onionshare/docs/source/locale/tr/LC_MESSAGES/tor.po

# SOME DESCRIPTIVE TITLE.
# Copyright (C) Micah Lee, et al.
# This file is distributed under the same license as the OnionShare package.
# FIRST AUTHOR <EMAIL@ADDRESS>, 2020.
#
msgid ""
msgstr ""
"Project-Id-Version: OnionShare 2.3\n"
"Report-Msgid-Bugs-To: onionshare-dev@lists.riseup.net\n"
"POT-Creation-Date: 2022-07-04 17:16-0400\n"
"PO-Revision-Date: 2021-11-25 15:52+0000\n"
"Last-Translator: Oğuz Ersen <oguzersen@protonmail.com>\n"
"Language: tr\n"
"Language-Team: tr <LL@li.org>\n"
"Plural-Forms: nplurals=2; plural=n != 1;\n"
"MIME-Version: 1.0\n"
"Content-Type: text/plain; charset=utf-8\n"
"Content-Transfer-Encoding: 8bit\n"
"Generated-By: Babel 2.10.3\n"

#: ../../source/tor.rst:2
msgid "Connecting to Tor"
msgstr "Tor Bağlantısı Kurmak"

#: ../../source/tor.rst:4
msgid ""
"When OnionShare starts, it will show you a screen asking you to connect "
"to the Tor network."
msgstr ""

#: ../../source/tor.rst:8
msgid ""
"You can toggle on the switch \"Connect to Tor automatically\" before "
"clicking \"Connect to Tor\". This means that next time OnionShare starts,"
" it will automatically connect with its Tor connection settings from the "
"last session, instead of presenting you with the connection options. If "
"the connection fails, you can still try bridges or reconfigure Tor via "
"the \"Network Settings\" button."
msgstr ""

#: ../../source/tor.rst:11
msgid ""
"You can click \"Connect to Tor\" to begin the connection process. If "
"there are no problems with your network, including any attempts to block "
"your access to the Tor network, this should hopefully work the first "
"time."
msgstr ""

#: ../../source/tor.rst:13
msgid ""
"Or, if you want to manually configure Bridges or other Tor settings "
"before you connect, you can click \"Network Settings\"."
msgstr ""

#: ../../source/tor.rst:16
msgid "Automatic censorship circumvention"
msgstr ""

#: ../../source/tor.rst:18
msgid ""
"When you click \"Connect to Tor\", if OnionShare fails to connect, it "
"might be because Tor is censored in your country or on your local "
"network."
msgstr ""

#: ../../source/tor.rst:20
msgid "If this occurs, you will have these choices:"
msgstr ""

#: ../../source/tor.rst:22
msgid "Try again without a bridge"
msgstr ""

#: ../../source/tor.rst:23
msgid "Automatically determine my country from my IP address for bridge settings"
msgstr ""

#: ../../source/tor.rst:24
msgid "Manually select my country for bridge settings"
msgstr ""

#: ../../source/tor.rst:28
msgid ""
"If you choose the \"Try again without a bridge\" option, OnionShare will "
"retry connecting to Tor like normal, without attempting to bypass "
"censorship."
msgstr ""

#: ../../source/tor.rst:30
msgid ""
"The other two options will attempt to automatically bypass censorship "
"using Tor bridges. If your network provider is blocking access to the Tor"
" network, you can hopefully still connect to a Tor bridge, which will "
"then connect you to the Tor network, circumventing the censorship. Both "
"of these options use the Tor Project's Censorship Circumvention API to "
"provide you with bridge settings that should work for you. OnionShare "
"will temporarily use the `Meek "
"<https://gitlab.torproject.org/legacy/trac/-/wikis/doc/meek/>`_ domain-"
"fronting proxy to make a non-Tor connection from your computer to Tor's "
"Censorship Circumvention API. The Meek proxy hides the fact that you are "
"trying to find a way to connect to Tor."
msgstr ""

#: ../../source/tor.rst:36
msgid ""
"If you choose \"Automatically determine my country from my IP address for"
" bridge settings\", the Censorship Circumvention API will consider your "
"IP address (yes, your real IP address) to determine what country you "
"might reside in. Based on the country information, the API will try to "
"automatically find bridges that suit your location."
msgstr ""

