 0]) circle(d=sw_small_hole_diameter);
-            translate([ sw_small_hole_spacing/2, 0]) circle(d=sw_small_hole_diameter);
-        }
-    }
-}
-
-module sw_drill(clearance) {
-    translate([0, 0, -sw_button_z_offset]) {
-        rotate([0, -90, 0]) {
-            linear_extrude(h=10) {
-                minkowski() {
-                    sw_outline();
-                    circle(r=clearance);
-                }
-            }
-        }
-    }
-}
-
-////////////////////////////////////////////////////////
-
-module header_x2(nx, b) {
-    ny = 2;
-    
-    w = 5.08;
-    d = 8.50;
-    
-    pin_spacing_x = 2.54;
-    pin_spacing_y = 2.54;
-    pin_d = 1.02;
-    pin_length = 3.2;
-    
-    rotate([180, 0, 0]) {
-        color("gray") translate([-b/2, -w/2, 0]) linear_extrude(height=d) square([b, w]);
-        
-        pin_tx = nx * pin_spacing_x / -2;
-        pin_ty = ny * pin_spacing_y / -2;
-        translate([pin_tx, pin_ty]) {
-            for(y = [1 : ny]) {
-                for(x = [1 : nx]) {
-                    tx = (x - 0.5) * pin_spacing_x;
-                    ty = (y - 0.5) * pin_spacing_y;
-                    translate([tx, ty]) {
-                        rotate([180, 0]) {
-                            linear_extrude(height=pin_length) {
-                                circle(d=pin_d);
-                            }
-                        }
-                    }
-                }
-            }
-        }
-    }
-}
-
-module header_11x2() {
-    nx = 11;
-    b = 28.44;
-    header_x2(nx, b);
-}
-
-module header_13x2() {
-    nx = 13;
-    b = 33.52;
-    header_x2(nx, b);
-}
-
-////////////////////////////////////////////////////////
-
-module usb_plug_poly() {
-    inner_w1 = 6.9;
-    inner_h1 = 1.1;
-    inner_h = 1.85;
-    inner_w2 = 5.4;
-    inner_dw = inner_w1 - inner_w2;
-    
-    translate([-inner_w1/2, 0])
-        polygon(points=[
-            [0, 0],
-            [inner_w1, 0],
-            [inner_w1, inner_h1],
-            [inner_w1 - inner_dw/2, inner_h],
-            [inner_dw/2, inner_h],
-            [0, inner_h1]
-        ]);
-}
-
-module usb_body_outline() {
-    body_buffer_r = 0.3;
-
-    translate([0, body_buffer_r]) {
-        minkowski() {
-            usb_plug_poly();
-            circle(r=body_buffer_r);
-        }
-    }
-}
-
-module usb_plug_outline() {
-    outer_h = 3;
-    outer_ty = (outer_h - 2.45) / 2;
-    outer_buffer_r = 0.6;
-
-    translate([0, outer_ty]) {
-        minkowski() {
-            usb_plug_poly();
-            circle(r=outer_buffer_r);
-        }
-    }
-}
-
-usb_body_h = 2.45;
-usb_body_depth = 5.0;
-
-//usb_outer_w1 = 8;
-usb_outer_depth = 0.63;
-
-module usb_transform() {
-    rotate([90, 180, 270]) translate([0, 0, -usb_outer_depth - 2.15 + 1.65]) children();
-}
-
-module usb() {    
-    color("lightgray") usb_transform() {
-        translate([0, 0, usb_outer_depth]) {
-            linear_extrude(height=usb_body_depth) {
-                usb_body_outline();
-            }
-        }
-
-        linear_extrude(height=usb_outer_depth) {
-            usb_plug_outline();
-        }
-    }
-}
-
-module usb_drill(clearance) {
-    usb_transform() {
-        translate([0, 0, -usb_outer_depth - 10]) {
-            linear_extrude(height=20) {
-                minkowski() {
-                    usb_plug_outline();
-                    circle(r=clearance);
-                }
-            }
-        }
-    }
-}
-
-////////////////////////////////////////////////////////
-
-module pcb_outline() {
-    minkowski() {
-        polygon(
-            points=[[64,104], [176,104], [176,171], [64,171]]
-        );
-        circle(r=pcb_corner_r);
-    }
-}
-
-module pcb_shape() {
-    difference() {
-        pcb_outline();
-        pcb_cutout_antenna();
-        pcb_cutout_clocks();
-        pcb_mounting_hole_drills();
-    }
-}
-
-////////////////////////////////////////////////////////
-
-module hackrf_one_components() {
-    color("green") linear_extrude(height=h1_pcb_thickness) pcb_shape();
-
-    translate([ 61.00, 161.00]) rotate(  0) sma_73251_2120("p4" , h1_pcb_thickness);
-    translate([179.00, 145.00]) rotate(180) sma_73251_2120("p2" , h1_pcb_thickness);
-    translate([179.00, 163.00]) rotate(180) sma_73251_2120("p16", h1_pcb_thickness);
-
-    translate([ 61.00, 117.90]) rotate(-90) led("d7", "green");
-    translate([ 61.27, 130.55]) rotate(-90) led("d8", "yellow");
-    translate([ 61.27, 135.12]) rotate(-90) led("d2", "red");
-    translate([ 61.27, 139.69]) rotate(-90) led("d4", "green");
-    translate([ 61.27, 144.27]) rotate(-90) led("d5", "yellow");
-    translate([ 61.27, 148.84]) rotate(-90) led("d6", "red");
-
-    translate([ 62.70, 111.40]) sw();
-    translate([ 62.70, 124.40]) sw();
-
-    translate([171.76, 143.25]) rotate([0, 0,  90]) header_11x2("p20");
-    translate([152.71, 164.84]) rotate([0, 0, 180]) header_13x2("p22");
-    translate([123.50, 143.25]) rotate([0, 0,  90]) header_11x2("p28");
-
-    translate([180.00, 124.00]) usb();
-}
-
-module hackrf_one_transform() {
-    rotate([180, 0, 0]) translate([-60, -100 - pcb_w])
-        children();
-}
-
-module hackrf_one() {
-    hackrf_one_transform() hackrf_one_components();
-}
-
-////////////////////////////////////////////////////////
-
-module spacer() {
-    outer_d = 0.25 * 25.4;
-    inner_d = 0.140 * 25.4;
-    
-    //inner_d = ?
-    rotate([0, 180, 0]) {
-        color("lightgray") {
-            difference() {
-                linear_extrude(height=spacer_height) {
-                    circle(d=outer_d);
-                }
-                translate([0, 0, -0.5]) {
-                    linear_extrude(height=spacer_height + 1) {
-                        circle(d=inner_d);
-                    }
-                }
-            }
-        }
-    }
-}
-
-module screw() {
-    wrench_sides = 6;
-    wrench_diameter = 2.0 / cos(360 / wrench_sides / 2);
-    
-    head_height = 2.0;
-    head_d = 5.5;
-    
-    shaft_length = 20.0;
-    threaded_d = 3.0;
-    
-    color("gray") {
-        translate([0, 0, -head_height]) difference() {
-            linear_extrude(height=head_height)
-                circle(d=head_d);
-            translate([0, 0, -0.5]) linear_extrude(height=head_height + 1)
-                circle(d=wrench_diameter, $fn=wrench_sides);
-        }
-        linear_extrude(height=shaft_length)
-            circle(d=threaded_d);
-    }
-}
-
-////////////////////////////////////////////////////////
-
-module header_mle_dual(name, nx) {
-    w = nx * 2.54;
-    h = 5;
-    d = 2.54;
-    offset = 3.81 - d;
-    
-    base_h = 7.44;
-    
-    translate([-w/2, -h/2, offset]) {
-        color("gray") linear_extrude(height=d) square([w, h]);
-    }
-    translate([-w/2, -base_h/2]) {
-        color("lightgray") {
-            linear_extrude(height=offset) square([w, base_h]);
-        }
-    }
-}
-
-module lcd_kingtech() {
-    body_w = 42.72;
-    body_h = 60.26;
-    body_d = 2.50;
-    
-    touch_d = 0.7;
-    
-    tape_d = 0.1;
-    
-    view_w = 36.72;
-    view_h = 48.96;
-    view_tx = (body_w - view_w) / 2;
-    view_ty = 1.25 + 2.95;
-    
-    tab_w = 0.7;
-    tab_h = 2.5;
-    tab_d = 0.9;
-    tab_tz = body_d - tab_d;
-    tab_bot_ty = body_h - tab_h;
-    
-    translate([-body_w / 2, -view_ty - view_h/2, -(body_d + touch_d)]) {
-        translate([0, 0, touch_d]) {
-            color("beige") difference() {
-                linear_extrude(height=body_d) {
-                    square([body_w, body_h]);
-                }
-                
-                translate([view_tx, view_ty, -1]) {
-                    linear_extrude(height=2) {
-                        square([view_w, view_h]);
-                    }
-                }
-            }
-
-            color("beige") translate([0, 0, tab_tz]) {
-                linear_extrude(height=tab_d) {
-                    translate([-tab_w, 0]) square([tab_w, tab_h]);
-                    translate([-tab_w, tab_bot_ty]) square([tab_w, tab_h]);
-                    translate([body_w, 0]) square([tab_w, tab_h]);
-                    translate([body_w, tab_bot_ty]) square([tab_w, tab_h]);
-                }
-            }
-
-            color("black") translate([view_tx, view_ty]) {
-                linear_extrude(height=1) {
-                    square([view_w, view_h]);
-                }
-            }
-        }
-        
-        color("lightgray", alpha=0.5) {
-            linear_extrude(height=touch_d) {
-                square([body_w, body_h]);
-            }
-        }
-    }
-}
-
-module control_wheel() {
-    h = 6.0;
-    
-    top_d = 32.0;
-    top_h = 3.0;
-    
-    ring_d = 34.4;
-    ring_h = 0.2;
-    
-    bot_d = ring_d;
-    bot_h = h - ring_h - top_h;
-    
-    translate([0, 0, -h])
-        color("white")
-            linear_extrude(height=top_h)
-                circle(d=top_d);
-    
-    translate([0, 0, -(h - top_h)])
-        color("white")
-            linear_extrude(height=ring_h)
-                circle(d=ring_d);
-    
-    translate([0, 0, -(h - top_h - ring_h)])
-        color("black")
-            linear_extrude(height=bot_h)
-                circle(d=bot_d);
-}
-
-module audio_jack_hole() {
-    hole_outer_d = 5.00;
-
-    circle(d=hole_outer_d);
-}
-
-audio_jack_body_w = 6.00;
-audio_jack_body_h = 5.00;
-audio_jack_body_depth = 15.5;
-
-audio_jack_hole_inner_d = 3.600;
-audio_jack_hole_depth = 1.5;
-
-audio_jack_mounting_offset = 7;
-
-module audio_jack() {
-    color("gray") rotate([90, 0, 0]) {
-        translate([0, audio_jack_body_h/2, -audio_jack_hole_depth - audio_jack_mounting_offset]) {
-            translate([0, 0, audio_jack_hole_depth])
-                linear_extrude(height=audio_jack_body_depth)
-                    square([audio_jack_body_w, audio_jack_body_h], center=true);
-            difference() {
-                linear_extrude(height=audio_jack_hole_depth)
-                    audio_jack_hole();
-                translate([0, 0, -0.5])
-                    linear_extrude(height=audio_jack_hole_depth + 1)
-                        circle(d=audio_jack_hole_inner_d);
-            }
-        }
-    }
-}
-
-module audio_jack_drill(diameter) {
-    translate([0, audio_jack_mounting_offset, audio_jack_body_h/2]) {
-        rotate([-90, 0, 0]) {
-            linear_extrude(height=10) {
-                circle(r=diameter / 2.0);
-            }
-        }
-    }
-}
-
-micro_sd_body_h = 1.32;
-micro_sd_body_w = 13.825;
-micro_sd_body_depth = 15.25;
-
-micro_sd_card_w = 11.0;
-micro_sd_card_h = 1.0;
-micro_sd_card_depth = 15.0;
-
-micro_sd_card_tx = 0.9;
-micro_sd_card_ty = (micro_sd_body_h - micro_sd_card_h) / 2;
-micro_sd_card_insert_depth = micro_sd_card_depth - 2.3;
-
-micro_sd_card_eject_depth = micro_sd_card_depth - (2.3 + 3.3);
-
-module micro_sd() {
-    translate([-micro_sd_body_w/2, -micro_sd_body_depth/2]) {
-        rotate([90, 0, 0]) {
-            color("lightgray") difference() {
-                translate([0, 0, -micro_sd_body_depth])
-                    linear_extrude(height=micro_sd_body_depth)
-                        square([micro_sd_body_w, micro_sd_body_h]);
-                translate([micro_sd_card_tx, micro_sd_card_ty, -micro_sd_card_insert_depth])
-                    linear_extrude(height=micro_sd_card_depth)
-                        square([micro_sd_card_w, micro_sd_card_h]);
-            }
-
-            color("black")
-                translate([micro_sd_card_tx, micro_sd_card_ty, -micro_sd_card_eject_depth])
-                    linear_extrude(height=micro_sd_card_depth)
-                        square([micro_sd_card_w, micro_sd_card_h]);
-        }
-    }
-}
-
-module micro_sd_drill(clearance) {
-    extra_width = 2;
-    translate([-micro_sd_body_w/2, 0]) {
-        rotate([90, 0, 0]) {
-            translate([micro_sd_card_tx - clearance - extra_width, micro_sd_card_ty - clearance, micro_sd_body_depth/2]) {
-                cube([micro_sd_card_w + 2 * clearance + extra_width, micro_sd_card_h + 2 * clearance, 10]);
-            }
-        }
-    }
-}
-
-////////////////////////////////////////////////////////
-
-module portapack_h1_pcb_mounting_hole_drills() {
-    translate([ 64, 104]) pcb_mounting_hole_drill();
-    translate([126, 104]) pcb_mounting_hole_drill();
-    translate([176, 104]) pcb_mounting_hole_drill();
-    translate([ 64, 171]) pcb_mounting_hole_drill();
-    translate([176, 171]) pcb_mounting_hole_drill();
-}
-
-module portapack_h1_pcb_shape() {
-    difference() {
-        pcb_outline();
-        portapack_h1_pcb_mounting_hole_drills();
-    }
-}
-
-module portapack_h1_pcb() {
-    color("green") linear_extrude(height=pp_h1_pcb_thickness) {
-        portapack_h1_pcb_shape();
-    }
-}
-
-module portapack_h1_components_top() {
-    translate([ 94.83, 137.50]) rotate(90) lcd_kingtech();
-    translate([147.50, 137.50]) control_wheel();
-}
-
-module portapack_h1_components_bottom() {
-    translate([0, 0, pp_h1_pcb_thickness])  {
-        translate([171.76, 143.25]) rotate( 90) header_mle_dual("p20", 11);
-        translate([152.71, 164.84]) rotate(180) header_mle_dual("p22", 13);
-        translate([123.50, 143.25]) rotate( 90) header_mle_dual("p28", 11);
-        translate([172.10, 114.80]) rotate(270) audio_jack();
-        translate([ 68.40, 114.60]) rotate(270) micro_sd();
-    }
-}
-
-module portapack_h1_assembly() {
-    portapack_h1_pcb();
-    portapack_h1_components_top();
-    portapack_h1_components_bottom();
-}
-
-module portapack_h1_transform() {
-    rotate([180, 0, 0]) translate([-60, -100 - pcb_w])
-        children();
-}
-
-module portapack_h1() {
-    portapack_h1_transform() portapack_h1_assembly();
-}
-
-////////////////////////////////////////////////////////
-
-module slot() {
-    hull() {
-        children();
-        translate([0, 0, -20]) children();
-    }
-}
-
-module portapack_h1_drills() {
-    micro_sd_clearance = 0.5;
-    audio_jack_hole_diameter = 7.0;  // 6.5mm + 0.25mm clearance.
-
-    portapack_h1_transform() {
-        translate([172.10, 114.80, pp_h1_pcb_thickness]) rotate(270) audio_jack_drill(audio_jack_hole_diameter);
-        slot() translate([ 68.40, 114.60, pp_h1_pcb_thickness]) rotate(270) micro_sd_drill(micro_sd_clearance);
-    }
-}
-
-module hackrf_one_drills() {
-    clearance = 0.5;
-    sw_clearance = 0.6;
-
-    hackrf_one_transform() {
-        slot() translate([ 61.00, 161.00]) rotate(  0) sma_73251_2120_drill(clearance, h1_pcb_thickness);
-        translate([179.00, 145.00]) rotate(180) sma_73251_2120_drill(clearance, h1_pcb_thickness);
-        translate([179.00, 163.00]) rotate(180) sma_73251_2120_drill(clearance, h1_pcb_thickness);
-
-        translate([ 61.00, 117.90]) rotate(-90) led_drill();
-        translate([ 61.27, 130.55]) rotate(-90) led_drill();
-        translate([ 61.27, 135.12]) rotate(-90) led_drill();
-        translate([ 61.27, 139.69]) rotate(-90) led_drill();
-        translate([ 61.27, 144.27]) rotate(-90) led_drill();
-        translate([ 61.27, 148.84]) rotate(-90) led_drill();
-
-        slot() translate([ 62.70, 111.40]) sw_drill(sw_clearance);
-        slot() translate([ 62.70, 124.40]) sw_drill(sw_clearance);
-
-        translate([180.00, 124.00]) usb_drill(clearance);
-    }
-}
-
-module portapack_h1_stack_hackrf_one() {
-    hackrf_one();
-}
-
-module portapack_h1_stack_spacers() {
-    hackrf_one_transform() {
-        translate([ 64, 104]) spacer();
-        translate([126, 104]) spacer();
-        translate([176, 104]) spacer();
-        translate([ 64, 171]) spacer();
-        translate([176, 171]) spacer();
-    }    
-}
-
-module portapack_h1_stack_portapack() {
-    translate([0, 0, spacer_height + pp_h1_pcb_thickness]) portapack_h1();
-}
-
-module portapack_h1_stack_screws() {
-    screw_tz = spacer_height + pp_h1_pcb_thickness;
-    translate([0, 0, screw_tz]) portapack_h1_transform() {
-        translate([ 64, 104]) screw();
-        translate([126, 104]) screw();
-        translate([176, 104]) screw();
-        translate([ 64, 171]) screw();
-        translate([176, 171]) screw();
-    }
-}
-
-module portapack_h1_stack() {
-    portapack_h1_stack_hackrf_one();
-    portapack_h1_stack_spacers();
-    portapack_h1_stack_portapack();
-    portapack_h1_stack_screws();
-}
-
-module portapack_h1_stack_drills() {
-    hackrf_one_drills();
-
-    translate([0, 0, spacer_height + pp_h1_pcb_thickness]) portapack_h1_drills();
-}

