mirror of
https://github.com/eried/portapack-mayhem.git
synced 2024-12-11 16:54:21 -05:00
23 lines
794 B
Plaintext
23 lines
794 B
Plaintext
|
*****************************************************************************
|
||
|
|
** ChibiOS/RT port for Atmel AVR ATmega1280. **
|
||
|
|
*****************************************************************************
|
||
|
|
|
||
|
|
** TARGET **
|
||
|
|
|
||
|
|
The demo runs on an Arduino Mega board.
|
||
|
|
|
||
|
|
** The Demo **
|
||
|
|
|
||
|
|
The demo currently just prints the TestThread output on Serial0, which is
|
||
|
|
available on the board USB connector (FT232 converter), and toggles the LED
|
||
|
|
on PB7 (pin 13 on Arduino IDE) every second.
|
||
|
|
|
||
|
|
** Build Procedure **
|
||
|
|
|
||
|
|
The demo was built using the GCC AVR toolchain. It should build with WinAVR too!
|
||
|
|
|
||
|
|
** Notes **
|
||
|
|
|
||
|
|
This demo runs natively so the Arduino bootloader must be removed and the FUSEs
|
||
|
|
reprogrammed. The values used for fuses are LFUSE=0xe7 and HFUSE=0x99.
|