#: ../../source/tor.rst:41
msgid ""
"If you choose \"Manually select my country for bridge settings\", the "
"Censorship API will find the bridges that suit the country that you "
"specified."
msgstr ""

#: ../../source/tor.rst:46
msgid "How automatic censorship circumvention works"
msgstr ""

#: ../../source/tor.rst:48
msgid ""
"If the Censorship Circumvention API finds bridges that it believes will "
"suit you, OnionShare will try to reconnect to Tor using those bridges. If"
" the API does not find any bridges for your location, OnionShare will ask"
" the API for \"fallback\" options, and then try to reconnect using those."
msgstr ""

#: ../../source/tor.rst:50
msgid ""
"If for some reason OnionShare fails to connect to the Censorship API "
"itself, or if the API returns an error message, OnionShare will attempt "
"to use the obfs4 built-in bridges."
msgstr ""

#: ../../source/tor.rst:52
msgid ""
"It's important to note that the requests to the Censorship Circumvention "
"API do not go over the Tor network (because if you could connect to Tor "
"already, you wouldn't need to connect to the API)."
msgstr ""

#: ../../source/tor.rst:54
msgid ""
"Even though it's hard for an adversary to discover where the Meek request"
" is going, this may still be risky for some users. Therefore, it is an "
"opt-in feature. The use of Meek and non-torified network requests are "
"limited only to making one or two requests to the Censorship "
"Circumvention API. Then Meek is stopped, and all further network requests"
" happen over the Tor network."
msgstr ""

#: ../../source/tor.rst:56
msgid ""
"If you are uncomfortable with making a request that doesn't go over the "
"Tor network, you can click \"Network Settings\" (or the Settings icon in "
"the bottom right corner, followed by the Tor Settings tab in the screen "
"that appears), and manually configure bridges. After you save any bridge "
"settings, OnionShare will try to reconnect using those bridges."
msgstr ""

#: ../../source/tor.rst:59
msgid "Manually configure Tor settings"
msgstr ""

#: ../../source/tor.rst:61
msgid ""
"You can get to the Tor settings by clicking \"Network Settings\" on the "
"welcome screen, or by clicking the \"⚙\" icon in the bottom-right corner "
"of the application, and then switch to the Tor Settings tab in the screen"
" that appears."
msgstr ""

#: ../../source/tor.rst:65
msgid ""
"Here are the different ways you can configure OnionShare to connect to "
"Tor:"
msgstr ""

#: ../../source/tor.rst:68
msgid "Use the Tor version built into OnionShare"
msgstr "OnionShare üzerindeki Tor sürümü kullanılsın"

#: ../../source/tor.rst:70
msgid ""
"This is the default, simplest and most reliable way that OnionShare "
"connects to Tor. For this reason, it's recommended for most users."
msgstr ""
"Bu varsayılan seçenektir, OnionShare ile Tor bağlantısı kurmanın en basit"
" ve en güvenilir yoludur. Bu nedenle çoğu kullanıcı için bu seçenek "
"önerilir."

#: ../../source/tor.rst:73
msgid ""
"When you open OnionShare, it launches an already configured ``tor`` "
"process in the background for OnionShare to use. It doesn't interfere "
"with other ``tor`` processes on your computer, so you can use the Tor "
"Browser or the system ``tor`` on their own."
msgstr ""
"OnionShare uygulamasını açtığınızda, kendisinin kullanması için arka "
"planda önceden yapılandırılmış bir ``tor`` işlemi başlatır. Bu "
"bilgisayarınızdaki diğer ``tor`` işlemlerine müdahale etmez, böylece Tor "
"Browser veya sistemin ``tor`` işlemini kendi başına kullanabilirsiniz."

#: ../../source/tor.rst:76
msgid "**Using bridges**"
msgstr ""

#: ../../source/tor.rst:78
#, fuzzy
msgid ""
"To use a bridge, you must select \"Use the Tor version built into "
"OnionShare\" and check the \"Use a bridge\" checkbox."
msgstr ""
"Bir köprü kullanmak için Tor Ayarları sekmesini açın. \"OnionShare "
"üzerindeki Tor sürümü kullanılsın\" seçeneğini seçmeli ve \"Köprü "
"kullan\" onay kutusunu işaretlemelisiniz."