hardware/portapack_h1/cpld/portapack_h1_cpld.qpf

@@ -1,30 +0,0 @@
-# -------------------------------------------------------------------------- #
-#
-# Copyright (C) 1991-2014 Altera Corporation
-# Your use of Altera Corporation's design tools, logic functions 
-# and other software and tools, and its AMPP partner logic 
-# functions, and any output files from any of the foregoing 
-# (including device programming or simulation files), and any 
-# associated documentation or information are expressly subject 
-# to the terms and conditions of the Altera Program License 
-# Subscription Agreement, Altera MegaCore Function License 
-# Agreement, or other applicable license agreement, including, 
-# without limitation, that your use is for the sole purpose of 
-# programming logic devices manufactured by Altera and sold by 
-# Altera or its authorized distributors.  Please refer to the 
-# applicable agreement for further details.
-#
-# -------------------------------------------------------------------------- #
-#
-# Quartus II 32-bit
-# Version 13.1.4 Build 182 03/12/2014 SJ Web Edition
-# Date created = 21:24:55  April 29, 2014
-#
-# -------------------------------------------------------------------------- #
-
-QUARTUS_VERSION = "13.1"
-DATE = "21:24:55  April 29, 2014"
-
-# Revisions
-
-PROJECT_REVISION = "portapack_h1_cpld"