#: ../../source/tor.rst:80
msgid ""
"Try using a built-in bridge first. Using `obfs4` or `snowflake` bridges "
"is recommended over using `meek-azure`."
msgstr ""
"Önce yerleşik bir köprü kullanmayı deneyin. `meek-azure` yerine `obfs4` "
"veya `snowflake` köprülerinin kullanılması tavsiye edilir."

#: ../../source/tor.rst:84
msgid ""
"If using a built-in bridge doesn't work, you can request a bridge from "
"torproject.org. You will have to solve a CAPTCHA in order to request a "
"bridge. (This makes it more difficult for governments or ISPs to block "
"access to Tor bridges.)"
msgstr ""
"Yerleşik bir köprü kullanmak işe yaramazsa, torproject.org'dan bir köprü "
"talep edebilirsiniz. Köprü talep etmek için bir CAPTCHA çözmeniz "
"gerekecek. (Bu, hükümetlerin veya ISS'lerin Tor köprülerine erişimi "
"engellemesini zorlaştırır.)"

#: ../../source/tor.rst:88
msgid ""
"You also have the option of using a bridge that you learned about from a "
"trusted source."
msgstr ""
"Ayrıca güvenilir bir kaynaktan öğrendiğiniz bir köprüyü kullanma "
"seçeneğiniz de vardır."

#: ../../source/tor.rst:91
msgid "Attempt auto-configuration with Tor Browser"
msgstr "Tor Browser ile otomatik yapılandırma denensin"

#: ../../source/tor.rst:93
msgid ""
"If you have `downloaded the Tor Browser <https://www.torproject.org>`_ "
"and don't want two ``tor`` processes running, you can use the ``tor`` "
"process from the Tor Browser. Keep in mind you need to keep Tor Browser "
"open in the background while you're using OnionShare for this to work."
msgstr ""
"`Tor Browser indirdiyseniz <https://www.torproject.org>`_ ve iki tane "
"``tor`` işleminin çalışmasını istemiyorsanız Tor Browser'ın ``tor`` "
"işlemini kullanabilirsiniz. Bunun çalışması için OnionShare kullanırken "
"arka planda Tor Browser uygulamasını açık tutmanız gerektiğini unutmayın."

#: ../../source/tor.rst:97
msgid "Using a system ``tor`` in Windows"
msgstr "Windows üzerinde sistem ``tor` hizmetini kullanmak"

#: ../../source/tor.rst:99
msgid ""
"This is fairly advanced. You'll need to know how edit plaintext files and"
" do stuff as an administrator."
msgstr ""
"Bu seçenek oldukça ileridir. Düz metin dosyalarını nasıl "
"düzenleyeceğinizi ve yönetici olarak işleri nasıl yapacağınızı bilmeniz "
"gerekir."

#: ../../source/tor.rst:101
msgid ""
"Download the Tor Windows Expert Bundle `from "
"<https://www.torproject.org/download/tor/>`_. Extract the compressed file"
" and copy the extracted folder to ``C:\\Program Files (x86)\\`` Rename "
"the extracted folder with ``Data`` and ``Tor`` in it to ``tor-win32``."
msgstr ""
"`Buradan <https://www.torproject.org/download/tor/>`_ Tor Windows Uzman "
"Paketini indirin. Sıkıştırılmış dosyayı ayıklayın ve ayıklanan klasörü "
"``C:\\Program Files (x86)\\`` içine taşıyın. ``Data`` ve ``Tor`` "
"klasörlerinin bulunduğu ayıklanmış klasörü ``tor-win32`` olarak yeniden "
"adlandırın."

#: ../../source/tor.rst:105
msgid ""
"Make up a control port password. (Using 7 words in a sequence like "
"``comprised stumble rummage work avenging construct volatile`` is a good "
"idea for a password.) Now open a command prompt (``cmd``) as an "
"administrator, and use ``tor.exe --hash-password`` to generate a hash of "
"your password. For example::"
msgstr ""
"Bir denetim kapı numarası parolası oluşturun. (Parola için ``içeren "
"yanılma araştır çalış intikam oluştur değişken`` gibi 7 sözcükten oluşan "
"bir dizi kullanmak iyi bir fikir olacaktır). Sonra yönetici olarak bir "
"komut istemi (``cmd``) açın ve parolanızın karıştırılan kodunu oluşturmak"
" için ``tor.exe --hash-password`` komutunu kullanın. Örneğin::"

#: ../../source/tor.rst:112
msgid ""
"The hashed password output is displayed after some warnings (which you "
"can ignore). In the case of the above example, it is "
"``16:00322E903D96DE986058BB9ABDA91E010D7A863768635AC38E213FDBEF``."
msgstr ""
"Karıştırılan parola çıktısı bazı uyarılardan sonra görüntülenir (bunları "
"göz ardı edebilirsiniz). Yukarıdaki örnek için bu "
"``16:00322E903D96DE986058BB9ABDA91E010D7A863768635AC38E213FDBEF`` "
"olacaktır."

#: ../../source/tor.rst:114
msgid ""
"Now create a new text file at ``C:\\Program Files (x86)\\tor-"
"win32\\torrc`` and put your hashed password output in it, replacing the "
"``HashedControlPassword`` with the one you just generated::"
msgstr ""
"Sonra ``C:\\Program Files (x86)\\tor-win32\\torrc`` konumunda yeni bir "
"metin dosyası oluşturun ve ``HashedControlPassword`` kısmını sizin "
"oluşturduğunuzla değiştirerek içine parolanızın karıştırılan çıktısını "
"koyun::"

#: ../../source/tor.rst:119
msgid ""
"In your administrator command prompt, install ``tor`` as a service using "
"the appropriate ``torrc`` file you just created (as described in "
"`<https://2019.www.torproject.org/docs/faq.html.en#NTService>`_). Like "
"this::"
msgstr ""
"Yönetici komut isteminizde, az önce oluşturduğunuz uygun ``torrc`` "
"dosyasını kullanarak ``tor`` işlemini bir hizmet olarak kurun (şurada "
"açıklandığı gibi "
"`<https://2019.www.torproject.org/docs/faq.html.en#NTService>`_). Bunun "
"gibi::"

#: ../../source/tor.rst:123
msgid "You are now running a system ``tor`` process in Windows!"
msgstr "Artık Windows üzerinde bir sistem ``tor`` işlemi çalıştırıyorsunuz!"

#: ../../source/tor.rst:125
#, fuzzy
msgid ""
"Open OnionShare, click the \"⚙\" icon in it, and switch to the Tor "
"Settings tab. Under \"How should OnionShare connect to Tor?\" choose "
"\"Connect using control port\", and set \"Control port\" to ``127.0.0.1``"
" and \"Port\" to ``9051``. Under \"Tor authentication settings\" choose "
"\"Password\" and set the password to the control port password you picked"
" above. Click the \"Test Connection to Tor\" button. If all goes well, "
"you should see \"Connected to the Tor controller\"."
msgstr ""
"OnionShare uygulamasını açın ve \"⚙\" simgesine tıklayın. \"OnionShare "
"ile Tor bağlantısı nasıl kurulmalı?\" altındaki \"Denetim kapı numarası "
"kullanarak bağlan\" seçeneğini seçin ve \"Denetim kapı numarası\" "
"değerini ``127.0.0.1`` ve \"Kapı numarası\" değerini ``9051`` olarak "
"ayarlayın. \"Tor kimlik doğrulama ayarları\" altında \"Parola\" "
"seçeneğini seçin ve parolayı yukarıda seçtiğiniz denetim kapı noktası "
"parolası olarak ayarlayın. \"Tor bağlantısını sına\" düğmesine tıklayın. "
"Her şey yolunda giderse, \"Tor denetleyicisi ile bağlantı kuruldu\" "
"ifadesini göreceksiniz."