hardware/portapack_h1/cpld/portapack_h1_cpld.qsf

@@ -1,288 +0,0 @@
-# -------------------------------------------------------------------------- #
-#
-# Copyright (C) 1991-2014 Altera Corporation
-# Your use of Altera Corporation's design tools, logic functions 
-# and other software and tools, and its AMPP partner logic 
-# functions, and any output files from any of the foregoing 
-# (including device programming or simulation files), and any 
-# associated documentation or information are expressly subject 
-# to the terms and conditions of the Altera Program License 
-# Subscription Agreement, Altera MegaCore Function License 
-# Agreement, or other applicable license agreement, including, 
-# without limitation, that your use is for the sole purpose of 
-# programming logic devices manufactured by Altera and sold by 
-# Altera or its authorized distributors.  Please refer to the 
-# applicable agreement for further details.
-#
-# -------------------------------------------------------------------------- #
-#
-# Quartus II 32-bit
-# Version 13.1.4 Build 182 03/12/2014 SJ Web Edition
-# Date created = 21:24:55  April 29, 2014
-#
-# -------------------------------------------------------------------------- #
-#
-# Notes:
-#
-# 1) The default values for assignments are stored in the file:
-#		portapack_h1_cpld_assignment_defaults.qdf
-#    If this file doesn't exist, see file:
-#		assignment_defaults.qdf
-#
-# 2) Altera recommends that you do not modify this file. This
-#    file is updated automatically by the Quartus II software
-#    and any changes you make may be lost or overwritten.
-#
-# -------------------------------------------------------------------------- #
-
-
-set_global_assignment -name FAMILY "MAX V"
-set_global_assignment -name DEVICE 5M40ZE64C5
-set_global_assignment -name TOP_LEVEL_ENTITY top
-set_global_assignment -name ORIGINAL_QUARTUS_VERSION 13.1
-set_global_assignment -name PROJECT_CREATION_TIME_DATE "21:24:55  APRIL 29, 2014"
-set_global_assignment -name LAST_QUARTUS_VERSION 14.1.0
-set_global_assignment -name PROJECT_OUTPUT_DIRECTORY output_files
-set_global_assignment -name MIN_CORE_JUNCTION_TEMP 0
-set_global_assignment -name MAX_CORE_JUNCTION_TEMP 85
-set_global_assignment -name DEVICE_FILTER_PACKAGE EQFP
-set_global_assignment -name DEVICE_FILTER_PIN_COUNT 64
-set_global_assignment -name ERROR_CHECK_FREQUENCY_DIVISOR "-1"
-set_global_assignment -name EDA_SIMULATION_TOOL "ModelSim-Altera (VHDL)"
-set_global_assignment -name EDA_NETLIST_WRITER_OUTPUT_DIR simulation/modelsim -section_id eda_simulation
-set_global_assignment -name EDA_OUTPUT_DATA_FORMAT VHDL -section_id eda_simulation
-set_global_assignment -name VHDL_INPUT_VERSION VHDL_2008
-set_global_assignment -name VHDL_SHOW_LMF_MAPPING_MESSAGES OFF
-set_global_assignment -name SDC_FILE portapack_h1_cpld.sdc
-set_global_assignment -name VHDL_FILE top.vhd
-set_global_assignment -name STRATIX_DEVICE_IO_STANDARD "3.3-V LVCMOS"
-set_location_assignment PIN_46 -to LCD_DB[15]
-set_location_assignment PIN_47 -to LCD_DB[14]
-set_location_assignment PIN_48 -to LCD_DB[13]
-set_location_assignment PIN_49 -to LCD_DB[12]
-set_location_assignment PIN_50 -to LCD_DB[11]
-set_location_assignment PIN_51 -to LCD_DB[10]
-set_location_assignment PIN_52 -to LCD_DB[9]
-set_location_assignment PIN_53 -to LCD_DB[8]
-set_location_assignment PIN_54 -to LCD_DB[7]
-set_location_assignment PIN_55 -to LCD_DB[6]
-set_location_assignment PIN_56 -to LCD_DB[5]
-set_location_assignment PIN_58 -to LCD_DB[4]
-set_location_assignment PIN_59 -to LCD_DB[3]
-set_location_assignment PIN_60 -to LCD_DB[2]
-set_location_assignment PIN_61 -to LCD_DB[1]
-set_location_assignment PIN_62 -to LCD_DB[0]
-set_location_assignment PIN_44 -to LCD_RDX
-set_location_assignment PIN_43 -to LCD_RS
-set_location_assignment PIN_63 -to LCD_TE
-set_location_assignment PIN_45 -to LCD_WRX
-set_location_assignment PIN_10 -to SW_D
-set_location_assignment PIN_28 -to SW_L
-set_location_assignment PIN_9 -to SW_R
-set_location_assignment PIN_11 -to SW_ROT_A
-set_location_assignment PIN_12 -to SW_ROT_B
-set_location_assignment PIN_13 -to SW_SEL
-set_location_assignment PIN_25 -to SW_U
-set_location_assignment PIN_1 -to TP_D
-set_location_assignment PIN_2 -to TP_L
-set_location_assignment PIN_64 -to TP_R
-set_location_assignment PIN_3 -to TP_U
-set_instance_assignment -name IO_STANDARD "3.3V SCHMITT TRIGGER INPUT" -to SW_D
-set_instance_assignment -name IO_STANDARD "3.3V SCHMITT TRIGGER INPUT" -to SW_L
-set_instance_assignment -name IO_STANDARD "3.3V SCHMITT TRIGGER INPUT" -to SW_R
-set_instance_assignment -name IO_STANDARD "3.3V SCHMITT TRIGGER INPUT" -to SW_ROT_A
-set_instance_assignment -name IO_STANDARD "3.3V SCHMITT TRIGGER INPUT" -to SW_ROT_B
-set_instance_assignment -name IO_STANDARD "3.3V SCHMITT TRIGGER INPUT" -to SW_SEL
-set_instance_assignment -name IO_STANDARD "3.3V SCHMITT TRIGGER INPUT" -to SW_U
-set_instance_assignment -name IO_STANDARD "3.3-V LVCMOS" -to TP_D
-set_instance_assignment -name IO_STANDARD "3.3-V LVCMOS" -to TP_L
-set_instance_assignment -name IO_STANDARD "3.3-V LVCMOS" -to TP_R
-set_instance_assignment -name IO_STANDARD "3.3-V LVCMOS" -to TP_U
-set_instance_assignment -name IO_STANDARD "1.8 V" -to LCD_DB[15]
-set_instance_assignment -name IO_STANDARD "1.8 V" -to LCD_DB[14]
-set_instance_assignment -name IO_STANDARD "1.8 V" -to LCD_DB[13]
-set_instance_assignment -name IO_STANDARD "1.8 V" -to LCD_DB[12]
-set_instance_assignment -name IO_STANDARD "1.8 V" -to LCD_DB[11]
-set_instance_assignment -name IO_STANDARD "1.8 V" -to LCD_DB[10]
-set_instance_assignment -name IO_STANDARD "1.8 V" -to LCD_DB[9]
-set_instance_assignment -name IO_STANDARD "1.8 V" -to LCD_DB[8]
-set_instance_assignment -name IO_STANDARD "1.8 V" -to LCD_DB[7]
-set_instance_assignment -name IO_STANDARD "1.8 V" -to LCD_DB[6]
-set_instance_assignment -name IO_STANDARD "1.8 V" -to LCD_DB[5]
-set_instance_assignment -name IO_STANDARD "1.8 V" -to LCD_DB[4]
-set_instance_assignment -name IO_STANDARD "1.8 V" -to LCD_DB[3]
-set_instance_assignment -name IO_STANDARD "1.8 V" -to LCD_DB[2]
-set_instance_assignment -name IO_STANDARD "1.8 V" -to LCD_DB[1]
-set_instance_assignment -name IO_STANDARD "1.8 V" -to LCD_DB[0]
-set_instance_assignment -name IO_STANDARD "1.8 V" -to LCD_RDX
-set_instance_assignment -name IO_STANDARD "1.8 V" -to LCD_RS
-set_instance_assignment -name IO_STANDARD "1.8 V" -to LCD_TE
-set_instance_assignment -name IO_STANDARD "1.8 V" -to LCD_WRX
-set_global_assignment -name EDA_TEST_BENCH_ENABLE_STATUS TEST_BENCH_MODE -section_id eda_simulation
-set_global_assignment -name EDA_NATIVELINK_SIMULATION_TEST_BENCH top_tb -section_id eda_simulation
-set_global_assignment -name EDA_TEST_BENCH_NAME top_tb -section_id eda_simulation
-set_global_assignment -name EDA_DESIGN_INSTANCE_NAME uut -section_id top_tb
-set_global_assignment -name EDA_TEST_BENCH_MODULE_NAME top_tb -section_id top_tb
-set_global_assignment -name POWER_PRESET_COOLING_SOLUTION "NO HEAT SINK WITH STILL AIR"
-set_global_assignment -name EDA_TEST_BENCH_RUN_SIM_FOR "500 ns" -section_id top_tb
-set_global_assignment -name EDA_TEST_BENCH_FILE top_tb.vhd -section_id top_tb
-set_global_assignment -name EDA_BOARD_DESIGN_BOUNDARY_SCAN_TOOL "BSDL (Boundary Scan)"
-set_global_assignment -name EDA_NETLIST_WRITER_OUTPUT_DIR /home/jboone/src/portapack/portapack_hackrf/hardware/portapack_h1/cpld -section_id eda_board_design_boundary_scan
-set_global_assignment -name EDA_BOARD_BOUNDARY_SCAN_OPERATION POST_CONFIG -section_id eda_board_design_boundary_scan
-set_global_assignment -name AUTO_RESTART_CONFIGURATION OFF
-set_global_assignment -name ENABLE_CONFIGURATION_PINS OFF
-set_global_assignment -name ENABLE_NCE_PIN OFF
-set_global_assignment -name ENABLE_BOOT_SEL_PIN OFF
-set_global_assignment -name USE_CONFIGURATION_DEVICE ON
-set_global_assignment -name GENERATE_RBF_FILE OFF
-set_global_assignment -name GENERATE_SVF_FILE ON
-set_global_assignment -name RESERVE_ALL_UNUSED_PINS "AS INPUT TRI-STATED WITH BUS-HOLD"
-set_location_assignment PIN_38 -to LCD_RESETX
-set_instance_assignment -name IO_STANDARD "1.8 V" -to LCD_RESETX
-set_location_assignment PIN_18 -to MCU_D[7]
-set_location_assignment PIN_19 -to MCU_D[6]
-set_location_assignment PIN_21 -to MCU_D[5]
-set_location_assignment PIN_20 -to MCU_D[4]
-set_location_assignment PIN_22 -to MCU_D[3]
-set_location_assignment PIN_24 -to MCU_D[2]
-set_location_assignment PIN_27 -to MCU_D[1]
-set_location_assignment PIN_26 -to MCU_D[0]
-set_location_assignment PIN_33 -to MCU_ADDR
-set_location_assignment PIN_42 -to MCU_DIR
-set_instance_assignment -name IO_STANDARD "3.3-V LVCMOS" -to MCU_ADDR
-set_instance_assignment -name IO_STANDARD "3.3-V LVCMOS" -to MCU_D[7]
-set_instance_assignment -name IO_STANDARD "3.3-V LVCMOS" -to MCU_D[6]
-set_instance_assignment -name IO_STANDARD "3.3-V LVCMOS" -to MCU_D[5]
-set_instance_assignment -name IO_STANDARD "3.3-V LVCMOS" -to MCU_D[4]
-set_instance_assignment -name IO_STANDARD "3.3-V LVCMOS" -to MCU_D[3]
-set_instance_assignment -name IO_STANDARD "3.3-V LVCMOS" -to MCU_D[2]
-set_instance_assignment -name IO_STANDARD "3.3-V LVCMOS" -to MCU_D[1]
-set_instance_assignment -name IO_STANDARD "3.3-V LVCMOS" -to MCU_D[0]
-set_instance_assignment -name IO_STANDARD "3.3-V LVCMOS" -to MCU_DIR
-set_instance_assignment -name WEAK_PULL_UP_RESISTOR ON -to SW_D
-set_instance_assignment -name WEAK_PULL_UP_RESISTOR ON -to SW_L
-set_instance_assignment -name WEAK_PULL_UP_RESISTOR ON -to SW_R
-set_instance_assignment -name WEAK_PULL_UP_RESISTOR ON -to SW_U
-set_instance_assignment -name WEAK_PULL_UP_RESISTOR ON -to SW_ROT_B
-set_instance_assignment -name WEAK_PULL_UP_RESISTOR ON -to SW_SEL
-set_instance_assignment -name WEAK_PULL_UP_RESISTOR ON -to SW_ROT_A
-set_instance_assignment -name CURRENT_STRENGTH_NEW "MINIMUM CURRENT" -to LCD_DB[15]
-set_instance_assignment -name CURRENT_STRENGTH_NEW "MINIMUM CURRENT" -to LCD_DB[14]
-set_instance_assignment -name CURRENT_STRENGTH_NEW "MINIMUM CURRENT" -to LCD_DB[13]
-set_instance_assignment -name CURRENT_STRENGTH_NEW "MINIMUM CURRENT" -to LCD_DB[12]
-set_instance_assignment -name CURRENT_STRENGTH_NEW "MINIMUM CURRENT" -to LCD_DB[11]
-set_instance_assignment -name CURRENT_STRENGTH_NEW "MINIMUM CURRENT" -to LCD_DB[10]
-set_instance_assignment -name CURRENT_STRENGTH_NEW "MINIMUM CURRENT" -to LCD_DB[9]
-set_instance_assignment -name CURRENT_STRENGTH_NEW "MINIMUM CURRENT" -to LCD_DB[8]
-set_instance_assignment -name CURRENT_STRENGTH_NEW "MINIMUM CURRENT" -to LCD_DB[7]
-set_instance_assignment -name CURRENT_STRENGTH_NEW "MINIMUM CURRENT" -to LCD_DB[6]
-set_instance_assignment -name CURRENT_STRENGTH_NEW "MINIMUM CURRENT" -to LCD_DB[5]
-set_instance_assignment -name CURRENT_STRENGTH_NEW "MINIMUM CURRENT" -to LCD_DB[4]
-set_instance_assignment -name CURRENT_STRENGTH_NEW "MINIMUM CURRENT" -to LCD_DB[3]
-set_instance_assignment -name CURRENT_STRENGTH_NEW "MINIMUM CURRENT" -to LCD_DB[2]
-set_instance_assignment -name CURRENT_STRENGTH_NEW "MINIMUM CURRENT" -to LCD_DB[1]
-set_instance_assignment -name CURRENT_STRENGTH_NEW "MINIMUM CURRENT" -to LCD_DB[0]
-set_instance_assignment -name CURRENT_STRENGTH_NEW "MINIMUM CURRENT" -to LCD_RDX
-set_instance_assignment -name CURRENT_STRENGTH_NEW "MINIMUM CURRENT" -to LCD_RESETX
-set_instance_assignment -name CURRENT_STRENGTH_NEW "MINIMUM CURRENT" -to LCD_RS
-set_instance_assignment -name CURRENT_STRENGTH_NEW "MINIMUM CURRENT" -to LCD_TE
-set_instance_assignment -name CURRENT_STRENGTH_NEW "MINIMUM CURRENT" -to LCD_WRX
-set_instance_assignment -name CURRENT_STRENGTH_NEW "MINIMUM CURRENT" -to MCU_ADDR
-set_instance_assignment -name CURRENT_STRENGTH_NEW "MINIMUM CURRENT" -to MCU_D[7]
-set_instance_assignment -name CURRENT_STRENGTH_NEW "MINIMUM CURRENT" -to MCU_D[6]
-set_instance_assignment -name CURRENT_STRENGTH_NEW "MINIMUM CURRENT" -to MCU_D[5]
-set_instance_assignment -name CURRENT_STRENGTH_NEW "MINIMUM CURRENT" -to MCU_D[4]
-set_instance_assignment -name CURRENT_STRENGTH_NEW "MINIMUM CURRENT" -to MCU_D[3]
-set_instance_assignment -name CURRENT_STRENGTH_NEW "MINIMUM CURRENT" -to MCU_D[2]
-set_instance_assignment -name CURRENT_STRENGTH_NEW "MINIMUM CURRENT" -to MCU_D[1]
-set_instance_assignment -name CURRENT_STRENGTH_NEW "MINIMUM CURRENT" -to MCU_D[0]
-set_instance_assignment -name CURRENT_STRENGTH_NEW "MINIMUM CURRENT" -to MCU_DIR
-set_instance_assignment -name CURRENT_STRENGTH_NEW "MINIMUM CURRENT" -to SW_D
-set_instance_assignment -name CURRENT_STRENGTH_NEW "MINIMUM CURRENT" -to SW_L
-set_instance_assignment -name CURRENT_STRENGTH_NEW "MINIMUM CURRENT" -to SW_R
-set_instance_assignment -name CURRENT_STRENGTH_NEW "MINIMUM CURRENT" -to SW_ROT_A
-set_instance_assignment -name CURRENT_STRENGTH_NEW "MINIMUM CURRENT" -to SW_ROT_B
-set_instance_assignment -name CURRENT_STRENGTH_NEW "MINIMUM CURRENT" -to SW_SEL
-set_instance_assignment -name CURRENT_STRENGTH_NEW "MINIMUM CURRENT" -to SW_U
-set_instance_assignment -name CURRENT_STRENGTH_NEW "MAXIMUM CURRENT" -to TP_D
-set_instance_assignment -name CURRENT_STRENGTH_NEW "MAXIMUM CURRENT" -to TP_L
-set_instance_assignment -name CURRENT_STRENGTH_NEW "MAXIMUM CURRENT" -to TP_R
-set_instance_assignment -name CURRENT_STRENGTH_NEW "MAXIMUM CURRENT" -to TP_U
-set_instance_assignment -name SLOW_SLEW_RATE ON -to LCD_DB[15]
-set_instance_assignment -name SLOW_SLEW_RATE ON -to LCD_DB[14]
-set_instance_assignment -name SLOW_SLEW_RATE ON -to LCD_DB[13]
-set_instance_assignment -name SLOW_SLEW_RATE ON -to LCD_DB[12]
-set_instance_assignment -name SLOW_SLEW_RATE ON -to LCD_DB[11]
-set_instance_assignment -name SLOW_SLEW_RATE ON -to LCD_DB[10]
-set_instance_assignment -name SLOW_SLEW_RATE ON -to LCD_DB[9]
-set_instance_assignment -name SLOW_SLEW_RATE ON -to LCD_DB[8]
-set_instance_assignment -name SLOW_SLEW_RATE ON -to LCD_DB[7]
-set_instance_assignment -name SLOW_SLEW_RATE ON -to LCD_DB[6]
-set_instance_assignment -name SLOW_SLEW_RATE ON -to LCD_DB[5]
-set_instance_assignment -name SLOW_SLEW_RATE ON -to LCD_DB[4]
-set_instance_assignment -name SLOW_SLEW_RATE ON -to LCD_DB[3]
-set_instance_assignment -name SLOW_SLEW_RATE ON -to LCD_DB[2]
-set_instance_assignment -name SLOW_SLEW_RATE ON -to LCD_DB[1]
-set_instance_assignment -name SLOW_SLEW_RATE ON -to LCD_DB[0]
-set_instance_assignment -name SLOW_SLEW_RATE ON -to LCD_RDX
-set_instance_assignment -name SLOW_SLEW_RATE ON -to LCD_RESETX
-set_instance_assignment -name SLOW_SLEW_RATE ON -to LCD_RS
-set_instance_assignment -name SLOW_SLEW_RATE ON -to LCD_TE
-set_instance_assignment -name SLOW_SLEW_RATE ON -to LCD_WRX
-set_instance_assignment -name SLOW_SLEW_RATE ON -to MCU_ADDR
-set_instance_assignment -name SLOW_SLEW_RATE ON -to MCU_D[7]
-set_instance_assignment -name SLOW_SLEW_RATE ON -to MCU_D[6]
-set_instance_assignment -name SLOW_SLEW_RATE ON -to MCU_D[5]
-set_instance_assignment -name SLOW_SLEW_RATE ON -to MCU_D[4]
-set_instance_assignment -name SLOW_SLEW_RATE ON -to MCU_D[3]
-set_instance_assignment -name SLOW_SLEW_RATE ON -to MCU_D[2]
-set_instance_assignment -name SLOW_SLEW_RATE ON -to MCU_D[1]
-set_instance_assignment -name SLOW_SLEW_RATE ON -to MCU_D[0]
-set_instance_assignment -name SLOW_SLEW_RATE ON -to MCU_DIR
-set_instance_assignment -name SLOW_SLEW_RATE ON -to SW_D
-set_instance_assignment -name SLOW_SLEW_RATE ON -to SW_L
-set_instance_assignment -name SLOW_SLEW_RATE ON -to SW_R
-set_instance_assignment -name SLOW_SLEW_RATE ON -to SW_ROT_A
-set_instance_assignment -name SLOW_SLEW_RATE ON -to SW_ROT_B
-set_instance_assignment -name SLOW_SLEW_RATE ON -to SW_SEL
-set_instance_assignment -name SLOW_SLEW_RATE ON -to SW_U
-set_instance_assignment -name SLOW_SLEW_RATE ON -to TP_D
-set_instance_assignment -name SLOW_SLEW_RATE ON -to TP_L
-set_instance_assignment -name SLOW_SLEW_RATE ON -to TP_R
-set_instance_assignment -name SLOW_SLEW_RATE ON -to TP_U
-set_global_assignment -name ENABLE_DEVICE_WIDE_RESET ON
-set_global_assignment -name IOBANK_VCCIO 1.8V -section_id 2
-set_global_assignment -name IOBANK_VCCIO 3.3V -section_id 1
-set_instance_assignment -name PCI_IO OFF -to MCU_DIR
-set_global_assignment -name ALLOW_LVTTL_LVCMOS_INPUT_LEVELS_TO_OVERDRIVE_INPUT_BUFFER ON
-set_location_assignment PIN_4 -to LCD_BACKLIGHT
-set_instance_assignment -name IO_STANDARD "3.3-V LVCMOS" -to LCD_BACKLIGHT
-set_instance_assignment -name CURRENT_STRENGTH_NEW "MINIMUM CURRENT" -to LCD_BACKLIGHT
-set_instance_assignment -name SLOW_SLEW_RATE ON -to LCD_BACKLIGHT
-set_instance_assignment -name PCI_IO OFF -to LCD_BACKLIGHT
-set_location_assignment PIN_30 -to MCU_LCD_RD
-set_instance_assignment -name IO_STANDARD "3.3-V LVCMOS" -to MCU_LCD_RD
-set_instance_assignment -name CURRENT_STRENGTH_NEW "MINIMUM CURRENT" -to MCU_LCD_RD
-set_instance_assignment -name SLOW_SLEW_RATE ON -to MCU_LCD_RD
-set_location_assignment PIN_40 -to MCU_LCD_WR
-set_instance_assignment -name IO_STANDARD "3.3-V LVCMOS" -to MCU_LCD_WR
-set_instance_assignment -name CURRENT_STRENGTH_NEW "MINIMUM CURRENT" -to MCU_LCD_WR
-set_instance_assignment -name SLOW_SLEW_RATE ON -to MCU_LCD_WR
-set_instance_assignment -name PCI_IO OFF -to MCU_LCD_WR
-set_location_assignment PIN_32 -to MCU_IO_STBX
-set_instance_assignment -name IO_STANDARD "3.3-V LVCMOS" -to MCU_IO_STBX
-set_instance_assignment -name CURRENT_STRENGTH_NEW "MINIMUM CURRENT" -to MCU_IO_STBX
-set_instance_assignment -name SLOW_SLEW_RATE ON -to MCU_IO_STBX
-set_instance_assignment -name WEAK_PULL_UP_RESISTOR ON -to TP_R
-set_instance_assignment -name WEAK_PULL_UP_RESISTOR ON -to TP_D
-set_instance_assignment -name WEAK_PULL_UP_RESISTOR ON -to TP_L
-set_instance_assignment -name WEAK_PULL_UP_RESISTOR ON -to TP_U
-set_location_assignment PIN_31 -to MCU_LCD_TE
-set_instance_assignment -name IO_STANDARD "3.3-V LVCMOS" -to MCU_LCD_TE
-set_instance_assignment -name CURRENT_STRENGTH_NEW "MINIMUM CURRENT" -to MCU_LCD_TE
-set_instance_assignment -name SLOW_SLEW_RATE ON -to MCU_LCD_TE
-set_location_assignment PIN_34 -to MCU_P2_8
-set_instance_assignment -name IO_STANDARD "3.3-V LVCMOS" -to MCU_P2_8
-set_instance_assignment -name CURRENT_STRENGTH_NEW "MINIMUM CURRENT" -to MCU_P2_8
-set_instance_assignment -name SLOW_SLEW_RATE ON -to MCU_P2_8
-set_instance_assignment -name PCI_IO OFF -to MCU_P2_8