#: ../../source/tor.rst:134
msgid "Using a system ``tor`` in macOS"
msgstr "macOS üzerinde sistem ``tor` işlemini kullanmak"

#: ../../source/tor.rst:136
msgid ""
"First, install `Homebrew <https://brew.sh/>`_ if you don't already have "
"it, and then install Tor::"
msgstr ""
"Henüz kurmadıysanız, önce `Homebrew <https://brew.sh/>`_ ve ardından Tor "
"kurun::"

#: ../../source/tor.rst:140
msgid "Now configure Tor to allow connections from OnionShare::"
msgstr ""
"Sonra Tor hizmetini OnionShare uygulamasından gelen bağlantılara izin "
"verecek şekilde yapılandırın::"

#: ../../source/tor.rst:147
msgid "And start the system Tor service::"
msgstr "Ve sistem Tor hizmetini başlatın::"

#: ../../source/tor.rst:151
#, fuzzy
msgid ""
"Open OnionShare, click the \"⚙\" icon in it, and switch to the Tor "
"Settings tab. Under \"How should OnionShare connect to Tor?\" choose "
"\"Connect using socket file\", and set the socket file to be "
"``/usr/local/var/run/tor/control.socket``. Under \"Tor authentication "
"settings\" choose \"No authentication, or cookie authentication\". Click "
"the \"Test Connection to Tor\" button."
msgstr ""
"OnionShare uygulamasını açın ve \"⚙\" simgesine tıklayın. \"OnionShare "
"ile Tor bağlantısı nasıl kurulmalı?\" altındaki \"Soket dosyası "
"kullanılarak bağlantı kurulsun\" seçeneğini seçin ve soket dosyasını "
"``/usr/local/var/run/tor/control.socket`` olarak ayarlayın. \"Tor kimlik "
"doğrulama ayarları\" altında \"Kimlik doğrulama yok, veya çerez "
"doğrulaması\" seçeneğini seçin. \"Tor bağlantısını sına\" düğmesine "
"tıklayın."

#: ../../source/tor.rst:157 ../../source/tor.rst:177
msgid "If all goes well, you should see \"Connected to the Tor controller\"."
msgstr ""
"Her şey yolunda giderse, \"Tor denetleyicisi ile bağlantı kuruldu\" "
"ifadesini göreceksiniz."

#: ../../source/tor.rst:160
msgid "Using a system ``tor`` in Linux"
msgstr "Linux üzerinde sistem ``tor` işlemini kullanmak"

#: ../../source/tor.rst:162
msgid ""
"First, install the ``tor`` package. If you're using Debian, Ubuntu, or a "
"similar Linux distro, It is recommended to use the Tor Project's "
"`official repository <https://support.torproject.org/apt/tor-deb-"
"repo/>`_."
msgstr ""
"Önce ``tor`` paketini kurun. Debian, Ubuntu veya benzer bir Linux "
"dağıtımı kullanıyorsanız, Tor projesinin `resmi deposunu "
"<https://support.torproject.org/apt/tor-deb-repo/>`_ kullanmanız "
"önerilir."

#: ../../source/tor.rst:164
msgid ""
"Next, add your user to the group that runs the ``tor`` process (in the "
"case of Debian and Ubuntu, ``debian-tor``) and configure OnionShare to "
"connect to your system ``tor``'s control socket file."
msgstr ""
"Ardından, kullanıcınızı ``tor`` işlemini çalıştıran gruba ekleyin (Debian"
" ve Ubuntu için bu ``debian-tor`` olacak) ve OnionShare uygulamasını "
"sisteminizin ``tor`` işleminin denetim soketi dosyasına bağlanacak "
"şekilde yapılandırın."

#: ../../source/tor.rst:166
msgid ""
"Add your user to the ``debian-tor`` group by running this command "
"(replace ``username`` with your actual username)::"
msgstr ""
"Bu komutu çalıştırarak kullanıcınızı ``debian-tor`` grubuna ekleyin "
"(``username`` ifadesini gerçek kullanıcı adınızla değiştirin)::"

#: ../../source/tor.rst:170
#, fuzzy
msgid ""
"Reboot your computer. After it boots up again, open OnionShare, click the"
" \"⚙\" icon in it, and switch to the Tor Settings tab. Under \"How should"
" OnionShare connect to Tor?\" choose \"Connect using socket file\". Set "
"the socket file to be ``/var/run/tor/control``. Under \"Tor "
"authentication settings\" choose \"No authentication, or cookie "
"authentication\". Click the \"Test Connection to Tor\" button."
msgstr ""
"Bilgisayarınızı yeniden başlatın. Yeniden başlatıldıktan sonra OnionShare"
" uygulamasını açın ve \"⚙\" simgesine tıklayın. \"OnionShare ile Tor "
"bağlantısı nasıl kurulmalı?\" altındaki \"Soket dosyası kullanılarak "
"bağlantı kurulsun\" seçeneğini seçin. Soket dosyasını "
"``/var/run/tor/control`` olarak ayarlayın. \"Tor kimlik doğrulama "
"ayarları\" altında \"Kimlik doğrulama yok, veya çerez doğrulaması\" "
"seçeneğini seçin. \"Tor Bağlantısını Test Et\" düğmesine tıklayın."

#~ msgid "Using a system Tor in Mac OS X"
#~ msgstr ""

#~ msgid ""
#~ "There are several options for how "
#~ "OnionShare should connect to Tor. You"
#~ " can change them in Settings, which"
#~ " you can get to by clicking the"
#~ " gear icon in the bottom-right "
#~ "of the window."
#~ msgstr ""

#~ msgid "Use Tor that is bundled with OnionShare"
#~ msgstr ""

#~ msgid ""
#~ "This is the default way that "
#~ "OnionShare connects to Tor, and it's "
#~ "also the simplest and most reliable "
#~ "way. For this reason, it's recommended"
#~ " for most users."
#~ msgstr ""

#~ msgid ""
#~ "When you open OnionShare, it will "
#~ "launch a Tor process in the "
#~ "background that's configured specifically for"
#~ " OnionShare to use. This Tor process"
#~ " won't interfere with other Tor "
#~ "processes on your computer, so you're"
#~ " free to run Tor Browser or use"
#~ " a system Tor in the background."
#~ msgstr ""

#~ msgid "Attempt automatic configuration with Tor Browser"
#~ msgstr ""

#~ msgid ""
#~ "You can configure OnionShare to connect"
#~ " to the Tor that comes with Tor"
#~ " Browser. First, `download Tor Browser "
#~ "<https://www.torproject.org>`_ here if you "
#~ "don't already have it. With this "
#~ "setting selected, you need to keep "
#~ "Tor Browser open in the background "
#~ "while you're using OnionShare."
#~ msgstr ""

#~ msgid "Using a system Tor in Windows"
#~ msgstr ""

#~ msgid ""
#~ "Download the Tor Windows Expert Bundle,"
#~ " which you can get `from here "
#~ "<https://www.torproject.org/download/tor/>`_. Extract the"
#~ " zip file and copy the extracted "
#~ "folder to ``C:\\Program Files (x86)\\``, "
#~ "and rename the folder to ``tor-"
#~ "win32``, so that inside that folder "
#~ "is the ``Data`` and ``Tor`` folders."
#~ msgstr ""

#~ msgid ""
#~ "Make up a control port password. "
#~ "I'm going to use ``comprised stumble "
#~ "rummage work avenging construct volatile`` "
#~ "as my password. Now open a command"
#~ " prompt as an administrator, and use"
#~ " ``tor.exe --hash-password`` to generate"
#~ " a hash of your password. For "
#~ "example::"
#~ msgstr ""

#~ msgid ""
#~ "The hashed password output is displayed"
#~ " after some warnings (which you can"
#~ " ignore). In my case, it was "
#~ "``16:00322E903D96DE986058BB9ABDA91E010D7A863768635AC38E213FDBEF``."
#~ msgstr ""

#~ msgid ""
#~ "Now create a new text file at "
#~ "``C:\\Program Files (x86)\\tor-win32\\torrc`` "
#~ "and put this in it, replacing the"
#~ " ``HashedControlPassword`` with the one you"
#~ " just generated::"
#~ msgstr ""