hardware/portapack_h1/cpld/portapack_h1_cpld.sdc

@@ -1,116 +0,0 @@
-## Generated SDC file "portapack_hackrf_one_cpld.sdc"
-
-## Copyright (C) 1991-2014 Altera Corporation
-## Your use of Altera Corporation's design tools, logic functions 
-## and other software and tools, and its AMPP partner logic 
-## functions, and any output files from any of the foregoing 
-## (including device programming or simulation files), and any 
-## associated documentation or information are expressly subject 
-## to the terms and conditions of the Altera Program License 
-## Subscription Agreement, Altera MegaCore Function License 
-## Agreement, or other applicable license agreement, including, 
-## without limitation, that your use is for the sole purpose of 
-## programming logic devices manufactured by Altera and sold by 
-## Altera or its authorized distributors.  Please refer to the 
-## applicable agreement for further details.
-
-
-## VENDOR  "Altera"
-## PROGRAM "Quartus II"
-## VERSION "Version 13.1.4 Build 182 03/12/2014 SJ Web Edition"
-
-## DATE    "Sat May  3 10:22:18 2014"
-
-##
-## DEVICE  "5M40ZE64C5"
-##
-
-# RS = 0, D = DB[15:8]
-#		wait max(tast = 0 ns, CPLD setup = ?)
-# WR = 0, D = DB[7:0]
-#		wait max(CPLD )
-
-#**************************************************************
-# Time Information
-#**************************************************************
-
-set_time_format -unit ns -decimal_places 3
-
-set mcu_clk_period 4.9
-
-set lcd_data_wr_setup 10.0
-set lcd_data_wr_hold 10.0
-
-#**************************************************************
-# Create Clock
-#**************************************************************
-
-create_clock -name {MCU_STROBE} -period 66.000 -waveform { 0.000 33.000 } [get_ports {MCU_STROBE}]
-#create_clock -name strobe_virt -period 66.000
-
-#**************************************************************
-# Create Generated Clock
-#**************************************************************
-
-
-
-#**************************************************************
-# Set Clock Latency
-#**************************************************************
-
-
-
-#**************************************************************
-# Set Clock Uncertainty
-#**************************************************************
-
-
-
-#**************************************************************
-# Set Input Delay
-#**************************************************************
-
-#set_input_delay -clock strobe_virt [get_ports {D[*]}]
-
-#**************************************************************
-# Set Output Delay
-#**************************************************************
-
-
-
-#**************************************************************
-# Set Clock Groups
-#**************************************************************
-
-
-
-#**************************************************************
-# Set False Path
-#**************************************************************
-
-set_false_path -from [get_clocks {MCU_STROBE}] -to [get_ports {TP_D TP_L TP_R TP_U}]
-set_false_path -from [get_ports {SW_D SW_L SW_R SW_ROT_A SW_ROT_B SW_SEL SW_U}] -to [get_ports {MCU_D[*]}]
-
-
-#**************************************************************
-# Set Multicycle Path
-#**************************************************************
-
-
-
-#**************************************************************
-# Set Maximum Delay
-#**************************************************************
-
-
-
-#**************************************************************
-# Set Minimum Delay
-#**************************************************************
-
-
-
-#**************************************************************
-# Set Input Transition
-#**************************************************************
-

hardware/portapack_h1/cpld/top.vhd

@@ -1,167 +0,0 @@
---
--- Copyright (C) 2012 Jared Boone, ShareBrained Technology, Inc.
---
--- This file is part of PortaPack.
---
--- This program is free software; you can redistribute it and/or modify
--- it under the terms of the GNU General Public License as published by
--- the Free Software Foundation; either version 2, or (at your option)
--- any later version.
---
--- This program is distributed in the hope that it will be useful,
--- but WITHOUT ANY WARRANTY; without even the implied warranty of
--- MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
--- GNU General Public License for more details.
---
--- You should have received a copy of the GNU General Public License
--- along with this program; see the file COPYING.  If not, write to
--- the Free Software Foundation, Inc., 51 Franklin Street,
--- Boston, MA 02110-1301, USA.
-
-library ieee;
-use ieee.std_logic_1164.all;
-
-entity top is
-	port (
-		MCU_D				:	inout	std_logic_vector(7 downto 0);
-		MCU_DIR			:	in		std_logic;
-		MCU_IO_STBX		:	in		std_logic;
-		MCU_LCD_WR		:	in		std_logic;
-		MCU_ADDR			:	in		std_logic;
-		MCU_LCD_TE		:	out	std_logic;
-		MCU_P2_8			:	in		std_logic;
-		MCU_LCD_RD		:	in		std_logic;
-		
-		TP_U				:	out	std_logic;
-		TP_D				:	out	std_logic;
-		TP_L				:	out	std_logic;
-		TP_R				:	out	std_logic;
-		
-		SW_SEL			:	in		std_logic;
-		SW_ROT_A			:	in		std_logic;
-		SW_ROT_B			:	in		std_logic;
-		SW_U				:	in		std_logic;
-		SW_D				:	in		std_logic;
-		SW_L				:	in		std_logic;
-		SW_R				:	in		std_logic;
-		
-		LCD_RESETX		:	out	std_logic;
-		LCD_RS			:	out	std_logic;
-		LCD_WRX			:	out	std_logic;
-		LCD_RDX			:	out	std_logic;
-		LCD_DB			:	inout	std_logic_vector(15 downto 0);
-		LCD_TE			:	in		std_logic;
-		LCD_BACKLIGHT	:	out	std_logic
-	);
-end top;
-
-architecture rtl of top is
-
-	signal	switches : std_logic_vector(7 downto 0);
-	
-	type data_direction_t is (from_mcu, to_mcu);
-	signal	data_dir	: data_direction_t;
-	
-	signal	mcu_data_out_lcd : std_logic_vector(7 downto 0);
-	signal	mcu_data_out_io : std_logic_vector(7 downto 0);
-	signal	mcu_data_out : std_logic_vector(7 downto 0);
-	signal	mcu_data_in	: std_logic_vector(7 downto 0);
-	
-	signal	lcd_data_in : std_logic_vector(15 downto 0);
-	signal  lcd_data_in_mux : std_logic_vector(7 downto 0);
-	signal	lcd_data_out : std_logic_vector(15 downto 0);
-	
-	signal  lcd_data_in_q : std_logic_vector(7 downto 0) := (others => '0');
-	signal  lcd_data_out_q : std_logic_vector(7 downto 0) := (others => '0');
-	
-	signal	tp_q : std_logic_vector(7 downto 0) := (others => '0');
-	
-	signal	lcd_reset_q : std_logic := '1';
-	signal	lcd_backlight_q : std_logic := '0';
-	
-	signal	dir_read : boolean;
-	signal	dir_write : boolean;
-	
-	signal	lcd_read_strobe : boolean;
-	signal	lcd_write_strobe : boolean;
-	signal	lcd_write : boolean;
-
-	signal	io_strobe : boolean;
-	signal	io_read_strobe : boolean;
-	signal	io_write_strobe : boolean;
-	
-begin
-
-	-- I/O data
-	switches <= LCD_TE & not SW_ROT_B & not SW_ROT_A & not SW_SEL & not SW_U & not SW_D & not SW_L & not SW_R;
-
-	TP_U <= tp_q(3) when tp_q(7) = '1' else 'Z';
-	TP_D <= tp_q(2) when tp_q(6) = '1' else 'Z';
-	TP_L <= tp_q(1) when tp_q(5) = '1' else 'Z';
-	TP_R <= tp_q(0) when tp_q(4) = '1' else 'Z';
-	
-	LCD_BACKLIGHT <= lcd_backlight_q;
-	
-	MCU_LCD_TE <= LCD_TE;
-	
-	-- State management
-	data_dir <= to_mcu when MCU_DIR = '1' else from_mcu;
-	dir_read <= (data_dir = to_mcu);
-	dir_write <= (data_dir = from_mcu);
-
-	io_strobe <= (MCU_IO_STBX = '0');
-	io_read_strobe <= io_strobe and dir_read;
-
-	lcd_read_strobe <= (MCU_LCD_RD = '1');
-	lcd_write <= not lcd_read_strobe;
-
-	-- LCD interface
-	LCD_RS <= MCU_ADDR;
-	LCD_RDX <= not MCU_LCD_RD;
-	LCD_WRX <= not MCU_LCD_WR;
-
-	lcd_data_out <= lcd_data_out_q & mcu_data_in;
-	lcd_data_in <= LCD_DB;
-	LCD_DB <= lcd_data_out when lcd_write else (others => 'Z');
-	
-	LCD_RESETX <= not lcd_reset_q;
-	
-	-- MCU interface
-	mcu_data_out_lcd <= lcd_data_in(15 downto 8) when lcd_read_strobe else lcd_data_in_q;
-	mcu_data_out_io <= switches;
-	mcu_data_out <= mcu_data_out_io when io_read_strobe else mcu_data_out_lcd;
-
-	mcu_data_in <= MCU_D;
-	MCU_D <= mcu_data_out when dir_read else (others => 'Z');
-	
-	-- Synchronous behaviors:
-	-- LCD write: Capture LCD high byte on LCD_WRX falling edge.
-	process(MCU_LCD_WR, mcu_data_in)
-	begin
-		if rising_edge(MCU_LCD_WR) then
-			lcd_data_out_q <= mcu_data_in;
-		end if;
-	end process;
-	
-	-- LCD read: Capture LCD low byte on LCD_RD falling edge.
-	process(MCU_LCD_RD, lcd_data_in)
-	begin
-		if falling_edge(MCU_LCD_RD) then
-			lcd_data_in_q <= lcd_data_in(7 downto 0);
-		end if;
-	end process;
-	
-	-- I/O write (to resistive touch panel): Capture data from
-	-- MCU and hold on TP pins until further notice.
-	process(MCU_IO_STBX, dir_write, mcu_data_in, MCU_ADDR)
-	begin
-		if rising_edge(MCU_IO_STBX) and dir_write then
-			if MCU_ADDR = '0' then
-				tp_q <= mcu_data_in;
-			else
-				lcd_reset_q <= mcu_data_in(0);
-				lcd_backlight_q <= mcu_data_in(7);
-			end if;
-		end if;
-	end process;
-end rtl;