#~ msgid ""
#~ "In your administrator command prompt, "
#~ "install tor as a service using the"
#~ " appropriate ``torrc`` file you just "
#~ "created (see `here "
#~ "<https://2019.www.torproject.org/docs/faq.html.en#NTService>`_ "
#~ "for more information on doing this). "
#~ "Like this::"
#~ msgstr ""

#~ msgid "You're now running a system Tor in Windows!"
#~ msgstr ""

#~ msgid ""
#~ "Open OnionShare. Click the Settings "
#~ "icon. Under \"How should OnionShare "
#~ "connect to Tor?\" choose \"Connect using"
#~ " control port\", and set the control"
#~ " port host to ``127.0.0.1`` and the"
#~ " port to ``9051``. Under \"Tor "
#~ "authentication options\" choose \"Password\" "
#~ "and set the password to your "
#~ "password, in my case ``comprised stumble"
#~ " rummage work avenging construct "
#~ "volatile``. Click the \"Test Settings\" "
#~ "button. If all goes well, you "
#~ "should see successfully connected to "
#~ "tor."
#~ msgstr ""

#~ msgid "Using a system Tor in macOS"
#~ msgstr ""

#~ msgid ""
#~ "First, install `Homebrew <http://brew.sh/>`_ "
#~ "if you don't already have it. "
#~ "Then, install Tor::"
#~ msgstr ""

#~ msgid ""
#~ "Open OnionShare. Click the Settings "
#~ "icon. Under \"How should OnionShare "
#~ "connect to Tor?\" choose \"Connect using"
#~ " socket file\", and set the socket"
#~ " file to be "
#~ "``/usr/local/var/run/tor/control.socket``. Under \"Tor "
#~ "authentication options\" choose \"No "
#~ "authentication, or cookie authentication\". "
#~ "Click the \"Test Settings\" button. If"
#~ " all goes well, you should see "
#~ "successfully connected to tor."
#~ msgstr ""

#~ msgid "Using a system Tor in Linux"
#~ msgstr ""

#~ msgid ""
#~ "First, install the tor package. If "
#~ "you're using Debian, Ubuntu, or a "
#~ "similar Linux distro, I recommend you"
#~ " use Tor Project's `official repository "
#~ "<https://2019.www.torproject.org/docs/debian.html.en>`_. For "
#~ "example, in Ubuntu 20.04::"
#~ msgstr ""

#~ msgid ""
#~ "Next, add your user to the group"
#~ " that runs the Tor process (in "
#~ "the case of Debian and Ubuntu, "
#~ "``debian-tor``) and configure OnionShare to"
#~ " connect to your system Tor's control"
#~ " socket file."
#~ msgstr ""

#~ msgid ""
#~ "Reboot your computer. After it boots "
#~ "up again, open OnionShare. Click the "
#~ "Settings icon. Under \"How should "
#~ "OnionShare connect to Tor?\" choose "
#~ "\"Connect using socket file\", and set"
#~ " the socket file to be "
#~ "``/var/run/tor/control``. Under \"Tor authentication"
#~ " options\" choose \"No authentication, or"
#~ " cookie authentication\". Click the \"Test"
#~ " Settings\" button. If all goes well,"
#~ " you should see successfully connect "
#~ "to Tor."
#~ msgstr ""

#~ msgid ""
#~ "If your access to the internet is"
#~ " censored, you can configure OnionShare "
#~ "to connect to the Tor network "
#~ "using `Tor bridges "
#~ "<https://2019.www.torproject.org/docs/bridges.html.en>`_. If "
#~ "OnionShare successfully connects to Tor, "
#~ "you don't need to use a bridge."
#~ msgstr ""

#~ msgid "To configure bridges, open OnionShare settings."
#~ msgstr ""

#~ msgid ""
#~ "You can use the built-in obfs4 "
#~ "pluggable transports, the built-in "
#~ "meek_lite (Azure) pluggable transports, or "
#~ "custom bridges, which you can obtain "
#~ "from Tor's `BridgeDB "
#~ "<https://bridges.torproject.org/>`_. If you need "
#~ "to use a bridge, you should try"
#~ " the built-in obfs4 ones first."
#~ msgstr ""

#~ msgid ""
#~ "Download the Tor Windows Expert Bundle"
#~ " `from <https://www.torproject.org/download/tor/>`_. "
#~ "Extract the ZIP file and copy the"
#~ " extracted folder to ``C:\\Program Files"
#~ " (x86)\\`` Rename the extracted folder "
#~ "with ``Data`` and ``Tor`` in it to"
#~ " ``tor-win32``."
#~ msgstr ""

#~ msgid ""
#~ "Open OnionShare and click the \"⚙\" "
#~ "icon in it. Under \"How should "
#~ "OnionShare connect to Tor?\" choose "
#~ "\"Connect using control port\", and set"
#~ " \"Control port\" to ``127.0.0.1`` and "
#~ "\"Port\" to ``9051``. Under \"Tor "
#~ "authentication settings\" choose \"Password\" "
#~ "and set the password to the "
#~ "control port password you picked above"
#~ " Click the \"Test Connection to Tor\""
#~ " button. If all goes well, you "
#~ "should see \"Connected to the Tor "
#~ "controller\"."
#~ msgstr ""

#~ msgid ""
#~ "First, install `Homebrew <https://brew.sh/>`_ "
#~ "if you don't already have it. "
#~ "Then, install Tor::"
#~ msgstr ""

#~ msgid "Use the ``tor`` bundled with OnionShare"
#~ msgstr "OnionShare ile birlikte gelen ``tor`` işlemi kullanılsın"

#~ msgid "Using Tor bridges"
#~ msgstr "Tor köprülerini kullanmak"

#~ msgid "To configure bridges, click the \"⚙\" icon in OnionShare."
#~ msgstr ""
#~ "Köprüleri yapılandırmak için OnionShare "
#~ "uygulamasındaki \"⚙\" simgesine tıklayın."

#~ msgid ""
#~ "You can use the built-in obfs4 "
#~ "pluggable transports, the built-in "
#~ "meek_lite (Azure) pluggable transports, or "
#~ "custom bridges, which you can obtain "
#~ "from Tor's `BridgeDB "
#~ "<https://bridges.torproject.org/>`_. If you need "
#~ "to use a bridge, try the built-"
#~ "in obfs4 ones first."
#~ msgstr ""
#~ "Yerleşik obfs4 değiştirilebilir taşıyıcıları, "
#~ "yerleşik meek_lite (Azure) değiştirilebilir "
#~ "taşıyıcıları veya Tor `BridgeDB "
#~ "<https://bridges.torproject.org/>`_ adresinden "
#~ "edinebileceğiniz özel köprüleri kullanabilirsiniz."
#~ " Bir köprü kullanmanız gerekirse, önce "
#~ "yerleşik obfs4 olanları deneyin."

#~ msgid ""
#~ "Pick a way to connect OnionShare "
#~ "to Tor by clicking Network Settings "
#~ "from the welcome screen, or the "
#~ "Tor onion icon in the bottom right"
#~ " of the OnionShare window to open "
#~ "the Tor Settings tab."
#~ msgstr ""
#~ "OnionShare penceresinin sağ alt kısmındaki "
#~ "Tor onion simgesine tıklayarak ayarlara "
#~ "gidin ve OnionShare ile Tor bağlantısı"
#~ " kurmanın bir yolunu seçin."

#~ msgid "Getting Around Censorship"
#~ msgstr "Sansürden Kurtulma"

#~ msgid ""
#~ "If your access to the internet is"
#~ " censored, you can configure OnionShare "
#~ "to connect to the Tor network "
#~ "using `Tor bridges <https://tb-"
#~ "manual.torproject.org/bridges/>`_. If OnionShare "
#~ "connects to Tor without one, you "
#~ "don't need to use a bridge."
#~ msgstr ""
#~ "İnternet erişiminiz sansürleniyorsa, OnionShare "
#~ "uygulamasını Tor ağına `Tor köprüleri "
#~ "<https://tb-manual.torproject.org/bridges/>`_ kullanarak"
#~ " bağlanacak şekilde yapılandırabilirsiniz. "
#~ "OnionShare, Tor köprüsü olmadan bağlanıyorsa"
#~ " köprü kullanmanıza gerek yoktur."