hardware/portapack_h1/cpld/top_tb.vhd

@@ -1,185 +0,0 @@
---
--- Copyright (C) 2012 Jared Boone, ShareBrained Technology, Inc.
---
--- This file is part of PortaPack.
---
--- This program is free software; you can redistribute it and/or modify
--- it under the terms of the GNU General Public License as published by
--- the Free Software Foundation; either version 2, or (at your option)
--- any later version.
---
--- This program is distributed in the hope that it will be useful,
--- but WITHOUT ANY WARRANTY; without even the implied warranty of
--- MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
--- GNU General Public License for more details.
---
--- You should have received a copy of the GNU General Public License
--- along with this program; see the file COPYING.  If not, write to
--- the Free Software Foundation, Inc., 51 Franklin Street,
--- Boston, MA 02110-1301, USA.
-
-library ieee;
-use ieee.std_logic_1164.all;
-
-entity top_tb is
-
-end top_tb;
-
-architecture behavior of top_tb is
-
-	component top
-	port (
-		MCU_D			:	inout	std_logic_vector(7 downto 0);
-		MCU_DIR		:	in		std_logic;
-		MCU_MODE		:	in		std_logic;
-		MCU_STROBE	:	in		std_logic;
-		MCU_ADDR		:	in		std_logic;
-		
-		TP_U			:	out	std_logic;
-		TP_D			:	out	std_logic;
-		TP_L			:	out	std_logic;
-		TP_R			:	out	std_logic;
-		
-		SW_SEL		:	in		std_logic;
-		SW_ROT_A		:	in		std_logic;
-		SW_ROT_B		:	in		std_logic;
-		SW_U			:	in		std_logic;
-		SW_D			:	in		std_logic;
-		SW_L			:	in		std_logic;
-		SW_R			:	in		std_logic;
-		
-		LCD_RESETX	:	out	std_logic;
-		LCD_RS		:	out	std_logic;
-		LCD_WRX		:	out	std_logic;
-		LCD_RDX		:	out	std_logic;
-		LCD_DB		:	inout	std_logic_vector(17 downto 0);
-		LCD_TE		:	in		std_logic
-	);
-	end component;
-
-	signal mcu_d : std_logic_vector(7 downto 0);
-	signal mcu_strobe : std_logic;
-	signal mcu_dir : std_logic;
-	signal mcu_mode : std_logic;
-	signal mcu_addr : std_logic;
-  
-	signal tp_u : std_logic;
-	signal tp_d : std_logic;
-	signal tp_l : std_logic;
-	signal tp_r : std_logic;
-	
-	signal sw_sel : std_logic;
-	signal sw_rot_a : std_logic;
-	signal sw_rot_b : std_logic;
-	signal sw_u : std_logic;
-	signal sw_d : std_logic;
-	signal sw_l : std_logic;
-	signal sw_r : std_logic;
-  
-	signal lcd_resetx : std_logic;
-	signal lcd_rs : std_logic;
-	signal lcd_wrx : std_logic;
-	signal lcd_rdx : std_logic;
-	signal lcd_db : std_logic_vector(17 downto 0);
-	signal lcd_te : std_logic := '0';
-begin
-
-	uut : top
-	port map (
-	  MCU_D => mcu_d,
-	  MCU_STROBE => mcu_strobe,
-	  MCU_DIR => mcu_dir,
-	  MCU_MODE => mcu_mode,
-	  MCU_ADDR => mcu_addr,
-	  TP_U => tp_u,
-	  TP_D => tp_d,
-	  TP_L => tp_l,
-	  TP_R => tp_r,
-	  SW_SEL => sw_sel,
-	  SW_ROT_A => sw_rot_a,
-	  SW_ROT_B => sw_rot_b,
-	  SW_U => sw_u,
-	  SW_D => sw_d,
-	  SW_L => sw_l,
-	  SW_R => sw_r,
-	  LCD_RESETX => lcd_resetx,
-	  LCD_RS => lcd_rs,
-	  LCD_WRX => lcd_wrx,
-	  LCD_RDX => lcd_rdx,
-	  LCD_DB => lcd_db,
-	  LCD_TE => lcd_te
-	);
-
-	stimulus: process is
-	begin
-		sw_sel <= '0';
-		sw_rot_a <= '0';
-		sw_rot_b <= '0';
-		sw_u <= '0';
-		sw_d <= '0';
-		sw_l <= '0';
-		sw_r <= '0';
-		
-		mcu_d <= (others => 'Z');
-		mcu_mode <= '1';
-		mcu_dir <= '1';
-		mcu_addr <= '1';
-		mcu_strobe <= '1';
-		
-		wait for 50.0 ns;
-
-		-- Write to resistive touch panel
-		mcu_mode <= '0';	-- Target: I/O
-		mcu_dir <= '0';	-- Direction: MCU -> CPLD
-		mcu_addr <= '0';	-- LCD reset signal
-		wait for 19.6 ns;	-- 4 cycles: Wait for CPLD D to reach Hi-Z
-		mcu_d <= "11000101";
-		wait for 14.7 ns;	-- 3 cycles: Setup time on D before STROBE.
-		mcu_strobe <= '0';
-		wait for 9.8 ns;	-- 2 cycles
-		mcu_strobe <= '1';
-		wait for 49.0 ns;
-
-		-- Write to LCD (command, then 16-bit data)
-		mcu_mode <= '1';	-- Target: LCD
-		mcu_dir <= '0';	-- Direction: MCU -> CPLD
-		mcu_addr <= '0';	-- Address: RS = 0 (command)
-		wait for 19.6 ns;	-- 4 cycles: Wait for CPLD D to reach Hi-Z
-		
-		mcu_d <= "10100101";
-		wait for 14.7 ns;	-- 3 cycles: Setup time on D before STROBE.
-		mcu_strobe <= '0';
-		wait for 9.8 ns;	-- 2 cycles
-		mcu_d <= "00001111";
-		wait for 24.5 ns;	-- 5 cycles: Prop from D to LCD_DB[7:0], WRX# minimum low time.
-		mcu_strobe <= '1';
-		wait for 9.8 ns;	-- 2 cycles: Part of prop from STROBE to LCD_WRX, delay to keep RS after WRX deassert.
-		mcu_addr <= '1';	-- Address: RS = 1 (data)
-		wait for 9.8 ns;	-- 2 cycles: Part of prop from STROBE to LCD_WRX.
-		
-		mcu_d <= "01011010";
-		wait for 14.7 ns;	-- 3 cycles: Setup time on D before STROBE.
-		mcu_strobe <= '0';
-		wait for 9.8 ns;	-- 2 cycles
-		mcu_d <= "11110000";
-		wait for 24.5 ns;	-- 5 cycles: Prop from D to LCD_DB[7:0], WRX# minimum low time.
-		mcu_strobe <= '1';
-		wait for 19.6 ns;	-- 4 cycles: Prop from STROBE to LCD_WRX.
-		
-		mcu_d <= "01010101";
-		wait for 14.7 ns;	-- 3 cycles: Setup time on D before STROBE.
-		mcu_strobe <= '0';
-		wait for 9.8 ns;	-- 2 cycles
-		mcu_d <= "10101010";
-		wait for 24.5 ns;	-- 5 cycles: Prop from D to LCD_DB[7:0], WRX# minimum low time.
-		mcu_strobe <= '1';
-		wait for 19.6 ns;	-- 4 cycles: Prop from STROBE to LCD_WRX.
-		
-		-- Read from switches
-		mcu_d <= (others => 'Z');
-		mcu_mode <= '0';	-- Target: I/O
-		mcu_dir <= '1';	-- Direction: MCU <- CPLD
-		wait for 49.0 ns;
-		
-	end process;
-end architecture behavior;

hardware/portapack_h1/lcd_sw_sd.sch

@@ -1,656 +0,0 @@
-EESchema Schematic File Version 2
-LIBS:hackrf_expansion
-LIBS:wolfson
-LIBS:passive
-LIBS:lcd_kingtech
-LIBS:supply
-LIBS:io_expander
-LIBS:trs_jack
-LIBS:battery
-LIBS:mosfet
-LIBS:microphone
-LIBS:sd
-LIBS:ck
-LIBS:altera
-LIBS:regulator
-LIBS:tp
-LIBS:header
-LIBS:hole
-LIBS:sharebrained
-LIBS:fiducial
-LIBS:portapack_h1-cache
-EELAYER 25 0
-EELAYER END
-$Descr A4 11693 8268
-encoding utf-8
-Sheet 3 4
-Title "PortaPack H1"
-Date "21 Aug 2015"
-Rev "20150821"
-Comp "ShareBrained Technology, Inc."
-Comment1 "Copyright © 2014, 2015 Jared Boone"
-Comment2 "License: GNU General Public License, version 2"
-Comment3 ""
-Comment4 ""
-$EndDescr
-$Comp
-L GND #PWR030
-U 1 1 53A91602
-P 9800 1800
-F 0 "#PWR030" H 9800 1800 30  0001 C CNN
-F 1 "GND" H 9800 1730 30  0001 C CNN
-F 2 "" H 9800 1800 60  0000 C CNN
-F 3 "" H 9800 1800 60  0000 C CNN
-	1    9800 1800
-	0    1    1    0   
-$EndComp
-$Comp
-L GND #PWR031
-U 1 1 53A91608
-P 9800 5000
-F 0 "#PWR031" H 9800 5000 30  0001 C CNN
-F 1 "GND" H 9800 4930 30  0001 C CNN
-F 2 "" H 9800 5000 60  0000 C CNN
-F 3 "" H 9800 5000 60  0000 C CNN
-	1    9800 5000
-	0    1    1    0   
-$EndComp
-$Comp
-L +3.3V #PWR032
-U 1 1 53A9160E
-P 9700 1700
-F 0 "#PWR032" H 9700 1660 30  0001 C CNN
-F 1 "+3.3V" H 9700 1810 30  0000 C CNN
-F 2 "" H 9700 1700 60  0000 C CNN
-F 3 "" H 9700 1700 60  0000 C CNN
-	1    9700 1700
-	0    -1   -1   0   
-$EndComp
-$Comp
-L +3.3V #PWR033
-U 1 1 53A91614
-P 9700 1900
-F 0 "#PWR033" H 9700 1860 30  0001 C CNN
-F 1 "+3.3V" H 9700 2010 30  0000 C CNN
-F 2 "" H 9700 1900 60  0000 C CNN
-F 3 "" H 9700 1900 60  0000 C CNN
-	1    9700 1900
-	0    -1   -1   0   
-$EndComp
-$Comp
-L GND #PWR034
-U 1 1 53A91623
-P 9800 5700
-F 0 "#PWR034" H 9800 5700 30  0001 C CNN
-F 1 "GND" H 9800 5630 30  0001 C CNN
-F 2 "" H 9800 5700 60  0000 C CNN
-F 3 "" H 9800 5700 60  0000 C CNN
-	1    9800 5700
-	0    1    1    0   
-$EndComp
-Text Label 9100 4100 0    60   ~ 0
-LCD_DB7
-Text Label 9100 4200 0    60   ~ 0
-LCD_DB6
-Text Label 9100 4300 0    60   ~ 0
-LCD_DB5
-Text Label 9100 4400 0    60   ~ 0
-LCD_DB4
-Text Label 9100 4500 0    60   ~ 0
-LCD_DB3
-Text Label 9100 4600 0    60   ~ 0
-LCD_DB2
-Text Label 9100 4700 0    60   ~ 0
-LCD_DB1
-Text Label 9100 4800 0    60   ~ 0
-LCD_DB0
-$Comp
-L R R20
-U 1 1 53A91635
-P 8300 1350
-F 0 "R20" V 8380 1350 50  0000 C CNN
-F 1 "47K" V 8300 1350 50  0000 C CNN
-F 2 "ipc_resc:IPC_RESC1608X55N" H 8300 1350 60  0001 C CNN
-F 3 "" H 8300 1350 60  0000 C CNN
-F 4 "Yageo" V 8300 1350 60  0001 C CNN "Mfr"
-F 5 "RC0603FR-0747KL" V 8300 1350 60  0001 C CNN "Part"
-	1    8300 1350
-	1    0    0    1   
-$EndComp
-$Comp
-L GND #PWR035
-U 1 1 53A91640
-P 9700 2600
-F 0 "#PWR035" H 9700 2600 30  0001 C CNN
-F 1 "GND" H 9700 2530 30  0001 C CNN
-F 2 "" H 9700 2600 60  0000 C CNN
-F 3 "" H 9700 2600 60  0000 C CNN
-	1    9700 2600
-	0    1    1    0   
-$EndComp
-Text Notes 9050 6200 0    60   ~ 0
-LCD Mode:\n8080 MCU 16-bit bus interface I\nIM[3:0] = 0b0001, DB[15:0] active
-Text Label 9100 4000 0    60   ~ 0
-LCD_DB8
-Text Label 9100 3900 0    60   ~ 0
-LCD_DB9
-Text Label 9100 3800 0    60   ~ 0
-LCD_DB10
-Text Label 9100 3700 0    60   ~ 0
-LCD_DB11
-Text Label 9100 3600 0    60   ~ 0
-LCD_DB12
-Text Label 9100 3500 0    60   ~ 0
-LCD_DB13
-Text Label 9100 3400 0    60   ~ 0
-LCD_DB14
-Text Label 9100 3300 0    60   ~ 0
-LCD_DB15
-$Comp
-L KINGTECH_DW0240A2BZ_FPC J3
-U 1 1 53A91651
-P 10350 3550
-F 0 "J3" H 10350 5650 60  0000 C CNN
-F 1 "KINGTECH_DW0240A2BZ_FPC" H 10350 1250 60  0000 C CNN
-F 2 "molex:MOLEX_54132-40XX_LR" H 10250 3550 60  0001 C CNN
-F 3 "" H 10250 3550 60  0000 C CNN
-F 4 "FCI" H 10350 3550 60  0001 C CNN "Mfr"
-F 5 "62684-401100ALF" H 10350 3550 60  0001 C CNN "Part"
-	1    10350 3550
-	1    0    0    -1  
-$EndComp
-$Comp
-L R R19
-U 1 1 53A91657
-P 8300 2350
-F 0 "R19" V 8380 2350 50  0000 C CNN
-F 1 "47K" V 8300 2350 50  0000 C CNN
-F 2 "ipc_resc:IPC_RESC1608X55N" H 8300 2350 60  0001 C CNN
-F 3 "" H 8300 2350 60  0000 C CNN
-F 4 "Yageo" V 8300 2350 60  0001 C CNN "Mfr"
-F 5 "RC0603FR-0747KL" V 8300 2350 60  0001 C CNN "Part"
-	1    8300 2350
-	-1   0    0    -1  
-$EndComp
-$Comp
-L GND #PWR036
-U 1 1 53A9165D
-P 8300 2700
-F 0 "#PWR036" H 8300 2700 30  0001 C CNN
-F 1 "GND" H 8300 2630 30  0001 C CNN
-F 2 "" H 8300 2700 60  0000 C CNN
-F 3 "" H 8300 2700 60  0000 C CNN
-	1    8300 2700
-	1    0    0    -1  
-$EndComp
-$Comp
-L +1.8V #PWR037
-U 1 1 53A91663
-P 9700 5100
-F 0 "#PWR037" H 9700 5240 20  0001 C CNN
-F 1 "+1.8V" H 9700 5210 30  0000 C CNN
-F 2 "" H 9700 5100 60  0000 C CNN
-F 3 "" H 9700 5100 60  0000 C CNN
-	1    9700 5100
-	0    -1   -1   0   
-$EndComp
-$Comp
-L GND #PWR038
-U 1 1 53A9166C
-P 9700 3000
-F 0 "#PWR038" H 9700 3000 30  0001 C CNN
-F 1 "GND" H 9700 2930 30  0001 C CNN
-F 2 "" H 9700 3000 60  0000 C CNN
-F 3 "" H 9700 3000 60  0000 C CNN
-	1    9700 3000
-	0    1    1    0   
-$EndComp
-Wire Wire Line
-	9700 3000 9900 3000
-Wire Wire Line
-	9900 5000 9800 5000
-Wire Wire Line
-	9900 1800 9800 1800
-Wire Wire Line
-	9700 5100 9900 5100
-Wire Wire Line
-	9700 1900 9900 1900
-Wire Wire Line
-	9500 4900 9900 4900
-Wire Wire Line
-	9900 5200 9500 5200
-Wire Wire Line
-	9500 5300 9900 5300
-Wire Wire Line
-	9500 5400 9900 5400
-Wire Wire Line
-	9500 5500 9900 5500
-Wire Wire Line
-	9800 5700 9900 5700
-Wire Wire Line
-	9000 4800 9900 4800
-Wire Wire Line
-	9000 4700 9900 4700
-Wire Wire Line
-	9000 4600 9900 4600
-Wire Wire Line
-	9000 4500 9900 4500
-Wire Wire Line
-	9000 4400 9900 4400
-Wire Wire Line
-	9000 4300 9900 4300
-Wire Wire Line
-	9000 4200 9900 4200
-Wire Wire Line
-	9000 4100 9900 4100
-Wire Wire Line
-	9600 2100 9900 2100
-Wire Wire Line
-	8200 2000 9900 2000
-Wire Wire Line
-	9600 2200 9900 2200
-Wire Wire Line
-	9600 2500 9900 2500
-Wire Wire Line
-	9700 2600 9900 2600
-Wire Wire Line
-	9800 2700 9900 2700
-Wire Wire Line
-	9800 2800 9900 2800
-Wire Wire Line
-	9800 2900 9900 2900
-Wire Wire Line
-	9800 2300 9800 3200
-Connection ~ 9800 2800
-Connection ~ 9800 2600
-Connection ~ 9800 2700
-Wire Wire Line
-	9000 4000 9900 4000
-Wire Wire Line
-	9000 3900 9900 3900
-Wire Wire Line
-	9000 3800 9900 3800
-Wire Wire Line
-	9000 3700 9900 3700
-Wire Wire Line
-	9000 3600 9900 3600
-Wire Wire Line
-	9000 3500 9900 3500
-Wire Wire Line
-	9000 3400 9900 3400
-Wire Wire Line
-	9000 3300 9900 3300
-Wire Wire Line
-	8300 2000 8300 2100
-Connection ~ 8300 2000
-Wire Wire Line
-	8300 2600 8300 2700
-Wire Wire Line
-	9900 1600 9800 1600
-$Comp
-L MICROSD_DETSW J2
-U 1 1 53A8C6D0
-P 3900 6300
-F 0 "J2" H 3450 6950 60  0000 C CNN
-F 1 "MICROSD_DETSW" H 4050 6950 60  0000 C CNN
-F 2 "alps:ALPS_SCHA4B0100" H 3900 6300 60  0001 C CNN
-F 3 "" H 3900 6300 60  0000 C CNN
-F 4 "ALPS" H 3900 6300 60  0001 C CNN "Mfr"
-F 5 "SCHA4B0415" H 3900 6300 60  0001 C CNN "Part"
-	1    3900 6300
-	1    0    0    -1  
-$EndComp
-$Comp
-L GND #PWR039
-U 1 1 53A8C6D6
-P 3100 6300
-F 0 "#PWR039" H 3100 6300 30  0001 C CNN
-F 1 "GND" H 3100 6230 30  0001 C CNN
-F 2 "" H 3100 6300 60  0000 C CNN
-F 3 "" H 3100 6300 60  0000 C CNN
-	1    3100 6300
-	0    1    1    0   
-$EndComp
-$Comp
-L GND #PWR040
-U 1 1 53A8C6E2
-P 3100 6700
-F 0 "#PWR040" H 3100 6700 30  0001 C CNN
-F 1 "GND" H 3100 6630 30  0001 C CNN
-F 2 "" H 3100 6700 60  0000 C CNN
-F 3 "" H 3100 6700 60  0000 C CNN
-	1    3100 6700
-	0    1    1    0   
-$EndComp
-$Comp
-L C C27
-U 1 1 53AA73CE
-P 2800 7100
-F 0 "C27" H 2850 7200 50  0000 L CNN
-F 1 "100N" H 2850 7000 50  0000 L CNN
-F 2 "ipc_capc:IPC_CAPC1005X55N" H 2800 7100 60  0001 C CNN
-F 3 "" H 2800 7100 60  0000 C CNN
-F 4 "Murata" H 2800 7100 60  0001 C CNN "Mfr"
-F 5 "GRM155R61A104KA01" H 2800 7100 60  0001 C CNN "Part"
-	1    2800 7100
-	-1   0    0    -1  
-$EndComp
-$Comp
-L GND #PWR041
-U 1 1 53A8C6EF
-P 2400 7400
-F 0 "#PWR041" H 2400 7400 30  0001 C CNN
-F 1 "GND" H 2400 7330 30  0001 C CNN
-F 2 "" H 2400 7400 60  0000 C CNN
-F 3 "" H 2400 7400 60  0000 C CNN
-	1    2400 7400
-	1    0    0    -1  
-$EndComp
-$Comp
-L GND #PWR042
-U 1 1 53A8C6F5
-P 4200 7200
-F 0 "#PWR042" H 4200 7200 30  0001 C CNN
-F 1 "GND" H 4200 7130 30  0001 C CNN
-F 2 "" H 4200 7200 60  0000 C CNN
-F 3 "" H 4200 7200 60  0000 C CNN
-	1    4200 7200
-	1    0    0    -1  
-$EndComp
-$Comp
-L CK_TSWB-3N-CB SW1
-U 1 1 53A8C6FD
-P 2500 1450
-F 0 "SW1" H 2500 2050 60  0000 C CNN
-F 1 "CK_TSWB-3N-CB" H 2500 850 60  0000 C CNN
-F 2 "ck:CK_TSWB-3N-CB222_LFS" H 2500 1450 60  0001 C CNN
-F 3 "" H 2500 1450 60  0000 C CNN
-F 4 "C&K" H 2500 1450 60  0001 C CNN "Mfr"
-F 5 "TSWB-3N-CB111 LFS" H 2500 1450 60  0001 C CNN "Part"
-	1    2500 1450
-	1    0    0    -1  
-$EndComp
-$Comp
-L GND #PWR043
-U 1 1 53A8C70A
-P 1400 2000
-F 0 "#PWR043" H 1400 2000 30  0001 C CNN
-F 1 "GND" H 1400 1930 30  0001 C CNN
-F 2 "" H 1400 2000 60  0000 C CNN
-F 3 "" H 1400 2000 60  0000 C CNN
-	1    1400 2000
-	1    0    0    -1  
-$EndComp
-$Comp
-L GND #PWR044
-U 1 1 53A8C710
-P 3600 2000
-F 0 "#PWR044" H 3600 2000 30  0001 C CNN
-F 1 "GND" H 3600 1930 30  0001 C CNN
-F 2 "" H 3600 2000 60  0000 C CNN
-F 3 "" H 3600 2000 60  0000 C CNN
-	1    3600 2000
-	1    0    0    -1  
-$EndComp
-$Comp
-L GND #PWR045
-U 1 1 53A8C716
-P 4000 7200
-F 0 "#PWR045" H 4000 7200 30  0001 C CNN
-F 1 "GND" H 4000 7130 30  0001 C CNN
-F 2 "" H 4000 7200 60  0000 C CNN
-F 3 "" H 4000 7200 60  0000 C CNN
-	1    4000 7200
-	1    0    0    -1  
-$EndComp
-$Comp
-L C C26
-U 1 1 53A8C71C
-P 2400 7100
-F 0 "C26" H 2450 7200 50  0000 L CNN
-F 1 "10U" H 2450 7000 50  0000 L CNN
-F 2 "ipc_capc:IPC_CAPC2012X140N" H 2400 7100 60  0001 C CNN
-F 3 "" H 2400 7100 60  0000 C CNN
-F 4 "Murata" H 2400 7100 60  0001 C CNN "Mfr"
-F 5 "GRM21BR61A106KE19" H 2400 7100 60  0001 C CNN "Part"
-	1    2400 7100
-	-1   0    0    -1  
-$EndComp
-$Comp
-L GND #PWR046
-U 1 1 53A8C722
-P 2800 7400
-F 0 "#PWR046" H 2800 7400 30  0001 C CNN
-F 1 "GND" H 2800 7330 30  0001 C CNN
-F 2 "" H 2800 7400 60  0000 C CNN
-F 3 "" H 2800 7400 60  0000 C CNN
-	1    2800 7400
-	1    0    0    -1  
-$EndComp
-$Comp
-L +3.3V #PWR047
-U 1 1 53A8C728
-P 2800 5700
-F 0 "#PWR047" H 2800 5660 30  0001 C CNN
-F 1 "+3.3V" H 2800 5810 30  0000 C CNN
-F 2 "" H 2800 5700 60  0000 C CNN
-F 3 "" H 2800 5700 60  0000 C CNN
-	1    2800 5700
-	1    0    0    -1  
-$EndComp
-Wire Wire Line
-	2400 6100 2400 6900
-Wire Wire Line
-	2800 7300 2800 7400
-Connection ~ 2800 6100
-Wire Wire Line
-	2800 5700 2800 6900
-Wire Wire Line
-	2200 5800 3200 5800
-Wire Wire Line
-	2200 5900 3200 5900
-Wire Wire Line
-	2200 6000 3200 6000
-Wire Wire Line
-	2200 6200 3200 6200
-Wire Wire Line
-	2200 6400 3200 6400
-Wire Wire Line
-	2200 6500 3200 6500
-Wire Wire Line
-	3200 6300 3100 6300
-Wire Wire Line
-	2400 6100 3200 6100
-Wire Wire Line
-	2400 7300 2400 7400
-Wire Wire Line
-	4200 7100 4200 7200
-Wire Wire Line
-	1400 1000 1500 1000
-Wire Wire Line
-	1400 1100 1500 1100
-Wire Wire Line
-	1400 1200 1500 1200
-Wire Wire Line
-	3500 1000 3600 1000
-Wire Wire Line
-	3600 1100 3500 1100
-Wire Wire Line
-	3600 1200 3500 1200
-Wire Wire Line
-	3600 1300 3500 1300
-Wire Wire Line
-	3500 1900 3600 1900
-Wire Wire Line
-	3600 1900 3600 2000
-Wire Wire Line
-	1500 1900 1400 1900
-Wire Wire Line
-	1400 1900 1400 2000
-Wire Wire Line
-	4000 7100 4000 7200
-$Comp
-L KINGTECH_DW0240A2BZ_PANEL LCD1
-U 1 1 53A8C752
-P 8000 4600
-F 0 "LCD1" H 8000 5650 60  0000 C CNN
-F 1 "KINGTECH_DW0240A2BZ_PANEL" H 8000 3650 60  0000 C CNN
-F 2 "lcd_kingtech:KINGTECH_DW0240A2BZ_PANEL" H 8000 4600 60  0001 C CNN
-F 3 "" H 8000 4600 60  0000 C CNN
-	1    8000 4600
-	1    0    0    -1  
-$EndComp
-Wire Bus Line
-	8800 2900 8900 2900
-Wire Bus Line
-	8900 2900 8900 4700
-Entry Wire Line
-	8900 3200 9000 3300
-Entry Wire Line
-	8900 3300 9000 3400
-Entry Wire Line
-	8900 3400 9000 3500
-Entry Wire Line
-	8900 3500 9000 3600
-Entry Wire Line
-	8900 3600 9000 3700
-Entry Wire Line
-	8900 3700 9000 3800
-Entry Wire Line
-	8900 3800 9000 3900
-Entry Wire Line
-	8900 3900 9000 4000
-Entry Wire Line
-	8900 4000 9000 4100
-Entry Wire Line
-	8900 4100 9000 4200
-Entry Wire Line
-	8900 4200 9000 4300
-Entry Wire Line
-	8900 4300 9000 4400
-Entry Wire Line
-	8900 4400 9000 4500
-Entry Wire Line
-	8900 4500 9000 4600
-Entry Wire Line
-	8900 4600 9000 4700
-Entry Wire Line
-	8900 4700 9000 4800
-Text HLabel 8800 2900 0    60   BiDi ~ 0
-LCD_DB[15..0]
-Text HLabel 9600 2100 0    60   Input ~ 0
-LCD_RS
-Text HLabel 9600 2200 0    60   Input ~ 0
-LCD_RD#
-Text HLabel 9600 2500 0    60   Input ~ 0
-LCD_WR#
-Text HLabel 8200 2000 0    60   Input ~ 0
-LCD_RESET#
-Text HLabel 8200 1000 0    60   Input ~ 0
-LCD_BACKLIGHT
-Text HLabel 9500 4900 0    60   Output ~ 0
-LCD_TE
-Text HLabel 9500 5200 0    60   BiDi ~ 0
-TP_R
-Text HLabel 9500 5300 0    60   BiDi ~ 0
-TP_D
-Text HLabel 9500 5400 0    60   BiDi ~ 0
-TP_L
-Text HLabel 9500 5500 0    60   BiDi ~ 0
-TP_U
-Text HLabel 1400 1000 0    60   Output ~ 0
-SW_SEL
-Text HLabel 1400 1100 0    60   Output ~ 0
-SW_ROT_A
-Text HLabel 1400 1200 0    60   Output ~ 0
-SW_ROT_B
-Text HLabel 3600 1000 2    60   Output ~ 0
-SW_D
-Text HLabel 3600 1100 2    60   Output ~ 0
-SW_R
-Text HLabel 3600 1200 2    60   Output ~ 0
-SW_U
-Text HLabel 3600 1300 2    60   Output ~ 0
-SW_L
-Text HLabel 2200 5800 0    60   BiDi ~ 0
-SD_DAT2
-Text HLabel 2200 5900 0    60   BiDi ~ 0
-SD_DAT3
-Text HLabel 2200 6000 0    60   BiDi ~ 0
-SD_CMD
-Text HLabel 2200 6200 0    60   Input ~ 0
-SD_CLK
-Text HLabel 2200 6400 0    60   BiDi ~ 0
-SD_DAT0
-Text HLabel 2200 6500 0    60   BiDi ~ 0
-SD_DAT1
-Text HLabel 2200 6800 0    60   Output ~ 0
-SD_CD
-Wire Wire Line
-	9800 3100 9900 3100
-Connection ~ 9800 2900
-Wire Wire Line
-	9800 3200 9900 3200
-Connection ~ 9800 3100
-Wire Wire Line
-	9900 2400 9800 2400
-Wire Wire Line
-	9900 2300 9800 2300
-Connection ~ 9800 2400
-Wire Wire Line
-	3200 6800 2200 6800
-Wire Wire Line
-	3200 6700 3100 6700
-$Comp
-L MOSFET_N Q1
-U 1 1 53C5B6EB
-P 8700 950
-F 0 "Q1" H 8700 801 40  0000 R CNN
-F 1 "MOSFET_N" H 8700 1100 40  0000 R CNN
-F 2 "ipc_sot:IPC_SOT95P230X110-3N" H 8570 1052 29  0001 C CNN
-F 3 "" H 8700 950 60  0000 C CNN
-F 4 "NXP" H 8700 950 60  0001 C CNN "Mfr"
-F 5 "2N7002P,215" H 8700 950 60  0001 C CNN "Part"
-	1    8700 950 
-	1    0    0    -1  
-$EndComp
-$Comp
-L GND #PWR048
-U 1 1 53C5B707
-P 8800 1250
-F 0 "#PWR048" H 8800 1250 30  0001 C CNN
-F 1 "GND" H 8800 1180 30  0001 C CNN
-F 2 "" H 8800 1250 60  0000 C CNN
-F 3 "" H 8800 1250 60  0000 C CNN
-	1    8800 1250
-	1    0    0    -1  
-$EndComp
-Wire Wire Line
-	8800 1150 8800 1250
-Wire Wire Line
-	9900 1700 9700 1700
-Wire Wire Line
-	8200 1000 8500 1000
-Wire Wire Line
-	8300 1000 8300 1100
-Connection ~ 8300 1000
-$Comp
-L GND #PWR049
-U 1 1 53C5B8B4
-P 8300 1700
-F 0 "#PWR049" H 8300 1700 30  0001 C CNN
-F 1 "GND" H 8300 1630 30  0001 C CNN
-F 2 "" H 8300 1700 60  0000 C CNN
-F 3 "" H 8300 1700 60  0000 C CNN
-	1    8300 1700
-	1    0    0    -1  
-$EndComp
-Wire Wire Line
-	8300 1600 8300 1700
-Wire Wire Line
-	8800 750  8800 600 
-Wire Wire Line
-	8800 600  9800 600 
-Wire Wire Line
-	9800 600  9800 1600
-$EndSCHEMATC

hardware/portapack_h1/portapack_h1.pro

@@ -1,70 +0,0 @@
-update=Wednesday, July 15, 2015 'PMt' 10:20:27 PM
-version=1
-last_client=kicad
-[cvpcb]
-version=1
-NetIExt=net
-[cvpcb/libraries]
-EquName1=devcms
-[pcbnew]
-version=1
-LastNetListRead=
-UseCmpFile=1
-PadDrill=0.600000000000
-PadDrillOvalY=0.600000000000
-PadSizeH=1.500000000000
-PadSizeV=1.500000000000
-PcbTextSizeV=1.500000000000
-PcbTextSizeH=1.500000000000
-PcbTextThickness=0.300000000000
-ModuleTextSizeV=1.000000000000
-ModuleTextSizeH=1.000000000000
-ModuleTextSizeThickness=0.150000000000
-SolderMaskClearance=0.000000000000
-SolderMaskMinWidth=0.000000000000
-DrawSegmentWidth=0.200000000000
-BoardOutlineThickness=0.100000000000
-ModuleOutlineThickness=0.150000000000
-[pcbnew/libraries]
-LibDir=../../../library-kicad
-LibName1=sockets
-LibName2=connect
-LibName3=discret
-LibName4=pin_array
-LibName5=divers
-LibName6=smd_capacitors
-LibName7=smd_resistors
-LibName8=smd_crystal&oscillator
-LibName9=smd_dil
-LibName10=smd_transistors
-LibName11=libcms
-LibName12=display
-LibName13=led
-LibName14=dip_sockets
-LibName15=pga_sockets
-LibName16=valves
-[general]
-version=1
-[eeschema]
-version=1
-LibDir=../../../library-kicad
-[eeschema/libraries]
-LibName1=hackrf_expansion
-LibName2=wolfson
-LibName3=passive
-LibName4=lcd_kingtech
-LibName5=supply
-LibName6=io_expander
-LibName7=trs_jack
-LibName8=battery
-LibName9=mosfet
-LibName10=microphone
-LibName11=sd
-LibName12=ck
-LibName13=altera
-LibName14=regulator
-LibName15=tp
-LibName16=header
-LibName17=hole
-LibName18=sharebrained
-LibName19=fiducial

hardware/portapack_h1/portapack_h1.sch

@@ -1,330 +0,0 @@
-EESchema Schematic File Version 2
-LIBS:hackrf_expansion
-LIBS:wolfson
-LIBS:passive
-LIBS:lcd_kingtech
-LIBS:supply
-LIBS:io_expander
-LIBS:trs_jack
-LIBS:battery
-LIBS:mosfet
-LIBS:microphone
-LIBS:sd
-LIBS:ck
-LIBS:altera
-LIBS:regulator
-LIBS:tp
-LIBS:header
-LIBS:hole
-LIBS:sharebrained
-LIBS:fiducial
-LIBS:portapack_h1-cache
-EELAYER 25 0
-EELAYER END
-$Descr A4 11693 8268
-encoding utf-8
-Sheet 1 4
-Title "PortaPack H1"
-Date "21 Aug 2015"
-Rev "20150821"
-Comp "ShareBrained Technology, Inc."
-Comment1 "Copyright © 2014, 2015 Jared Boone"
-Comment2 "License: GNU General Public License, version 2"
-Comment3 ""
-Comment4 ""
-$EndDescr
-$Comp
-L HOLE1 H1
-U 1 1 5369BBC4
-P 9500 2000
-F 0 "H1" H 9500 2150 60  0000 C CNN
-F 1 "HOLE1" H 9500 1850 60  0000 C CNN
-F 2 "hole:HOLE_3200UM_VIAS" H 9500 2000 60  0001 C CNN
-F 3 "" H 9500 2000 60  0000 C CNN
-	1    9500 2000
-	1    0    0    -1  
-$EndComp
-$Comp
-L HOLE1 H2
-U 1 1 5369BBD8
-P 9500 2500
-F 0 "H2" H 9500 2650 60  0000 C CNN
-F 1 "HOLE1" H 9500 2350 60  0000 C CNN
-F 2 "hole:HOLE_3200UM_VIAS" H 9500 2500 60  0001 C CNN
-F 3 "" H 9500 2500 60  0000 C CNN
-	1    9500 2500
-	1    0    0    -1  
-$EndComp
-$Comp
-L HOLE1 H3
-U 1 1 5369BBEC
-P 9500 3000
-F 0 "H3" H 9500 3150 60  0000 C CNN
-F 1 "HOLE1" H 9500 2850 60  0000 C CNN
-F 2 "hole:HOLE_3200UM_VIAS" H 9500 3000 60  0001 C CNN
-F 3 "" H 9500 3000 60  0000 C CNN
-	1    9500 3000
-	1    0    0    -1  
-$EndComp
-$Comp
-L HOLE1 H4
-U 1 1 5369BC00
-P 9500 3500
-F 0 "H4" H 9500 3650 60  0000 C CNN
-F 1 "HOLE1" H 9500 3350 60  0000 C CNN
-F 2 "hole:HOLE_3200UM_VIAS" H 9500 3500 60  0001 C CNN
-F 3 "" H 9500 3500 60  0000 C CNN
-	1    9500 3500
-	1    0    0    -1  
-$EndComp
-$Comp
-L HOLE1 H5
-U 1 1 5369BC14
-P 9500 4000
-F 0 "H5" H 9500 4150 60  0000 C CNN
-F 1 "HOLE1" H 9500 3850 60  0000 C CNN
-F 2 "hole:HOLE_3200UM_VIAS" H 9500 4000 60  0001 C CNN
-F 3 "" H 9500 4000 60  0000 C CNN
-	1    9500 4000
-	1    0    0    -1  
-$EndComp
-$Sheet
-S 2800 1900 900  3300
-U 53A8BFC3
-F0 "audio" 50
-F1 "audio.sch" 50
-F2 "I2S0_SCK" I R 3700 2300 60 
-F3 "I2S0_TX_SDA" I R 3700 2500 60 
-F4 "I2S0_MCLK" I R 3700 2200 60 
-F5 "I2S0_WS" I R 3700 2400 60 
-F6 "SCL" I R 3700 2800 60 
-F7 "SDA" B R 3700 2900 60 
-F8 "I2S0_RX_SDA" O R 3700 2600 60 
-$EndSheet
-Wire Wire Line
-	9800 2500 9700 2500
-Wire Wire Line
-	9800 3000 9700 3000
-Wire Wire Line
-	9800 3500 9700 3500
-$Sheet
-S 7600 1900 900  3300
-U 53A9129D
-F0 "lcd_sw_sd" 50
-F1 "lcd_sw_sd.sch" 50
-F2 "LCD_RS" I L 7600 2400 60 
-F3 "LCD_RD#" I L 7600 2500 60 
-F4 "LCD_WR#" I L 7600 2600 60 
-F5 "LCD_RESET#" I L 7600 2100 60 
-F6 "LCD_TE" O L 7600 3000 60 
-F7 "SW_SEL" O L 7600 4300 60 
-F8 "SW_ROT_A" O L 7600 4100 60 
-F9 "SW_ROT_B" O L 7600 4200 60 
-F10 "SW_D" O L 7600 3900 60 
-F11 "SW_R" O L 7600 3800 60 
-F12 "SW_U" O L 7600 3700 60 
-F13 "SW_L" O L 7600 4000 60 
-F14 "SD_DAT2" B L 7600 5000 60 
-F15 "SD_DAT3" B L 7600 5100 60 
-F16 "SD_CMD" B L 7600 4700 60 
-F17 "SD_CLK" I L 7600 4600 60 
-F18 "SD_DAT0" B L 7600 4800 60 
-F19 "SD_DAT1" B L 7600 4900 60 
-F20 "SD_CD" O L 7600 4500 60 
-F21 "TP_R" B L 7600 3300 60 
-F22 "TP_D" B L 7600 3400 60 
-F23 "TP_L" B L 7600 3500 60 
-F24 "TP_U" B L 7600 3200 60 
-F25 "LCD_DB[15..0]" B L 7600 2700 60 
-F26 "LCD_BACKLIGHT" I L 7600 2000 60 
-$EndSheet
-Wire Bus Line
-	6600 2700 7600 2700
-$Sheet
-S 4700 1900 1900 3300
-U 53A8C780
-F0 "hackrf_if" 50
-F1 "hackrf_if.sch" 50
-F2 "LCD_TE" I R 6600 3000 60 
-F3 "SW_R" I R 6600 3800 60 
-F4 "SW_ROT_B" I R 6600 4200 60 
-F5 "SW_ROT_A" I R 6600 4100 60 
-F6 "SW_D" I R 6600 3900 60 
-F7 "SW_SEL" I R 6600 4300 60 
-F8 "SW_U" I R 6600 3700 60 
-F9 "SW_L" I R 6600 4000 60 
-F10 "LCD_RESET#" O R 6600 2100 60 
-F11 "LCD_RS" O R 6600 2400 60 
-F12 "LCD_RD#" O R 6600 2500 60 
-F13 "LCD_WR#" O R 6600 2600 60 
-F14 "TP_U" B R 6600 3200 60 
-F15 "TP_L" B R 6600 3500 60 
-F16 "TP_D" B R 6600 3400 60 
-F17 "TP_R" B R 6600 3300 60 
-F18 "I2S0_TX_SDA" O L 4700 2500 60 
-F19 "I2S0_WS" O L 4700 2400 60 
-F20 "I2S0_MCLK" O L 4700 2200 60 
-F21 "I2S0_SCK" O L 4700 2300 60 
-F22 "SDA" B L 4700 2900 60 
-F23 "SCL" O L 4700 2800 60 
-F24 "SD_CD" I R 6600 4500 60 
-F25 "SD_DAT2" B R 6600 5000 60 
-F26 "SD_DAT0" B R 6600 4800 60 
-F27 "SD_CMD" B R 6600 4700 60 
-F28 "SD_CLK" O R 6600 4600 60 
-F29 "SD_DAT3" B R 6600 5100 60 
-F30 "SD_DAT1" B R 6600 4900 60 
-F31 "I2S0_RX_SDA" I L 4700 2600 60 
-F32 "LCD_DB[15..0]" B R 6600 2700 60 
-F33 "LCD_BACKLIGHT" O R 6600 2000 60 
-$EndSheet
-Wire Wire Line
-	6600 2000 7600 2000
-Wire Wire Line
-	7600 2100 6600 2100
-Wire Wire Line
-	7600 2400 6600 2400
-Wire Wire Line
-	6600 2500 7600 2500
-Wire Wire Line
-	7600 2600 6600 2600
-Wire Wire Line
-	6600 3000 7600 3000
-Wire Wire Line
-	7600 3200 6600 3200
-Wire Wire Line
-	6600 3300 7600 3300
-Wire Wire Line
-	7600 3400 6600 3400
-Wire Wire Line
-	6600 3500 7600 3500
-Wire Wire Line
-	6600 3700 7600 3700
-Wire Wire Line
-	7600 3800 6600 3800
-Wire Wire Line
-	6600 3900 7600 3900
-Wire Wire Line
-	7600 4000 6600 4000
-Wire Wire Line
-	6600 4100 7600 4100
-Wire Wire Line
-	7600 4200 6600 4200
-Wire Wire Line
-	6600 4300 7600 4300
-Wire Wire Line
-	6600 4500 7600 4500
-Wire Wire Line
-	6600 4600 7600 4600
-Wire Wire Line
-	7600 4700 6600 4700
-Wire Wire Line
-	6600 4800 7600 4800
-Wire Wire Line
-	7600 4900 6600 4900
-Wire Wire Line
-	6600 5000 7600 5000
-Wire Wire Line
-	7600 5100 6600 5100
-Wire Wire Line
-	3700 2200 4700 2200
-Wire Wire Line
-	4700 2300 3700 2300
-Wire Wire Line
-	3700 2400 4700 2400
-Wire Wire Line
-	4700 2500 3700 2500
-Wire Wire Line
-	3700 2600 4700 2600
-Wire Wire Line
-	4700 2800 3700 2800
-Wire Wire Line
-	3700 2900 4700 2900
-Wire Wire Line
-	9700 2000 9800 2000
-Wire Wire Line
-	9800 2000 9800 4100
-Connection ~ 9800 2500
-Connection ~ 9800 3000
-Connection ~ 9800 3500
-$Comp
-L SHAREBRAINED LOGO1
-U 1 1 53B1AE0D
-P 6050 7000
-F 0 "LOGO1" H 6050 7050 60  0000 C CNN
-F 1 "SHAREBRAINED" H 6050 6950 60  0000 C CNN
-F 2 "sharebrained:sharebrained_text_300" H 6050 7000 60  0001 C CNN
-F 3 "" H 6050 7000 60  0000 C CNN
-	1    6050 7000
-	1    0    0    -1  
-$EndComp
-$Comp
-L PORTAPACK_H1 LOGO2
-U 1 1 53B1B509
-P 6050 7450
-F 0 "LOGO2" H 6050 7500 60  0000 C CNN
-F 1 "PORTAPACK_H1" H 6050 7400 60  0000 C CNN
-F 2 "sharebrained:portapack_text_300" H 6050 7450 60  0001 C CNN
-F 3 "" H 6050 7450 60  0000 C CNN
-	1    6050 7450
-	1    0    0    -1  
-$EndComp
-$Comp
-L FIDUCIAL FID1
-U 1 1 53B309AC
-P 4100 7100
-F 0 "FID1" H 4100 7225 60  0000 C CNN
-F 1 "FIDUCIAL" H 4100 6975 60  0000 C CNN
-F 2 "fiducial:FIDUCIAL_65MIL" H 4100 7100 60  0001 C CNN
-F 3 "" H 4100 7100 60  0000 C CNN
-	1    4100 7100
-	1    0    0    -1  
-$EndComp
-$Comp
-L FIDUCIAL FID2
-U 1 1 53B30B4C
-P 4100 7500
-F 0 "FID2" H 4100 7625 60  0000 C CNN
-F 1 "FIDUCIAL" H 4100 7375 60  0000 C CNN
-F 2 "fiducial:FIDUCIAL_65MIL" H 4100 7500 60  0001 C CNN
-F 3 "" H 4100 7500 60  0000 C CNN
-	1    4100 7500
-	1    0    0    -1  
-$EndComp
-$Comp
-L FIDUCIAL FID3
-U 1 1 53B30CEC
-P 4700 7100
-F 0 "FID3" H 4700 7225 60  0000 C CNN
-F 1 "FIDUCIAL" H 4700 6975 60  0000 C CNN
-F 2 "fiducial:FIDUCIAL_65MIL" H 4700 7100 60  0001 C CNN
-F 3 "" H 4700 7100 60  0000 C CNN
-	1    4700 7100
-	1    0    0    -1  
-$EndComp
-$Comp
-L FIDUCIAL FID4
-U 1 1 53B30E8C
-P 4700 7500
-F 0 "FID4" H 4700 7625 60  0000 C CNN
-F 1 "FIDUCIAL" H 4700 7375 60  0000 C CNN
-F 2 "fiducial:FIDUCIAL_65MIL" H 4700 7500 60  0001 C CNN
-F 3 "" H 4700 7500 60  0000 C CNN
-	1    4700 7500
-	1    0    0    -1  
-$EndComp
-$Comp
-L GND #PWR01
-U 1 1 53B3303D
-P 9800 4100
-F 0 "#PWR01" H 9800 4100 30  0001 C CNN
-F 1 "GND" H 9800 4030 30  0001 C CNN
-F 2 "" H 9800 4100 60  0000 C CNN
-F 3 "" H 9800 4100 60  0000 C CNN
-	1    9800 4100
-	1    0    0    -1  
-$EndComp
-Wire Wire Line
-	9700 4000 9800 4000
-Connection ~ 9800 4000
-$EndSCHEMATC

host/bin/switch_to_hackrf

@@ -1,11 +0,0 @@
-#!/bin/sh
-
-printf "Hold down the HackRF's DFU button (the button closest to the antenna jack)\n"
-printf "then plug the HackRF into a USB port on your computer.\n\n"
-printf "After the HackRF is plugged in, you may release the DFU button.\n"
-printf "Press any key to continue or ^c to abort\n"
-read
-
-dfu-util --device 1fc9:000c --download hackrf_one_usb_ram.dfu --reset
-sleep 2s
-hackrf_spiflash -w hackrf_one_usb_rom_to_ram.bin

host/bin/switch_to_portapack

@@ -1,11 +0,0 @@
-#!/bin/sh
-
-printf "Hold down the HackRF's DFU button (the button closest to the antenna jack)\n"
-printf "then plug the HackRF into a USB port on your computer.\n\n"
-printf "After the HackRF is plugged in, you may release the DFU button.\n"
-printf "Press any key to continue or ^c to abort\n"
-read
-
-dfu-util --device 1fc9:000c --download hackrf_one_usb_ram.dfu --reset
-sleep 2s
-hackrf_spiflash -w portapack-h1-firmware.bin